Air sampling and analysis

In many fields, such as mining or industry, it is very important to detect even the smallest air flows, in order to quickly and reliably evaluate the possible diffusion of dangerous substances. With the air flow test tubes, the source, direction and speed of the air flow are visible immediately.

AirPort MD8 is a new portable air bacteria sampler for the pharmaceutical and food and beverage industries, hospitals, environmental protection and for industrial safety. AirPort MD8 has the following benefits:

• Battery-powered and portable for lab or field use
• Battery status display guarantees constant performance during sampling
• Ergonomic, smooth design, surfaces can be disinfected
• Choice of sampling selection, either by total volume or measurement duration

Specifications:
Volume flow control:	Volume flow can be set to three levels using integral hydrometric manometer: 30 L/min., 40 L/min. and 50 L/min.
Fixed sample volumes:	25, 50, 100, 250, 500, 750 and 1000 litres Sample volume can also be adjusted in 5 litre increments
Battery:	NiMH 16.8 Volt/3800 mAh
Running time with a full battery charge:	approx. 4.5 hours
Charging time:	approx. 4.5 hours if battery flat
Noise level:	Using gelatin membrane filters, 48 dB(A)
Weight: Dimensions (L x W x H): Filter size:	2.5 kg 300 x 135 x 165 mm 80 mm dia., area 38.5 cm²

Accessories Disposable gelatin units for air sampler Airport MD8

The Dräger Aerotest Alpha allows the quality of breathing air supplied by a compressor or compressed gas cylinder to be determined. Use of the test system performs a reliable check in accordance with the breathing air standard EN 12 021.

Dräger Aerotest Alpha
comprising of 1 pressure reducer, measuring device for 4 tubes, impactor adapter, coupling, barbed nipple, stopwatch, tube opener Dräger TO 7000, bubble test hose, pack of 5 sintered filters, instruction for use, transport case (black)

Dräger Aerotest Alpha, with Dräger Tubes :
Dräger Aerotest Alpha
+ box of 10 Dräger Oil Impactors,
+ box of 10 Dräger-Tubes carbon dioxide (CO₂) 100/a-P,
+ box of 10 Dräger-Tubes carbon monoxide (CO) 5/a-P,
+ box of 10 Dräger-Tubes water vapor (H₂O) 20/a-P

Specifications
Dimensions of carrying case (L x W x H)	350 x 300 x 85 mm
Weight, including contents	approx. 3.0 kg
Max. supply pressure Supply pressure (set on delivery)	15 bar 3.0 bar
Pressure gauge	0.3 to 15 bar
Connection for compressed air supply	barbed nipple 9 mm
Flow rate	0.2 and 4.0 l/min

Using the Dräger activated charcoal tubes or silica gel tubes, hazardous substances in the air are collected using a suitable medium via adsorption or chemisorption. The sample is then analysed in the laboratory by means of various analytical methods such as gas chromatography (GC), high performance liquid chromatography (HPLC), UV-VIS photometry, or IR spectroscopy.

Fast measurement with one hand: The Dräger-Tube pump accuro^® allows you to use the established Dräger-Tubes^® to take measurements under extreme conditions. The easy-to-use Dräger-Tubes have already been calibrated and form a perfect unit with the Dräger-Tube pump.

Gas pump Dräger accuro^® set consisting of:
Dräger-Tubes^® pump accuro^®, ready bag, with tube opener and spare part set

The Dräger-Tubes^® measuring system is the safe method for measuring pollutants in the soil, water and air. More than 500 substances can be measured in varying concentrations. The long-established principle of Dräger-Tubes^® is still the same. A defined volume of gas/air must be pumped through the sampling tube. This can be achieved by using the Accuro^® gas pump. On contact with the substance under test the reagent system contained in the tube reacts and displays a colour. The strength of the concentration of the substance is shown by the length of the colour band displayed and can be read directly from the scale. The Dräger-Tubes^® sampling system provides accuracy, efficiency, quick and easy handling. Over 250 tubes are available on request for all substances and measuring fields. Further sampling devices, diffusion tubes for long-term measurements as well as sampling systems with activated carbon tubes, ORSA collector and TDS thermodesorption tubes are also available.

Alternative Dräger-Tubes® Alternative Dräger-Tubes ®

The Dräger-Tubes^® measuring system is the safe method for measuring pollutants in the soil, water and air. More than 500 substances can be measured in varying concentrations. The long-established principle of Dräger-Tubes^® is still the same. A defined volume of gas/air must be pumped through the sampling tube. This can be achieved by using the Accuro^® gas pump. On contact with the substance under test the reagent system contained in the tube reacts and displays a colour. The strength of the concentration of the substance is shown by the length of the colour band displayed and can be read directly from the scale. The Dräger-Tubes^® sampling system provides accuracy, efficiency, quick and easy handling. Over 250 tubes are available on request for all substances and measuring fields. Further sampling devices, diffusion tubes for long-term measurements as well as sampling systems with activated carbon tubes, ORSA collector and TDS thermodesorption tubes are also available.

Alternative Dräger-Tubes® Alternative Dräger-Tubes ®

The Dräger-Tubes^® measuring system is the safe method for measuring pollutants in the soil, water and air. More than 500 substances can be measured in varying concentrations. The long-established principle of Dräger-Tubes^® is still the same. A defined volume of gas/air must be pumped through the sampling tube. This can be achieved by using the Accuro^® gas pump. On contact with the substance under test the reagent system contained in the tube reacts and displays a colour. The strength of the concentration of the substance is shown by the length of the colour band displayed and can be read directly from the scale. The Dräger-Tubes^® sampling system provides accuracy, efficiency, quick and easy handling. Over 250 tubes are available on request for all substances and measuring fields. Further sampling devices, diffusion tubes for long-term measurements as well as sampling systems with activated carbon tubes, ORSA collector and TDS thermodesorption tubes are also available.

Alternative Dräger-Tubes® Alternative Dräger-Tubes®

Gas analyzers MAT1000 series are used for measuring oxygen concentrations (O₂) or optional carbon dioxide concentrations (CO₂).
Applies to all models of MAT1000 series:

• Easy and intuitive operation via touchscreen, even by untrained personnel
• Create your own method
• Available method parameters: scales, measurement procedures, limit values, comment and much more
• Selectable measurement methods: single or continuous
• Several single measurement procedures: manual, automatic, min/max detection
• Shortcut keys for most important functions
• Short measurement period, high accuracy even with small sample volume
• Validation possible
• Compliance with global standards such as GMP/GLP and 21 CFR Part 11
• Documentation of all measured values of the last 999 measurements
• Integrated interfaces, flexible data export (USB, Ethernet, RS-232)
• Compact design in robust cast aluminum housing
• Built-in air pressure sensor
• Integrated flow rate monitoring

Gas analysers for controlling protective gas packaging. The MAT1100 equipped with an electrochemical oxygen cell measures the oxygen concentration within the range of 0.5 and 35 vol% and with an accuracy of ±0.2 vol%. The MAT1200 additionally features a non-dispersive infrared sensor for measuring carbon dioxide within the range of 0 and 50 vol% and with a high accuracy of ±0.5 vol%. Both devices are suitable for the random sampling as well as the permanent monitoring of the gas mixture used on packaging machines. Their solid metal housing with an interchangeable protective cover offers protection against impact and dirt from the outside.

Measurement of O₂ and CO₂ e.g. in modified atmosphere packaging, for work with modified atmosphere conditions.

• Sporadic O₂ sample checks
• Quick Operation
• Low-drift electrochemical oxygen cell (EC)
• Low-drift carbon non-dispersive infrared sensor (NDIR), model MAT1200
• Combined O₂ and CO₂ measurement, model MAT1200
• Environmental compensated CO₂ measurement, model MAT1200

Specifications
O2 measuring range: Accuracy: Resolution:	0.5 to 35 Vol.-% ±0.2 Vol.-% 0.1 Vol.-%
CO2 measuring range (only MAT1200): Accuracy: Resolution:	0 to 50 Vol.-% ±0.5 Vol.-% 0.11 Vol.-%
Average measurment period: Heating time MAT 1100 / MAT1200:	7 to 10 sec <10 sec / 5 min
Interface:	RS-232, USB, Ethernet
Dimensions (W x D x H):	200 x 350 x 150 mm
Weight:	4.6 kg
Power consumption:	60 W
Power supply:	100-250 V, 50/60 Hz

Made from 5 mil (125 µm) FEP fluoropolymer film, these flexible, sturdy bags are heat sealed on all four sides for complete chemical resistance and leak-proof operation. They are inert to most chemicals and have low permeability which limits sample loss. These FEP bags are easy to use. They can be stored for an unlimited period prior to use. Applications include gas sample analysis, extracting air samples from smokestack exhaust systems, monitoring air quality or calibrating instruments in the field. The bags are individually packaged.

• Chemically resistant
• Flexible
• Will not contaminate sample

With a nickel-plated, brass on/off valve that accepts 6.4 mm I.D. flexible tubing.

Made from 5 mil (125 µm) FEP fluoropolymer film, these flexible, sturdy bags are heat sealed on all four sides for complete chemical resistance and leak-proof operation. They are inert to most chemicals and have low permeability which limits sample loss. These FEP bags are easy to use. They can be stored for an unlimited period prior to use. Applications include gas sample analysis, extracting air samples from smokestack exhaust systems, monitoring air quality or calibrating instruments in the field. The bags are individually packaged.

• Chemically resistant
• Flexible
• Will not contaminate sample

With PTFE/silicone septum in polypropylene housing for use with a hypodermic needle.

Reusable bags made of 2 mil (50 µm) PVDF fluoropolymer film, Chemware^® Gas Bags offer an economical alternative for analysis of noncorrosive gases. Durable, heat-sealed seams ensure leak-proof operation. Applications include sampling carbon monoxide, sulfur dioxide, hydrogen sulfide, radon and mercaptan. The bags are individually packaged. When used for liquid samples, bags should be supported with a tray. Custom sizes and configurations available on request.

• Flexible
• Will not contaminate sample
• For use in gas sampling trains
• Use for gas or liquid sample containment

With a nickel-plated, brass on/off valve that accepts 6.4 mm I.D. flexible tubing.

Reusable bags made of 2 mil (50 µm) PVDF fluoropolymer film, Chemware^® Gas Bags offer an economical alternative for analysis of noncorrosive gases. Durable, heat-sealed seams ensure leak-proof operation. Applications include sampling carbon monoxide, sulfur dioxide, hydrogen sulfide, radon and mercaptan. The bags are individually packaged. When used for liquid samples, bags should be supported with a tray. Custom sizes and configurations available on request.

• Flexible
• Will not contaminate sample
• For use in gas sampling trains
• Use for gas or liquid sample containment

With a PTFE/silicone septum in a polypropylene housing for use with a hypodermic needle.

Accessories Turbidity meters Turb® 430

This device is the innovative solution for the simultaneous and continuous detection of up to five gases. A combination of more than 25 sensors allows flexible solutions to individual monitoring tasks. The device can be equipped with three electrochemical, and two catalytic bead, infrared or photoionisation sensors. It is the ideal companion in a great number of applications where reliable monitoring of oxygen, toxic and combustible gases and vapors in ambient air is necessary.

Basic unit with rubber-boot, carrying strap, calibration adapter, water and dust filter. In order to get a fully operational unit, a power pack and up to 5 sensors have to be ordered. And, optionally, a built-in pump or a datalogger can be ordered.

Specifications
Temperature: Pressure: Humidity:	-20 ... +55 °C, short-term -40 ... +60 °C 700 ... 1300 hPa 10 ... 95 % r.F.
Alarms (visual/audible):	360° flashing LEDs / >100 dB(A) at 30 cm
Charging time:	3.5 to 7 hours, depending on battery type
Pump mode:	maximum hose length of 45 m
Dimensions (W x H x D):	150 x 140 x 75 mm
Weight (basic unit/battery):	600 g / 490 g (3,0 Ah), 730 g (6,0 Ah)
Ingress protection:	IP 67
Approvals:	ATEX, MED, CSA, IECEx

Alternative Gerald micro forceps, stainless steel

Gas analyzers MAT1000 series are used for measuring oxygen concentrations (O₂) or optional carbon dioxide concentrations (CO₂).
Applies to all models of MAT1000 series:

• Easy and intuitive operation via touchscreen, even by untrained personnel
• Create your own method
• Available method parameters: scales, measurement procedures, limit values, comment and much more
• Selectable measurement methods: single or continuous
• Several single measurement procedures: manual, automatic, min/max detection
• Shortcut keys for most important functions
• Short measurement period, high accuracy even with small sample volume
• Validation possible
• Compliance with global standards such as GMP/GLP and 21 CFR Part 11
• Documentation of all measured values of the last 999 measurements
• Integrated interfaces, flexible data export (USB, Ethernet, RS-232)
• Compact design in robust cast aluminum housing
• Built-in air pressure sensor
• Integrated flow rate monitoring

Gas analysers for controlling protective gas packaging. The MAT1400 equipped with a zirconium dioxide sensor (ZrO₂) measures the oxygen concentration over the entire measurement range between 0 and 100 vol% and with an excellent accuracy of ±0.001 vol%. The MAT1500 additionally features a non-dispersive infrared sensor for measuring carbon dioxide within the range of 0 and 50 vol% and with a high accuracy of ±0.5 vol%. Both devices are suitable for the random sampling as well as the permanent monitoring of the gas mixture used on packaging machines. Their solid metal housing with an interchangeable protective cover offers protection against impact and dirt from the outside.

Measurement of O₂ and CO₂ e.g. in modified atmosphere packaging, for work with modified atmosphere conditions.

• For high sample throughput
• For high O₂ concentration
• High precision with the lowest O₂ concentrations
• Wide measurement range
• Drift-free zirconia sensor (ZrO₂)
• Low-drift non-dispersive infrared sensor (NDIR), model MAT1500
• Environmental compensated CO₂ measurement, model MAT1500

Specifications
O2 measuring range:	0 to 100 Vol.-%
Accuracy:	0.001 Vol.-% (<1 Vol.-%) 0.1 Vol.-% (<6 Vol.-%) 0.1 Vol.-% (<35 Vol.-%)
Resolution: CO2 measuring range (only MAT1500):	0.001 Vol.-% 0 to 50 Vol.-%
Accuracy: Resolution:	±0.5 Vol.-% 0.1 Vol.-%
Average measurement period: Heating time:	5 to 10 sec 10 min
Interface:	RS-232, USB, Ethernet
Dimensions (W x D x H):	200 x 350 x 150 mm
Weight:	4.6 kg
Power consumption:	60 W
Power supply:	100-250 V, 50/60 Hz

Digital probes with intelligent calibration concept. All probe heads can be easily attached to the universal handle.

Accessories Probe heads

Pollution monitors for collecting gases and vapours in the ambient atmosphere. Ideal for detecting pollutant concentration in the workplace. The 3M™ Pollution monitor is equipped with a single charcoal adsorbent wafer that binds pollutants in the air by means of diffusion.

• Suitable for personal and area monitoring
• Easy to use: the pollution monitor can simply be clipped onto clothing
• Small and lightweight

Portable gas monitors to detect gases in the surrounding atmosphere. They measure concentrations of toxic gases and oxygen in the atmosphere and issue an alarm when gas concentrations reach preset levels. The alarms are indicated by flashing lamp, intermittent audible buzzer, flashing gas concentration readout and vibration.

• LCD display
• R-sensor and CO-sensor with H₂-reduction
• Robust construction
• Water- and dust-proof
• Battery or rechargeable battery operation

Specifications
Gas alarm:	STEL Alarm, TWA Alarm, Over
Alarm volume:	80 db
Humidity:	0 ... 95 % RH (OX-04G: 10 ... 90 % RH)
Detection principle:	Electrochemical type (OX-04G: galvanic cell type)
Dimensions (W x D x H):	54 x 24 x 67 mm
Weight:	93 g
Power supply:	2 x AAA alkaline batteries, or 2 x AAA rechargeble batteries (Ni-MH)
Protection class:	IP 66/67
Warranty (sensor):	3 years (OX-04G: 1 year)