Mills

Batch mill for 2 different grinding procedures:
Impact grinding of hard, brittle or non-elastic grinding materials with high-grade stainless steel beater. This beater can be used for a Mohs hardness up to 6 (incl. with delivery). Cutting grinding for pulverizing soft, fibrous materials with a cutting blade (not incl. with delivery).

• Moist and gluey materials can be pulverized by adding water
• Grinding chamber made of Tefcel (PTFE, glass fibre-reinforced) with stainless steel inlet (1.4571), useful volume 80ml (incl. with delivery). For embrittlement of grinding materials with liquid nitrogen in the grinding chamber
• Optionally, a 250ml grinding chamber is available

Specifications
Motor rating input / output:	160 / 100W
Speed:	28000rpm (off load)
Chamber vol.:	80ml
Power-on time ON/OFF:	1/10 min
Auto power off:	yes
Tangential speed:	53m/sec.
Max. sample granule size:	10mm
Dimensions (W x D x H):	85 x 85 x 240mm
Weight:	1.5kg
IP code:	IP 43
Supply requirements:	230V 50/60Hz
Tested to DIN EN IEC 61010-1.

Accessories Accessories for Grinding mill, A11 basic

Grinding vessels, lids, blades and scrapers for use with knife mill HM100.

Accessories Grinding balls, tungsten carbide Accessories Grinding balls, zirconium oxide Accessories  Accessories  Accessories  Accessories  Accessories  Accessories  Accessories

Accessories Accessories for Universal mill MultiDrive basic/control Accessories Accessories for Universal mill MultiDrive control

A 10.1 Cutter, stainless steel: For most brittle materials with a Mohs hardness up to 5.
A 10.3 Cutter, hard metal: Made from tungsten carbide for hard materials with a Mohs hardness up to 9.
A 10.2 Star-shaped Cutter, stainless steel: For specific lightweight materials like paper, dried plant parts, plastics and for smooth-elastic materials.
A 10.4 Grinding chamber reduction: For small grinding volumes.

A 11.1 Spare beater: For pulverising substances with a Mohs hardness up to 6.
A 11.2 Cutter: For pulverising soft, fibrous grinding materials.
A 11.3 Beater, hard metal: For pulverising substances with a Mohs hardness up to 9, chrome-carbide coated
A 11.4 Grinding container, 250ml: Made of polycarbonate with stainless steel inlet. Not suitable for cooling with N₂, only applicable with double beater A 11.6.
A 11.5 Spare grinding container, 80ml: Made of Tefcel (PTFE, glass faser-reinforced) with stainless steel inlet. Excellent resistance to chemicals and low temperatures (- 200 °C).
A 11.6 Dubbel beater: For use up to Mohs hardness 3. Only applicable with grinding chamber A 11.4.
A 11.7 Funnel: Prevents splashing by pouring in liquid nitrogen in the grinding chamber A 11.5.

The mixing attachments MBA 125 to 1000 ml made of glass can be dismantled completely and easily.
The mixing attachments MBA 2000 and MBA 4000 are made of stainless steel. Their robust safety lids have an integrated feed opening for dosing. Knife unit with 4 blades made of stainless steel, easy to dismantle for easy cleaning.

For the operation of the mixer 550 MB MICROTRON a safety hood is mandatory, please order separately.

Cryokit for cooling grinding jars with liquid nitrogen, for cold grinding, incl. 2 insulated containers (1 and 4 l), 2 grinding bowl tongs and 1 pair of safety goggles.

Alternative  Alternative  Alternative  Alternative  Alternative  Alternative  Alternative Grinding balls, zirconium oxide Alternative

Alternative Grinding balls, tungsten carbide Alternative  Alternative  Alternative  Alternative  Alternative  Alternative  Alternative

• Ring sieves 360° with trapezoid holes, stainless
• Retaining frame 360°, stainless

Further aperture sizes on request.

Suitable for disposable and reusable grinding chambers. By using the disposable grinding chambers the possibility of cross-contamination and the effort of cleaning is eliminated. The mills can be used for hard (Mohs hardness up to 5), dry and brittle materials. They are especially suitable for grinding seeds, such as corn and wheat. Increased safety, the operation of the mill is only possible with properly closed grinding chamber and closed lid.

• Clearly arranged, multilingual OLED-display
• USB interface for control and documentation of all the parameters
• Interval operation available
• Stepless adjustable speed
• Adjustable safety speed and time
• Programmable and storable test conditions
• Reproducible test results
• Timer
• Easy operation with touch keypad
• Dust proof sealed housing
• Quiet operation

Scope of supply:
Tube Mill control: incl. 1 x grinding chamber MT 40 and MMT 40.1 each
Tube Mill 100 control: incl. 1 x grinding chamber MT 40, MT 100 and MMT 40.1 each

Specifications	Tube Mill control // Tube Mill 100 control
Operating principle:	cutting/impact
Motor rating input/output:	100 / 80 W
Speed:	5000 to 25000 rpm
Chamber volume:	40 ml // 100 ml
Timer: Interval timer:	5 s to 3 min 5 s to 60 s
Overload protection:	yes
Circumferential speed:	65 m/s
Max. feed hardness:	5 Mohs
Dimensions (W x D x H):	180 x 300 x 170 mm // 180 x 300 x 212 mm
Weight:	2.7 kg // 2.8 kg
IP code:	IP 30
Power supply:	220-240 V, 50/60 Hz

Accessories Accessories for batch mill Tube Mill control / Tube Mill 100 control

The cross beater mill SK 300 is used for batch-wise or continuous preliminary and fine size reduction. This robust mill is suited for laboratories as well as for the rough conditions of a production environment. Thanks to the powerful drive and rotor speed up to 4000rpm it is often possible to achieve a final fineness <100 microns in one process.

Features:

• High throughput for batch-wise size reduction of large sample volumes
• Suitable for feed sizes up to 25mm
• Adjustable speed from 2000 to 4000rpm
• Defined final fineness due to bottom sieves with aperture sizes from 0.12 to 10mm
• Rapid cleaning thanks to easily removable cassette, hopper and push fit rotor
• Ring filter and collecting vessel with convenient, dust-tight bayonet catch
• Quick-action door lock safety lock and electric brake

Function principle:
Size reduction in the SK 300 takes place by impact and shearing effects. The air drawn in through the hopper by the cross beater accelerates the discharge of the ground material. The airborne fine fraction is separated off by a downstream filter system.

Supplied with: Cross Beater Mill with grinding insert, cross beater, baffle plates, filter hose, 5l collecting vessel

Bottom sieves and base frame, please order separately.
Feeders and bottom sieves in furrther sizes are available on request.

Specifications
Feed size:	up to 25mm
Final fineness:	approx. 0.1mm
Speed range:	2000 to 4000rpm
Dimensions (W x D x H) with base frame:	600 x 700 x 1200mm
Weight:	approx. 57kg
Power supply:	220-240V, 50/60Hz

Rapid and gentle size reduction of bulky, soft, medium-hard, fibrous, elastic and thermally sensitive materials. The most powerful model, the SM 300, is especially suitable for cutting heterogeneous mixtures such as household waste, plastic materials, computer and electronic scrap. The mills are also used for organic materials like wood, roots, bones, plants and feed pellets. They can be equipped with various rotors and hoppers. The SM 300 features a variable speed which makes it perfectly adaptable to the particular application requirements.

Features:

• powerful size reduction thanks to 3kW drive with high torque and RES technology (SM 300)
• perfect adaptation to application requirements by variable speed from 100rpm to 3000rpm (SM 300)
• optimum cutting effects thanks to double acting cutting bars (SM 200, SM 300)
• quick and easy cleaning without tools due to fold-back housing with smooth surfaces and push-fit rotor and sieves (SM 200, SM 300)
• defined final fineness due to bottom sieves with aperture sizes from 0.25mm to 20mm
• wide range of accessories including various hoppers, collection systems, rotors and sieves

Scope of supply:
SM 100: 5L collecting receptacle (Please order rotor, hopper, bottom sieve and base frame separately)
SM 200 / SM 300: 5L collecting receptacle, base frame (Please order rotor, hopper and bottom sieve separately)
Accessories available on request.

Specifications	SM 100 / 200 / 300
Feed size:	up to 60 x 80mm
Final fineness:	0.25 to 20mm
Retractable hopper:	-/ yes / yes
Push-fit rotor:	yes / yes / yes
Speed at 50 Hz:	1500 rpm (SM 300) variable 100 to 3000 rpm
Drive power:	1.5 / 2.2 / 3kW
Mains connection:	3/N~ 400V, 50Hz (SM 300) 220-230V, 50/60Hz

Accessories Rotors and Receptacles SM 100 / 200 / 300 Accessories Hoppers for Cutting Mill SM 100 Accessories Hoppers for Cutting Mill SM 200 / 300 Accessories Cyclone-suction-combination for cutting mill SM 200 / 300 Accessories Bottom sieves for cutting mill SM 100 / 200 / 300

Ideal for pre and fine comminution of soft to medium-hard as well as fibrous or brittle, tough materials. They are essential for the areas of plastics, textiles, agriculture and forestry, environmental, construction materials, chemistry and foodstuffs. All cutting parts can be removed for cleaning in just a few seconds without tools, unbeatable fast, simple and efficient. Variable rotational speeds, different rotors, various knife geometries and replaceable blades ensure maximum flexibility and durability. For controlling the abrasion properties, the cutting tools are offered in different materials. The optimum airflow ensures fast comminution and secure protection against clogging. The FRITSCH Cyclone seperators (optional) for sample exhaustion enable simple feeding due to the strong airflow, increase throughput, and reduce the thermal load of the samples.

Instruments also available in other voltages.
Funnels, rotors, sieve inserts/sieve cassettes and collecting vessels must be ordered separately.
FRITSCH also offers a Cutting Mill Combination which consists of the Universal Cutting Mill PULVERISETTE 19 and Power Cutting Mill PULVERISETTE 25.
The important effect is that samples with feed particle size of 120 mm max. can be ground to a few 100 µm within a short time and in a single operation. Ordering data on request.
The Universal Cutting Mills PULVERISETTE 19 are also available completely in stainless steel.

NEW: Universal Cutting Mill PULVERISETTE 19 now with variable rotational speed for optimal adjustment of the cutting speed to your sample material
Variable 300-3000 rpm is ideal for fine comminution of dry soft to medium-hard sample materials as well as fibrous materials and plastics.
Variable 50-700 rpm for powerful comminution of hard, tough-elastic and temperature-sensitive samples or an excessively high fine share need to be avoided.

Specifications
Max. feed size:	70 x 80 mm*
Rotation speed:	50 ... 3400 min-1
Sieve inserts:	0.2 ... 20 mm*

Accessories Accessories for cutting mill PULVERISETTE 15 Accessories Accessories for Universal Cutting mills PULVERISETTE 19 Accessories

Application:
The Cyclone Mill TWISTER is specially designed for the processing of foods and feeds for subsequent NIR analysis. The optimized form of rotor and grinding chamber generates an air jet which carries the ground sample through the integrated cyclone into the sample bottle. The air jet prevents the material from heating up, thus preserving the moisture content.

Features:

• Ideal for grinding feeds, grains, forage and other similar products
• 3 controlled speeds
• Cyclone separator with 250 ml collecting bottle for quick extraction of sample
• No cross contamination thanks to easy cleaning
• Convenient operating panel
• Professional industrial design with long lifetime

Specifications:

• Feed size: <10mm
• Final fineness: < 250 µm
• Batch size / feed quantity: <250 ml
• Speed setting: 10000 / 12000 / 14000 rpm
• Dimensions (W x D x H): 449 x 283 x 427mm
• Weight: approx. 14kg
• Power supply: 230 V, 50/60 Hz

Supplied with:
Cyclone Mill TWISTER complete with rotor, grinding ring, sieve inserts (1.0 mm and 2.0 mm), 10 sample bottles 250ml

Ideal for intermittent and continuous fine grinding within the medium particle size range of soft to hard, tough and temperature-sensitive solids in the areas of mining and metallurgy, glass industry, ceramics industry, soil research, rocks and soils.

Max. feed size:	20 mm
Throughput:	up to 150 kg/h
Final fineness:	0.1 ... 12 mm
Supply requirements:	400 V/3~, 50 Hz, 1790 W
Dimensions (W x D x H):	440 x 870 x 400 mm
Net weight:	140 kg

Accessories Accessories for disk mill PULVERISETTE 13 classic line

The PX-MFC 90 D is suitable for dry sample grinding in the laboratory. It"s possible to change the hammer and cutting mill sets.

• The blade grinding attachment is used for processing of dried, stringy and fibrous and grease-free materials. Application: Wood, straw, dried grease-free meat, leather, paper, carbon, synthetics etc.
• The hammer grinding attachment is used for processing of dried, brittle and grease-free materials. Application: Dried grain, dried beans, bones, rock, ceramics etc.
• Sieves 0.2mm up to 6mm diameter
• Safety system prevents start when lid is open
• Powerful three-phase motor
• Milling chamber with interchangeable inserts
• LED display
• Working volume of 300 ml (Funnel volume)
• 1000 Watt, 3-phase motor provides a low noise level during operation, with 230 Volt connection
• Sieves from 0.2 to 6 mm mesh size
• Integrated speed control with LED display for speed and status messages
• Speeds from 50 to 6,000 rpm for maximum grinding efficiency
• The motor cannot be operated when the chamber door is open
• Integrated overheating, overload and rotor blocking protection
• Safety stopper for certain grinding materials

Scope of supply: Mill with Hammer or Cutting Mill sets, 2 mm sieve, tool set, wooden stand with 12 collection tubes

Specifications
Application volume:	Hopper 300ml
Sieves:	0.2, 0.5, 0.8, 1.0, 1.5, 2.0, 3.0, 4.0, 5.0, 6.0mm
Motor input power:	1000W
Speed range:	speeds up to 6000min-1
Drive Dimensions (L x W x H):	251 x 325 x 480mm
Tested to:	IEC/EN 61000-6-2 / EN 61000-6-3 IEC/EN 61010-2-51

Accessories Attachements for Dry Mill POLYMIX® PX-MFC 90 D Accessories Sieves for Dry Mill POLYMIX® PX-MFC 90 D

Alternative  Alternative Grinding balls, sintered corundum Alternative  Alternative  Alternative

Alternative  Alternative  Alternative  Alternative Grinding balls, zirconium oxide Alternative

Accessories  Accessories Grinding balls, zirconium oxide Accessories Grinding balls, sintered corundum Accessories  Accessories  Accessories

Accessories Grinding balls, zirconium oxide Accessories Grinding balls, sintered corundum Accessories  Accessories  Accessories  Accessories

Accessories Grinding balls, sintered corundum Accessories Grinding balls, zirconium oxide Accessories  Accessories  Accessories  Accessories

With screw cap.

• Simple and safe handling
• Dust and air-tight
• Suitable for wet and cryogenic grinding

Accessories Grinding balls, tungsten carbide Accessories Grinding balls, zirconium oxide Accessories  Accessories  Accessories  Accessories  Accessories  Accessories  Accessories  Accessories  Accessories  Accessories Accessories for mixer mills MM 400 Accessories

Newly designed batch mill for grinding of hard, brittle, soft and fibrous materials for volumes up to 50 ml. Because samples may be embrittled directly in the grinding chamber; tough, oily and aqueous samples can also be grinded. During development of the mill, particular emphasis was placed on safety. The mill will only start when the lid is closed and it can only be opened at standstill. A quick stop feature further increases the safety of user.

• Digital timer
• Counter: Display of grinding time
• Interval operation
• Brushless motor for long life and low noise
• Integrated cooling connections
• Error Code Display
• Easy handling with keypads
• Easy exchangeable beater/cutter for a variety of applications
• Grinding chamber reduction for small sample amounts ( included with delivery)
• Easy opening and closing of the lid with a bayonet lock

Specifications
Motor rating input / output:	300 / 240W
Speed:	25000rpm
Chamber vol.:	50ml
Power-on time ON/OFF:	5 / 10min
Auto power off:	yes
Tangential speed:	73m/s
Max. sample granule size:	6mm
Dimensions (W x D x H):	130 x 145 x 250 mm
Weight:	2,9 kg
IP code:	IP 41
Supply requirements:	220 - 240 V 50/60 Hz

Accessories Accessories for Grinding mill, A10 basic

Accessories Aeration lid for grinding jar Accessories Grinding balls, tungsten carbide Accessories Grinding balls, zirconium oxide Accessories  Accessories  Accessories  Accessories  Accessories  Accessories  Accessories

The Emax is an entirely new type of ball mill for high energy milling for medium-hard, hard, brittle and fibrous materials. The combination of high friction and impact results in extremely fine particles within the shortest amount of time. Thanks to the cooling system with water, the high energy input is effectively used for the grinding process without overheating the sample. The Emax is capable of continuous grinding operation without interruptions for cooling down. The high energy input in combination with the unique cooling system provides perfect conditions for effective mechanical alloying or grinding down to the nanometer range.

• Speed of 2000 rpm allows for ultra-fast and fine pulverization of the sample
• Controlled water cooling allows for continuous operation without cool down breaks
• Temperature-controlled grinding
• Narrow particle size distribution thanks to special jar design which improves mixing of the sample
• 10 combinations of grinding parameters storable
• Operation with 2 grinding jars with integrated safety closure
• Range of jar materials allow for contamination free grinding

Accessories on request.

Specifications
Material feed size:	< 5mm
Final fineness:	< 80nm
Batch size / feed quantity:	2 x 45ml
Dimensions (W x D x H):	625 x 645 x 525mm
Power supply:	1-phase
Weight:	approx. 120kg

Accessories Beakers for high energy ball mill Emax

The Knife Mills Grindomix GM 200 and GM 300 are suitable for the rapid and reproducible size reduction and homogenisation of food and feed materials. They can process substances with a high water, oil or fat content just as quickly and reliably as dry, soft and medium-hard products.

• Very fast and reproducible grinding and homogenisation of foodstuffs, final fineness < 300 µm
• Speed-controlled industrial motor
• Autoclavable grinding tools
• Boost function allows short-term increase of speed up to 14000 rpm (GM 200)
• For sample volumes up to 700 ml (GM 200) or 4500 ml (GM 300)
• Digital display of grinding time and speed
• Interval operation possible
• Optional gravity lid for automatic adjustment of grinding chamber volume
• Storage of 4 program sequences possible (GM 200)
• 8 or 10 parameter combinations can be stored (GM 200 / GM 300)
• Drive power : ~ 1000 W (GM 200); continuous 1.1 kW, short term peak 3 kW (GM 300)
• Electrical supply data: 220-240 V, 50-60 Hz

Scope of supply:
GM 200: 1L plastic container, standard lid, stainless steel knife
GM 300: 5L plastic container, standard lid, stainless steel knife, scraper

Accessories Accessories for Knife Mill GM 200/300

The HM100 knife mill is used for grinding soft, medium-hard, brittle and fibrous materials. Especially suitable for samples with a high water, oil or fat content. The 2 knives are driven by a 900 W motor to achieve a reliable grinding result. Suitable for applications in agriculture, biology, medicine and food technology.

• For soft, elastic, fibrous, aqueous, oily or fatty samples
• Electronically controlled speed
• Samples are grinded in only 10 to 30 seconds
• Up to 700 ml sample volume
• Autoclavable grinding vessels
• Grinding vessels available in various materials
• Cutting knives with 2 stainless steel and titanium blades available
• Easy operation
• Quick start
• Coarse and fine grinding in one step
• Interval, reverse and manual mode available

Scope of supply: Knife mill, 1 l grinding vessel made of plastic (autoclavable), lid, stainless steel knife

Specifications
Feed size: Feed quantity:	40 mm 50 ... 700 ml
Ult. fineness:	<300 µm
Timer:	1 s ... 10 min
Motor speed:	2000 ... 10000 rpm
Power consumption:	900 W
Dimensions (W x D x H):	260 x 343 x 454 mm
Weight:	16 kg
Power supply:	220 V, 50 Hz

Accessories Accessories for knife mill HM100

For reproducible homogenisation of all common samples in food or feed testing, pharmaceuticals, chemicals and many other applications. The quietly operating knife mill is ideal for gentle grinding and homogenisation of moisty, oily and greasy as well as dry, soft, medium-hard and fibrous samples within seconds.

• Motor power up to 1250 Watt
• Variable speed setting with turbo function
• Standard, reverse and interval operation
• Knife blades with 4 cutting edges, up to 56000 cuts per minute
• Feed quantity up to 1400 ml (depending on material)
• Average grinding time only 30 seconds (depending on material)
• Fast cryogenic grinding
• 20 SOPs can be stored, USB interface for SOP management and generation of grinding reports
• Easy cleaning
• Sample-contacting parts such as grinding containers, lids and knives can be autoclaved

Scope of supply: Knife mill, grinding container 1.4 l made of polycarbonate, standard lid, standard knife made of stainless steel

Specifications
Max. feed size:	40 mm
Final fineness:	<300 µm
Speed range:	2000 ... 10000 min-1, turbo function up to 14000 min-1 for 6 s
Performance:	1250 W
Dimensions (W x D x H):	320 x 430 x 480 mm
Weight:	17,6 kg
Power supply:	200 ... 240 V, 50/60 Hz

Accessories Accessories for knife mill PULVERISETTE 11

Universal laboratory grinder, comprising powerful drive unit for use with a choice of accessory grinding heads. The user can choose between the impact grinding head for milling hard, brittle materials (see fig.) and the cutting head for processing fibrous material. The maximum granule size output can be set by using various insert sieves (with apertures between 0.25 mm and 4 mm) placed above the outlet. There is an NS29 standard ground joint at the outlet for attachment of receiving flasks.

Grinding/cutting heads not included.

Specifications
Motor rating input / output:	1000 / 500W
Speed range:	3000 to 6500rpm.
Tangential speed with impact grinding head:	31.4 m/sec.
Tangential speed with cutting head:	22.5 m/sec.
Material in contact with product:	Stainless steel AISI 316 L
Power-on time ON/OFF:	120/130mins.
Auto power off:	yes
Dimensions with grinding head (W x D x H):	320 x 300 x 380mm
Weight with grinding head:	9.7kg
IP code:	IP 22
Supply requirements:	230V 50/60Hz.
Tested to DIN EN IEC 61010-1.

Accessories Grinding heads for Microfine grinder drive MF 10 basic Accessories Sieves for Microfine grinder MF10 basic

Ideal for fine comminution of smallest quantities for wet and dry grinding as well as for cryogenic grinding. Its special spherical grinding bowl ensures much better performance in grinding, mixing and homogenising compared with similar models for example in chemical analysis, chromatography, mass spectrometry or x-ray structural analysis, preparation of samples for genetic research, homogenising of active ingredients, preparation of extracts in the forensic analysis, grinding of pigments and precious materials.

Max. feed size:	6mm
Max. sample quantity:	up to 5ml
Final fineness:	5µm
Supply requirements:	100-240V/1~, 50-60Hz, 20 W
Dimensions (W x D x H):	200 x 300 x 300mm
Net weight	7kg

Accessories Grinding bowls for mini mill PULVERISETTE 23

The CryoMill is designed for the cryogenic size reduction of materials which cannot be ground at room temperature or whose composition would be changed by it. The grinding jar is cooled before and during the grinding process with liquid nitrogen through an integrated cooling system. Thus the sample is embrittled and its volatile components are preserved. The size reduction principle is the same as that of the well-proven Mixer Mill MM 400. The CryoMill can also be operated without the cooling system which makes it suitable for a wide range of applications.

• Powerful cryogenic grinding by impact and friction, up to 30 Hz
• Closed LN2-system (autofill) for enhanced safety, avoids any contact of the user with LN₂
• Screw-top grinding jars for convenient, leak-proof operation
• Clearly structured user interface, memory for 9 SOPs
• Wide range of accessories including LN₂feeding systems, various jar and ball sizes, adapter racks, materials

Specifications
Feed size	up to 8mm
Ultimate fineness	< 5µm
Charge	max. 1 x 20ml
Adjustable frequency range	5 ... 30Hz (300 ... 1800 rpm.)
Dimensions (W x D x H)	385 x 675 x 370mm
Weight	40kg
Power supply:	100 - 240V, 50/60Hz

Accessories Grinding Jars for CryoMill Accessories Accessories for Mixer Mill, CryoMill

The mixer mills are true laboratory "all-rounders". They have been developed specially for grinding, homogenising and mixing of small amounts of sample in only a few seconds. They are also perfectly suitable for the disruption of biological cells as well as for DNA/RNA recovery.
The MM 400 can also be used for cryogenic and wet grinding.

• Grinding by impact and friction, for up to 20 samples per run
• 3 different grinding modes: dry, wet or cryogenic (MM 400)
• Screw-top grinding jars for leak-proof grinding (MM 400)
• 9 Standard Operating Procedures can be stored

Specifications
Feed size:	≤ 8 mm
Ultimate fineness:	approx. 5 µm
Charge:	max. 2 x 20 ml
Digital preselection of vibrational frequency:	3 ... 30 Hz (180 ... 1800 rpm.)
Power supply:	100 ... 240 V, 50/60 Hz

Accessories Grinding Jars for Mixer Mill MM 400 Accessories Accessories for mixer mills MM 400

For wet and dry grinding of hard, medium-hard, soft, brittle and temperature-sensitive samples for analysis, quality control and materials testing. It even grinds difficult samples with a moist, fibrous or elastic structures using liquid nitrogen. And it"s also excellently suited for mixing or homogenisation of organic and inorganic solids or liquids.

• Reproducible and accurate grinding results
• Precise adjustment and readout of the pestle pressure
• Short grinding and mixing times
• Loss and dust free

Max. feed size:	8 mm
Max. sample quantity:	up to 190 ml
Final fineness:	10 ... 20 µm
Supply requirements:	100-120 / 200-240 V/1~, 50/60 Hz, 300 W
Dimensions (W x D x H):	310 x 460 x 410 mm
Net weight:	24 kg

Accessories Accessories for mortar grinder PULVERISETTE 2

Suitable for dry and wet grinding of soft, brittle, hard and paste-like samples. Depending on the sample, amounts from approx. 10ml up to 190ml can be reduced in size, triturated and homogenised. With beech wood scraper (special accessory) for pharmaceutical and homeopathic applications. The RM 200 is exceptionally easy to operate and clean. With digital time control and performance display, scale for reproducible pestle setting, built-in automatic switch-off and rapid motor-stop.
Please order mortar and pestle separately.

Specifications
Feed size*:	max. 8mm
Batch size/Feed volume:	10 to 190ml
Final fineness*:	approx. 10µm
Dimensions (W x D x H):	400 x 370 x 480mm
Weight: approx:	approx. 24 kg (without grinding set)
Supply requirements:	220 - 240V 50Hz

Accessories Accessories for Mortar Grinder RM 200

Planetary Ball Mills are suitable for mixing and grinding soft, medium-hard, extremely hard, brittle and fibrous materials. They are used whenever high degrees of fineness down to the submicron range are to be achieved in a very short time. In addition to dry and wet grinding, they are also suitable for colloidal grinding and mechanical alloying. Typical materials are minerals, ores, chemicals, ceramics, soils, household and industrial waste etc.

Features:

• Extremely high ultimate fineness down to submicron range
• 1, 2 or 4 grinding stations
• Grinding jar volumes from 12ml to 500ml
• Suitable for long-term trials and continuous use
• Programmable starting time
• Power failure back-up ensures storage of remaining grinding time
• Reproducible results due to digital parameter setting
• 10 parameter combinations can be stored
• Single button operation with graphic display
• Automatic grinding chamber ventilation for cooling the grinding jars
• Grinding jars in 7 sizes and 8 different materials available

Supplied with: Planetary Ball Mill only. Grinding jars and grinding balls have to be ordered separately.

The PM 100 CM is a Planetary Ball Mill with a speed ratio of 1:-1. Size reduction is not so much achieved by impact but by pressure and friction which is more gentle on the material.

Specifications
Ultimate fineness:	< 1µm
Dimensions (WxDxH): PM 400	630 x 415 x 468mm 836 x 780 x 1220mm
Supply requirements:	230V, 50-60Hz

Accessories Grinding Jars for Planetary Ball Mills PM 100 / 100 CM / 200 / 400

Ideal for fast, loss-free fine grinding of hard, medium-hard, brittle and fibrous materials - dry or in suspension in the areas of geology, mineralogy, metallurgy, ceramics, materials research, mechanical alloying, pharmaceuticals, chemistry, biology, sample preparation for analysis.
Sample can be processed from a few mg to several kg at a wide range of fineness levels down to less than 1 µm. They are especially easy to operate and fast and easy to clean. Suitable for continuous, heavy duty usage and guarantee safe clamping of the grinding bowls.
Matching grinding parts of 7 different materials are available to provide max.
protection against undesired contamination. In addition to size-reduction, planetary ball mills can also be used for mixing and homogenising of emulsions and pastes or for mechanical alloying and activation.

FRITSCH also offers a Planetary Mill Generation premium line, for fast high-tech grinding down to the nano range, worldwide unique in operation, performance and safety, a new reference class. Information on the Planetary Mill PULVERISETTE 5 premium line and Planetary Micro Mill PULVERISETTE 7 premium line can be found in the LLG Online Shop.

Max. feed size:	10 mm
Final fineness:	< 1 µm
Grinding bowl sizes:	80, 250, 500 ml
Supply requirements:	100-120/200-240 V/1~, 50-60 Hz
Dimensions (W x D x H):	370 x 530 x 500 mm PULVERISETTE 6 classic line 580 x 670 x 570 mm PULVERISETTE 5 classic line

Accessories Grinding bowls for planetary ball mills PULVERISETTE 5 / 6 classic line Accessories Grinding balls, zirconium oxide

Ideal for high-performance grinding down into the nano range of hard, medium-hard, brittle and fibrous materials with extremely short grinding times dry, in suspension or in inert gas in the areas of nanotechnology, geology, mineralogy, metallurgy, ceramics, materials research, mechanical alloying/activation, pharmaceuticals, chemistry, biology, sample preparation for analysis. They are also the perfect choice for highly efficient mixing and homogenizing.
Grinding bowls and balls are offered in different sizes for optimal adaption to the sample volume and desired final fineness as well as in different materials to provide maximum protection against undesired contamination.
The completely brand new clamping of the grinding bowls, the automatic check of the fastening of the bowls inside the mill, the blockage of the mill in the event of impermissible operating states or imbalance and the automatic bowl detection guarantee maximum safety.

Specifications	PULVERISETTE 5 // PULVERISETTE 7 premium line
Max. feed size:	10 mm // 5 mm
Final fineness:	< 0,1 µm
Grinding bowl sizes	125/150 ml, 250 ml, 420/500 ml // 20 ml, 45 ml, 80 ml
Supply requirements:	200-240 V/1~, 50-60 Hz, 2800 W // 100-120 / 200-240 V/1~, 50-60 Hz, 1200 W
Dimensions (W x D x H):	820 x 520 x 480 mm // 400 x 580 x 360 mm

Accessories Grinding bowls for planetary mill PULVERISETTE 5 premium line Accessories Grinding bowls for planetary micro mill PULVERISETTE 7 premium line Accessories Grinding balls, sintered corundum

The rotor beater mill SR 300 is ideally suited for use in the laboratory and for small series production due to its robust design and the possibility to process large sample volumes. Grinding chamber, feed hopper and material inlet and outlet are completely made of high-quality stainless steel. The variable speed of up to 10000rpm allows for adaptation to specific application requirements.

Features:

• High throughput for batchwise size reduction of large sample volumes
• Speed from 3000 to 10000rpm
• Optional 180° grinding insert suitable for grinding hard, brittle samples
• Defined final fineness due to bottom sieves with aperture sizes from 0.08 to 10mm
• Easy cleaning thanks to removable cassette, hopper and push fit rotor
• Optional distance rotor suitable for heat-sensitive samples
• Ring filter and collecting vessel with convenient, dust-tight bayonet catch
• Quick-action door lock and motor brake

Function principle:
Size reduction and deagglomeration in the SR 300 are achieved by impact and shear effects. The quick-acting door lock ensures easy access to the grinding chamber for quick cleaning. With their motor brake (braking time < 0.5s), safety switch, splashback and access barrier in the inlet and outlet areas, Rotor Beater Mills offer the highest degree of operating safety.

Scope of supply: Mill with rotor, 5l collecting vessel, filter hose

Base frame, sieves and sieve frames, please order separately.

Specifications
Feed size:	<25mm
Final fineness:	<0.05 mm
Speed range:	3000 to 10000rpm
Dimensions (W x D x H) with base frame:	600 x 700 x 1200mm
Weight:	approx. 60kg
Power supply:	220-240V, 50/60Hz

Accessories Accessories for Rotor Beater Mill SR 300

Universal mill for the pre- and fine comminution of hard, soft or fibrous samples.

• Adjustable interval operation
• Integrated cooling in the grinding bowl
• Ground product and coolant remain disconnected
• USB interface

MultiDrive control additionally with:

• Temperature measurement and vessel recognition using RFID
• Temperature limit can be set for temperature-sensitive materials, or for specific planned reactions
• Integrated weighing function for weighing without transferring the material
• Dispersion vessel and a disposable tube are available as accessories

Please order vessels separately.

Scope of supply packages:
MultiDrive basic M20 successor package: MultiDrive basic, MI 250
MultiDrive control MT package: MultiDrive control, MultiDrive TC 1, MultiDrive MT 150.5
MultiDrive control BT package: MultiDrive control, MultiDrive TC 1, MultiDrive BT 250.5

Specifications	basic // control // basic M20 // control MT // control BT
Motor rating input/output:	1000 / 800 W
Speed:	3000 ... 20000 rpm
Throughput/Charge max:	250 ... 2000 // 150 ... 2000 // 250 // 150 // 250 ml
Feed size:	7 or 50 // 7 or 50 // 7 // 10 // 10 mm
Feed material hardness:	5 Mohs
Feed material hardness with hard metal beater:	9 Mohs
Dimensions (W x D x H):	300 x 250 x 350 mm
Weight:	10 // 8.5 // 8.5 // 8.5 kg
Power supply:	220 ... 240 V
IP code:	IP 31

Accessories Vessels for Universal mill MultiDrive basic/control Accessories Accessories for Universal mill MultiDrive basic/control Accessories Accessories for Universal mill MultiDrive control