The powder-free, blue LABSOLUTE® disposable gloves Protective made of nitrile with a rolled cuff are the best supplement to the LABSOLUTE® Sensitive gloves for a higher protection level.

The silicone-free gloves with an AQL value of 1.5 are textured on the outside and comply with the following standards and directives

• EN 420, EN 421, EN ISO 374-1, -2, -4, -5 and EN 16523-1
• (EU) 2016/425 (PPE in accordance with CE category III for complex risks)
• 1935/2004 (can be used in direct contact with food)
• ASTM 1671 / ISO 16604 (viral penetration)

Further properties:

• Approved for the use within Hazard Analysis and Critical Control Points (HACCP) concepts
• UV transmission less than 0.1 % at 360 nm
• Delivered in handy dispenser boxes of 100 (S, M, L) or 90 pieces (XL)
• Free from phthalates, softeners and allergenic latex proteins
• Storage life: 3 years
• Length: approx. 240 mm
• Thickness (double): finger min. 0.30 mm, palm min. 0.22 mm, cuff min. 0.20 mm
• Can be worn on the left or right hand

Accessories Holder for glove boxes, stainless steel Alternative Disposable gloves, latex, powder-free Alternative Disposable gloves, nitrile Sensitive, powder-free

LABSOLUTE® Pasteur pipettes guarantee a comfortable and safe handling of fluids. Due to the constant drop volume the transfer pipettes are perfectly suited to aliquot larger volumes of liquids. The soft suction ball and precisely finished tip guarantee pleasant, clean working.

• Made from transparent LDPE
• Suitable for food analyses
• Free of BSE

Alternative Pasteur pipettes, soda-lime glass

All LABSOLUTE® clear and amber volumetric flasks with accuracy class A comply with the DIN EN ISO 1042 standard. They are made of high-quality borosilicate glass 3.3 and calibrated to "In" (20 °C). All volumetric flasks are supplied with suitable stoppers made of glass or PE. A batch-specific certificate of conformity can be supplied on request.

Accessories Stoppers, HDPE Accessories Hollow glass stoppers, type C, borosilicate glass 3.3 Alternative Volumetric flasks, class A, with hollow glass stopper, blue graduation Alternative Volumetric flasks, amber, class A, with PE stopper, white graduation Alternative Volumetric flasks, trapezoidal, class A, with PE stopper, blue graduation

The safe seal micro tubes from LABSOLUTE® have a special locking mechanism preventing unintentional opening of the lid during applications with thermal stress.

• Frosted cover and labelling field
• Graduation for easy volume determination
• Non-sterile
• Can be centrifuged up to 18000 x g (0.5 ml and 2.0 ml) and 30000 x g (1.5 ml)
• Autoclavable

Accessories Racks for micro tubes, 80 wells, PP Accessories Floating racks, 16 or 20 wells, PP Accessories Universal racks for different tube sizes, PP Accessories Rack for micro tubes, 20 wells, PP Alternative Micro tubes, PP

LABSOLUTE® offers a complete assortment for your pipetting tasks - no matter whether packed in bags, within racks or as an efficient refill system: all pipette tips are part of a system in which the components can be exchanged. The pipette tips are made of pure PP and comply with EN ISO 8655. In combination with the LABSOLUTE® pipettes, they constitute the perfect pipetting unit. Thanks to their universal fit and the high-quality material, the tips guarantee a firm and absolutely tight hold on various pipette models. And all this with much less attachment and ejection forces. The fully automated production and packaging of the pipette tips under clean room conditions guarantee completely contamination-free working conditions with products which are certified free of DNase, RNase, human DNA and pyrogens - to ensure reproducible and consistent results.

• High quality standard
• Graduated tips: the volume is visible at first glance
• 200 and 1000 µl tips are available in yellow or blue, respectively
• Autoclavable

Our pipette tips boxes for comfortable and efficient pipetting:

• Simple-to-use closure for single-handed opening
• The transparent design provides a complete overview of the tips
• Coloured trays enable fast recognition of the volume
• Refill system: easy and fast removal and replacement of the trays
• Stackable boxes for space-saving and safe storage
• Autoclavable at 121 °C

The 0.1-10 XL / 20 µl tips (7.695 841) are compatible with 20 µl Eppendorf Reference®, Eppendorf Research® Plus and Brand Transferpette®.
Bevelled tips (7.695 842 and 7.695 843): due to the bevelled end the contact surface of the pipetted liquid is reduced and less residual liquid remains at the tip.
Item 7.695 856 is delivered in a useful folded box.

Accessories Pipette tips boxes Accessories Single-channel pipettes Accessories Single-channel pipette starter sets Accessories Eight-channel pipettes Accessories Twelve-channel pipettes Accessories Racks for 5 ml and 10 ml pipette tips Accessories Pipette stand with dual bins for pipette tips, acrylic Alternative Pipette tips without aerosol barrier in racks, non-sterile Alternative Pipette tips without aerosol barrier in racks, sterile

LABSOLUTE® measuring and griffin beakers are made of chemical-resistant, transparent PP and are therefore particularly lightweight. They feature a clearly legible printed scale and a functional spout and are approved for food use and autoclavable up to 121 °C. Production is compliant with ISO 7056.

• Smooth surface for quick and easy cleaning
• Excellent resistance to strong, concentrated acids and alkaline solutions/lyes as well as aliphatic alcohols
• Good resistance to ketones, aldehydes and aliphatic and aromatic hydrocarbons

Alternative Measuring beakers with open handle, PP Alternative Griffin beakers (Measuring beakers without handle), PP

Short thread screw seals ND9 are made of PP and are supplied with fitted septa made of a variety of materials. They have a 6 mm centre hole and are available in different colours. The screw caps are similar in shape to the crimp caps and are therefore also suitable for robotic handling.

These septa are temperature-resistant from -60 °C to 200 °C and have better purity than septa made of natural rubber, butyl or red rubber. However, they have less effective resealability properties and are therefore more suitable for single-injection applications. Septa with a double-sided PTFE coating show a very low particle formation during penetration.

Accessories Short thread vials and micro-vials ND9, wide opening Accessories Short thread vials and micro-vials ND9, SureStop Accessories Short thread vials and micro-vials ND9, PMP or PP Alternative With natural rubber / TEF septa Alternative With RedRubber / PTFE septa Alternative With pure PTFE septa Alternative With silicone / PTFE septa, Ultrabond Alternative With silicone / PTFE septa, magnetic Alternative MS short thread screw seal ND9

The LABSOLUTE® petri dishes are made of crystal-clear PS and offer high optical clarity. The dishes with three vents support gas exchange and are ideal for short incubation times. Dishes without vents are best suited for anaerobic and long-term work. The Petri dishes are prepared and packed under aseptic conditions. Sterilisation for the sterile dishes is done by beta rays.

• Perfectly stackable
• Heat-resistant from -40 - 70 °C

Packed in sub-units of 10 plates (Ø = 60 and 150 mm), 15 plates (Ø = 55 mm) or 20 plates (Ø = 90 mm).

Accessories Rack for Petri dishes, acrylic Accessories Disposable spatulas, L- and T-shaped, PS Accessories Disposable inoculation loops, sterile Alternative Petri dishes, soda-lime glass

Short thread vials and micro-vials ND9 are available in clear and amber first hydrolytic class glass and can be used on almost all autosamplers. You can replace other 1.5 ml vial types like 11 mm crimp neck vials, 8-425 and 10-425 screw neck vials, which can help rationalize stocks.

The wide opening requires matching micro-inserts with 6 mm diameter.

Due to the technical geometry, the vails can be used on all common autosamplers, but preferentially on instruments made by Agilent, HTA, Shimadzu, Thermo Scientific, Varian and Waters.

Accessories Micro-inserts for vials with wide opening, glass Accessories Vial racks, acrylic Accessories Vial racks, PP Accessories ND8, ND9, ND10, ND11 - 81 positions Accessories With natural rubber / TEF septa Accessories With RedRubber / PTFE septa Accessories With pure PTFE septa Accessories With silicone / PTFE septa Accessories With silicone / PTFE septa, Ultrabond Accessories With silicone / PTFE septa, magnetic Accessories MS short thread screw seal ND9 Alternative Short thread vials and micro-vials ND9, SureStop Alternative Short thread vials and micro-vials ND9, PMP or PP Alternative Screw neck vials and micro-vials ND8, small opening Alternative Screw neck vials and micro-vials ND10, wide opening Alternative Crimp neck vials and micro-vials ND11, wide opening Alternative Snap ring vials and micro-vials ND11, wide opening Alternative Vase vials Alternative Vials with directly closable micro-insert

LABSOLUTE® test tubes made of soda-lime glass are rimless with a wall thickness of 0.7 - 0.9 mm. Compared to the borosilicate tubes they are less resistant against temperature changes and aggressive chemicals.

Accessories Winged caps for test tubes, PE Accessories Racks for 15 ml centrifuge tubes, PA Accessories Universal racks for different tube sizes, PP Alternative Test tubes, beaded rim, borosilicate glass 4.9 Alternative Disposable test tubes, plastic

The LABSOLUTE® micro tubes are made of high-quality PP and are resistant to mechanical and chemical stress. Simple and safe opening and closing of the vessel allow safe handling for greater comfort.

• Free of DNase, RNase and pyrogens
• Non-sterile
• Guaranteed metal-free
• Precise graduations lines on 1.5 and 2.0 ml reaction vessels
• Puncturable cap
• Matted cap with labelling field
• Can be centrifuged up to 25000 x g (1.5 and 2.0 ml) and 20000 x g (0.5 ml)
• Autoclavable at 121 °C

Accessories Racks for micro tubes, 80 wells, PP Accessories Floating racks, 16 or 20 wells, PP Accessories Universal racks for different tube sizes, PP Accessories Rack for micro tubes, 20 wells, PP Alternative Safe seal micro tubes, PP Alternative Micro tube with flip cap, PP

CHEMSOLUTE® Universal pH-indicator paper is a cost-effective alternative for the rapid determination of the pH value and consists of high-quality filter papers impregnated with indicator solution.

• pH value determination in 1.0 pH steps
• With colour scale
• Roll (L x W): 5 m x 7 mm

Alternative pH indicator strips

The LABSOLUTE® disposable cuvettes for the VIS and UV range feature optimised photometric properties and high transparence thanks to modern manufacturing methods. Furthermore, you benefit from the fact that all cuvettes within one packing unit are sorted according to their numbered cavities of origin. Consequently, you receive technically identical cuvettes which prevent deviations in extinction coefficient values. Supplied in practical, reclosable styrofoam racks.

• Increased heat transfer thanks to optimized form and small wall thickness
• Recessed measuring fields: reduce risk of scratching by the cuvette holder
• Arrow marker points to transmission direction
• Path length: 10 mm
• Outer dimensions (W x H x D): 12.5 x 45 x 12.5 mm

Alternative Disposable cuvettes for the UV range

The practical LABSOLUTE® wide-mouth bottles made of LDPE, HDPE or PP are particularly easy to fill and clean due to their wide opening. With 100 % tightly closing screw lids made of PP, they are ideal for shipping and storing liquid, powdery and paste-like samples.

Lids are seperate.

Alternative Wide-mouth bottles, natural, HDPE

LABSOLUTE® offers a complete assortment for your pipetting tasks - no matter whether packed in bags, within racks or as an efficient refill system: all pipette tips are part of a system in which the components can be exchanged. The pipette tips are made of pure PP and comply with EN ISO 8655. In combination with the LABSOLUTE® pipettes, they constitute the perfect pipetting unit. Thanks to their universal fit and the high-quality material, the tips guarantee a firm and absolutely tight hold on various pipette models. And all this with much less attachment and ejection forces. The fully automated production and packaging of the pipette tips under clean room conditions guarantee completely contamination-free working conditions with products which are certified free of DNase, RNase, human DNA and pyrogens - to ensure reproducible and consistent results.

• High quality standard
• Graduated tips: the volume is visible at first glance
• 200 and 1000 µl tips are available in yellow or blue, respectively
• Autoclavable

Our pipette tips boxes for comfortable and efficient pipetting:

• Simple-to-use closure for single-handed opening
• The transparent design provides a complete overview of the tips
• Coloured trays enable fast recognition of the volume
• Refill system: easy and fast removal and replacement of the trays
• Stackable boxes for space-saving and safe storage
• Autoclavable at 121 °C

LABSOLUTE® filter tips offer dual protection! The fine-pored filter made of PE serves as a defence to protect the samples from aerosols and biomolecules. At the same time, the hydrophobic material prevents the pipette from contamination. Delivered in stackable and stable racks.

0.1-10 XL/20 µl tips (7.695 881) are compatible with 20 µl Eppendorf Reference®, Eppendorf Research® Plus and Brand Transferpette®.

Accessories Single-channel pipettes Accessories Single-channel pipette starter sets Accessories Eight-channel pipettes Accessories Twelve-channel pipettes Alternative Pipette tips without aerosol barrier in racks, sterile Alternative Pipette tips without aerosol barrier in racks, non-sterile

The CHEMSOLUTE® pH indicator strips enable fast and accurate pH value determination. The range offers suitable products for a wide variety of pH value intervals.

• High accuracy and easy legibility
• Stable carrier strips with coloured test fields
• Non-bleeding, no contamination of the medium
• 100 strips per pack

The versatile LABSOLUTE® narrow-mouth bottles made of LDPE, HDPE or PP with their screw lids made of PP are 100 % tight and therefore perfect, especially for storing and transporting liquids.

Autoclavable at 121 °C.

Alternative Narrow-mouth bottles, natural, LDPE Alternative Narrow-mouth bottles, natural, HDPE Alternative Narrow-mouth bottles, amber, HDPE Alternative Wide-mouth bottles, natural, PP

The calibration vessel, integrated into the CHEMSOLUTE® twin neck dispensing bottles, allows the particularly economical dispensing of solution and prevents contamination.

- Accuracy ±0.01 pH units, reference temperature 20 °C

• Traceable to the National Institute of Standards and Technology (NIST)
• The dyed buffer solutions allow easy identification

Short thread screw seals ND9 are made of PP and are supplied with fitted septa made of a variety of materials. They have a 6 mm centre hole and are available in different colours. The screw caps are similar in shape to the crimp caps and are therefore also suitable for robotic handling.

These septa are temperature-resistant from -40 °C to 110 °C. They are easier to penetrate and have lower particle formation than septa made of natural rubber.

Accessories Short thread vials and micro-vials ND9, wide opening Accessories Short thread vials and micro-vials ND9, SureStop Accessories Short thread vials and micro-vials ND9, PMP or PP Alternative With natural rubber / TEF septa Alternative With pure PTFE septa Alternative With silicone / PTFE septa Alternative With silicone / PTFE septa, Ultrabond Alternative With silicone / PTFE septa, magnetic Alternative MS short thread screw seal ND9

LABSOLUTE® offers a comprehensive range in the field of PCR consumables. These include tubes, strips of 8 tubes, 96-well plates and sealing films. In addition to the standard profile variants with 0.2 ml working volume, we also offer some low-profile versions with a working volume of 0.1 ml in the case of strips and plates.

• Suitable for all common thermal cyclers
• Optimal heat transfer and short cycle times through very thin and uniform wall thickness

Self-adhesive foils for safe sealing of 96-well PCR plates from LABSOLUTE® are free from human DNA and RNA, nucleases and pyrogens.

PCR adhesive foil: Polyester film with an acrylic-based adhesive, which is suitable for PCR, qPCR and other colorimetric assays, but has a low autofluorescence.

Cover and storage foil: PP foil with acrylic-based adhesive for universal closing of 96-well plates. Reliably protects the samples against evaporation and dust; removable, non-pierceable.

PCR and storage foil: The 20 µm thick aluminium foil with acrylic-based adhesive is easily pierceable without sticking the pipette tips or creating a vacuum.

qPCR adhesive foil: This qPCR foil is specially developed for qPCR applications. The pressure-sensitive adhesive is only released when the film comes into contact with the raised rims of the individual wells, thereby ensuring reliable sealing with high transparency and minimal autofluorescence.

Accessories PCR 96-well plates, PP

These high-quality CHEMSOLUTE® electrolyte solutions are perfectly suited to the secure and reliable maintenance and care of electrodes.

• Ideal for topping up and replacing reference electrolyte solution in pH electrodes
• Suitable for long-term wet storage of the electrodes
• Traceable to SRM from the National Institute of Standards and Technology (NIST)

The stackable vial racks made of transparent acrylic or blue PP allow the easy handling and secure transport of sample vials.

Transparent acrylic allows the fill level of the sample vials to be easily checked. PP is not transparent, but more robust than acrylic.

Alternative Vial racks, acrylic

The LABSOLUTE® spot plates are made of high-quality porcelain. The surface is completely glazed. Compared to the reaction plates made from plastics, the porcelain spot plates are much more resistant against influences of temperature and chemicals. Finally the spot plates are easy to clean and autoclavable.

The LABSOLUTE® graduated and volumetric pipettes are made of soda-lime glass and have a batch identification. A batch-specific certificate of conformity is available on request.

Calibration
The graduated and volumetric pipettes are calibrated to "Ex" (+5 seconds) so that the draining volume of liquid corresponds to the printed volume specification after five seconds.

Accuracy class AS
All LABSOLUTE® graduated and volumetric pipettes satisfy the criteria of the highest accuracy class A. The tolerance lies within the standard defined for class A. The suffix "S" means rapid draining. The draining time is between 5 and 20 seconds, depending on the nominal volume, as opposed to 10 to 60 seconds with class A.

Durable labelling
All information is imprinted in brown diffusion dye. This dye is burned into the surface of the glass and can only be destroyed by glass erosion. The labelling is therefore unaffected by chemicals and cleaning agents.

According to DIN EN ISO 835.

Accessories Pipette stand, vertical, 94 positions, PP Accessories Safety pipette fillers, natural rubber Accessories Pipette controller

LABSOLUTE® beakers with durable volume scale and spout are made of high-quality borosilicate glass 3.3 and are therefore extremely temperature-resistant up to 500 °C. The beakers in low and high form comply with DIN 12331 and ISO 3819. They are resistant to cold lyes/alkaline solutions and strong acids, with the exception of hydrofluoric acid and hot, concentrated phosphoric acid.

Alternative Beakers, low form, borosilicate glass 3.3

The transparent LABSOLUTE® multi-purpose beakers are made of PP and suitable for the storage of solids and fluids. Delivery including screw caps made of HDPE.

• Can be used in direct contact with food
• Autoclavable at 121 °C (without lid)
• 120 ml / 60 ml: with graduation and labelling field (last graduation mark: 100 ml / 50 ml)
• 200 ml: without graduation and labelling field

Alternative Sample containers, PP Alternative Sample beakers, non sterile, bulk packaging Alternative Sample beakers, sterile, individually packed Alternative Sample beaker graduated, PP

The ready-to-use CHEMSOLUTE® conductivity solutions are suitable for calibrations.

• Values stated at 25 °C, accuracy ±1 %
• Traceable to the National Institute of Standards and Technology (NIST)
• Tested by an ISO 17025 accredited laboratory

LABSOLUTE® laboratory bottles are made of high-quality borosilicate glass 3.3 and are therefore extremely temperature-resistant up to 500 °C. They comply with EN ISO standard 4796-1. The bottles have a retrace code, a durable volume scale as well as a GL45 thread (GL32 thread for 50 ml bottles). The bottles as well as the closures are resistant against a wide range of chemicals.

With blue pouring rings and screw caps made of PP with integrated lip seal. Autoclavable at 121 °C.

Accessories Screw caps, PP Accessories Pouring rings, PP Accessories Pouring rings and screw caps, PBT Alternative Laboratory bottles, clear, with PBT screw caps Alternative Laboratory bottles, amber, with PP screw caps

The two-part, non-sterile LABSOLUTE® disposable syringes, with Luer lock connection complying with DIN EN 1707 or Luer slip connection complying with DIN EN 20594-1, are fully manufactured from robust, chemical resistant PP. They are free of latex, plasticizers and PVC. There are no rubber plunger seals or silicone lubricants that can cause contamination of the samples. The syringes are also impressive due to the safe functional back-stop feature and an easy-to-read permanent graduation.

Accessories  Alternative Disposable syringes, Luer lock, non-sterile, PP

The cylindrical LABSOLUTE® magnetic stirring bars have a smooth surface. The PTFE coating makes them particularly resistant to chemicals and temperatures.

Accessories Stirring bar retrievers, PTFE Alternative Set of magnetic stirring bars, cylindrical, 10 pieces, PTFE

The transparent LABSOLUTE® multi-purpose beakers are made of PP and suitable for the storage of solids and fluids. Delivery including screw caps made of HDPE.

• Can be used in direct contact with food
• Autoclavable at 121 °C (without lid)
• 120 ml / 60 ml: with graduation and labelling field (last graduation mark: 100 ml / 50 ml)
• 200 ml: without graduation and labelling field

Alternative Sample containers, PP Alternative Sample beaker graduated, PP Alternative Sample beakers, sterile, bulk packaging Alternative Sample beakers, non sterile, bulk packaging

The LABSOLUTE® crucibles made of high-quality laboratory porcelain are glazed on the inside and comply with DIN 12904. Due to their temperature resistance up to 1000 °C and the excellent resistance against alkaline solutions and acids with the exception of hydrofluoric acid, they are suitable for ashing a wide variety of samples.

Accessories Lids for crucibles, porcelain Alternative Crucibles, low form, porcelain Alternative Crucibles, high form, porcelain

The LABSOLUTE® weighing boats made of PS feature smooth surfaces to transfer each kind of sample easily with minimal sample loss. The material is antistatic, biologically inert and resistant to both weak and diluted acids, lyes and alcohols and to temperatures from -10 °C up to 70 °C. All dishes are food-grade compliant and can be used with microwave moisture analyzers.

The antistatic dishes feature a flat bottom for a secure stand. The round corners simplify the transfer of each kind of sample.

Alternative Weighing boats, diamond-shaped, PS Alternative Sample dishes with handle, aluminium Alternative Weighing paper

The LABSOLUTE® baffled flasks are made of high-quality borosilicate glass 3.3 and are therefore especially temperature and chemical resistant. The four baffles on the bottom cause a turbulent flow increasing the gas exchange surface and producing a higher oxygen transfer. The autoclavable flasks can be used with all common laboratory shakers.

Erlenmeyer shape.

Alternative Baffled flasks, GL45 screw neck, borosilicate glass 3.3

The LABSOLUTE® stirring bar retrievers in the lengths of 150, 250 and 350 mm are suitable for removing magnetic stirring bars from vessels of all kinds. They have a strong permanent magnet (Alnico 5) with a 10 mm diameter. Due to the PTFE coating the stirring bar retrievers are particularly resistant to chemicals and temperatures.

Accessories Magnetic stirring bars, cylindrical, PTFE Accessories Set of magnetic stirring bars, cylindrical, 10 pieces, PTFE

The calibration vessel, integrated into the CHEMSOLUTE® twin neck dispensing bottles, allows the particularly economical dispensing of solution and prevents contamination.

- Accuracy ±0.010 pH units, reference temperature 25 °C

• Traceable to the National Institute of Standards and Technology (NIST)
• Comply with DIN 19266

LABSOLUTE® offers a comprehensive range in the field of PCR consumables. These include tubes, strips of 8 tubes, 96-well plates and sealing films. In addition to the standard profile variants with 0.2 ml working volume, we also offer some low-profile versions with a working volume of 0.1 ml in the case of strips and plates.

• Suitable for all common thermal cyclers
• Optimal heat transfer and short cycle times through very thin and uniform wall thickness

The LABSOLUTE® strips of 4/8 PCR tubes offer optimum heat transfer between the thermal cycler and the reaction mix through their extra thin and uniform vessel walls.

• Secure sealing reduces evaporation
• Available with flat and domed caps
• High quality PP
• Free from DNase, RNase and human DNA
• Standard profile with 0.2 ml working volume
• Low profile with 0.1 ml working volume
• Autoclavable at 121 °C

Accessories Racks for PCR tubes, 96 wells, PP Accessories PCR cap strips, PP Alternative PCR tubes 0.2 ml, PP Alternative PCR 96-well plates, PP

LABSOLUTE® offers a comprehensive range in the field of PCR consumables. These include tubes, strips of 8 tubes, 96-well plates and sealing films. In addition to the standard profile variants with 0.2 ml working volume, we also offer some low-profile versions with a working volume of 0.1 ml in the case of strips and plates.

• Suitable for all common thermal cyclers
• Optimal heat transfer and short cycle times through very thin and uniform wall thickness

The LABSOLUTE® cap strips are made of virgin PP and optimally seal strips of 8 tubes and 96-well plates. For easy orientation, the ends are marked differently. The strips with flat caps are suitable for fluorescence measurements (e.g. qPCR).

Accessories Strips of 4/8 PCR tubes, PP

The LABSOLUTE® disposable cuvettes for the VIS and UV range feature optimised photometric properties and high transparence thanks to modern manufacturing methods. Furthermore, you benefit from the fact that all cuvettes within one packing unit are sorted according to their numbered cavities of origin. Consequently, you receive technically identical cuvettes which prevent deviations in extinction coefficient values. Supplied in practical, reclosable styrofoam racks.

• Increased heat transfer thanks to optimized form and small wall thickness
• Recessed measuring fields: reduce risk of scratching by the cuvette holder
• Arrow marker points to transmission direction
• Path length: 10 mm
• Outer dimensions (W x H x D): 12.5 x 45 x 12.5 mm

Alternative Disposable cuvettes for the VIS range

The smooth surface of the weighing papers guarantees a good sample recovery.

• Dimensions (W x D): 95 x 110 mm
• Weight: 45 g/m²

Alternative Weighing boats, square, PS Alternative Weighing boats, diamond-shaped, PS Alternative Sample dishes with handle, aluminium

The LABSOLUTE® push-in plugs guarantee high tightness thanks to the two sealing lamellas.

Accessories Disposable test tubes, plastic Accessories Test tubes, rimless, soda-lime glass

The LABSOLUTE® bottle top dispenser series is impressive with its high quality and unlimited reliability in combination with a high degree of safety and user-friendliness. Exceptionally high-quality materials guarantee a long service life and superlative chemical resistance.

No compromises on quality or reliability
All wetted parts of the LABSOLUTE^® bottle top dispensers are made of PTFE, fluorinated ethylene propylene and borosilicate glass. The constant ejection volume and completely bubble-free dispensing make them the number one choice in terms of precision and reproducibility. Each of the LABSOLUTE^® dispensers comes with an individual certificate, since all devices are calibrated complying with DIN ISO 8655.

Extra security when handling liquids and maximum handling comfort

• Protection of the borosilicate dispensing cylinder with PP material
• Safety closure valve prevents uncontrolled dripping, air contact or drying out
• Free-running mechanism thanks to specially constructed PTFE piston with silicon O-ring
• Telescopic suction tube to different bottle heights
• Rapid and easily visible volume adjustment with handy adjustment screw
• Autoclavable at 121 °C

Adapters with 28, 30, 38, 40 or 45 mm thread for securing the dispensers to bottles are included in the supplied package.

The dispenser with recirculation valve allows a uniform, precise and reliable bubble-free dosing without reagent loss. The specially designed bottle adapter allows a 360° rotation of the dispenser on the mounted bottle.

Accessories Accessories for bottle top dispensers

The practical, autoclavable LABSOLUTE® racks made of PP offer space for four different sizes of tubes: 4 x 50 ml (Ø well 30 mm) and 12 x 15 ml (Ø well 17.5 mm) conical centrifuge tubes, 32 x 1.5/2.0 ml (Ø well 11.6 mm) and 32 x 0.5 ml (Ø well 8.2 mm) tubes. The racks feature side links so that single racks can be united to one big entity.

• Available in different colours
• Dimensions (W x H x D): 174 x 95 x 52 mm

Accessories Micro tubes, PP Accessories Safe seal micro tubes, PP Accessories Micro tube with flip cap, PP Accessories Centrifuge tubes, PP Accessories Centrifuge tubes, amber, PP Accessories Micro tubes 5 ml, PP Alternative Racks for 15 ml centrifuge tubes, PA Alternative Racks for 50 ml centrifuge tubes, PA Alternative Racks for micro tubes, 80 wells, PP

The LABSOLUTE® disposable inoculation loops have a flexible loop at one end to inoculate soft agar culture media and a needle for picking individual colonies at the other end. The disposable inoculation loops are packed sterile in a paper/plastic blister of 20 pieces.

• Length: 195 mm

Accessories Petri dishes, PS Accessories Petri dishes, soda-lime glass

LABSOLUTE® offers a comprehensive range of syringe filters that have been developed especially for the efficient filtration of aqueous and organic solutions and for ventilation. The choice of different housing diameters, membrane types and pore sizes offers the ideal solution for your applications. Intensive quality checks ensure consistently high quality, both of the membrane material and the filter unit as a whole, for all of the filters we supply.

• Made without the use of adhesives: the housing and membrane are welded
• Sterile versions: 100 % sterility thanks to gamma radiation
• Equipped with Luer connections
• The filters are printed, both with the membrane type and the pore size, excluding the possibility of confusion

SETUP

The syringe filters have either acrylic or PP housing. Both housing versions have Luer connections, and the membrane is secured in the housing so that the sample fluid cannot flow around the membrane.

LABSOLUTE® syringe filters with a filter membrane diameter of 25 mm are ideal for the preparation of samples with a volume from 1.5 ml to 100 ml. The effective filtration area is 4.6 cm². This, in combination with the stable housing pressure resistant to 5 bar made from polypropylene (transparent) or acrylic (pore size 0.22 µm blue or pore size 0.45 µm yellow), ensures rapid filtration. The non-sterile filters are packed in quantities of 500 in polypropylene pouches, while sterile filters are packaged individually in blisters in quantities of 50 per box.

Properties:

• Housing diameter 33 mm
• Membrane diameter 25 mm (surface 4.6 cm²)
• Low content of extractable substances
• Low dead volume

Accessories Disposable syringes, Luer slip, non-sterile, PP Accessories Disposable syringes, Luer lock, non-sterile, PP Alternative Syringe filters 13 mm Alternative Syringe filters, ProFill, 17 mm Alternative Syringe filters, ProFill, 25 mm Alternative Syringe filters, ProFill, 30 mm

The two-part, non-sterile LABSOLUTE® disposable syringes, with Luer lock connection complying with DIN EN 1707 or Luer slip connection complying with DIN EN 20594-1, are fully manufactured from robust, chemical resistant PP. They are free of latex, plasticizers and PVC. There are no rubber plunger seals or silicone lubricants that can cause contamination of the samples. The syringes are also impressive due to the safe functional back-stop feature and an easy-to-read permanent graduation.

Accessories Syringe filters 13 mm Accessories Syringe filters, ProFill, 17 mm Accessories Syringe filters 25 mm Accessories Syringe filters, ProFill, 30 mm Alternative Disposable syringes, Luer slip, non-sterile, PP

The transparent LABSOLUTE® multi-purpose beakers are made of PP and suitable for the storage of solids and fluids. Delivery including screw caps made of HDPE.

• Can be used in direct contact with food
• Autoclavable at 121 °C (without lid)
• 120 ml / 60 ml: with graduation and labelling field (last graduation mark: 100 ml / 50 ml)
• 200 ml: without graduation and labelling field

Alternative Sample containers, PP Alternative Sample beakers, sterile, individually packed Alternative Sample beakers, sterile, bulk packaging Alternative Sample beaker graduated, PP

Short thread screw seals ND9 are made of PP and are supplied with fitted septa made of a variety of materials. They have a 6 mm centre hole and are available in different colours. The screw caps are similar in shape to the crimp caps and are therefore also suitable for robotic handling.

These septa are temperature-resistant from -40 °C to 120 °C and are ideal for multiple injections thanks to their excellent resealability properties.

Accessories Short thread vials and micro-vials ND9, wide opening Accessories Short thread vials and micro-vials ND9, SureStop Accessories Short thread vials and micro-vials ND9, PMP or PP Alternative With RedRubber / PTFE septa Alternative With pure PTFE septa Alternative With silicone / PTFE septa Alternative With silicone / PTFE septa, Ultrabond Alternative With silicone / PTFE septa, magnetic Alternative MS short thread screw seal ND9

The disposable LABSOLUTE® test tubes are ideal for a variety of laboratory work. The tubes made of PP are characterized by a high thermal and mechanical strength. The crystal-clear tubes made of high-quality PS allow optimum visibility of the samples.

Accessories Winged caps for test tubes, PE Accessories Universal racks for different tube sizes, PP Accessories Racks for 15 ml centrifuge tubes, PA

LABSOLUTE® offers a comprehensive range in the field of PCR consumables. These include tubes, strips of 8 tubes, 96-well plates and sealing films. In addition to the standard profile variants with 0.2 ml working volume, we also offer some low-profile versions with a working volume of 0.1 ml in the case of strips and plates.

• Suitable for all common thermal cyclers
• Optimal heat transfer and short cycle times through very thin and uniform wall thickness

The LABSOLUTE® 96-well PCR plates offer optimum heat transfer between the thermal cycler and the reaction mix through their extra thin and uniform vessel walls. The plates are sealable with adhesive films, heat sealing films and cover strips with flat and domed caps. The slightly raised rims of the individual wells reduce cross-contamination and evaporation of the samples. The black alphanumeric coding allows optimal sample distinction. All plates are free of DNase, RNase and human DNA.

96-well, skirted, low profile
Skirted 96-well PCR plates are rigid and suited for processing and transportation by automatic pipetting systems. Cut corner: H1.

96-well, semi-skirted
96-well semi-skirted PCR plates can be easily labelled or tagged with a barcode. Cut corner: A12.

96-well, for Roche® LightCycler® 480
The plates are perfect for use in LC480. Homogeneous white coloration with titanium dioxide and a smooth surface reduce interfering autofluorescence signals. Cut corner: H12.

96-well, non-skirted
96-well non-skirted PCR plates are suitable for a broad spectrum of thermal cyclers. Cut corner: H12.

Accessories PCR adhesive foils Accessories  Alternative PCR tubes 0.2 ml, PP Alternative PCR cap strips, PP