The blue LABSOLUTE® waste bags made from LDPE with a wall thickness of 35 µm are tear resistant, flexible and offer a wide range of applications. The red waste bags with a material thickness of 150 μm are ideal for medical practices, hospitals or laboratories to dispose hazardous waste. All LABSOLUTE® LDPE waste bags are made from 100 % recycled material.
The smaller waste bags with a volume of 30 and 60 l made from HDPE are perfect for small laboratory waste bins.

The versatile LABSOLUTE® narrow-mouth bottles made of LDPE can be combined with different closure types. In combination with the screw caps the bottles are 100 % tight and therefore perfect for storing and transporting liquids. They can be used in direct contact with food according to the EU regulations 10/2011, 1282/2011, 1183/2012 and 1935/2004.

The red LABSOLUTE® screw caps and pouring rings made of PBT are the perfect complement to all clear and amber laboratory glass bottles. Both the caps, delivered with a PTFE-coated silicone seal, as well as the pouring rings are temperature-resistant up to 200°C. Therefore it is possible to sterilize them with hot air at 180 °C. Evaporation of highly volatile substances is avoided by the additional seal.

LABSOLUTE® microscope slides made of soda-lime glass comply with DIN ISO 8037-1 and 8037-2. This means they are the ideal solution for excellent and reproducible microscopy results. The microscope slides, measuring approx. 76 x 26 mm, have a thickness of around 1 mm and are delivered pre-cleaned and ready for use. The 20 mm wide, coloured or colourless frosted area is at one end on one side.

Cut microscope slides are particularly economical and therefore represent an excellent alternative to the ground versions, for routine tasks. The corners and edges are 90° for all cut microscope slides.

The white, octagonal LABSOLUTE® stoppers are made of HDPE and comply with DIN 12254. They are the perfect complement to all laboratory glassware with a standard ground joint. The joint sizes 34/35, 45/40 and 60/46 are in addition to the standard.

LABSOLUTE® wooden spatulas are suitable for various applications in the laboratory, pharmacy or industry, e.g. for mixing emulsions.

• untreated wood
• round edges

The LABSOLUTE® narrow-mouth bottles made of HDPE with PP flap cap can be used for a variety of liquids. The bottles can be used in direct contact with food. Due to the conical shoulder the bottles are perfectly drainable.

The DIN 28 screw thread has an additonal sealing cone. The spout has a diameter of 3 mm.

LABSOLUTE® Pasteur pipettes guarantee a comfortable and safe handling of fluids. Due to the constant drop volume the transfer pipettes are perfectly suited to aliquot larger volumes of liquids. The soft suction ball and precisely finished tip guarantee pleasant, clean working.

• Made from transparent LDPE
• Suitable for food analyses
• Free of BSE

The powder-free, natural-coloured LABSOLUTE® disposable latex gloves made of natural rubber with a rolled cuff offer excellent elasticity and wearing comfort. The gloves with textured fingers can be used in a wide variety of areas such as in pharmaceutical and chemical laboratories or the food industry.

The LABSOLUTE® latex gloves with an AQL value of 1.5 comply with the following standards and directives

• EN 420, EN ISO 374-1, -2, -4, -5 and EN 16523-1
• (EU) 2016/425 (PPE in accordance with CE category III for complex risks)
• 1935/2004 (can be used in direct contact with food)
• ASTM 1671 / ISO 16604 (viral penetration)

• Delivered in handy dispenser boxes of 100 (S, M, L) or 90 pieces (XL)
• Free from phthalates and softeners
• Storage life: 3 years
• Length: approx. 240 mm
• Thickness (double): finger min. 0.24 mm, palm min. 0.20 mm, cuff min. 0.12 mm
• Easy to put on and off
• Skin-friendly
• Can be worn on the left or right hand

The LABSOLUTE® pouring rings made of PP are the perfect complement to all clear and amber laboratory glass bottles with GL32 or GL45 thread. Autoclavable at 121 °C.

Short thread vials and micro-vials ND9 are available in clear and amber first hydrolytic class glass and can be used on almost all autosamplers. You can replace other 1.5 ml vial types like 11 mm crimp neck vials, 8-425 and 10-425 screw neck vials, which can help rationalize stocks.

The wide opening requires matching micro-inserts with 6 mm diameter.

Due to the technical geometry, the vails can be used on all common autosamplers, but preferentially on instruments made by Agilent, HTA, Shimadzu, Thermo Scientific, Varian and Waters.

The hexagonal LABSOLUTE® hollow glass stoppers with standard ground joint and pointed bottom are made of high-quality borosilicate glass 3.3 and are therefore extremely temperature-resistant up to 500 °C. The stoppers comply with DIN 12252 form C. They are resistant to cold lyes/alkaline solutions and strong acids with the exception of hydrofluoric acid and concentrated, hot phosphoric acid. The stoppers can be easily combined with all glass products that have a ground joint such as measuring flasks, Erlenmeyer flasks or round bottom flasks.

The LABSOLUTE® all purpose cloths can absorb large quantities of liquid quickly and are suitable for universal use.

• 80 % viscose, 20 % PP
• 110 g / m²
• 380 x 380 mm

The powder-free, blue LABSOLUTE® disposable gloves Protective made of nitrile with a rolled cuff are the best supplement to the LABSOLUTE® Sensitive gloves for a higher protection level.

The silicone-free gloves with an AQL value of 1.5 are textured on the outside and comply with the following standards and directives

• EN 420, EN 421, EN ISO 374-1, -2, -4, -5 and EN 16523-1
• (EU) 2016/425 (PPE in accordance with CE category III for complex risks)
• 1935/2004 (can be used in direct contact with food)
• ASTM 1671 / ISO 16604 (viral penetration)

• Approved for the use within Hazard Analysis and Critical Control Points (HACCP) concepts
• UV transmission less than 0.1 % at 360 nm
• Delivered in handy dispenser boxes of 100 (S, M, L) or 90 pieces (XL)
• Free from phthalates, softeners and allergenic latex proteins
• Storage life: 3 years
• Length: approx. 240 mm
• Thickness (double): finger min. 0.30 mm, palm min. 0.22 mm, cuff min. 0.20 mm
• Can be worn on the left or right hand

Short thread screw seals ND9 are made of PP and are supplied with fitted septa made of a variety of materials. They have a 6 mm centre hole and are available in different colours. The screw caps are similar in shape to the crimp caps and are therefore also suitable for robotic handling.

These septa are temperature-resistant from -60 °C to 200 °C and have better purity than septa made of natural rubber, butyl or red rubber. However, they have less effective resealability properties and are therefore more suitable for single-injection applications. Septa with a double-sided PTFE coating show a very low particle formation during penetration.

The powder-free, lavender blue LABSOLUTE® disposable gloves Sensitive made of nitrile are flat with a rolled cuff and offer excellent elasticity and wearing comfort. A special after-treatment makes these LABSOLUTE® disposable gloves skin friendly and easy to put on. The gloves have textured finger tips.

The LABSOLUTE® nitrile gloves with an AQL value of 1.5 comply with the following standards and directives

- EN 420, EN ISO 374-1, -2, -4, -5 and EN 16523-1

• (EU) 2016/425 (PPE in accordance with CE category III for complex risks)
• 1935/2004 (can be used in direct contact with food)
• ASTM 1671 / ISO 16604 (viral penetration)

• Approved for the use within Hazard Analysis and Critical Control Points (HACCP) concepts
• Resistance against ethidium bromide (1 %) for more than 480 min (level 6)
• Delivered in handy dispenser boxes of 200 (XS, S, M, L) or 180 pieces (XL)
• Free from phthalates, softeners and allergenic latex proteins
• Storage life: 3 years
• Length: approx. 240 mm
• Thickness (double): finger min. 0.14 mm, palm min. 0.12 mm, cuff min. 0.10 mm
• Can be worn on the left or right hand

The LABSOLUTE® disposable sleeve guards are approximately 40 cm long, free of latex and made of strong PE film.

The LABSOLUTE® petri dishes are made of soda-lime glass and supplied in two parts. The inner diameter and the height refer to the bottom plate, the outer diameter refers to the upper plate. They are autoclavable at 121 °C.

The LABSOLUTE® dropping caps made of LDPE are perfectly adapted for the narrow-mouth bottles 7.696 161 to 7.696 165. The fine, long drip tip enables precise work. The red protection cap preserves the tip and the liquid inside the bottle.

The LABSOLUTE® screw caps with integrated lip seal made of PP are the perfect complement for all clear and amber laboratory glass bottles with GL32 or GL45 thread. There is no additional seal required. Autoclavable at 121 °C.

Screw neck vials ND13 with 13-425 thread made of clear and amber first hydrolytic class glass facilitate easy filling with viscous substances thanks to their wide opening.

The LABSOLUTE® vials for optimised micro-sampling are the best solution for very small sample volumes.

The powder-free LABSOLUTE® disposable gloves nitrile GREEN are flat with a rolled cuff and offer excellent elasticity and wearing comfort. The gloves have textured finger tips.

They are extremly skin-friendly, because they are free from chlorine and natural rubber proteins. The gloves use less water, energy and carbon dioxide during the production process as similar disposable gloves making these gloves a more sustainable option.

The LABSOLUTE® nitrile gloves with an AQL value of 1.5 comply with the following standards and directives

- EN 420, EN ISO 374-1, -2, -4, -5 and EN 16523-1

• (EU) 2016/425 (PPE in accordance with CE category III for complex risks)
• 1935/2004 (can be used in direct contact with food)
• ASTM 1671 / ISO 16604 (viral penetration)

• Resistance against ethidium bromide (1 %) for more than 480 min (level 6)
• Delivered in handy dispenser boxes of 200 (S, M, L) or 180 pieces (XL)
• Free from phthalates, softeners and allergenic latex proteins
• Free from rubber accelerators
• Storage life: 3 years
• Length: approx. 240 mm
• Thickness (double): finger min. 0.14 mm, palm min. 0.12 mm, cuff min. 0.10 mm
• Easy to don thanks to a synthetic inner coating
• Can be worn on the left or right hand

Crimp neck vials and micro-vials ND11 made of clear and amber first hydrolytic class glass are used as standard in GC and HPLC. A large selection of micro-inserts is available for these vials.

The sporty safety spectacles from LABSOLUTE® comply with EN 166 and EN 170. They match even the strictest regulations in terms of occupational protection and safety. The lenses of all spectacle models are made of high-quality polycarbonate UV 2 - 1,2. Special coating of the crystal-clear lens guarantees a scratch-proof and permanent non-fogging viewing surface. Innovative technologies and ultra-modern materials also ensure an excellent fit, distortion-free vision and 100 % UV protection - for, quite simply, comfort of the highest order.

Ideal for spectacle wearers: LABSOLUTE® vision. These lightweight over spectacles are also impressive due to their reliable protection, unrestricted lateral view and user-friendly wearing comfort.

Lightweight over-spectacles for your safety

• Unrestricted lateral view
• Excellent comfort and secure grip thanks to soft plastic on the arm ends

The LABSOLUTE® absorbent paper strips are made of qualitative filter paper. They are suited to absorb excess fluids such as staining solutions for microscope specimens.