For test tubes, culture tubes and culture bottles.

• Aluminium screw cap (autoclavable / sterilisable)
• Plastic screw cap (steam-autoclavable with 121 °C / sterilisable)
• Complete with rubber gasket

Inoculation loop holder according to Kolle for 0.3 to 0.7 mm wire diameter. Stainless steel with handle. Fixed by union nut.

Alternative Inoculation loops, platinum-iridium Alternative Inoculation loops Wironit

Sterilisable. For culture growth, transport and storage. Heavy walled, thickness 1.1mm. Wide neck for easy inoculation and cleaning. Complete with plastic screw cap (steam-autoclavable with 121 °C / sterilisable) and rubber sealing gasket.

Alternative Tubes, culture, Soda-lime glass, screw cap

Autoclavable. For culture growth, transport and storage. Complete with aluminium or plastic screw cap and rubber sealing gasket. The 5 ml size has a frosted marking area.

Further sizes available on request.

Accessories Storage cases for culture tubes Alternative Culture tubes, Borosilicate glass 3.3, with plastic screw cap

Anodised in a choice of colours.
Special caps for sterile, but not hermetically sealing, closure of culture flasks and media bottles with straight, rimmed or rimless necks as indicated. With nichrome steel springs that clamp onto the outer wall of the container.
Cleaning advice available on request.

Alternative Metal caps Alternative Kapsenberg caps Alternative Glass caps, DURAN® Alternative Aluminium caps, pure aluminium

Accessories Anaerobic jars, stainless steel

Sterilisable. For culture growth, transport and storage. Heavy walled, thickness 1.1mm. Wide neck for easy inoculation and cleaning. Complete with aluminium screw cap (autoclavable / sterilisable) and rubber sealing gasket.

Alternative Tubes, culture, Soda-lime glass, screw cap

Inoculation loops made from stainless steel, special stainless steel wire or platinum-iridium wire (90/10). Can be heated to red heat. Length: 60 mm. Wire diameter: 0.5 mm.

Accessories Inoculation loop holder Accessories Inoculation loop stands

For the cultivation of anaerobic and microaerophilic microorganisms in a defined and rapidly generated gas atmosphere.The requested atmosphere may be reached under ideal conditions by two methods. Either by using chemical gas packs (anaerobe systems) or by manually evacuating the jars with a vacuum pump and flushing with gas afterwards (e.g. with nitrogen), in this case no chemical accessories are needed (except anaerobic jar eco and crystal eco). The jars are made of robust stainless steel or transparent PC.The lids are made of UV-resistant plastic or transparent polycarbonate with two corner valves incl. tube clips for vacuum hoses (5 mm i.d.) and with manometer for exact control of the vacuum or overpressure from -1 to 0.2 bar (except anaerobic jar eco and crystal eco). The optional racks are made of stainless steel providing holders for comfortable operation of the anaerobe systems.

Methods for reaching anaerobic conditions: 3 x times evacuating and filling gas, flushing with gas for 5 minutes and chemical gas production (GasPacks) for Anaerobic jars "small", "standard", "large" and "crystal". For Anaerobic jar "eco" flushing with gas for 5 minutes (Using GasPack-Kits).

Customized: Other equipment available upon request. Examples: customized lids, e.g. made of special or heat-resistant materials e.g. stainless steel, heat-resistant pressure gauges (up to 100 °C), also without cocks / manometer available.

Accessories Accessories for anaerobic jars

Anodised in a choice of colours. For sterile, but not hermetically sealing, closure of containers. With nichrome steel springs that clamp onto the outer wall of the container. Autoclavable.
Cleaning advice available on request.

Inoculation loop stand robust and sturdy made of plastic (autoclavable). Accomodate up to 6 inoculation loop holders at any one time.

Alternative Inoculation loops Wironit Alternative Inoculation loops, platinum-iridium

For easy plating.

For research and development only.

For sterilising, heating, flame sterilising. For use in every microbiological laboratory or in safety cabinets. Modern Bunsen burner with state-of-the-art safety features plus outstanding quality characteristics:

• Controlled burning time 1 sec to 120 min (selectable)
• Automatic safety shut-off (selectable)
• Overheating protection / burner control by sensors
• Precise economic flame regulation (stable flame in strong air current)
• Flame and ignition monitoring
• "Push-and-Twist" bayonet fixture for burner head, no tools needed for cleaning
• Tilting right or left

Operating status, safety notes and warnings pictures and full text (color display) written language for most international languages. Brilliant colour display. Unique Joy-Stick navigation. Operating modes: by hand or with foot pedal or motion sensor. Housing made of stainless steel and safety glass. UV- and solvent resistant. For case of cleaning and flame-sterilising. Suitable for use with natural gas (central gas) or butane/propane gas (gas cartridges). Integrated stand for tilting right or left. Safety standard acc. to DIN 30665 part 1, DIN-DVGW


schuett phoenix II eco: (with LED control lamp and foot-switch) Start flame by foot-switch or button (On/Off). Best suited for use in microbiological safety cabinets. Best price to performance ratio.
schuett phoenix II standard: (brilliant colour display, selection of native language, sensor and foot- switch) Start/Stop flame by activating sensor 1x or 2x, use foot switch or press button by hand. Continuous display of timer.
schuett phoenix II accu: (brilliant colour display, selection of native language, sensor and built-in extra heavy duty power cells) Start/stop flame by activating sensor 1x or 2x, use foot-switch or press button by hand. Continuous display of timer and battery power. Operates for up to 30 hours, intermittent use. Complete with battery charger for 3 hour recharging. Ideal for mobile usage.

Flame sterilization carousels semi- and fully automated: For precise and time-controlled flaming of different kinds of inoculating loops. Minimization of gas consumption, the life of the inoculating loops is significantly increased. The inoculating loop is placed into the carousel after use and is sterilized immediately after turning the holder in flaming position. Sterilization time infinitely adjustable. Designed for continuous work-flow with sample series in the Laminar Flow.

Semi-automated: schuett easyloop (for 6 Inoculating loop holders, included): Comfortable manual rotation,fully automated flaming process. For use with Safety Bunsen Burners schuett phoenix II standard and accu.
Sterilization time: 3 to 5 s (adjustable from 1 s to 120 min)
Fully automated: schuett flammy R (for 5 Inoculating loop holders, included): Fully automated rotation and inoculating. In combination with a standard gas-safety-burner (e.g. schuett phoenix II). Sterilization time: 2 to 10 s

Accessories Accessories for gas-safety burner schuett phoenix II Accessories Gas cartridges Accessories Gas lighter Accessories Piezoelectric gas lighter, Clipper Accessories Adapters for gas cartridges

Accessories Gas cartridges Accessories Gas lighter Accessories Piezoelectric gas lighter, Clipper

Accessories schuett count Colony Counter

Matt finish. Without internal clips. Loose-fit caps for sterile, but not hermetically sealing, closure of culture flasks and other containers. Can also be used as open specimen holders. Autoclavable.

Alternative Metal caps Alternative Kapsenberg caps Alternative Glass caps, DURAN® Alternative Metal caps, Erlenmeyer, Aluminium

For all beakers from 100 to 2000ml capacity. Comprises conical lid made of chemical-resistant plastic with stirrer bearing, two pipette openings and captive PTFE magnetic stirring bar with support shaft. Guarantees gentle running, with no de-coupling of the stirrer bar.

Dust-proof, rigid container for storing clean cells. Accommodates cells up to 55mm in height. Cells are immediately ready for use when required.

Küvibox 1 holds up to 16 x 10mm path length cells
Küvibox 2 holds up to 8 x 10mm and up to 4 x 20mm path length cells.

For cultivating plant material or for cell cultures. Rolled rim dishes with slightly tapering sides and drop-on cover. Stable, even when empty and stackable to save space. An accessory clamp can be used to fasten the lids down tightly.

For resuspending pellets and homogenising within tubes (1.5, 2.0ml, exact fit). Autoclavable. Suitable for homogeniser/motor drive.

Accessories PCR tubes strips, PP, with attached single caps, 1 ridge Accessories Micro pestles, accessory drive motor Alternative Homogenisers with PTFE or glass pestles

Mobile device for scarfing and flame-sterilising. With piezoelectric-ignition and gas supply control to create a soft or sharp flame. Infinite adjustment of the flame. Highest operational safety. In short-term use, the flame is activated as long as the push button is pressed. For continuous operation with lock key.

schuett easyflame to use with propane/butane gas
1. Suitable with gas cartridges with 7/16" connection thread, e.g. CG 1750, Express 444, AT 2000.
2. Adapters for CV 360 or CP 250 gas cartridges optional.

schuett easyflame^plus for connecting natural gas and propane / butane gas with gas safety hoses
1. Natural gas hose for central gas supply for easy plugging the device (hose barb included)
2. Propane / butane gas hose with fitting (1/4 "-left-hand thread) for the use of gas cartridge adapters or gas cylinders with pressure reducer. Matching adapters C 206 and CV 300/470 (already equipped with gas safety hose, 0.5m and reducer). Gas safety tubing in other lengths on request.

Specifications
Dimensions (W x D x H):	260 x 90 x 60mm
Weight:	approx. 350g

Accessories Adapters for gas cartridges

Potter Elvehjem & Dounce. Safe homogenisation without much effort, for gentle digestion of biological samples and tough, difficult to homogenize material, so that a high proportion of intact cell nuclei can be isolated.

• Large stability, vibration-free due to robust 3-fold stand construction
• 4-digit display for reproducible homogenisation
• Easy handling
• Steplessly adjustable, electronic speed control from 40 - 3000 min-1
• High torque drive, powerful even at low speeds
• Flexible use
• Large selection of conical and cylindrical homogenizers and pestle (PTFE, glass and also glass fibre reinforced)
• Tubes with volumes from 1.5 to 40 ml and outer diameters from 10 to 40 mm can be used
• Use of Eppendorf^® microreaction vessels with 1.5 ml possible
• Chuck with hollow shaft for quick and easy pestle change and the use of different shaft lengths and diameters
• For optimum cooling, the cooling vessel can be filled with ice or ice water

Supplied with: schuett homgen^plus homogeniser drive unit with universal keyless chuck, incl. cooling vessel, 1000 ml and universal chuck set (consisting of 6 sizes).

We also offer a sterile alternative for use in a glove box and with infectious material. Details on request.

Glass homogeniser mortar with conical or cylindrical PTFE pestles mounted on corrosion-resistant, stainless steel shafts. Inert. Resilient. With smooth, wax-like, moisture-repellent surface. Glass-fibre reinforced pestles are available for grinding particularly tough materials.
For all common homogenizer drives or for schütt homgen^plus.

Glass mortar Type 1:	With flared overflow neck and spout, conical (Fig. A)
Glass mortar Type 2:	Without flared overflow neck, cylindrical (Fig. B)
Glass mortar Type 3:	With flared overflow neck and spout, cylindrical (Fig. C)

Accessories