Disposable gloves, nitrile Sensitive, powder-free

The powder-free, lavender blue LABSOLUTE® disposable gloves Sensitive made of nitrile are flat with a rolled cuff and offer excellent elasticity and wearing comfort. A special after-treatment makes these LABSOLUTE® disposable gloves skin friendly and easy to put on. The gloves have textured finger tips....
Microscope slides, cut edges

LABSOLUTE® microscope slides made of soda-lime glass comply with DIN ISO 8037-1 and 8037-2. This means they are the ideal solution for excellent and reproducible microscopy results. The microscope slides, measuring approx. 76 x 26 mm, have a thickness of around 1 mm and are delivered pre-cleaned and ready for use. The 20 mm wide, coloured or colourless frosted area is at one end on one side....
Volumetric flasks, class A, with PE stopper, blue graduation

All LABSOLUTE® clear and amber volumetric flasks with accuracy class A comply with the DIN EN ISO 1042 standard. They are made of high-quality borosilicate glass 3.3 and calibrated to "In" (20 °C). All volumetric flasks are supplied with suitable stoppers made of glass or PE. A batch-specific certificate of conformity can be supplied on request....
With natural rubber / TEF septa

Crimp seals ND11 are made of aluminium. They are clear or lacquered in different colours and have a 5.5 mm hole. They are supplied with fitted septa made of a variety of materials.
These septa are temperature-resistant from -40 °C to 120 °C and ideal for multiple injections thanks to their excellent resealability properties....
Skin care cream, Skin Care 1

The LABSOLUTE® Skin Care 1 is a high-quality, easily absorbable, gently moisturising skincare cream containing natural oils and beeswax. The emulsion is silicone-free and is therefore also suitable for use within Hazard Analysis and Critical Control Points (HACCP) concepts. The product encourages skin regeneration and can also be used on the face....
Microscope slide folders, cardboard

The LABSOLUTE® folders are made of cardboard and available in two different sizes. The slides lie safely in recesses which feature thumb cuts for easy slide removal. The lid provides further protection against damage and contamination and a practicable overview of your preparations thanks to a printed index....
pH indicator strips

The CHEMSOLUTE® pH indicator strips enable fast and accurate pH value determination. The range offers suitable products for a wide variety of pH value intervals.
- High accuracy and easy legibility
- Stable carrier strips with coloured test fields
- Non-bleeding, no contamination of the medium
- 100 strips per pack
Wide-mouth bottles, natural, HDPE

The practical LABSOLUTE® wide-mouth bottles made of LDPE, HDPE or PP are particularly easy to fill and clean due to their wide opening. With 100 % tightly closing screw lids made of PP, they are ideal for shipping and storing liquid, powdery and paste-like samples.
...
Pipette tips in bags, non-sterile

LABSOLUTE® offers a complete assortment for your pipetting tasks - no matter whether packed in bags, within racks or as an efficient refill system: all pipette tips are part of a system in which the components can be exchanged. The pipette tips are made of pure PP and comply with EN ISO 8655. In combination with the LABSOLUTE® pipettes, they constitute the perfect pipetting unit. Thanks to their universal fit and the high-quality material, the tips guarantee a firm and absolutely tight hold on various pipette models. And all this with much less attachment and ejection forces. The fully automated production and packaging of the pipette tips under clean room conditions guarantee completely contamination-free working conditions with products which are certified free of DNase, RNase, human DNA and pyrogens - to ensure reproducible and consistent results....
Serological pipettes, sterile, PS

The serological pipettes from LABSOLUTE® are ideal for working with sterile solutions in the millilitre range and applications in cell culture.
- With filter plug
- Free of DNase, RNase and pyrogens
- Non-cytotoxic
- Quick and easy identification by colour coding
- Gamma sterilized (SAL 10-6)
Erlenmeyer flasks, with standard ground joint, borosilicate glass 3.3

The LABSOLUTE® Erlenmeyer flasks with a durable volume scale are made of high-quality borosilicate glass 3.3 and are therefore extremely temperature-resistant up to 500 °C. The wide-neck and narrow-neck flasks, as well as the flasks with standard ground joint comply with the valid standards. The flasks are resistant to cold lyes/alkaline solutions and strong acids, with the exception of hydrofluoric acid and hot, concentrated phosphoric acid....
Petri dishes, PS

The LABSOLUTE® petri dishes are made of crystal-clear PS and offer high optical clarity. The dishes with three vents support gas exchange and are ideal for short incubation times. Dishes without vents are best suited for anaerobic and long-term work. The Petri dishes are prepared and packed under aseptic conditions. Sterilisation for the sterile dishes is done by beta rays....
Disposable cuvettes for the VIS range

The LABSOLUTE® disposable cuvettes for the VIS and UV range feature optimised photometric properties and high transparence thanks to modern manufacturing methods. Furthermore, you benefit from the fact that all cuvettes within one packing unit are sorted according to their numbered cavities of origin. Consequently, you receive technically identical cuvettes which prevent deviations in extinction coefficient values. Supplied in practical, reclosable styrofoam racks....
Cellulose acetate membrane filters, white

LABSOLUTE® offers a wide selection of membrane filters for microfiltration. You can choose between several membrane materials, diameters and pore sizes. Usage of membrane filters is recommended both for filtration of air and fluid and is optimally suited in particular for retention of very small particles. Precisely defined micro pores and exceeding stability - this combination makes it a good choice for applications in the microbiological sector, as well as in the pharmaceutical, food and water analysis industry....
Micro tubes, PP

The LABSOLUTE® micro tubes are made of high-quality PP and are resistant to mechanical and chemical stress. Simple and safe opening and closing of the vessel allow safe handling for greater comfort.
- Free of DNase, RNase and pyrogens
- Non-sterile
- Guaranteed metal-free
- Precise graduations lines on 1.5 and 2.0 ml reaction vessels
- Puncturable cap
- Matted cap with labelling field
- Can be centrifuged up to 25000 x g (1.5 and 2.0 ml) and 20000 x g (0.5 ml)
- Autoclavable at 121 °C
Laboratory bottles, clear, with PP screw caps

LABSOLUTE® laboratory bottles are made of high-quality borosilicate glass 3.3 and are therefore extremely temperature-resistant up to 500 °C. They comply with EN ISO standard 4796-1. The bottles have a retrace code, a durable volume scale as well as a GL45 thread (GL32 thread for 50 ml bottles). The bottles as well as the closures are resistant against a wide range of chemicals....
Disposable cuvettes for the UV range

The LABSOLUTE® disposable cuvettes for the VIS and UV range feature optimised photometric properties and high transparence thanks to modern manufacturing methods. Furthermore, you benefit from the fact that all cuvettes within one packing unit are sorted according to their numbered cavities of origin. Consequently, you receive technically identical cuvettes which prevent deviations in extinction coefficient values. Supplied in practical, reclosable styrofoam racks....
Volumetric flasks, amber, class A, with PE stopper, white graduation

All LABSOLUTE® clear and amber volumetric flasks with accuracy class A comply with the DIN EN ISO 1042 standard. They are made of high-quality borosilicate glass 3.3 and calibrated to "In" (20 °C). All volumetric flasks are supplied with suitable stoppers made of glass or PE. A batch-specific certificate of conformity can be supplied on request....
With silicone / PTFE septa

Crimp seals ND11 are made of aluminium. They are clear or lacquered in different colours and have a 5.5 mm hole. They are supplied with fitted septa made of a variety of materials.
These septa are temperature-resistant from -60 °C to 200 °C and have a better purity than septa made of natural rubber or red rubber. However, they have less effective resealability properties and are therefore more suitable for single-injection applications....
Crystallizing dishes, with spout, borosilicate glass 3.3

LABSOLUTE® crystallizing dishes with or without spout are made of high-quality borosilicate glass 3.3 and are therefore extremely temperature-resistant up to 500 °C. Therefore the dishes can be easily autoclaved. They have a functional labelling field and are resistant to cold alkaline solutions/lyes and strong acids, with the exception of hydrofluoric acid and hot, concentrated phosphoric acid....