Hardness measurement

Filter

 Leeb hardness testers, mobile, HMM, with printer

KERN & SOHN

Advanced features for demanding applications.

  • Impact (rebound) sensor: The bounce module is accelerated by a spring against the item being tested. Depending on how hard the object is, the kinetic energy of the module will be absorbed. The speed reduction will be measured and converted to Leeb hardness values.
  • External impact sensor (Type D) included
  • Automatic recognition of the impact (rebound) sensor connected to the HMM
  • Mobility: In comparison with stationary table-top devices and testing devices with an internal sensor, using the HMM offers the highest level of mobility and flexibility
  • All measurement directions possible (360°) thanks to an automatic compensation function
  • Standard block for calibration included (approx. 790 ± 40 HL)
  • Internal memory for up to 9 data groups, with up to 9 values per group forming the average value of the group
  • Mini statistics function: displays the measured result, the average value, the impact direction, date and time
  • Measurement value display: Rockwell (B & C), Vickers (HV), Brinell (HB), Shore (HSD), Leeb (HL), tensile strength (MPa)
  • Automatic unit conversion: The measuring result is automatically converted into all specified hardness units
  • Delivered in a hard carrying case
  • Wireless IR printer included for on-site printing of measurement protocols (battery operated)
...

 Hardness comparison plates for Shore hardness testers, HB / HD

KERN & SOHN

...

 Shore Hardness Testers, Digital, HD

KERN & SOHN

Shore hardness testers for hardness determination of plastics through penetration measurement

  • Typical application: Measurement of penetration depth (Shore).
  • Material thickness of the sample, min. 4 mm
  • Particularly recommended for internal comparison measurement. Standard calibrations e. g. to DIN 53505 are not possible because of very narrow standard tolerances
  • Can be attached to the test stands TI-AC (for Shore A and Shore A0) and TI-D (for Shore D)
...

 Test stand TVL, manual

KERN & SOHN

Manual test stand for highly accurate tensile and compressive force measurement, with length measurement.

  • For vertical and horizontal use
  • Precise measurement results
  • High level of security with repeated measurements
  • Large base plate with various holes for fixture mountings
  • Can be used for force gauges up to 500 N (not included)
  • Digital length meter: Zero setting possible, pre-length can be set manually
...

 Shore hardness testers, analogue, HB

KERN & SOHN

Shore hardness testers for hardness determination of plastics through penetration measurement

  • Typical application: Measurement of penetration depth (Shore).
  • Material thickness of the sample, min. 4 mm
  • Particularly recommended for internal comparison measurement. Standard calibrations e. g. to DIN 53505 are not possible because of very narrow standard tolerances
  • Can be attached to the test stands TI-AC (for Shore A and Shore A0) and TI-D (for Shore D)
...

 Hardness Test Kits

Tintometer
GHS02 GHS05

The test kits have been specially developed for the analysis of boiler, cooling and service water....

 Leeb hardness tester, mobile

KERN & SOHN

The Leeb hardness tester measures metallic samples and offers mobility and flexibility compared to stationary tabletop devices and testing devices with internal sensor.

  • External impact sensor
  • All measurement directions possible (360°) thanks to an automatic compensation function
  • Internal memory for up to 600 data groups
  • Mini statistics function: displays the measured result, the average value, the impact direction, date and time
  • Measurement value display: Rockwell (Type A, B, C), Vickers (HV), Shore (HS), Leeb (HL), Brinell (HB)
  • Automatic unit conversion: The measuring result is automatically converted into all specified hardness units
  • Measuring with tolerance range (limit-setting function):Upper and lower limiting can be programmed
  • Acoustic and visual signal
  • Matrix display: Backlit multi-function display
  • Robust metal housing
...

 Test stand TVL-XS, manual

KERN & SOHN

The redesigned, superfine spindle enables exact testing in a force-measurement range up to 100 N in particularly fine steps and, in conjunction with the fine-dosing crank, ensures safe, reliable operation. For testing of low levels of force with short distances, such as, testing keyboard overlays, biological samples, blister packs....

Press, Sample SMART Q

CEM

PO number Package size Price per package    
7678818

This product of our assortment corresponds with your search.

1 piece Login / Register here
shopping_cart

Durometer model A measuring range: 0-100 Shore 102 x 57 x 44 mm

Simex

PO number Package size Price per package    
6264996

This product of our assortment corresponds with your search.

1 piece Login / Register here
shopping_cart

Add to shopping cart