Funnels

LABSOLUTE® short-stem funnels are made of high-quality borosilicate glass 3.3. They can also be used to decant and filter hot liquids. LABSOLUTE® funnels with diameter from 35 - 150 mm fit to almost every application. All funnels are manufactured on the basis of ISO 4798.

LABSOLUTE® funnels made of transparent PP are autoclavable at 121 °C. Compared to glass funnels, the shatterproof PP funnels are a good and cheap alternative for almost every filtration of low-viscosity liquids. Standard filter paper fits into the funnels. Ribs on the inside ensure fast filtration. Ribs on the outside avoid air bubbles between the filter paper and the funnel's surface.

LABSOLUTE® powder funnels made of transparent PP are unbreakable and very economic. They can be autoclaved at 121 °C. The funnels are suitable to transfer powders, granulated materials and highly viscous liquids. The parallel stem prevents blockage in the funnel. There are also ribs on the inside for fast filtration and ribs on the outside to prevent air blockage.

LABSOLUTE® funnel holders made of PP are suitable for funnels with a diameter from 25 up to 150 mm. Without adapter they can be used for powder funnels with stem diameters not exceeding 35 mm. A clamp adapter is provided for use with rods from 8 to 12 mm.

With short stem. With a cone angle of 60° offers an optimum fit for all filter sizes. Ideal for easy filling of laboratory bottles and filtration of liquids. High temperature and chemical resistance.

Made of transparent polypropylene. Ideal for easy filling of laboratory bottles and filtration of liquids.

• Good temperature and chemical resistance
• Autoclavable at 121 °C and 1.1 bar for 30 minutes

Clear, virgin polypropylene, autoclavable at 121°C and 1.1 bar for 30 minutes.
The external ribs prevent airlock and back pressure. The internal helicoidal rib prevents filter papers from sticking and increases filtration speed.

These funnel holders are suitable to hold all types of funnels with a diameter up to 150mm. They can also accommodate separating funnels (up to 1000ml). With or without bosshead.

Manufactured from best quality polypropylene. Suitable to hold all types of laboratory funnels with diameters up to 150mm. Two tapered wedges are provided to ensure firm grip on rods having diameters of 10-13mm.

DIN ISO 4798. With short stem. Glass Type I / neutral glass as per USP, EP and JP. Autoclavable.

Transparent. Rapid flow due to a steep 60° angle. Practical handle with loop for hanging. Food-safe product according to regulation (EU) No. 10/2011.

Transparent. For transfer of powdered and granular substances.

• Rapid flow due to a steep 60° angle
• Autoclavable

With short, wide stem.

Nature colours. Food safe. 9.073 470 with stainless steel mesh, 50 mm dia.

Transparent. Rapid flow due to a steep 60° angle. Practical handle for hanging. Suitable for filling large amounts of liquids. Food-safe products according to regulation (EU) No. 10/2011.

Sieve for 9251 640 and 9251 645 available (not approved as a food-safe article). Please order separately.

Transparent. For multi-neck flasks, laterally flattened, suitable for standard joint necks of various sizes. Suitable for the filling of liquid or powdered reagents into a reaction flask, partyicularly multi-neck flasks, during a reaction. Food-safe product according to regulation (EU) No. 10/2011.

With short stem and NS cone.

Adjustable height 140 to 230 mm. Inner diameter upper ring: 45 mm. Outer diameter bottom ring: 126 mm.

Single or double holder for funnels from 25mm (with adapter supplied) up to 170mm diameter. Without adapter they can be used for powder funnels with stem diameters not exceeding 35mm. Two clamp adapters are provided for use with rods from 8mm to 14mm.

With filling vent and handle.

White, unbreakable, chemically resistant.
For 2 or 4 funnels. Robust, heavy base provides good stability. Variable height adjustment up to 450 mm. Thanks to a magnet system, no clamping screws are necessary. The height of the funnel holder can be adjusted easily and flexibly with one hand.

With 2 or 4 aperture reduction inserts for small funnels. Suitable for funnels with diam. 40 to 180 mm.

Glass-clear. For high-speed filtration. The internal helicoid ribs to increase the filtration speed.

• Polymethylpentene plastic
• Vertical outer ribs prevent airlock
• Autoclavable
• Unaffected by corrosive liquids
• Heat resistant to 177 ºC

Solid addition funnels (angle: 60°), with NS cone, made of DURAN^® tubing.

For 9.251 640 and 9.251 645.

To DIN 12905.

Supplied flat-pack to minimize storage space and keep it clean. A more environmentally friendly paper product that will naturally biodegrade in the standard waste stream. Fits a wide variety of openings and can be used with virtually any liquid or powder. Cut the stem to any size or shape to meet with your needs.

For rapid filtration. Glass Type I / neutral glass as per USP, EP and JP. Autoclavable.

PP holder mounted on a stand with 12.7 x 595 mm aluminium rod and heavy cast base plate.
Choice of stands to hold 2 or 4 funnels with a top diameter of 50 to 120 mm. The holder height is adjustable.

The stand for sedimentation funnels is used to keep, hold or store Imhoff funnels safely and reliably during sedimentation. Two funnel holders ensure that Imhoff funnels will be held safely and securely and can be placed in an absolutely vertical position. Stand with two holders for sedimentation funnels, suitable for funnels 90 mm or more in diameter. Thanks to an innovative magnet concept no clamping screws are necessary. The height of the funnel holder can be adjusted easily and flexibly with one hand. With the corresponding accessory the holders for Imhoff funnels can also be replaced by holders for all-purpose funnels.

• PP, chrome-plated steel
• Adjustable height up to 450 mm
• For funnels with Ø 90 mm or more

The sterile plastic funnels with 47 mm diameter allow quick performance of the filtrations required in the routine testing of water, food and beverages, pharmaceutical and cosmetic products. A Sartorius Stedim Biotech gridded membrane is placed on a stainless steel filter support and a Microsart^® Funnel is simply and practically fitted on and the sample is filtered by vacuum.

• Click-Fit closure for optimum sealing
• Graduation with markings for exact volume dosing

Dispensing funnel for powdered substances. With cone NS 29/32, NS 29/32 socket, NS 14,5/23 side socket.

Cylindrical shape. With interchangeable PE stopper and stopcock with key as indicated, incl. retaining device.
Graduated for reading the approx. volume.
Two types are available:

• With solid glass key stopcock
• With PTFE key stopcock

This filter funnel, which is designed for normal and low pressure, is made of PTFE and PFA, making it resistant to almost all chemicals. It does not leave any trace elements in the medium to be filtered. The vacuum connection is a multi-stepped tubing ferrule with sealing screw, adjustable to suit the most common vacuum tubing bores (6 and 8 mm). The NS 29/32 socket provides a perfectly tight seal onto a similarly socketed, round-bottom flask made of PTFE, PFA or glass (please note vacuum compatibility). Supplied without membrane filter. Suitable for 47 mm diameter membranes, filter area 13.8 cm², sample funnel volume: 125 ml.

Rubber Spacers, made of natural rubber (NR). Conical, to fit filter funnels or crucibles into suction flasks. Durometer 40 Shore A

Straight tube outlet.

Borosilicate glass with acrylic support plate for filter paper. Can be dismantled quickly for cleaning. Dimension given is the filter paper size required.

• funnel volume 60 ml
• for filter 25 mm diameter

Funnels with smooth surfaces and short stem. 60° angle. DIN 12445.

With short, wide stem.

• For rapid filtration
• Angled at 60°
• External ribs allow air to escape during filtration
• With short, wide stem

Suitable to hold all types of laboratory funnels and also separatory funnels with diameter from 60 up to 150 mm. Two tapered wedges are provided to ensure firm grip.

With suspension eyelet. Tough, robust, general purpose funnels suitable for a wide range of liquids. Upstand on rim to reduce possible overflow. Ribbed on outside to eliminate back pressure.

Diameter refers to the filter plates.

Designed specifically for analytical chemistry. Each size takes a standard size filter paper. Body of funnel is exactly 60° angle. Provided with external and internal ribs. Autoclavable. Food-safe.

Low form, circular base. Excellent chemical resistance. Moulded graduation. Wide base for high stability. Food-safe, autoclavable.

To pour and transfer free-flowing powders, liquids and slightly viscous media.

• Air channel for unobstructed flow
• Larger versions with handle
• Autoclavable
• Suitable for food

This compact funnel with lid is optimally suited for restricted space conditions in the laboratory. The hinged lid closes the funnel clean and safely. The removable sieve collects magnetic stirrers and solid substances during fluid discharge.

• Chemically resistant HDPE
• With removable sieve for easy cleaning
• Different thread sizes with free rotatable cap
• Safety lance ensures clean outflow without contaminating the container opening
• Lance length: 200 mm
• Also available without safety lance
• Chromatography vials can be disposed completely when the sieve is removed
• Black Safety funnels are made of electrostatic conductive HDPE and have a grounding connection to avoid ignition risks. Grounding cable (1.5 m) and grounding clamp are included

• Funnel diameter: 140 mm

With short stem and 60 degree angle.

Transparent. For transfer of powdered substances.

• Angled at 60°
• Ground and fire-polished upper rim
• Short stem

For microbiological quality control. Quick connectors at both sides of the manifolds enable fast connections of either tubing, another manifold or end caps. Various funnel and filtration units are available.

• Full autoclavability without disassembly
• Sterile venting
• Reduced risk of secondary contamination
• Low working height
• Rubber feets providing better stability at the workplace

With suspension eyelet, transparent.

Single-use filterware. Analytical filterware provides precise, easy-to-use systems for the recovery of microorganisms and particulates for QC testing and research.

• Disposable, easy-to-use, pre-assembled sterile filter units and funnels
• Easy-to-remove triton-free cellulose nitrate (CN) membranes
• 0.2 µm CN membrane is suitable for sterility testing
• 0.45 µm CN gridded membrane is certified for water quality testing

With long handle and outer ribs, for use with standard filter paper. The funnel body has an angle of 60° with internal 58° inclined ribs for fast filtration.

• Autoclavable
• Break-proof
• Chemical resistant

Chemically resistant and temperature resistant from -200 to 250 °C. FDA conform. Autoclavable.

All purpose containers suitable for the S.C.A.T. Safety System. With screw cap.

Thick body with reinforced rim. Incl. an acid resistant sintered glass disc.

Angle of 60°, sloping stem.

Plain funnels with short stem (angle: 60°).

• For rapid filtration
• Angled at 60°
• Ground and fire-polished upper rim
• Short stem

The funnels with hinged lid and sealing ring are screwed down onto the desktop or rear panels of fume cupboards, and connected to the SymLine^® system. This ensures that all waste liquids flow safely into the collection container.

• Grounding connector with cable and clamp
• Sieve removable for cleaning
• GL 45 (w) thread
• Funnel diameter: 140 mm

This compact funnel with lid is optimally suited for restricted space conditions in the laboratory. The hinged lid closes the funnel clean and safely. The removable sieve collects magnetic stirrers and solid substances during fluid discharge.

• Chemically resistant HDPE
• With removable sieve for easy cleaning
• Different thread sizes with free rotatable cap
• Safety lance ensures clean outflow without contaminating the container opening
• Lance length: 200 mm
• Also available without safety lance
• Chromatography vials can be disposed completely when the sieve is removed
• Black Safety funnels are made of electrostatic conductive HDPE and have a grounding connection to avoid ignition risks. Grounding cable (1.5 m) and grounding clamp are included

• Funnel diameter: 140 mm

The level control responds from 8 l to 8.5 l and has a filling buffer of 1.5 l when using a 10 l canister.

• Hinged Lid with sealing ring and click-closure
• S60/61 thread with freely rotatable closure
• Drip edge prevents from fluid deposition at the closure

• Ground and fire-polished upper rim
• With short, wide stem

For safe filling of plastic canisters. With overfill protection, liquid level control, flame trap, earthing und cap. Filter to extract solid matter. From high quality and chemically resistant stainless steel, screw cap from PE.
Upon request: available in flat design (height above thread: 70 mm), with thread G2"" or with 2""-buttress thread (S56x4).