The soil sampler made from iron consists of 3 parts: a handle with rod, optional extensions and the hardened drill bits. For determining soil properties, moisture
and structure. Extension rods can extend the working depth of the Mole down to 5 m. Individually customisable.

Drill bits for different soil properties:
Clay and damp soil: With narrow side panels for minimum soil friction/resistance. The soil adheres to the bit very well
Sand: With broad side panels and therefore a large retention capacity for the sand
Coarse sand: With extra broad side panels for sampling sandy soils and very dry soils
Combination: Retains both strongly cohesive and less cohesive soils
Riverside: Very suitable for drilling in hard, encrusted soils and soils mixed with fine gravel. The drill cutters project from the drill itself, so that friction is greatly reduced
Gravel drill: With slightly rounded, oblique scoops. Any stones present are clamped between the drill sides.
Stone catcher: The stone catcher is used to collect and remove stones that prevent proper sampling

The aluminium bottle is particularly suited for storing, transport or sending substances and reference samples which have to be stored completely unaltered.

• With UN approval (60 - 5600 ml)
• Pure aluminium (AL99.5 material)
• PP screw cap with internal aluminium seal included

White. Without residues, free of undercuts, sterilisable.

Chemical resistant to a large extend. Trigger-action spray pump with continuously adjustable spray nozzle.

• Parts in contact with media made of PP, PE and stainless steel
• Nozzle diameter 0.6mm; nozzle is continuously adjustable
• Amount sprayed per stroke: 1.2ml ±0.1ml

Spraying upwards overhead is not possible with standard spray bottles. As soon as the suction tube is no longer immersed in liquid, you can't spray any more. Not so with our overhead spray bottle, Turn'n'Spray. It features a special technology that allows you to spray from any position. That means you can spray practically and conveniently from any angle and reach hard-to-access places easily and without straining. The high-quality, refillable spray bottle can be used again and again.

• Uninterrupted spraying, even upside down
• Parts in contact with media made of PP, PE, silicon and stainless steel
• Nozzle diameter 0.6mm; nozzle is continuously adjustable
• Amount sprayed per stroke: 1.2ml ±0.1ml

Stepless flow regulation. The micro setting screw allows very fine stepless flow control, the flow can also be shut off completely. The fully adjustable pressure plate squeezes the hose against the stable steel hook. The hose is compressed over a wide area in order to prevent it from being damaged. Easy-Click closure - Stopper can be opened and closed in any position - without tiresome screwing on and off. Stopper is with up to 140°C heat-resistant and chemical resistant plastic PVDF, the clamp is galvanised steel. Available in 3 sizes for hose diameters up to 20mm.

Gives a visual indication of liquid or gas flow in tubing. Operates in both directions and at any angle. Can accomodate flow rates down to approx. 150 ml/min. Maximum pressure: 2 bar. Food Safe.

White. The spoons are ideal for sampling powders, granules and pastes.

• Individually packed
• SteriPlast^® additionally gamma-sterilized
• Production, assembly and packaging acc. to Cleanroom class 7 (10000)
• According to EU food and FDA guidelines

White multi-purpose trays. Injection-moulded. Durable and resist flexing, with strong, rounded rim. Stackable and hygienic. Surface is easy-to-clean. Resistant to many acids and alkaline solutions. Food-safe. Temperature resistant up to 60 °C.

Spray bottles (HDPE) with pump vapouriser (PP, stainless steel) and safety cap for the pump. Liquids can be finely vapourised at the push of a button in an environmentally compatible way. The transparent bottles make identification of contents easy. The protective cover prevents unintentional pressing of the pump and acts as a dust cover.

Sterile laboratory bottle for use in laboratories and chemical handling areas. Good product presentation due to crystal-clear PET. Space-saving and absolutely leakproof. Ideal for storing and packing liquids.

• Sterile SAL 10^-3 (according to ISO 11137)
• With tamper-proof closure
• With moulded-in raised graduation

Scaled sampling tube manufactured in a clean room specially designed for disposable use. Due to the blue colour, it is also perfect for use in the food, animal feed and pharmaceutical industries. After sampling, the container can be closed and is leakproof. DispoDipper is completely manufactured in one piece and can be used for sampling and subsequent transport of the sample in one device. In this way, cross-contamination or sample impurities are almost impossible. For sampling, first remove the cover at the predetermined breaking point. Then take the sample with the sample container and close it securely. After sampling, the handle at the predetermined breaking point can be detached from the sample container. This allows for easy and space-saving transport of the sample.

• Individually packaged and optionally sterilised by gamma rays (SteriPlast^®)
• Production and packaging according to clean room class 7
• Complies with EU food requirements and FDA regulations

White. Due to their long, ergonomic and solid handles and pointed blades they can be easily pierced into paper and plastic bags. The spatulas are ideal for sampling of powder, granules and pastes.

• Individually packed
• Production, assembling and packaging acc. to Cleanroom class 7 (10000)
• According to EU food and FDA guidelines

Gives a visual indication of liquid or gas flow in tubing. Operates in both directions and at any angle. Can accomodate flow rates down to approx. 150 ml/min. Maximum pressure: 2 bar. Food Safe. Autoclavable. Good, chemically resistance.

Different tools can be attached to the telescopic rod (snap-in joint). The individual rods have been provided with an end stop. This means that one rod cannot accidentally slip out of another rod. The telescopic rods cannot be rotated radially.

• Increased rigidity by using cold-rolled profile rod
• Springs made of stainless steel

Tubing clamps can regulate or stop the flow through of tubings that carry fluids or gases. Stepless flow regulation: The knurled screw allows very fine stepless flow control. The flow can also be shut off completely. The fully adjustable pressure plate squeezes the hose against the stable steel hook. The hose is compressed over a wide area, in order to prevent it from being damaged, stop-it can be mounted on hoses after they have been connected. stop-it metal is extremely heat resistant and robust due to the steel and aluminum. The hose clamp is available in four different sizes up to a maximum hose diameter of 30mm.

The pressure sprayer is ideal to spray a wide range of liquids uniformly. The pressurised spray has a working pressure of 4 bar. Extension for spray lance 30 cm available as accessory.

• Wetted parts PE, PP, glass-fibre reinforced PA, V2A, FKM
• Bottle made of HDPE
• With short spray nozzle
• Left-handed and right-handed pistol control
• Adjustable spray jet
• Graduation up to 1500 ml
• Temperature max. 30 °C

TeleScoop is a versatile sampling system with exchangeable tools for a wide range of applications. The tools (angular beaker, pendulum beaker, bottle holder, stainless steel beaker and dip net e.g. for taking solid and organic samples from water courses) are attached to the rod by a practical snap-in joint. Ideal for sampling from baths, tanks, shafts, open water courses etc. Sampling depths down to 6 m can be reached with the adjustable telescopic aluminium rod.
Holds bottles up to max. 88mm diameter incl. 750ml bottle (Spare bottle Cat. No. 9.072 987). Suitable for plastic and glass bottles. With universal quick-action clamping strap.

White. The spoon spatula is a double spatula with a 0.5 ml spoon and a 17 mm spoon blade. The spoon spatula has many different uses in labs, as a sampling spoon, for measuring or transferring small amounts, as a scraper or for mixing and stirring. Specially designed for disposable use, resistant to chemicals and corrosion-proof.

• SteriPlast^®: Individually packed, additionally gamma-sterilized
• Production, assembly and packaging according to Cleanroom class 7 (10000)
• According to EU food and FDA guidelines

TeleScoop is a versatile sampling system with exchangeable tools for a wide range of applications. The tools (angular beaker, pendulum beaker, bottle holder, stainless steel beaker and dip net e.g. for taking solid and organic samples from water courses) are attached to the rod by a practical snap-in joint. Ideal for sampling from baths, tanks, shafts, open water courses etc. Sampling depths down to 6 m can be reached with the adjustable telescopic aluminium rod.
With individually variable angle adjustment.

Resistant to compression max. 1 bar.

• PVDF: excellent chemical resistance, transparent, suitable for food
• PP/PE: for industrial use, red/white
• Operating temperature: PVDF 0 to 40 °C, PP/PE 5 to 40 °C

Very stable hand scoop for various applications. Seamless connection of scoop and hollow handle, therefore without crevices and edges.

• Smooth, highly polished surface.
• Especially sturdy model
• Food safe

White/plain or coloured with labelling field . close-ithas a sandwich-type structure (aluminium/ paper) and seals the container hermetically (vapour barrier). The rear of the label is coated with a powerful adhesive. This means that close-it sticks firmly to most commercial containers, even to surfaces coated with fine powder, slightly moist or even frozen surfaces where conventional labels or adhesive tape will not stick.

close-it food & pharma ensures aswell the necessary success when resealing sample openings, as it reliably prevents products from escaping after sampling. The adhesive complies with the European guidelines for foodstuffs and FDA guidelines. Just like the original, close-it food & pharma has a barrier layer of aluminium foil, which makes the close-it food & pharma perfectly suited to sampling foodstuffs, pharmaceuticals, cosmetics, food additives, even frozen goods - any applications in which the product must not be contaminated by contact with the adhesive.

• With rotatable spout, preventing drips
• With tapered spout for bottles with narrow openings from diameter 6mm to 8mm
• Fits screw threads with G ¾"
• Pressure proof to 2 bar at 20 °C (without discharge bracket and grommet)
• Parts in contact with media made of PP, PE and PTFE
• Food safe