Isolated transport boxes, cooling boxes

The insulation boxes are suitable for the transport and storage of temperature-sensitive products.

• To maintain cold chains
• Stackable

Icecatch^® cool packs for temperature sensitive products used in the pharmaceutical, biotech, medical and food industries. Icecatch^® cool packs distinguish themselves through the following specific features:

• Reliable cold storage through the use of immobilised coolant
• For repeat usage due to the use of robust PA/PE film
• Disposal with the domestic trash due to the use of non-poisonous ingredients
• Unobjectionable use in the pharmaceutical and food industries
• Phase transition 0°C

• Spreading of heat absorption around the 0°C range through the use of immobilised cooling gel
• Optimal price / heat absorption capacity relationship
• Filled with cooling gel

• Maximum dimensional stability during the freezing process through the use of hard foam
• Filled with hard foam

• A perfect cool pack in combination with our System packaging for the +2 °C up to +8 °C transport
• Maximum dimensional stability during the freezing process through the use of hard foam, coolant and integrated isolation layer
• Filled with hard foam and isolation layer

• Composition: water, carboxymethyl cellulose, acticides and blue dye
• Suitable for food contact (non-toxic coolant)
• Dishwasher safe

Rigid polyurethane container provides durability for chilling your temperature sensitive samples. Excellent insulation properties for ultra cold. Use with ice, dry ice and ice-salt slurries, etc. For low temperature use down to -196°C. Minimize evaporation loss with close fit lid. Easily remove with comfortable recessed knobs. Keyed lid and base fit together to conveniently store lid under base. With spout and ergonomic handles for safe handling. Stackable.

• Strong, high quality PU insulation,
• Lockable lid, which clicks audibly when closing
• Handle for easy transport

With 120mm diameter screw cap in blue HDPE, vial holder made of white HDPE. Foam interior. Cooling rate 1°C/min. Tubes can be easily removed. Each aperture has a moulded number for identification. Stackable.

• Strong, high quality PU insulation
• Compact and robust cool boxes
• Cover can be locked with carrier bracket
• Rubber seal for airtight seal

The economical alternative for keeping samples and biochemical reagents cool at the workbench or for protecting against temperature fluctuations and power failure in refrigeration apparatus. With write-on, gridded lid. Lids fit one way to maintain the correct grid orientation. Robust, space-saving and stackable. With non-slip rubber feet. Can be used down to -135°C. Adapters are also supplied for 0.5ml microtubes.

Mini coolers are designed to protect a wide range of solutions (enzymes, DNA, RNA, cell suspensions) by helping to maintain freezer temperatures on the lab bench. Durable polycarbonate filled with non-toxic gel. Mini coolers hold twelve 0.5 ml to 2.0 ml tubes.

FreezerCell™ can be used for a variety of cell types, including stem cells, primary cells, cell lines and yeasts. The FreezerCell™ does not require any additives and only needs to be placed in an ultra deep freezer and the cooling runs at -1°C per minute. Fill the freezing aid with the cryotubes and freeze for approx. 3 hours at -80 °C. Then the samples are readyto transfer to a nitrogen tank. This gentle method ensures a high survival rate of the cells during the freezing process.

• No pre-cooling necessary
• Consistent temperature distribution, even with partial loading
• Lid can be opened easily

Use to protect samples on the bench, during transport, or in freezers with defrost cycle and fluctuating temperatures
Polycarbonate. A non-toxic freezing gel is isolated within the walls of the cooler, guaranteeing that labels or marks on the vials or tube are not damaged.

• The indexed and transparent (9.401 090, 9.401 091, 9.401 092) or gel-filled (9.401 093, 9.401 094) polycarbonate lid shows tube location and matches locations printed on the cooler
• Side handles ( 9.401 090, 9.401 091) or a wire handle for easy carrying
• Coolers can be stacked to save space and maximize freezer volume
• Rubber feet to prevent slipping
• All polycarbonate cooler body easy to clean

Cooling capacity: 20 °C (± 1 °C) at ambient temperature.

Blue. FreezeBox™ is a new, energy-saving, environmentally friendly and safe cooling equipment, without additives. It does not require electricity (except for pre-cooling the cores in the freezer) and no ice for low-temperature cooling of biological samples. The system can be used ice-free, is lightweight, easy to transport and ideal for the collection and storage of biological samples. It can be combined with interchangeable cores and different tube modules. Cooling cores can be tempered in a refrigerator or freezer and inserted into the FreezeBox™. For operation with dry ice, leave out the cooling core and fill with 200 g dry ice instead.

• For use with cooling core, ice or dry ice
• Easy to clean and disinfect
• Durable, suitable for frequent use
• Easy to mount

Reusable, economical and moisture resistant plastic. Made from polypropylene material. Easy self-assemble boxes shipped flat-packed saving space in the laboratory. More durable than card boxes as they are not susceptible to moisture. Significantly reduces the chance of mould. Suitable for repeated freezing and defrosting. Dividers included with the boxes.
Store down to temperatures of -196 °C.

The cold boxes are small benchtop units for cooling and freezing in all laboratories. Due in particular to its compact space-saving design and the low-noise cooling unit, the cold box is suitable for direct use in the workplace.

• Vacuum-Insulation: large interior space with small external dimensions and low power consumption
• Extremely low noise refrigeration unit
• Models with temperature range -85 °C with two-stage cascade refrigeration system
• with natural refrigerants (R-290, R-170)
• Interior made of high quality stainless steel
• Interior without fittings allows easy cleaning and disinfection
• Side air vent, so suitable for installation directly on walls
• Bushing (diameter 10 mm), e.g. for temperature monitoring with external sensors
• Maximum safety, due to mains-independent alarm, battery lasting approx. 72 hours
• Visual and audible signal
• Microprocessor-controlled with membrane keyboard and easy-to-read LED display
• Potential-free contact for connection to an external alarm system
• RS485 interface
• 100 mV/K-output for connection to a temperature recording system
• Lockable insulating door with door frame heating and double magnetic seal with additional sealing surface
• Stackable unit, max. 2 units

• Touchscreen control with color display and integrated data logger for full traceability
• User-friendly menu structure, remote access via network / internet
• Real-time display of the temperature profile and further values
• Recording the temperature profiles and alarm events
• Integrated memory with up to 12 years memory capacity
• Data for transfer to PC can be read out via USB interface
• Ethernet interface (RJ45)

Modular system for transporting, storing, and gently thawing deep-frozen samples.

• Holds 24 tubes (0.5ml, 1.5ml, 2ml)
• IsoPack (cold pack) white for 0°C and blue for -21°C, for pre-cooling in the freezer
• IsoTherm cooling times from = 6 hrs. (0°C, white) and = 3 hrs. (-21°C, blue)
• No more melting ice baths (contamination risk)
• All system components can be used separately
• Racks can be stacked, are autoclavable, float in water and can be centrifuged in a microtitration plate rotor

For storing of cryo boxes 130 x 130 mm, 133 x 133 mm und 136 x 136 mm. With handles.

For glass bottles with dangerous contents. With BAM approval.

The containers of the VOYAGEUR series are particularly intended for the transport of biological samples. The liquid nitrogen is absorbed in a porous substance, so that the storage of the samples takes place in the gaseous phase and even in a possible accident no liquid nitrogen can leak or splash out.