With Luer-Lock fitting.

GC syringes for all Perkin-Elmer autosampler e.g. Clarus. High reproducibility, low carry-over.

GC syringes for all Perkin-Elmer autosampler e.g. Clarus. High reproducibility, low carry-over.

Inlet Liner for Agilent 5890, 6850, 6890, 7890 und HP4890. Trajan's SGE inlet liners come as a complete, single packed unit.

• 5 or 25 packs, individually packed
• Complete with instrument appropriate o-rings and sealing rings
• Each pack is supplied with quality test results

GC syringes for Agilent autosampler 7673, 7683 and 6850

• With fixed or removable needle
• Two different needle diameter and tapered needles
• High reproducibility, low carry-over

Inlet Liner for Perkin-Elmer Autosystem and Clarus 500, 600. SGE's inlet liners come as a complete, single packed unit. 5 or 25 packs, individualy packed. Complete with instrument appropriate o-rings and sealing rings. Each pack supplied with quality test results.

Syringes for CTC Analytics CombiPal and GC PAL. High reproducibility, low carry-over.

5% Phenyl Polysilphenylene-siloxane. General purpose GC column for routine gas chromatographic analysis. Suitable replacement for: DB-5, DB-5ms, DB-5.625, XTI-5, Rtx-5ms, Ultra-2, HP-5, HP-5MS, HP5-TA, SPB-5, MDN-5S, CP-Sil8CB, Rxt-Sil 5MS, AT-5ms, VB-5, ZB-5, VF-5ms.

• Very low bleed
• Non-polar
• Extremely inert

70% Cyanopropyl Polysilphenylene-siloxane. Able to be solvent rinsed. Industry standard column for fatty acid methyl esters, carbonhydrates, pharmaceuticals, GC/MS applications. Suitable alternative to: DB-23, Rtx-2330, SP-2330, CP-Sil 88, SP2380, HP-23.

8 % Phenyl Polycarborane-siloxane. Ultra high temperature columns for polychlorinated biphenyl compounds (PCB), nitro-substituted aromatics, polynuclear aromatic hydrocarbons, pesticides and herbicides.

5% Phenyl Polycarborane siloxane. Ultra-high temperature columns for simulated distillation applications, general hydrocarbon profiles, pesticides, herbicides and for GCMS applications.

Polyethylene Glycol (PEG) in a SolGel matrix. Suitable replacement for: DB-Wax, Rtx- Wax, Stabilwax, HP20M, HP-Wax, HP-INNOWax, Supelcowax-10, AT-Wax, Nukol, CP, Wax 52CB, VB-WAX, ZB-WAX.

• Robust high-temperature column.
• Polar phase
• Low bleed and inert

High quality ferrules made of 100 % Graphite.

Inlet liner with advanced coating technology. The OptChem™ deactivation is a unique thick film that ensures minimal sample loss and increased system sensitivity. Suitable for trace level analysis, detection of volatile and organochlorine pesticides (OCPs), persistent organic pollutants (POPs), brominated flame retardants (BFRs), as well as general GC applications.

• Colour coded by geometry
• Pre-fitted with CRS ONE O-rings
• Recyclable, touchless packaging reduces the risk of contamination during installation
• Quality tested acc. to USEPA 8081 (organochlorine pesticides) and USEPA 8270 (semivolatile organic compounds)

Liners come individually packed complete with instrument appropriate o-rings and sealing rings. Each pack is supplied with quality test results. Further liners und pack sizes available on request.

Liners come individually packed complete with instrument appropriate o-rings and sealing rings.
Each pack is supplied with quality test results.
Further liners und pack sizes available on request.

Syringes for CTC Analytics CombiPal and GC PAL.

• High reproducibility, low carry-over
• For Thermo TriPlus

Fingertight fittings for HPLC tubing made of PEEK.

For use in LC, LCMS and automation technology. The polyetheretherketone (PEEK) tubing are a flexible alternative to stainless steel tubing in high pressure applications. The tubing are color coded to industry standards for easy identification of the inner diameter. They are inert to most commonly used solvents. Exceptions are very caustic reagents, strong acids and bases.

• Smooth inner surface
• Good chemical resistance
• Bio-inert and biocompatible
• Operating temperature up to max. 100 °C
• Pressure stable up to 483 bar (7000 psi, 48000 kPa), size dependent

All Septa are made with a high grade silicone material to minimize needle coring. These new materials meet or exceed industry standards, giving you reassurance in the quality of your work. All of these Septa are durable with excellent resealing properties and excellent solvent resistance.

GP = General Purpose Silicone Septa for non-demanding routine applications up to 200°C.
EC = High Temperature Silicone Septa, for significantly longer injection life, low bleed and low injection port adhesion.
MN = High Temperature Premium Silicone Septa for autosamplers, up to 400 injections per septum.
HT = BTO Silicone Septa, Bleed and temperature optimized, combined with outstanding mechanical properties.

Also available: Septa for instruments from Perkin-Elmer, Shimadzu, Thermo and Varian/Bruker.

Syringes for CTC Analytics CombiPal and GC PAL. High reproducibility, low carry-over.

Syringes for CTC Analytics CombiPal and GC PAL. High reproducibility, low carry-over.

Syringes for CTC Analytics CombiPal and GC PAL. High reproducibility, low carry-over.

Standard plunger protection syringe.

GC syringes for Agilent autosampler 7673, 7683 and 6850

• With fixed or removable needle
• Two different needle diameter and tapered needles
• High reproducibility, low carry-over

For Shimadzu AOC-14, AOC-17, AOC-20 and AOC-20i. Needle tip: cone.
Article 6.205 989 with GT plunger.

Syringes for CTC Analytics HTS, HTC and LC PAL (needle tip: LC). Gastight.

For 25 to 500 µl Syringes.

Gas filters are an essential part of your GC analysis as contaminants in gases can significantly impact the quality of results. Oxygen, hydrocarbons and moisture can lead to problems such as noisy baselines, moisture entering the GC column and excessive bleed.

• Heavy-walled aluminium tube
• High capacity filters
• Sintered stainless steel frits prevent particulate contamination

Polyethylene Glycol phase. GC column for analyses such as alcohol, free acids, fatty acid methyl esters, aromatics, solvents and essential oils. Suitable replacement for: Carbowax 20M, CP-Wax 52 CB, DB-WAX, Elite-WAX, HP-20M, HP-INNOWax RH-WAX, Rtx-Wax, Stabilwax, SUPELCOWAX 10, TG-WaxMS, VF-WAXms, ZB-WAX.

• Industry standard wax column
• Polar phase

Nitroterephtalic acid modified PEG. For low molecular weight acids, alcohols, aldehydes, acrylates and ketones. Suitable replacement for: DB-FFAP, HP-FFAP, Stabilwax-DA, CPWax-58CB.

• Polar phase
• Able to be solvent rinsed (water or methanol are not recommended for rinsing)

5% Phenyl / 95% Dimethyl Polysiloxane. Low bleed. General purpose GC column for all routine analyses such as aromatics, pesticides, herbicides, hydrocarbons. Suitable replacement for: DB-5, Rtx-5, HP-5, Ultra-2, PTE-5, SPB-5, MDN-5, CP-Sil 8CB, VB-5, ZB-5, VF-5ms.

Cyanopropyl Polysilphenylene. Polar phase. For environmental analyses, volatile organic substances, alcohol analyses and for the EPA method 624, USP G43 methods, 502.2, SW-846 and 8240 / 8260 methods. Suitable replacement for: DB-VRX, HP-624, OPTIMA 624, ELITE-624, 007-624, RTXVOLATILES, SPB-624, TRV1, CPSIL 13 CB, VOCOL, VB-624, CP-624.

50% Phenyl Polysilphenylene-siloxane. For a range of EPA methods (604, 608, 8060, 8081), pharmaceutical applications, triazines, herbicides and steroids. Suitable replacement for: OV-17, SP-2250, DB-17, DB-17ms, DB-17ht, Rtx-50, SPB-50, HP-50+, HP-17.

90% Cyanopropyl Polysilphenylene-siloxane. For the fast separation of fragrances, aromatics, pesticides, PCB, isomers of fatty acid methyl esters.

• Bonded phase
• Highly polar
• Thermally stable
• Able to be solvent rinsed

100% Dimethyl Polysiloxane. For the analysis of petroleum products. Suitable Replacement for: Petrocol DH, DB-Petro, HP-PONA, AT-Petro, Elite-PONA, ZB-1, 007-1-100-0.5F, Rtx-1PONA, CP Sil PONA.

• Non-polar phase for PONA analysis
• Detailed hydrocarbon analysis according to ASTM
• Crosslinked and washable
• Very high resolving power columns for complex samples

100% Dimethyl Polysiloxane. General purpose GC column for all routine analyses such as hydrocarbons, aromatics, pesticides, phenol, herbicides and amines. Suitable replacement for: DB-1, DB-Petro, HP-1, HP-1MS, Rtx-1, Ultra-1, SPB-1, SPB-1 Sulfur, Petrocol DH, CP-Sil 5CB, VB-1, ZB-1, VF-1ms.

• Low bleed
• Non-polar

14 % Cyanopropylphenyl Polysiloxane. For analysis of organochlorine pesticides. Suitable replacement for: DB-1701, Rtx-1701, SPB-7, HP-1701, CP-Sil 19CB, 007-1701, PE-1701, SP-1701.

• Low bleed
• Highly inert
• Able to be solvent rinsed

5% Phenyl Polysilphenylene-siloxane. For 5% GC-MS analysis and general purpose MS analysis. Suitable replacement for: DB-5ms, ZB-5ms, Rxi-5Sil MS, VF-5ms, CP-Sil 8 CB.

Cyanopropylphenyl Polysiloxane. For the analysis of volatile components of drinking water, chlorinated hydrocarbons, solvents and for the EPA method 624, USP G43 methods, SW-846 and 8240 / 8260 methods. Suitable replacement for: DB-624, OV-624, AT-624, HP-VOC, CP-Select624CB, 007-624, Rtx-Volatiles, VOCOL, ZB-624.

For Dioxins and related compounds (POPs, PCBs, PCDFs, PCDDs).

• Very low bleed
• Non-polar
• Extremely inert
• Ideal for GC-MS

100% Dimethyl Polysiloxane. For high temperature hydrocarbon analysis and ASTM methods D2887 and D6532. Suitable replacement for: DB-2887, DB-HT Sim Dis, HP-1, Petrocol 2887, Petrocol EX2887, Rtx-2887.

• Non-polar
• Low bleed

35 % Phenyl Polysilphenylene-siloxane. Suitable Replacement for: DB-35, DB-35ms, Rtx-35, HP-35, HP-35MS, SPB-35, MDN-35.

• Very low bleed
• Inert
• Mid polarity column
• Equivalent to USP phase G42
• High temperature
• Able to be solvent rinsed

35% Phenyl Polysilphenylene-siloxane. For environmental analyses, EPA 608, pesticides and herbicides. Suitable replacement for: DB-608, Rtx-35, SPB-608, HP-35, ZB-35.

Permethylated Beta-Cyclodextrin (Chiral). Suitable replacement for: Cyclodex-B, Rt-BDEXm, LIPODEX C. Phase for the separation of chiral compound e.g. separation of enantiomeric compounds found in natural products.

100% Dimethyl Polysiloxane in a SolGel matrix. Suitable Replacement for: DB-1, DB-Petro, HP-1, HP-1MS, Rtx-1, Ultra-1, SPB-1, SPB-1 Sulfur, Petrocol DH, CP-Sil 5CB, VB-1, ZB-1, VF-1ms.

• Less bleed
• Non-polar
• Highly inert
• Same selectivity as BP1