Water baths

Pellets with 20 mm diameter. Can cover 0.1 m². Protect against evaporation and rapid temperature loss. Decreases hazardous vapors. Resistant against most acids, bases, solvents and mineral oils. Temperature stable up to 100 °C.

The unstirred, general purpose water baths are available in 5 sizes: 2, 5, 10, 20 and 28 liters.

• Color TFT display with control panel
• Calibration offset feature
• Low liquid alarm
• Over temperature alarm
• 5 user programmable pre-sets (temperature and duration)
• 5 languages (English, German, French, Spanish and Chinese)
• Integrated independent timer
• Eco-mode
• Safety thermostat
• High-gabled, clear lids accommodate taller media bottles
• Rear-mounted drain (10, 20 and 28 liters)
• Recessed Handles

General purpose water baths with stable temperature control, simple controls and fast heat up. A choice of four models with a base tray and lid included as standard.

• Ambient +5 °C to 95 °C
• Unique Set and Forget™ technology, fast reliable temperature control
• Stability ± 0.5 °C
• Simple, intuitive controls, quick and easy to set temperature
• Drain tap on 12L, 18L and 26L baths
• Practical front panel lock - disables front panel controls preventing unintentional temperature changes
• 3-year warranty

An economical alternative to integrated heating baths for liquid temperatures up to 150°C. Controller bridge rests securely on the bath, yet is easily removed for tank cleaning. Generous bath opening provides ready access to samples and the included bath cover improves stability.

• Working temperatures from ambient +10° up to 150°C
• Advanced Programmable, Advanced Digital or MX Temperature Controller
• 6, 10, 20 or 28 liter reservoir
• DuraTop™ Chemical Resistant Bridge, Swivel 180™ Rotating Controller (on Advanced Programmable and Advanced Digital models)
• Lidded opening for optional cooling coil (10, 20 and 28 liter models)
• External circulation capability
• Complies with DIN 12876-1 Class I safety requirements for use with non-flammable liquids
• Incl. bath cover

For use with Immersion circulator LX and MX.

Flat cover: Flat stainless steel cover with openings and concentric ring sets
Gable cover: Stainless steel gable cover, also suitable for shaking device and Peltier cooling device
Shaking device: Shaking device including support frame (for racks or support basket with perforated mounting shelf) for use in water baths, shaking speed 35-160 strokes per minute (horizontal back/forth movement), requires gable cover
Peltier-cooling device CDP115: For precise operation with temperatures starting from +10 °C. The temperature is controlled via the electronic controller of the waterbath with a precision of ±0.1 K. Easy fitting to bath by snap-on-technology, suitable for all tank sizes. Power supply: 230 V, 50/60 Hz or 115 V, 60 Hz (please state in case of order). Effective cooling capacity: 115W. Pumping capacity of circulation pump for coolant: 600ml/min
Bottom grid: reversible for 2 heights (30 mm and 60 mm)

Flat lid for unstirred water baths. With ring sets of variable hole diameter to accommodate tall vessels whilst reducing evaporation.

An ideal choice for schools and colleges requiring a basic simple-to-use quality water bath. Base tray included as standard. A great value range consisting of three models.

• Ambient + 5 °C to 95 °C
• Unique Set and Forget™ technology, fast heat-up, reliable temperature control
• Stability ± 0.5 °C
• Simple, intuitive controls, quick and easy to set temperature
• Practical front panel lock, disables front panel controls preventing unintentional temperature changes
• 3 year warranty

The general purpose water baths, Precision, are rugged, high performance baths for temperatures up to 100 °C (TSGP02 up to 90 °C). Over-temperature safety circuit is designed to prevent thermal runaway. Benefit from outstanding chemical and corrosion resistance with epoxy powder-coated exterior, and easily clean the chamber with its seamless stainless-steel interior. With timer.

• Advanced microprocessor controller is designed for extended functionality
• Protect your work with audible alarms
• Conveniently save commonly used settings with four temperature presets
• Clear polycarbonate gable cover

The circulators are available in 4 bath sizes combined with 4 different temperature controllers. The large, 180° freely rotatable display Swivel 180™ allows good visibility and control of the values set from different angles.

• Reservoir sizes ranging from 7 liters to 75 liters
• Pressure and suction pump (selected models)
• LidDock™ lid holder
• DuraTop™, precision-molded phenolic bath top resists laboratory chemicals
• WhisperCool^® Environmental Control System
• Cool Command™ refrigeration system
• Washable air filter
• Large bath opening and drain
• Easy hook-up of fluid connections
• Intuitive setup and operation, featuring multi-language help and screen prompts
• Simplified setup and maintenance
• Over-temperature protection
• Safety classes, according to DIN 12876-1 Class III standards for use with flammable liquids (selected models)

• Temperature Stability: ±0.01 °C
• Intuitive 3.75" (9.5 cm) display with touch-pad control
• 4 languages: French, German, Spanish, English
• Swivel 180™ Rotating Controller
• Variable speed pump with open- and closed-loop external circulation capability
• Pump pressure max. 3.6 psi (0.25 bar)
• On-board connectivity: USB-A & B, Ethernet, RS-232 / RS-485 and external temperature probe
• On-screen prompts
• Automatic performance optimization and specific heat tuning
• Single-point calibration capability

The insulated stainless steel baths are suitable for use up to 200°C. All models have a bridge-mounted immersion circulator. With a pump adapter, this combination can also be used with externally closed and externally open (with option level control) applications. Models with the Pilot ONE controller have a variable speed pressure/suction pump and are therefore also suitable for external open applications.

Hinged lids protect against contamination and loss of liquid through evaporation.

Stainless steel. Choice of 8 variants to accommodate different tube diameters and microtubes. J2-SE and J2-LE are for microcentrifuge tubes.

The circulators are available in 4 bath sizes combined with 4 different temperature controllers. The large, 180° freely rotatable display Swivel 180™ allows good visibility and control of the values set from different angles.

• Reservoir sizes ranging from 7 liters to 75 liters
• Pressure and suction pump (selected models)
• LidDock™ lid holder
• DuraTop™, precision-molded phenolic bath top resists laboratory chemicals
• WhisperCool^® Environmental Control System
• Cool Command™ refrigeration system
• Washable air filter
• Large bath opening and drain
• Easy hook-up of fluid connections
• Intuitive setup and operation, featuring multi-language help and screen prompts
• Simplified setup and maintenance
• Over-temperature protection
• Safety classes, according to DIN 12876-1 Class III standards for use with flammable liquids (selected models)

• Temperature Stability: ±0.01°C
• Intuitive 3.75" (9.5 cm) display with touch-pad control
• 4 languages: French, German, Spanish, English
• Pump speed variable external temperature control capability
• Pump pressure max. 3.6 psi (0.25 bar)
• On-board connectivity: USB-A & B, Ethernet, RS-232/RS-485 and external temperature probe
• Adjustable over- or under-temperature
• On-screen prompts
• Safety class III
• Single-point calibration capability

The circulators are available in 4 bath sizes combined with 4 different temperature controllers. The large, 180° freely rotatable display Swivel 180™ allows good visibility and control of the values set from different angles.

• Reservoir sizes ranging from 7 liters to 75 liters
• Pressure and suction pump (selected models)
• LidDock™ lid holder
• DuraTop™, precision-molded phenolic bath top resists laboratory chemicals
• WhisperCool^® Environmental Control System
• Cool Command™ refrigeration system
• Washable air filter
• Large bath opening and drain
• Easy hook-up of fluid connections
• Intuitive setup and operation, featuring multi-language help and screen prompts
• Simplified setup and maintenance
• Over-temperature protection
• Safety classes, according to DIN 12876-1 Class III standards for use with flammable liquids (selected models)

• Temperature Stability: ±0.005°C
• Time/temperature programming
• Intuitive 4.3" (10.9 cm) SmartTouch display
• 11 languages: French, German, Spanish, Chinese, Arabic, English, Portuguese, Russian, Hindi, Italian, Korean
• Variable speed pump with open- and closed-loop external circulation capability
• Pump pressure max. 3.6 psi (0.25 bar)
• On-board connectivity: USB-A & B, Ethernet, RS-232/RS-485, remote on/off and external temperature probe
• Event scheduling (time and date) with real-time clock
• Review temperature trends for up to 10 days
• Multiple selectable "home" screens
• On-screen help
• Automatic and/or user-adjustable performance optimization
• Safety class III
• 10-point calibration capability

The circulators are available in 4 bath sizes combined with 4 different temperature controllers. The large, 180° freely rotatable display Swivel 180™ allows good visibility and control of the values set from different angles.

• Reservoir sizes ranging from 7 liters to 75 liters
• Pressure and suction pump (selected models)
• LidDock™ lid holder
• DuraTop™, precision-molded phenolic bath top resists laboratory chemicals
• WhisperCool^® Environmental Control System
• Cool Command™ refrigeration system
• Washable air filter
• Large bath opening and drain
• Easy hook-up of fluid connections
• Intuitive setup and operation, featuring multi-language help and screen prompts
• Simplified setup and maintenance
• Over-temperature protection
• Safety classes, according to DIN 12876-1 Class III standards for use with flammable liquids (selected models)

• Temperature Stability: ±0.07°C
• 3.25" LCD Display
• Pressure Pump with one pump speed
• Maximum Pressure: 1.8 psi (0.12 bar)
• External circulation: closed loop
• Safety class I
• Single-point calibration capability

The circulators are available in 4 bath sizes combined with 4 different temperature controllers. The large, 180° freely rotatable display Swivel 180™ allows good visibility and control of the values set from different angles.

• Reservoir sizes ranging from 7 liters to 75 liters
• Pressure and suction pump (selected models)
• LidDock™ lid holder
• DuraTop™, precision-molded phenolic bath top resists laboratory chemicals
• WhisperCool^® Environmental Control System
• Cool Command™ refrigeration system
• Washable air filter
• Large bath opening and drain
• Easy hook-up of fluid connections
• Intuitive setup and operation, featuring multi-language help and screen prompts
• Simplified setup and maintenance
• Over-temperature protection
• Safety classes, according to DIN 12876-1 Class III standards for use with flammable liquids (selected models)

• Temperature Stability: ±0.04°C
• Large 3.75" universal icon and English display
• Pressure Pump with two speeds
• Pump pressure max. 2.9 psi (0.20 bar)
• On-board connectivity: RS-232 serial output
• Adjustable over- or under-temperature
• Automatic performance optimization
• Safety class I
• Single-point calibration capability

With their excellent temperature homogeneity, the universal Hydro shaking water baths are designed for the needs of biological, medical or biochemical laboratories. The models H 20 S and H 20 SW shaking water baths have a linear, oscillating shaking movement, while model H 20 SOW moves the sample in an orbital motion.

• For boiling range applications
• TFT display
• Speed controller for load-independent, continuously adjustable shaking movement
• Soft, controlled start of the shaking movement
• Dry run protection (safety class I, NFL)
• Maintenance free and reliable
• H 20 SW and H 20 SOW with integrated cooling coil

Stainless steel with perforated mesh shelf. Used to alter the effective depth of the bath. Each shelf occupies half the area of the bath specified and so allows both deep and shallow vessels to be accommodated. Dual bath shelf covers half area of the dual 12 tank.

Test tube racks made of PP. In combination with the separately available base tray, suitable for tempering test tubes in shaking water baths.

SBB Aqua Plus boiling baths Provide continuous 100°C operation.

• A choice of 4 models
• Stainless steel tank
• Non-drip polycarbonate lid and perforated tray (to ensure uniform heat distribution), included as standard
• Two over-temperature cut-outs protect users and the workspace if bath is accidentally run without water
• Adjustable energy regulator provides steady boiling
• Constant level device maintains liquid level for optimal operation
• 3 year warranty

High quality and excellent temperature stability, in a value-for-money package designed to meet the needs of the world`s researchers. The SUB Aqua Pro range is composed of eight models, including shallow and dual baths.

• Three programmable temperature presets
• Drain tap on SUB Aqua Pro 12, 18, 26 and 34
• Front panel lock-out
• Countdown timer with audible buzzer
• Ambient +5 °C to 99 °C operation
• Stability ± 0.2 °C
• Digital PID control for quick heat-up and precision control throughout the temperature range
• User-settable sample protection and fixed thermal cut-out
• High grade stainless steel tanks
• Non drip polycarbonate lid and base tray included as standard

The Hydro water baths are optimally equipped for every application in the laboratory. With their precise temperature distribution, they are designed for the needs of biological, medical or biochemical laboratories. The H 8 A and H 16 A models are also equipped with a circulation system for optional mixing.

• Interior made of high quality stainless steel
• Applications in the boiling range possible (temperature range: 25 to 100 °C)
• TFT color display for intuitive operation, temperature display in °C and °F
• Programmable timer
• Optical and acoustic alarm in the event of an error

Plastic bottle containing 100 ml concentrate for 100L water.

• Suitable for all kinds of thermostats and circulation pumps made of metal, glass or any plastics
• Can also be used for closed temperature control systems, e.g. pH blood gas analyser
• Prevents algae and bacterial growth, no odour formation
• No obstructions in tubings and temperature control system
• Frequent cleaning of the tank is unnecessary
• Solution is without aggressive phosphates and oxidising or reducing substances
• Only insignificant pH value change of the water
• Solvent-free
• Prevents foam formation, even with strong circulation
• Application: Take 1 ml of the solution for 1L of distilled water (Clean the tank before use!)

Suitable for temperature control tasks close to ambient temperature.

This bath is ideal for fecal coliform and E.coli testing.

• MX Temperature Controller
• Includes gabled, see-through cover
• Includes cooling coil port
• Over-temperature protection
• Single-point calibration capability

Complete, ready-to-connect temperature control systems with immersion circulator, multi-position magnetic stirrer, plastic bath and required accessories. For liquid temperature control and stirring tasks in open plastic bath tanks up to a temperature of 100 °C. The thermostat is suitable for internal and external applications. With visual and acoustic warning functions for excess temperature, sub-level and over-level level, adjustable safety circuit and USB/RS 232 interface. An external cooling coil can be connected to the circulators for temperatures down to -20 °C. Can be calibrated.

The digital magnetic stirrer included in each set has 15 stirring points for glass vessels with a volume of up to 250 ml each. It is equipped with adjustable reverse operation, wear-free magnetic coils and is suitable for continuous operation. The stirrer is controlled via a touch keypad.

ICC basic IB R RO 15 eco
The set contains the ICC basic compact immersion circulator with integrated pressure and suction pump, carrying handle and stand. It is controlled via an LED display as well as push and turn buttons.

Also included in the set:

• IB R RO 15 Plastic bath (15 l, size L)
• RO 15 Magnetic stirrer
• BL.ICC bath bridge

Cryoprecepitate Baths are suitable for safe and reliable thawing of Fresh frozen Plasma (FFP). 24 Units of FFP can be thawed simultaneously. The bath is additionally equipped with a hinged polycarbonate gable cover and a reservoir drain.

• Digital Temperature Controller
• Connectivity: RS232
• High efficiency fluid filter
• Removable air filter
• Over-temperature protection
• Single-point calibration capability

The general purpose water baths, Precision, are rugged, high performance baths for temperatures up to 100°C. Over-temperature safety circuit is designed to prevent thermal runaway. Benefit from outstanding chemical and corrosion resistance with epoxy powder-coated exterior, and easily clean the chamber with its seamless stainless-steel interior. With timer.

• Advanced microprocessor controller is designed for extended functionality
• Protect your work with audible alarms
• Conveniently save commonly used settings with four temperature presets
• Clear polycarbonate gable cover

Refrigerated/heated calibration baths are suitable for demanding temperature control tasks for applications in industry, quality control and life science. Accomodates up to 6 temperature measurement devices with a diameter of 2 to 8 mm. The calibration baths are additionally equipped with a reservoir drain and over-temperature protection and are supplied with an insulating, chemical-resitant DuraTop™ bath top.

• Advanced Programmable temperature controller
• 11 languages: French, German, Spanish, Chinese, Portuguese, Russian, Hindi, Arabic, Italian, Korean, English
• Swivel 180™ rotating controller
• Connectivity: Ethernet, USB A and B, RS232/ adressable RS485, Remote On / Off, external temperature probe
• Event scheduling (time and date), real-time clock, and temperature trends for up to 10 days
• WhisperCool^® Environmental Control System
• Cool Command™ refrigeration system
• Washable air filter
• Automatic and/or user-adjustable performance optimisation
• 10-point calibration capability

For continuous operation. Electrical sand baths with thermostatic temperature control and separate power controller for performance adjustment to the heating requirements. Anodised aluminium alloy hotplate. Excellent uniform temperature distribution over the entire heating surface. Asbestos free. The sand bath frame is tightly screwed onto the hotplate so that the sand is in direct contact with the hotplate. Useful depth 50mm. Stainless steel controller housing, with painted central section. Height-adjustable feet. Connection cable approximately 1.7m. With earthed plug for 230V supplies up to 3300W. A 400V 3-phase model is also available.

These polyphenylene oxide baths are a good alternative to stainless steel baths. The circulators can be mounted on all four sides of the bath for easy reading. The SC 100 controller is equipped with 3 languages, audible and visual alarms and 5 user-definable programs. Two pump speeds allow the flow rate of the water to be adjusted to avoid turbulence.

• Robust
• Corrosion-resistant
• Intuitive user interface
• Bright display
• Circulators are freely rotatable

Universal water baths made of stainless steel with external heater, installed separately in the housing. With integrated overheat protection.

Analog universal water bath with thermostatic heat controller and adjusting knob.

Digital universal water bath with actual value temperature display measured by a PT 100 sensor. Timer with acoustic signal.

Please order stainless steel butyrometer stand for 36 butyrometer separately.

With their stable, low-wear mechanics, the Hydro steam baths ensure particularly quiet operation and reliable continuous operation. For gentle evaporation work from columns, Erlenmeyer flasks, beakers, with 1, 4, 6 or 8 openings. With their precise temperature distribution, they are designed for the needs of biological, medical or biochemical laboratories.

• With »GFL Technology« for the highest quality, reliability and durability
• Water level regulator as standard
• Removable perforated lid made of heat-resistant plastic
• H 11 V and H 19 V completely made of stainless steel, suitable for the evaporation of aggressive media

Viscosity baths are suitable for precise temperature control tasks and have been specially designed for viscosity tests with all common capillary viscometers including ASTM D0445. 6 viscosimeter openings (Ø 51 mm) are located in the insulating and chemical-resistant DuraTop™ bath top. The devices are additionally equipped with a tap water cooling coil and an over-temperature protection.

• Round glass tank
• Advanced digital temperature controller
• 4 languages: english, french, spanish, german
• Swivel 180™ rotating controller
• Connectivity: Ethernet, USB A and B, RS232/ adressable RS485
• Variable speed pump with external circulation in open and closed loop
• Automatic performance optimization
• Single-point calibration capability

Viscosity baths are suitable for precise temperature control tasks and have been specially designed for viscosity tests with all common capillary viscometers including ASTM D0445. 6 viscosimeter openings (Ø 51 mm) are located in the insulating and chemical-resistant DuraTop™ bath top. The devices are additionally equipped with a tap water cooling coil and an over-temperature protection.

• Round glass tank
• MX temperature controller
• Pump with 1 speed and external circulation in closed loop
• Single-point calibration capability

This precise digital bath has been specifically designed to be used with the Stuart rotary evaporators to give maximum efficiency for the smallest footprint. The clear LED digital display shows the actual bath temperature or the set temperature. Outer case is made from chemically resistant polypropylene.

• Digital temperature display, display resolution 1 °C, temperature control ±1 °C
• Corrosion resistant bowl
• Easy to clean
• Integrated carry handle
• Cool touch outer case

The laboratory water bath with the highest degree of comfort is available in six model sizes. The operating concept impresses with its intuitive and convenient menu navigation. A particular highlight: Thanks to the personalisable remote viewing through the CustomView, you always have an eye on the important information.
The modular concept of this modern water bath guarantees maximum flexibility. If the application calls for it, a circulation pump, cooling unit, shaking device and test tube holder or insertable rack can easily be retrofitted.

Standard equipment: Stainless steel gable cover, Drain system, Timer