Dishes

LABSOLUTE® crystallizing dishes with or without spout are made of high-quality borosilicate glass 3.3 and are therefore extremely temperature-resistant up to 500 °C. Therefore the dishes can be easily autoclaved. They have a functional labelling field and are resistant to cold alkaline solutions/lyes and strong acids, with the exception of hydrofluoric acid and hot, concentrated phosphoric acid.

Comply with DIN 12338.

LABSOLUTE® evaporating dishes with a flat bottom and a functional spout are made of high-quality borosilicate glass 3.3 and are therefore extremely temperature-resistant up to 500 °C. The autoclavable evaporating dishes comply with DIN 12336 and are resistant to cold alkaline solutions/lyes and strong acids, with the exception of hydrofluoric acid and hot, concentrated phosphoric acid.

LABSOLUTE® crystallizing dishes with or without spout are made of high-quality borosilicate glass 3.3 and are therefore extremely temperature-resistant up to 500 °C. Therefore the dishes can be easily autoclaved. They have a functional labelling field and are resistant to cold alkaline solutions/lyes and strong acids, with the exception of hydrofluoric acid and hot, concentrated phosphoric acid.

Comply with DIN 12337.

LABSOLUTE® evaporating dishes are ideal for drying, concentrating and ashing sample material and comply with DIN 12903. They are glazed on the inside, temperature-resistant up to 1000 °C and have a useful spout. All LABSOLUTE® evaporating dishes are characterized by their high resistance to alkaline solutions and acids with the exception of hydrofluoric acid.

LABSOLUTE® evaporating dishes are ideal for drying, concentrating and ashing sample material and comply with DIN 12903. They are glazed on the inside, temperature-resistant up to 1000 °C and have a useful spout. All LABSOLUTE® evaporating dishes are characterized by their high resistance to alkaline solutions and acids with the exception of hydrofluoric acid.

The evaporating dish is characterised by high thermal and chemical resistance. Suitable for a variety of laboratory applications. With practical spout and flat bottom.

• Glazed
• According to DIN 12903
• Temperature resistant up to 900 °C

Ideal for evaporating liquids or solvents. Glazed.

• With spout
• Temperature resistant up to 900 °C

Ideal for heating and melting of materials. Glazed.

• With handle and spout
• Temperature resistant up to 900 °C

Crystallising dishes with or without spout. DIN 12337 / 12338. Autoclavable.

Ideal for evaporating liquids or solvents. Glazed on the inside and outside.

• With spout
• Temperature resistant up to 900 °C

Alternative to borosilicate glass dishes for similar applications. Manufactured from seamless and robust stainless steel.

Manufactured from stainless steel as round bottom. A perfect product for heating and evaporating liquids. Can be used with direct flame in order to prevent breakage.

• DIN 12338
• With spout
• Dishes with capacity of 100ml and above have labelling patch
• Glass Type I / neutral glass as per USP, EP and JP
• Autoclavable

With base. Resistant to steam sterilisation (121°C). Autoclavable.

• DIN 12341
• Flame-polished edges
• Autoclavable

Round bottom with spout. DIN 12903. 10 to 310ml sizes are completely glazed inside and out. 640 to 3400ml sizes are glazed with the exception of the outer base.

Glazed inside and outside except for rim.

White multi-purpose trays. Injection-moulded. Durable and resist flexing, with strong, rounded rim. Stackable and hygienic. Surface is easy-to-clean. Resistant to many acids and alkaline solutions. Food-safe. Temperature resistant up to 60 °C.

• DIN 12336
• Flat-bottom with spout
• Autoclavable

With flanged rim. Polished finish.

Suitable for foodstuffs and general laboratory use. High impact polystyrene.

Round , white with broad, stable edge and circumferential standing ring on the bottom. Food-safe product according to regulation (EU) No. 10/2011.

With ribbed base. Stackable.

Melamine resin. Base section is autoclavable (121°C).
Please order lid separately.

Stainless steel 18/10. Satin finish. With knob lid.

• To DIN 12341
• Ground edges
• Hydrolytical class 3

Remanit^® 4301. With edge rim.

White, melamine resin. Autoclavable (121°C)

• DIN 12336
• Flat-bottom with spout

With vertical side walls. Glazed, except for base exterior.

For multi purpose use. Durable and resist to bending, with strong rounded rim. Stackable for space solving solutions, polished surface for easy cleaning. Resistant to many acids and alkaline solutions. Food-safe.

To DIN 12907. Glazed inside and outside except for rim.

Cylindrical. With fitted stoppers.

With compartments. For use as drawer trays or bench tidy trays.

Cell culture multiwell plates are available in the hydrophilic surface (TC surface treatment) for improved cell adhesion and hydrophobic surface for suspension cultures and hybridoma cells. All panels can be stacked together, both with and without cover. The special design of the panels is also in stacked plates a faster heat exchange over the entire bottom surface of each plate allows . All plates have an imprinted lot number and are both pyrogens and DNase / RNase - free .

Properties:

• High clarity and low autofluorescence
• Lid enables optimal gas exchange with the lowest possible evaporation
• Single position lids to prevent cross-contamination
• Alphanumeric well coding
• Compatible with common instruments and automated systems
• Easy-to-open packaging

Temperature resistant from -30 up to max. 60 °C.

With rounded edges.

Ideal for covering PTFE beakers. Excellent chemical resistance.

Cell culture multiwell plates are available in the hydrophilic surface (TC surface treatment) for improved cell adhesion and hydrophobic surface for suspension cultures and hybridoma cells. All panels can be stacked together, both with and without cover. The special design of the panels is also in stacked plates a faster heat exchange over the entire bottom surface of each plate allows . All plates have an imprinted lot number and are both pyrogens and DNase / RNase - free .

Properties:

• High clarity and low autofluorescence
• Lid enables optimal gas exchange with the lowest possible evaporation
• Single position lids to prevent cross-contamination
• Alphanumeric well coding
• Compatible with common instruments and automated systems
• Easy-to-open packaging

• Complies to DIN 12337
• Manufactured from Pyrex^® borosilicate glass
• Suitable for use up to 400°C
• Chemically and thermally resistant

The highest possible degree of automation, optimal performance and cost savings continue to be the requirements placed on microplates for high-throughput screening. The footprint is compatible with automated systems. Polystyrene is a highly clear polymer with excellent optical properties which makes it ideal for precise optical measurements. The improved Rounded Square Well Design allows flexible working volume of 15 - 110 μl, with the advantages of a round well, such as reduced wicking and bubbling.

Properties:

• Well volume is 12.6 μl
• Working volume of 3 - 10 μl
• Curvature of the plates to < 100 μm
• Ideally suited for bottom reading even at low working volumes
• Suited for transmission, fluorescence and luminescence applications
• Excellent optical properties

384 Well Polystyrene Microplates are manufactured under DIN ISO 9001 guidelines and can be traced all the way back to production through a defined LOT number system. Furthermore they are footprint compatible with automated systems. Polystyrene is a highly clear polymer with excellent optical properties which makes it ideal for precise optical measurements. An it is suitable for work with cell cultures. The improved Rounded Square Well Design allows flexible working volume of 15 - 110 μl, with the advantages of a round well, such as reduced wicking and bubbling.

Properties:

• Total volume: 131 μl
• Working volume: 15 - 110 μl
• Growth area: 10 mm2
• Lid enables gas exchange with the lowest possible evaporation
• Stackable
• Alphanumeric well coding

We set high standards on the quality of our immunological products, especially on consistency and reproducibility of binding properties. The incoming raw material used for ELISA microplates is routinely monitored for identity and immunological quality. All ELISA are ideally suited for optical measurements. Two surface qualities offers for ELISA
microplates: the hydrophilic high binding products and the less hydrophilic medium binding products.

Proporties:

• Manufactured from crystal clear polystyrene
• Compatible with automated systems
• High-throughput manner
• Cost-effective
• Results rapid available

96 Well Polystyrene Microplates are manufactured under DIN ISO 9001 guidelines and can be traced all the way back to production through a defined LOT number system. Furthermore they are footprint compatible with automated systems. Polystyrene is a highly clear polymer with excellent optical properties which makes it ideal for precise optical measurements. An it is suitable for work with cell cultures.

Properties:

• Reduction of sample volume by up to 50 %
• Standardised pathlength (1 cm=170 μl, 0.5 cm=80 μl)
• medium binding microplate is more hydrophobic than the surface of a high binding microplate
• μClear® with ultra-thin films, without the use of adhesives or solvents
• Are analysed for detectable DNase, RNase and human DNA
• Are free of biocides and antistatics
• Are manufactured without the use of siliconbased mould release

Sterile trough-shaped reservoirs with pour-off spouts on all 4 corners. With graduations on inside wall.

18/10 steel. Cylindrical.

Microplates in strip format offer the advantage of greater flexibility in diagnostics. Individual strips can be removed from the support frame so that the number of tests to be performed can be adjusted to the number of samples, and is not predetermined by the microplate format used. In addition, the individual strips of a microplate can be subjected to a wide variety of different test conditions.

Proporties:

• Strips mounted in frame
• U-Bottom: no corners, therefore simple and clean pipetting
• F-Bottom: ideal for the most precise optical measurements

With vertical walls and polished rims.
With or without stainless steel lid. Dimensions stated are nominal.

Made of stainless steel for easy removal of paraffin inclusions: they allow a precise location of the specimen into the paraffin.

Cylindrical. With ground-in knob lid.

Temperature resistant from -30 up to max. 60 °C.

Temperature resistant from -30 up to max. 60 °C.

Temperature resistant from -30 up to max. 60 °C.

Disposable Reagent Reservoirs with a V-shaped bottom to ensure that all the reagent is accessible and can be easily aspirated. Thick wall construction and wide base adds stability and durability making the reservoir easy to handle without product deformation.

• Graduation markings allow for measurement of the liquid
• With pour-off spouts on all corners
• Stackable, with nesting system for easy separation
• Sterile versions are sealed in bags, electron beam sterilised and Dnase, Rnase and pyrogen-free
• Quality certificate available on request

White, PP. Multi-purpose trays. Injection-moulded. Durable and resist flexing, with strong, rounded rim. Stackable and hygienic. Polished surface is easy to clean. Resistant to many acids and alkaline solutions. Food Safe.

For clean storage of instruments, equipment, goods and precision parts.

PetriSlides can also be used instead of Petri dishes. An inner ring is located in the transparent cover to ensure that the membrane lies securely on it. Due to its transparency it allows microscopy even if the lid still rests on the PetriSlides. The storage of the PetriSlides is uncomplicated, either in the supplied carton or in slide boxes.

• DIN 12337
• Without spout
• Dishes with capacity of 100ml and above have labelling patch
• Glass Type I / neutral glass as per USP, EP and JP
• Autoclavable

Pour-spout design easily dispenses samples without flexing the dish.
Flat-bottom dishes are made from 12-mil thick polystyrene for better strength, stability, and handling

Cell culture multiwell plates are available in the hydrophilic surface (TC surface treatment) for improved cell adhesion and hydrophobic surface for suspension cultures and hybridoma cells. Cell culture microplates from the CELLSTAR® range are specifically treated. This treatment leads to polar groups such as carboxyl and hydroxyl groups , added to the plastic surface. These allow the growth of adherent cell lines. They are also suitable for automated systems and contain an alphanumeric well coding. They are also suitable for footprint systems and contain an alphanumeric well coding.

Properties:

• Lid enables gas exchange with the lowest possible evaporation
• High clarity of the clear microplates for optimal microscopic examinations
• Stackable
• Alphanumeric well coding
• Consecutive lot numbering
• 96 and 1536 well format available

French shape, with spout and flat base glazed inside and outside.

• DIN 12 341
• Fire-polished edges
• Stress-reduced to minimize risk of breakage

Tall form, Remanit 4301.

For fluorescence microscopy, phase contrast microscopy, confocal microscopy, live cell imaging, differential interference contrast microscopy, and fluorescence in situ hybridization (FISH). Nunc trays with glass bottom combine the advantages of standard 35 mm dishes with the imaging benefits of coverslips. The inner surface of the tray bottom, including the glass surface, is cell culture treated.

• Outer diameter 35 mm
• Workload 3,0 ml
• Height 12,9 mm

HACCP conform cutting board.

• Suitable for dish washer
• Heat resistant up to 90 °C

With rounded corners.

With lid. Lid with internal handle, stackable.

18/10 stainless steel. For boiling and simple water bath applications. With side handles and lid.

Fully compatible to all current standard-equipments (reading and washing devices). Safe stacking, no danger of slipping. Appropriate gripping surfaces at the side. Frosted surface of the plates prevents errors from extraneous light. Alpha-numerical well identification for easy sample location. Space for identification marking on the side surface. Covers with condensation-rings to avoid medium-losses and uneven evaporation. Lid orientation corners reduce risk of cross-contaminations.

U-Well: No edges, therefore simple and clean to pipette into, for +/- evaluations, especially suitable for agglutination-tests.
V-Well: Especially good for releasing the "last drop" from the pipette, for +/- evaluations, suitable for storage of samples.
F-Well: For precise optical measurements, for microscopic applications (Bottom Reading), rims at the bases prevent a scuffing of the optical surface, widened cell-growth-surface.

Milliflex® cassettes for the pharmaceutical and cosmetics industry. As a liquid or agar culture medium, it is the product of choice for convenient, fast and reliable bioburden testing. A wide range of ready-to-use, pre-filled cassettes is available.
These are manufactured and QC tested according to the requirements of the pharmaceutical industry.