portable pH meters

The LLG-pH meter 5 is a very easy to use pH/mV/°C handheld meter. The pH value and temperature can be stored directly on the SD card (Excel file) or transferred directly from the pH meter to a PC via the RS-232 interface.

• Gel filled pH electrode with external temperature sensor with 1 m cable
• BNC connector
• Automatic temperature compensation (ATC)
• Large, easy-to-read LCD display
• 3 point calibration
• Suitable for all standard SD cards with up to 16 GB

Please order batteries separately (6 x 1,5 V AA)
Optional: power cable, PC connection cable, PC software

Scope of supply: pH meter, pH electrode with temperature sensor, buffers pH 4 and pH 7, 4 GB SD-Memory card, transport case

The safety data sheets of these products are available under www.llg-labware.com.

Specifications
Measuring range pH:	0 ... 14
pH resolution:	0.01
pH accuracy:	±0.02 + 2d
Ambient conditions:	0 ... 50 °C, max. 85 % r.H.
Temperature range electrode:	0 ... 60 °C
Dimensions (W x D x H):	68 x 177 x 45 mm
Weight:	490 g
Power supply:	6 x 1.5 V AA batteries / 9 V mains adapter (optional)
IP code:	IP 51
Warranty:	3 years (1 year on the electrode)

Accessories Accessories for LLG-pH meter 5 Alternative pH Tester LLG-pH Pen

All pipettes are supplied with a filter for protection against the suction of liquid into the pipetting device. Lot number and expiry date is on each bag noted. By using a high-grade polystyrene a maximum clarity is guaranteed. Increased volume of pipettes is a negative graduations. Pipette colour code according to international standards. Short-format pipettes (shorties) permit back-saving work.

Properties:

• Non-cytotoxic and free of detectable DNase, RNase and human DNA and endotoxins
• Sterile
• High optical clarity
• Maximum accuracy
• Drop-free pipetting
• Clear, easily legible graduation
• 5/10/25 ml pipettes with vertical Schellbach stripe for easier volume identification

For the SensoLyt^® armature, for the installation in a flow vessel or in a replacement fitting

• For drinking water, wastewater or in the process
• Also for high pressure and temperature conditions
• Easy to maintain by easy measuring chain replacement

FiveEasy™ and FiveEasy™ Plus benchtop meters provide high quality pH/mV measurements with the simple click of a button.

• Large, easy to read and easy to understand display with all information visible at a glance
• Five self-explanatory buttons making operation simple and easy
• Fast and easy connectivity for simple and secure data transfer (FP only)
• Electrode arm extension pole included

Scope of supply:
F20-Meter: Meter with CD operating instructions, QuickGuide, declaration of conformity, test certificate, power supply
F20-Standard: as F20-Meter, plus plastic LE438 3-in-1 pH electrode, 1 each x 4.01 pH, 7.00 pH, 9.21 pH buffer sachets
FP20-Meter: Meter with CD operating instructions, QuickGuide, declaration of conformity, test certificate, power supply
FP20-Standard: as FP20-Meter, plus plastic LE438 3-in-1 pH electrode, 1 each x 4.01 pH, 7.00 pH, 9.21 pH buffer sachets
FP20-Bio: as FP20-Meter, plus glass LE410 3-in-1 pH electrode, 1 each x 4.01 pH, 7.00 pH, 9.21 pH buffer sachets
FP20-Micro: as FP20-Meter, plus glass LE422 micro pH electrode, 1 each x 4.01 pH, 7.00 pH, 9.21 pH buffer sachets
FP20-TRIS: as FP20-Meter, plus glass LE420 pH electrode with moveable sleeve diaphragm, 1 each x 4.01 pH, 7.00 pH, 9.21 pH buffer sachets

Specifications
Measuring range (Accuracy)
pH F20 / FP20:	0.00 ... 14.00pH / -2.00 ... 16.00pH (±0.01pH)
mV:	-2000 ... 2000mV (±1mV)
Temperature F20 / FP20:	0 ... 100°C (0.5°C) / -5 ... 105°C (0.3°C)
Input:	BNC, Cinch (NTC 30kΩ)
Temperature compensation:	ATC and MTC
Power supply:	100 ... 240V / 50 ... 60Hz / 12V DC
Calibration F20:	3 points, linear, 4 predefined buffer groups
Calibration FP20:	5 points, linear/segmented, 4 predefined buffer groups
FP20 only
Memory:	200 measurements
Interface:	RS232, USB, Reference input

Simultaneously measure pH and temperature with a pocket sized tester designed to provide accurate measurements on the go for a variety of applications.

• Large 4 digit double line display
• Display of battery life, status and recalibration
• Automatic temperature compensation (ATC)
• Automatic buffer recognition and calibration
• Auto-power-off

Specifications
pH range: Resolution: Accuracy:	0 ... 14 0.1 ±0.1
pH calibration points:	1 ... 3 points
Temperature range:	0 ... 50 °C
Resolution:	0.1 °C
Accuracy:	±0.5 °C + 1 digit
Operating temperature:	5 ... 45 °C
Dimensions (W x L x H):	43 x 170 x 30 mm
Weight:	90 g
Power supply:	Incl. 4 batteries (A76 or LR44 equivalent)
IP code:	IP 67
Warranty:	1 year

Accessories LLG-pH buffer solutions

The WTW ProfiLine, hand-held, pH/mV meters are robust and waterproof, according to IP67. They have LCD or graphics displays. The proven DIN socket for connecting pH electrodes permits pH measurement even in wet environments. The instruments can be operated by standard alkaline or rechargeable batteries.
Make testing of pH and redox potential simple. Easy operation virtually eliminates errors. All function keys of the 3110 can be operated even when wearing gloves; automatic calibration and AutoRead functions ensure stable and reproducible results. The multifunctional display for pH, mV and temperature is always easy to read.

Measuring ranges
pH:	-2.0 ... 20.0 -2.00 ... 20.0 -2.000 ... 19.999
Accuracy:	± 0.01 (± 1 digit) ± 0.005 (15 °C ... 35 °C)
mV / Accuracy:	± 1200.0 / ± 0.3 ± 2000 / ± 1
Temperature:	-5.0 °C ... 105.0 °C
Accuracy:	± 0.1 °C
Temperature compensation:	Automatic via pH electrodes with integral temperature probe, TFK 325 or Pt1000

Accessories Protective armouring SM Pro, for ProfiLine handheld meters Accessories pH combination electrode, gel electrolyte, SenTix® Accessories pH combination electrodes, liquid electrolyte, SenTix®, refillable Alternative pH meter pH 3310 ProfiLine

The AL10pH is a portable, battery operated pH meter. The instrument is equipped as standard with protective casing and built-in electrode holder. It is equipped with a LC display showing two decimal places. The gel electrode of the AL10pH is temperature resistant over the range -5 to 80 °C. It is fitted with a BNC connector as standard.

Scope of supply: pH meter AL10pH, battery, pH-buffer (4.0 / 7.0), pH plastic electrode Type 226, in case.

Specifications
Measuring range:	0 to 14 pH
Resolution:	0.01 pH
Amb. temperature:	0 to 50 °C
Rel. humidity:	0 to 80 % (non condensing)
IP code: Battery:	IP 51 9 V-Block
Dimensions (L x W x H):	208 x 110 x 34 mm
Weight:	approx. 380 g

Convenient and versatile pH/mV meter with backlit graphics display and menu controlled operation. Waterproof and robust. With 5 point calibration for WTW technical or DIN/NIST buffers. Additional 20 pre-programmed buffer sets. The CMC function (Continuous Measurement Control) helps maintain the optimum measuring range and warns when limits are exceeded. The pH/mV handheld meter with integral, time controlled, data logger and memory for 5000 GLP compliant records is ideal for extended data collection. With 1 to 5-point pH calibration. Menu controlled, with backlit graphics display for comfortable and safe operation. 100% waterproof, USB interface for fast data transfer. Includes driver software and cable.

Measuring ranges
pH:	-2.0 ... 20.0 -2.00 ... 20.00 -2.000 ... 19.999
Accuracy:	± 0.005 (15 °C ... 35 °C)
mV / Accuracy:	± 1200,0 / ± 0.3 mV ± 2500 / ± 1 mV
Temperature:	-5.0 °C ... 105 °C
Accuracy:	± 0.1 °C
Interface:	Mini USB-B
Memory:	5000 records (measured value, temperature, date, time, ID)

Accessories Protective armouring SM Pro, for ProfiLine handheld meters Accessories pH combination electrode, gel electrolyte, SenTix® Accessories pH combination electrodes, liquid electrolyte, SenTix®, refillable Alternative pH and redox meter pH 3110 ProfiLine

Waterproof, rugged pH testers with one hand operation for general and industrial purposes, e.g. frequent testing of pools, aquariums, cooling towers, in the chemical industry and food processing.

• Large LCD display
• Easy maintenance and cleaning
• Waterproof and dustproof housing
• User-replaceable, rugged sensor
• Double junction sensor, pHTestr 10BNC only with BNC connector, without sensor
• Push-Button calibration with up to 3 points and Auto-Buffer recognition
• Buffer solutions USA 4.01 / 7.00 / 10.01 and NIST 4.01 / 6.86 / 9.18 usable
• Hold function, the last measured value remains on the display
• pHTestr 30, 10BNC and pH Spear with temperature display
• pH Spear tester with glass tip electrode for direct measurement of solid or semi-solid samples, e.g. in food processing
• Up to 500 hours operation time with single battery set

Specifications
pH range (pHTestr 10): Resolution (pHTestr 10): Accuracy (pHTestr 10):	-1.00 ... 15.00 (-1.0 ... 15.0) 0.01 pH (0.1 pH) ±0.01 pH (±0.1 pH)
pH calibration points:	3 points
Temperature range (only pHTestr 30, 10BNC, pH Spear):	0 ... 50 °C
Resolution:	0.1 °C
Accuracy (only pHTestr 30):	±0.5 °C
Operating temperature:	0 ... 50 °C
Temperature compensation (pHTestr 10BNC, pH Spear):	ATC (MTC)
Dimensions (B x L) (pH Spear):	165 x 38 mm (240 x 38 mm)
Weight (pH Spear):	90 g (103 g)
Power supply:	4 x 1.5 V A76 batteries
IP code:	IP 67

Professional digital multiparameter meters for mobile measurement, with 3, 2 or 1 universal measurement channels, wireless preparation, colour graphic display (black/white display for Multi 3510), data logger manually or automatically (timed) and 2 (1 for Multi 3510) waterproof USB interfaces suitable for field use. Easy to clean with a soft brush under water jet.

Multi 3630: The Multi 3630 IDS with three universal measurement channels is suitable for all WTW IDS pH, ORP, dissolved oxygen sensors, conductivity cells and turbidity sensors, whether connected to cable or wireless. Documentation of meter and sensor data. User control over MultiLab^® users. With USB-A and Mini USB-B interface and colour display.
Multi 3620: The Multi 3620 IDS with two universal measurement channels is suitable for all WTW IDS pH, ORP, dissolved oxygen sensors, conductivity cells and turbidity sensors, whether connected to a cable or wireless. Documentation of meter and sensor data. User control over MultiLab^® users. With USB-A and Mini USB-B interface and colour display.
Multi 3510: Sequential multi-parameter measurement. All WTW IDS pH, ORP, dissolved oxygen sensors, conductivity cells and turbidity sensors can be connected to the universal channel, either with cable or wireless module. Data transfer to PC with MultiLab^® Importer. With Mini USB-B interface and black/white display.
Multi 3510 IDS: Single meter in a carrying case with buffer 4, 7, KCl 3 mol / l, conductivity standard, batteries, USB cable
Multi 3510 SET 1: Meter in a carrying case with pH electrode SenTix^® 940, buffer 4, 7, KCl 3 mol / l, conductivity standard, batteries, USB cable
Multi 3510 SET 3: Meter in a carrying case with conductivity sensor TetraCon^® 925, conductivity standard, batteries, USB cable
Multi 3510 IDS SET 4: Meter in a carrying case with optical oxygen sensor FDO^® 925, batteries, USB cable
Multi 3510 SET KS1: Single meter in a carrying case with buffer 4, 7, KCl 3 mol / l, conductivity standard, batteries, USB cable, arming SM Pro

Specifications
Measuring range:	depending on IDS sensor
Memory Multi 3510 IDS:	manual: 500 data records automatic: 4500 data records
Memory Multi 3630 IDS / Multi 3620 IDS:	manual: 500 data records automatic: 10,000 data records
Dimensions (W x D x H):	approx. 180 x 80 x 55 mm
Weight:	400 g
Power supply Multi 3510 IDS:	4 alkaline batteries, USB
Power supply Multi 3630 IDS / Multi 3620 IDS:	PSU with charging function, 4 NiMH batteries (AA type), USB

Accessories IDS conductivity cell probes Alternative Multiparameter meters MultiLine®3630 IDS Alternative Multiparameter meters MultiLine®3620 IDS

Sturdy and economical, ease-of-use with high performance. The handy meter is IP54 splashproof, and comes with a conductivity electrode with automatic temperature compensation function.

• 5-point-calibration with ±1 % full scale accuracy
• Option of quick, easy automatic calibration or customised, near-to-sample manual calibration
• Auto-Ranging for conductivity / TDS measurements for fast response and best resolution over wide measurement range
• Easy-to-read display
• Available in kit version with hard carrying case
• Automatic switch-off

Scope of supply:
COND 6+: Conductivity meter, conductivity electrode CONSEN91B, electrode holder Grip-Clip, batteries
COND 6+K: Conductivity meter, conductivity electrode CONSEN91B, 1 x each 84 μS/cm, 1413 μS/cm and 12.88 mS/cm KCl calibration solution, 1 x deionised rinse water, electrode holder Grip-Clip, batteries, hard carrying case

Conductivity range:	0 µS/cm ... 200 mS/cm
Resolution:	0.05 % full scale
Accuracy:	±1 % of full scale ±1 LSD
Temperature range: Resolution: Accuracy:	0.0 ... 100.0 °C 0.1 °C ±0.5 °C
Power supply:	4 x 1.5 V AAA alkaline batteries, >500 h
Dimensions (W x L x H): Weight:	85 x 157 x 42 mm 255 g
IP code:	IP 54
Warranty:	3 years on the meter

Accessories Conductivity electrodes for Eutech™ conductivity meters

Professional digital multiparameter meters for mobile measurement, with 3, 2 or 1 universal measurement channels, wireless preparation, colour graphic display (black/white display for Multi 3510), data logger manually or automatically (timed) and 2 (1 for Multi 3510) waterproof USB interfaces suitable for field use. Easy to clean with a soft brush under water jet.

Multi 3630: The Multi 3630 IDS with three universal measurement channels is suitable for all WTW IDS pH, ORP, dissolved oxygen sensors, conductivity cells and turbidity sensors, whether connected to cable or wireless. Documentation of meter and sensor data. User control over MultiLab^® users. With USB-A and Mini USB-B interface and colour display.
Multi 3620: The Multi 3620 IDS with two universal measurement channels is suitable for all WTW IDS pH, ORP, dissolved oxygen sensors, conductivity cells and turbidity sensors, whether connected to a cable or wireless. Documentation of meter and sensor data. User control over MultiLab^® users. With USB-A and Mini USB-B interface and colour display.
Multi 3510: Sequential multi-parameter measurement. All WTW IDS pH, ORP, dissolved oxygen sensors, conductivity cells and turbidity sensors can be connected to the universal channel, either with cable or wireless module. Data transfer to PC with MultiLab^® Importer. With Mini USB-B interface and black/white display.
Multi 3630 IDS: Single meter in a carrying case, buffers 4 and 7, 3 mol/l KCl, conductivity standard, batteries, cables, power supply, arming SM Pro
Multi 3630 IDS SET F: Single meter in a field case with IDS sensors (digital pH sensor SenTix^® 940, digital conductivity cell TetraCon^® 925, optical sensor FDO^® 925), QSC Kit, stand, beaker, buffers 4 and 7, conductivity standard, batteries, cables, power supply, arming SM Pro
Multi 3630 SET G: Meter in a large carrying case with IDS sensors (digital pH sensor SenTix^® 940-3, optical sensor FDO^® 925-3, digital conductivity cell TetraCon^® 925-3), QSC Kit, buffers 4 and 7, conductivity standard, stand, beaker, CD-ROM, batteries, cables, power supply, arming SM Pro
Multi 3630 SET KS2: Single meter in a carrying case, with QSC Kit, buffers 4 and 7, conductivity standard, stand, beaker, CD-ROM, batteries, cables, power supply, arming SM Pro

Specifications
Measuring range:	depending on IDS sensor
Memory Multi 3510 IDS:	manual: 500 data records automatic: 4500 data records
Memory Multi 3630 IDS / Multi 3620 IDS:	manual: 500 data records automatic: 10,000 data records
Dimensions (W x D x H):	approx. 180 x 80 x 55 mm
Weight:	400 g
Power supply Multi 3510 IDS:	4 alkaline batteries, USB
Power supply Multi 3630 IDS / Multi 3620 IDS:	PSU with charging function, 4 NiMH batteries (AA type), USB

Accessories Turbidity Sensor VisoTurb® 900-P for Meters MultiLine® IDS Accessories IDS conductivity cell probes Alternative Multiparameter meters MultiLine®3620 IDS Alternative Multiparameter meters MultiLine®3510 IDS

The best value waterproof meter for measuring pH, mV and temperature.

• Large, three line LCD, shows pH or mV measurement with temperature and % slope
• Built-in memory function, stores up to 150 measurements along with temperature
• Auto buffer recognition, automatically identifies USA, NIST or DIN buffer sets for rapid calibration
• Indication of necessary recalibration
• Power with AA batteries or use optional AC adapter
• Features mV offset, calibrate to a Redox/ORP standard or use for pH electrode diagnostics
• Ready indicator, manual or automatic measurement hold feature and optional automatic shutoff function
• % slope and temperature displayed with each measurement
• Includes innovative Grip-Clip™, quickly and easily secures the electrode to your beaker or container

Additional features PH450

• Backlit display
• Extended memory stores up to 500 data sets, easy USB or RS232 output with optional data cables
• Built-in real-time clock stamps stored data and calibration data with time and date, meets standards for GLP (Good Laboratory Practices)
• Ability to use ion selective electrodes

Scope of supply PH15002K and PH45002K: Meter with electrode, ATC probe, Grip-Clip™ electrode holder, 2 x AA batteries, hard carry case, pH buffers, storage solution, rinse solution

Specifications
pH range:	-2.00 ... 16.00
Resolution:	0.01
Accuracy:	±0.01
pH calibration points:	Up to 5 points (USA & NIST), up to 6 points (DIN)
mV range:	±2000 mV
Accuracy:	±0.2 mV +2 digits or +0.5 % of reading
Temperature range:	-10.0 ... 110.0 °C
Resolution:	0.1 °C
Accuracy:	±0.5 °C
Power supply:	incl. 2 x AA batteries, >700 h continuous use, AC adapter (optional)
Dimensions (W x L x H): Weight:	83 x 200 x 57 mm 500 g
IP code:	IP 67
Warranty:	3 years on the meter

Portable routine model for pH measurements

• New, intuitive menu structure with fast and easy T-Pad navigation in 12 languages
• Robust design with IP67 protection for use in harsh and demanding environments
• Intelligent Sensor Management (ISM^®) functionality reduces the risk of errors
• Up to 5 point calibration with automatic buffer recognition and temperature compensation
• 4 predefined buffer groups and 1 user defined buffer group
• Automatic, manual and time dependant endpoint recording
• Data memory storage for 200 data points
• Power requirements: 4 x 1.5V AA or 1.3V NiMH accumulators

Items supplied:
S2-Meter: Instrument, electrode clip, operating instructions, quick guide, test certificate, declaration of conformity and batteries
S2-Standard kit: As S2-Meter, but also with InLab Expert Pro-ISM-IP67, buffer sachets for pH 4.01, 7.00, 9.21, 10.00
S2-Field kit: As S2-Standard kit, but also with bottles for calibration, uGo™ carrying case
S2-Food kit: As S2-Field kit, but with InLab Solids Pro-IP67 instead of InLab Expert Pro-ISM-IP67
S2-Light kit: As S2-Standard kit, but with InLab Versatile Pro instead of InLab Expert Pro-ISM-IP67

Specifications
pH
Measuring range: Resolution: Accuracy:	-2 ... 20 pH 0.01 / 0.1 ±0.01
mV
Measuring range: Resolution: Accuracy: Relative mV-measurement:	-1999 ... 1999mV 1 ±1 yes
Temperature
Measuring range: Resolution: Accuracy:	-5.0 ... 105.0 °C 0.1 °C ±0.5 °C
Dimensions (W x D x H):	222 x 70 x 35 mm

96 Well Polystyrene Microplates are manufactured under DIN ISO 9001 guidelines and can be traced all the way back to production through a defined LOT number system. Furthermore they are footprint compatible with automated systems. Polystyrene is a highly clear polymer with excellent optical properties which makes it ideal for precise optical measurements. An it is suitable for work with cell cultures.

Properties:

• F-Bottom / Chimney Well: chimney-like arrangement wells, each well stands on its own
• μClear® with ultra-thin films, without the use of adhesives or solvents
• Are analysed for detectable DNase, RNase and human DNA
• Are free of biocides and antistatics
• Are manufactured without the use of siliconbased mould release

Further eyepieces, phase contrast units and filters available on request. Complete fluorescence units for OBL series available on request.

These economy Conductivity meters offer years of reliable, accurate and consistent performance. User-friendly features make the instrument an ideal research partner in laboratories, production plants and schools.

• Large screen that displays conductivity or TDS readings with temperature in °C or °F
• Ready indicator lets you know when readings are stable
• Selectable cell constant
• Memory holds up to 100 data points
• Auto-ranging across 5 conductivity and TDS ranges
• Integral electrode holder

Additional features CON2700

• Extended memory holds up to 500 data points, time and date-stamped for GLP compliance
• Replatinization in 5 minutes with the built-in replanitization circuit
• Indication of necessary recalibration
• Auto-logging function for convenient continuous monitoring
• Password protection for setup and calibration
• Salinity and Resistivity measurements

Scope of supply: Meter with integral electrode holder, conductivity probe

Specifications
Conductivity range (CON2700):	0.050 µS … 500.0 mS
Resolution:	0.01 µS / 0.1 µS / 1 µS / 0.01 mS / 0.1 mS
Accuracy:	±1 % full scale
Conductivity calibration:	Auto / manual, up to 5 points
TDS range (CON2700):	0.050 ppm … 500000 ppm
Resolution:	0.01 / 0.1 / 1 / 10 / 100 ppm
Accuracy:	±1 % full scale
TDS calibration:	Auto / manual, 5 points per range
Salinity range (CON2700 only): Resolution: Accuracy:	0 ... 80000 ppm 0.01 / 0.1 / 1 / 10 / 100 ppm ±1 % full scale
Salinity calibration:	Manual, 1 point
Temperature range: Resolution: Accuracy:	0.0 … 100.0 °C 0.1 °C ±0.5 °C
Power supply:	100 .. 240 V adapter
Dimensions (W x L x H): Weight:	155 x 175 x 69 mm 650 g
IP code: Warranty:	IP 54 3 years on the meter

Alternative

Best value for a waterproof conductivity meter.

• Large, three line LCD, view conductivity or TDS measurement with temperature as well as cell efficiency
• Built-in memory function, stores up to 150 measurements along with temperature
• Adjustable temperature coeffcient, set to 0.0 % to meet USP methods for non-compensated measurements
• Acoustic indication of necessary recalibration
• Power with AA batteries or use optional AC adapter
• Calibrate using automatically recognized standards or manually, to a single point across all ranges or to multiple points (one calibration point per each conductivity range)
• Ready indicator, manual or automatic measurement hold feature and optional automatic shut-off function
• Adjustable conductivity-to-TDS conversion factor, from 0.4 to 1.0
• Includes innovative Grip-Clip™, quickly and easily secures the electrode to your beaker or container

Additional features CON450

• Backlit display
• Built-in memory function, stores up to 500 data sets, USB and RS232 output
• Built-in real-time clock stamps stored data and calibration data with time and date, meets standards for GLP (Good Laboratory Practices)

Scope of supply: Meter, conductivity cell (K =1.0), Grip Clip™, 2 x AA batteries, hard carry case, calibration solutions (1 x 1413 µS, 12.88 mS, 84 µS KCL Standard Solutions and 1 x Deionised (Rinse) Water, 60 ml each). CON45003K additionally with USB cable

Specifications
Conductivity range: Resolution: Accuracy:	0 … 200 mS 0.01 µS … 0.1 mS ±1 % full scale
Conductivity calibration:	Auto / manual, 1 point per range
TDS range: Resolution: Accuracy:	0 … 200000 ppm (TDS factor 1.0) 0.01 ppm … 100 ppm ±1 % full scale
TDS calibration:	Manual, 1 point per range
Salinity range (CON450 only): Resolution: Accuracy:	0 … 50000 ppm 0.01 ±1 % full scale
Salinity calibration:	Manual, 1 point
Temperature range: Resolution: Accuracy:	-10.0 … 110.0 °C 0.1 °C ±0.5 °C
Dimensions (W x L x H): Weight:	83 x 200 x 57 mm 500 g
Power supply (CON450 / CON150):	Incl. 2 x AA batteries, >300 h / >500 h continuous use, AC adapter (optional)
IP code:	IP 67
Warranty:	3 years on the meter

FiveEasy™ and FiveEasy™ Plus benchtop meters provide high quality conductivity measurements with the simple click of a button. They are the perfect choice for reliable measurement data at a reasonable price.

• Large, easy to read and easy to understand display with all information visible at a glance
• Five self-explanatory buttons making operation simple and easy
• Fast and easy connectivity for simple and secure data transfer (FP only)
• Electrode arm extension pole included

Scope of supply:
F30/FP30-Meter: Meter with CD operating instructions, QuickGuide, declaration of conformity, test certificate, power supply
F30/FP30-Standard: as F30/FP30-Meter, plus LE703 conductivity sensor, 1 each x 1413 µs/cm and 12.88 mS/cm standard sachets

Specifications
Measuring range (Accuracy)
Conductivity F30 / FP30:	0.01 µS/cm ... 200 mS/cm / 0.01 µS/cm ... 500 mS/cm (± 0.5 % of measured value)
TDS F30 / FP30:	0.01 mg/l ... 200g/l / 0.01 mg/l ... 300 g/l
Temperature F30 / FP30:	0 ... 100 °C (0.5 °C) / -5 ... 105 °C (0.3 °C)
Calibration F30:	1 point, 3 predefined standards
Calibration FP30:	1 point, 3 predefined standards, manual cell constant input
Input:	Mini-DIN
Temperature compensation:	Linear: 0.00 %/°C ... 10.00 %/°C
Reference temperature:	20 °C and 25 °C
Power supply:	100 ... 240 V / 50 ... 60 Hz / 12 V DC
FP30 only
Salinity:	0.00 ... 42 psu
Memory:	200 measurements
Interface:	RS232, USB

For connecting pH electrodes with built-in temperature sensors and MultiPin™ plug head or S7 plug head (without temperature sensor). Suitable for a wide range of measuring devices from different manufacturers.

For the pH measurement this droplet type pH meter only needs 0.6 ml of sample. Suitable for e.g. foods, soil, water-soluble cutting oil or alkaline cleaning liquid.

• Quick measuring results in 3 seconds
• Unconsumable KCl due to internal electrode liquid
• Completely flat measurement unit allows easy cleaning
• 100 measured data can be wirelessly transferred via near field comminication (NFC)
• 2 calibration options: calibration at pH 4.01, 6.86 and 9.18 or at pH 4.01, 7.00 and 10.01
• Silicone cover for added prtotection

Scope of supply: pH Meter, buffer solutions for pH 4.01, 6.86 and 9.18, silicone cover

Specifications
Measuring range	0 ... 14 pH
Resolution:	0.01 pH
Accuracy:	±0.10 pH (2.0 ... 12.0 pH)
Calibration points:	at 4.01 pH, 6.86 pH, 9.18 pH or at 4.01 pH, 7.00 pH, 10.01 pH
Temperature compensation:	0.0 ... 50.0 °C
Dimensions (W x D x H):	66 x 31 x 109 mm
Power supply:	2 x AAA alkaline batteries
IP code:	IP 65

Accessories

Valuable and waterproof pH testers, easy to use. Suitable for general and industrial purposes, e.g. in laboratories, pools, aquariums and cooling towers.

• Sensor protective cap can be used as a container for samples
• Easy battery change
• Auto-calibration and auto-buffer recognition
• Up to 3 calibration points (only EcoTestr pH 2)
• Waterand dustproof housing
• Long-lasting, fixed sensor
• Automatic temperature compensation (only EcoTestr pH 2)
• Hold function freezes last reading temporarily

Specifications
Range:	0.0 ... 14.0 pH
Resolution:	0.1 pH
Accuracy:	± 0.1 pH
Power supply:	4 x 1.5 V A76 batteries
IP code:	IP 67

Depending on the set, the portable multi-parameter measuring device is ideally suited for the precise determination of pH, redox, temperature, conductivity / TDS / salinity as well as saturation and concentration of dissolved oxygen.

• Intuitive user interface thanks to graphical LCD display
• Simultaneous determination of up to three parameters due to galvanic isolation
• Selection between multi-parameter display or single value display
• Setting of alarm limits for parameter monitoring
• Micro-USB connection for software-free data transmission and power supply
• Data logger records measurement data incl. time stamp and measuring point ID in a fixed time interval or manually at the push of a button
• Automatic recognition of standard solutions
• Evaluation of the sensor quality after calibration
• Rechargeable NiMH batteries

Scope of supply: Meter, protective armouring, electrode holder for 2 electrodes, pH/temp. electrode type 231, pH buffer (4.01 / 7.00 / 10.01), storage solution for pH/ORP electrodes, 3 x AAA-NiMH rechargeable batteries, user manual
SD 335 Multi (Set 1) pH / Con / Temp. additionally: Conductivity electrode LC 12 (< 200 mS/cm), conductivity solution 1413 µS/cm (NIST)
SD 335 Multi (Set 2): pH / DO / Temp. additionally: Galvanic oxygen sensor (2 m cable), refill electrolyte, membrane heads, calibration bottle with sponge
SD 335 Multi (Set 3): pH / Con / DO / Temp. additionally: Conductivity electrode LC 12 (< 200 mS/cm), conductivity solution 1413 µS/cm (NIST), galvanic oxygen sensor (2 m cable), refill electrolyte, membrane heads, calibration bottle with sponge

Specifications
pH:	-2.00 ... 16.00 pH
mV:	-2000 ... 2000 mV
Conductivity:	0.000 ... 500 mS/cm
TDS:	0.000 ... 500 g/l
Salinity:	0.0 ... 70.0 PSU
O2-concentration:	0.00 ... 50.00 mg/l
O2-saturation:	0.0 ... 500.0 %
Temperature:	-10.0 ... 110.0 °C
Data logger:	8 GB
Interface:	Micro-USB
Dimensions (W x D x H):	100 x 164 x 37 mm
Weight:	310 g
Power supply:	3 x AAA NiMH rechargeable batteries, Micro-USB
IP code:	IP 67

Accessories Electrodes for pH/Redox meter SD305pH Accessories Accessories for oxygen meter SD 315 Oxi Accessories Electrodes for Conductivity meter SD 325 CON Accessories Calibration and Storage solutions for pH/Redox-Meter SD 305 pH Accessories Calibration solution for Conductivity meter SD 325 CON

The pH6+ and pH5+ offer you the greatest value-for-money for your basic pH measurement needs. Both meters measure pH and temperature, the pH6+ aditionally measures mV / ORP. Rugged and user-friendly, these meters come with rubber boots for protection against harsh field elements.

• 3-point-calibration with auto-buffer recognition
• Automatic temperature compensation (ATC)

Scope of delivery: Meter with Rubber Armour/Stand, plastic carrying case (except pH601+ and pH501+)

Specifications
pH range:	0.00 ... 14.00 pH
Resolution:	0.01 pH
Accuracy:	±0.01 pH
pH calibration points:	1 ... 3 points
mV range (pH6+ only):	±1000 mV
Accuracy:	±0.2 mV
Temperature range:	0.0 ... 100.0 °C
Resolution:	0.1 °C
Accuracy:	±0.5 °C
Dimensions (W x L x H): Weight:	85 x 157 x 42 mm 255 g
Power supply:	4 x 1.5 V AAA alkaline batteries, >200 h
IP code:	IP 54
Warranty:	3 years on the meter

Accessories pH combination electrode Eutech™ with BNC connector Accessories

Portable pH meter for field work and laboratories.

• Measurement made easy: A large, well-structured display, intuitive button arrangement and simple menu ensure measurements can be performed in just a few clicks
• Ergonomic design for one handed operation: Thanks to its ergonomic design, handling the FiveGo™ is a comfortable experience. The foldable stand provides optimal viewing on flat surfaces
• IP67 Water and dustproof: The IP67 waterproof protection makes the FiveGo™ portables able to withstand wet and demanding environments

Scope of delivery:
F2-Meter: Meter only
F2-Standard kit: Meter with LE438 sensor
F2-Food kit: Meter with LE427 sensor, carrying case
F2-Field kit: Meter with LE438 sensor, carrying case

Specifications
pH Measuring range: Resolution: Accuracy:	0.00 ... 14.00 0.01 ±0.01
mV Measuring range: Resolution: Accuracy:	-1999…1999 mV 1 mV ± 1 mV
Temperature Compensation:	ATC and MTC
Calibration:	3 points, 4 predefined buffer groups
Memory size:	200 measurements, current calibration
Temperature Measuring range: Resolution: Accuracy:	0 ... 100 °C 0.1 °C ±0.5 °C
Dimensions (W x D x H):	188 x 77 x 33 mm
IP code:	IP 67 (meter + electrode)

Portable pH measuring devices by SI Analytics with Memosens^® technology offers increased safety and a user-friendly interface.

• Durable design for daily measurements
• Connection: 2 x 4mm diam. for integrated or separate temperature sensor
• Contrast-rich and scratch-resistant clear glass LCD display
• Self-explanatory operation with one clear text line
• Display of the sensor status at one glance with Sensoface
• Calibration of up to 3 points with automatic buffer detection (from 10 buffers)
• Manual calibration by indicating random buffer values
• Real-time clock and display of battery charging status
• Extended operating time of more than 1,000 hours with standard batteries (4 x AA)

HandyLab 750 additional features:

• Store up to 5,000 data points
• Micro-USB connection to communicate with the software HandyLab Pilot software for evaluation of data from digital Memosens^® sensors
• HandyLab Pilot software (included with delivery), allows easy management and evaluation of stored data and can be used for device configuration

Supplied with: Set with pH meter, AquaLine 90pH, SKK K1A, DIN buffer solutions in ampoules

Specifications
pH measurement Memosens (also ISFET) Measuring range:	-2.000 ... 16.000 pH
mV measurement Memosens Redox Meeasuring range:	-2000 ... 2000 mV
pH/mV measurement (analog)
pH measurement measuring range:	-2 ...16 pH
mV measurement measuring range:	-1300 ... 1300 mV
Temperature measurement
Measuring range with sensor NTC 30 kOhm:	-20 ... 120 °C
Measuring range with sensor Pt 1000:	-40 ... 250 °C

Portable pH meter with external electrode.

• BNC connection
• With automatic pH calibration
• Handy and robust
• Current value memory
• Simple calibration with keypad
• Electrodes for different applications
• Min/Max- and hold function

pH meter set contains: pH meter PHT 810, penetration electrode AT 206, punching pin, buffer solutions pH 4 and pH 7, KCI solution, carrying case, 2-point calibration certificate

Specifications
Measuring range: Accuracy: Resolution:	0 ... 14 pH ±0.03 pH ±0.01 pH
Operating temperature: Storage temperature:	0 ... 50 °C -25 ... 60 °C
Battery: Battery lifetime:	Lithium 3 V/1 Ah approx.. 5 years
Dimensions (W x L x H):	54 x 110 x 22 mm
Weight:	approx. 200 g

Accessories Electrodes for pH meter PHT 810

Plastic electrode AT 200: Housing material: Plastic, Diam.: 12mm, Length shaft: 120mm
Glass electrode AT 201: Housing material shaft: Glass, Diam. shaft: 12mm, Length shaft: 120mm
Penetration electrode AT 206 for measurements in semi-solid food stuff and other materials. Housing material: Glass, Diameter shaft/electrode: 25mm / 5mm, Length shaft/electrode: 65mm / 12mm, with 1m cable and BNC plug

The pH/Redox/ISE portable meter is used to determine the pH, the redox potential and the temperature. It combines the advantages of mobile field work with the precision and the comfort of a laboratory meter.
The PHT 830 has an automatic temperature compensation for the pH measuring as well as an adjustable reference temperature with measurements without temperature sensor. For calibration a manual or automatic two point calibration routine can be used.

PHT 830 Set 1 incl. plastic electrode AT 830 pH K and 1.50 m cable, suited for universel applications in laboratories and field.
PHT 830 Set 2 incl. glass electrode AT 830 pH G and 1.00 m cable, suited for applications in laboratories.
PHT 830 Set 3 incl. penetration electrode AT 830 pH E and 1.00 m cable, suited for applications in food industries.

All electrodes are equipped with an integrated temperature sensor Pt 1000, allowing parallel measurement of pH value and temperature.

Scope of supply: pH meter incl. electrode as indicated, 1 x buffer solutions pH 4.006 and pH 6.865 each, 1 x KCl solution, case

Specifications
Measuring range / Resolution
pH: mV: Temperature:	0 ... 14 pH / 0.01 pH -1999 ... 1999 mV / 1 mV -10 ... 100 °C / 0.1 °C
Accuracy
pH: Temperatur:	± 0.03 (± 2 pH-steps) ± 0.1 °C
Display:	128 x 64 pixel, backlighted
Interface:	USB with "Interface HMG USB", isolated
Ambient temperature:	-10 °C ... 55 °C
Rel. humidity:	Max. <95 % (non-condensing)
Connections:	Connector BK for sensor (4-pole USB interface socket)
Housing:	ABS
Dimensions (W x D x H):	200 x 40 x 95 mm
Batteries:	3 batteries Type AA, IEC R6, LR6, 1.5 V
IP code:	IP 65

Accessories

Economical, user-friendly and accurate, the PH700 is the ideal choice for routine applications in laboratories, production plants and schools.The advanced PH2700 offers an easy to read screen that says more. View pH or ORP readings, with temperature, electrode status, calibration points, date and time all at once.

• Large, easy-to-read display
• Ready indicator
• 5-point calibration with auto-buffer recognition
• Memory holds up to 100 data points
• Integral electrode holder

Additional features PH2700

• Up to 6-point calibration with auto-buffer recognition
• Quick, easy electrode diagnosis with multiple pH slopes and offset display
• Extended memory holds up to 500 data points, time and date-stamped for GLP compliance
• Alarm for re-calibration
• Auto-Log function for convenient continuous monitoring
• Password protection for setup and calibration

Scope of supply: Meter with Integral Electrode Holder (except PH70040), electrodes as indicated

Specifications	pH700 // pH2700
pH range:	0.00 ... 14.00 // -2.000 ... 20.000
Resolution:	0.01 // 0.001
Accuracy:	±0.002
pH calibration points:	Up to 5 points // Up to 6 preset or 5 custom
mV range:	±1999 mV // ±2000 mV
Accuracy:	±0.2 mV (±199.9 mV) // ±2 mV (beyond)
Temperature range:	0.0 ... 100.0 °C
Resolution	0.1 °C
Accuracy:	±0.5 °C
Dimensions (W x L x H): Weight:	155 x 175 x 69 mm 650 g
Power supply:	100 ... 240 V adapter
IP code:	IP 54
Warranty:	3 years on the meter

Accessories

Simultaneously measure pH and temperature with a pocket sized tester designed to provide accurate measurements on the go for a variety of applications. The Pocket Tester Elite pH has a leakproof, transparent wide-base cap for upright standing with fill line indicator. The Elite pH Spear pocket tester features a spear tip open pore sensor. This rugged and user-friendly tester is ideal for direct measurement of solid or semi-solid samples.

• 1-push calibration
• Large 4-digit double line display
• Backlit graphic display
• Auto-hold readings
• Easy-to-operate, intuitive keypad
• Auto-off

Scope of supply:
Elite pH and Elite pH Spear: Tester incl. batteries, lanyard
Elite pH Kit and Elite pH Spear Kit: Tester incl. batteries, laynard, soft carry case, buffer sachets set (pH 4.01, 7.00, 10.01, deionized water, 5 x 20 ml each)

Specifications	Elite pH // pH Spear
pH range: Resolution: Accuracy:	-1.00 ... 15.00 0.01 pH ±0.01 pH ±1 LSD
pH calibration points:	1 ... 3 points
Temperature range:	0 ... 60 °C
Resolution:	0.1 °C
Accuracy:	0 ... 50 °C (±0.5 °C + 1 LSD) 50 ... 60 °C (±1.0 °C + 1 LSD)
Operating temperature: Relative humidity:	5 ... 45 °C 5 ... 85 %, non-condensing
Temperature compensation:	ATC // MTC
Dimensions (W x L x H): Weight:	200 x 45 x 36 mm // 280 x 45 x 36 mm 160 g // 150 g
Power supply:	4 x AAA 1.5 V batteries
IP code:	IP 67

• Housing made of ABS
• Automatic switch-off after 15 minutes
• Hold-function
• Auto-lock-function
• Automatic deactivation
• Battery level indicator
• Exchangeable battery
• Robust
• Waterproof
• Adjustable

Specifications
Measuring range: Accuracy: Resolution:	0 ... 14 pH ±0.1 pH ±0.2 pH
Operating temperature: Storage temperature:	0 ... 50 °C -25 ... 60 °C
Battery: Battery lifetime:	4 x 1.5 V A76 / LR44 approx. 150 hours
Dimensions (W x L x H):	170 x 32 x 15 mm
Weight:	approx. 70 g
IP code:	IP 65

Portable professional model for pH measurement

• New, intuitive menu structure with fast and easy T-Pad navigation
• Robust design with IP67 protection for use in harsh and demanding environments
• Intelligent Sensor Management (ISM^®) functionality reduces the risk of errors
• New sunlight-proof screen guarantees screen readability even in direct sunlight
• New StatusLight gives a fast, visual confirmation showing if the meter is ready to measure or not
• Operating support for 12 languages with information shown in complete words and sentences
• Up to 5 point calibration with automatic buffer recognition and temperature compensation
• 8 predefined buffer groups and 1 user defined buffer group (1 user defined ion-standard)
• Automatic, manual and time dependant endpoint recording
• Data memory storage for 2000 GLP data points with weatherproof Micro-USB connection for data export
• Power requirements: 4 x 1.5V AA or 1.3V NiMH accumulators

Items supplied:
S8-Meter: Instrument, LabX direct pH, USB cable, electrode clip, base accessory, operating instructions, quick guide, test certificate, declaration of conformity and batteries.
S8-Standard kit: As S8-Meter, but also with InLab Expert Pro-ISM-IP67 and buffer sachets for pH 4.01, 7.00, 9.21 and 10.00.
S8-Field kit: As S8-Standard kit, but also with bottles for calibration and uGo™ carrying case.
S8-Biotech kit: As S8-Field kit, but with InLab Routine Pro ISM (incl. cable) instead of InLab Expert Pro-ISM-IP67.
S8-Fluoride kit: As S8-Standard kit, but with perfectION Fluoride instead of InLab Expert Pro-ISM-IP67, without buffer sachets.

Specifications
pH Measuring range: Resolution: Accuracy:	-2 ... 20 pH 0.001 / 0.01 / 0.1 ±0.002
mV (rel. mV) Measuring range: Resolution: Accuracy:	-2000 ... 2000 mV 0.1 / 1 ±0.1
Ion Measuring range: Resolution: Accuracy:	1,00e-09 ... 9,99e+09 3 or 4 digits (auto-range) ±0.5 %
Temperature Measuring range:	-5.0 ... 130 °C (ATC) -30.0 ... 130 °C (MTC)
Resolution:	0.1 °C
Accuracy:	± 0.2 °C if T = 0 °C … 105 °C ± 0.5 °C if T < 0 °C or T > 105 °C
Dimensions (W x D x H):	70 x 35 x 222 mm
Units:	mg/L, mmol/L, mol/L, %, ppm, pX

Triple channel instrument with pH/mV, conductivity and DO/BOD expansion units.

S479-Kit: Includes instrument, pH/mV, conductivity and DO/BOD expansion units, uPlace™ electrode holder,semi-transparent cover, operating instructions, installation and quick guide, LabX^® direct pH PC software, declaration of conformity and test certificate. Included kit sensors: InLab^® Expert Pro-ISM, InLab^® 731-ISM and InLab^® OptiOx™.

Soft rubber, shock absorbing cover for ProfiLine handheld meters

Wireless measurement of pH/Redox, conductivity, dissolved oxygen and turbidity.

• Bluetooth^® LE
• Universal plug head
• Opening for electrolyte solution refilling (only pH electrodes with liquid electrolyte)
• Signal LED (RGB)

Suitable for IDS portable meters MultiLine^® Multi 3630 IDS / 3620 IDS / 3510 IDS, as well as for IDS laboratory meters inoLab^® Multi 9630 IDS / 9620 IDS / 9310 IDS.

Specifications
Range:	About 10 m
Continuous operating times
IDS pH/ORP electrodes:	60 h
IDS Conductivity cells:	30 h (conductivity up to 1 S)
IDS Oxygen sensor:	9 h
IDS Turbidity sensor:	5 h
IP code:	IP43
Power supply:	Re-chargeable LiPo battery 230mAh

Crystal-clear bins let you see your small items inventory. See inventory levels of pipette tips, tubes, fittings, finger cots, and other bulk small items at a glance. Flip-top covers on generous openings make filling and dispensing easy and keep products dust-free. 4 sizes available to cater to a wide variety of storage needs. With non-skid rubber feet.

Disposal bags made of polypropylene foil for sterilisation in the steam autoclave. On request disposal bags are also available with imprint ”Biohazard“ if a sufficient number is ordered. For users of hot-air sterilisers, disposal bags made of polyamide are available for use up to +160 °C.

Properties:

• Ideal for the hygieni disposal of contaminated laboratory items

Leak-proof and robust pH probes for pH meters 205, 206-pH1 and 206-pH2, insensitive to contamination, with maintenance-free gel electrolyte and gel storage cap.

Specifications
pH range:	0…14
Accuracy:	±0.02
Resolution:	0.01

Robust, intuitive analyser for daily routine measurements in the laboratory and process. The device is operated with 4 AA batteries.

• Ergonomically optimised for use on site and in the laboratory
• High-contrast LCD display
• Memosens sensors and analogue pH sensors can be used
• Detachable sensor quiver protects against drying out and damage
• Display of sensor condition with Sensoface
• Calibration with automatic buffer recognition "Calimatic"
• Automatic detection of the temperature sensor
• With real-time clock

Scope of supply: pH meter, 4 x AA batteries, carrying strap, specific test report, operating instructions

Specifications
Input pH/mV (analogue):	pH socket, DIN 19 262 (13/4 mm)
pH:	-2 ... 16
mV:	-1300 ... 1300 mV
Temperature input:	2 x 4 mm diam. for integrated or separate temperature detector
Temperature with NTC 30 kΩ: Temperature with Pt 1000:	-20 ... 120 °C -40 ... 250 °C
Memosens pH input (ISFET):	M8 socket, 4 pins, for Memosens lab cable
pH:	-2.000 ... 16.000
mV:	-2000 ... 2000 mV
Temperature range:	-50 ... 250 °C
Dimensions (W x D x H):	132 x 156 x 30 mm
IP code:	IP 66 / 67 with pressure compensation

Alternative

BLAUBRAND^®. DIN EN ISO 648. DE-M marking. Calibrated to deliver (TD, Ex).

The Elite ORP pocket tester features a simultaneous display of the Oxidation-Reduction-Potential (ORP) measurement with temperature. With leakproof, transparent wide-base cap for upright standing with fill line indicator.

• 1-push calibration
• Large 4-digit double line display
• Backlit graphic display
• Auto-hold readings
• Easy-to-operate, intuitive keypad
• Auto-off

Scope of supply:
Elite ORP: Tester incl. batteries, lanyard
Elite ORP Kit: Tester incl. batteries, laynard, soft carry case

Specifications
ORP/RMV: Resolution: Accuracy:	-1000 ... 1000 mV ±1 mV ±2 mV ± 1 LSD
Calibration Points:	1 point
Temperature: Resolution:	0 ... 60 °C 0.1 °C
Operating temperature: Relative humidity:	5 ... 45 °C 5 ... 85 %, non-condensing
Temperature compensation:	MTC
Dimensions (W x L x H): Weight:	200 x 45 x 36 mm 160 g
Power supply:	4 x AAA 1.5 V batteries
IP code:	IP 67

Flask carriers for Magnetic stirrers with or without handles as indicated.

For holding round flasks when used with magnetic stirrers. Made of anodised aluminium. Can be used up to max. 180 °C.

Fits on magnetic stirrers: RCT basic, RET basic, RH basic, RH basic white, RH digital, RH digital white, RET control-visc, RET control-visc white, IKA plate (RCT digital), C-MAG HS 7 control (only with adapter).

Please order the appropriate inlay for the designated flask size.

The testo 205 is a robust food penetration measuring instrument for temperature and pH values, with automatic temperature compensation. The robust penetration measurement tip is exchangeable and insenstitive to dirt thanks to the hole diaphragm.

• pH tip embedded in breakage-proof plastic
• Combined penetration tip with temperature probe
• Maintenance-free gel electrolyte
• Automatic final value recognition (auto-hold)
• 2-line, illuminated display

Scope of supply:
Set testo 205: Instrument, penetration probe, storage cap, belt and wall holder
Starter-Set testo 205: Instrument, penetration probe, 2 x 250 ml calibration bottles (pH 4 and 7), belt and wall holder, aluminium case

Specifications
pH range: Resolution: Accuracy:	0 ... 14 0.01 0.02 ±1 digit
pH calibration points:	1 ... 3 points
Temperature range:	0 ... 60 °C (short-term to 80 °C max. 5 min)
Resolution:	0.1 °C
Accuracy:	± 0.4 °C
Operating temperature:	0 ... 50 °C
Dimensions (W x D x H):	38 x 145 x 167 mm
Weight:	135 g
Power supply:	Incl. 4 x batteries LR44
IP code:	IP 65

Accessories Replacement probes for pH meters 205/206 Accessories Accessories for testo 205/206

Checks the quality and temperature of cooking oil. Can be used in hot oil up to 200 °C, the user is protected from heat. Value is visualised by coloured display backlight (red, yellow, green). Protrection class IP 65, water resistant.

Scope of supply: Cooking oil tester testo 270, reference oil, plastic case, calibration protocol, training card, instruction manual and batteries.

Specifications
Range:	0.0 … 40.0 % TPM
Accurracy:	±2 % TPM (40 … 190 °C)
Resolution:	0.5 % TPM (40 … 190 °C)
Dimensions (W x L x H):	300 x 170 x 50 mm
Power supply:	2 x AAA (Micro)

Glass microfibre filters are designed for prefiltration in order to protect against membrane fouling. Grade GF 92 is strengthened with an inorganic binder.

• Increased strength
• Temperature resistant up to 500 °C
• Medium filtration speed

The HQ Series is for water quality professionals who want to perform electrochemical analysis for field and lab environments.
They provide a true rugged, field-ready solution with on-screen, visual step-by-step operating guidance that provides users with confidence in reporting and managing their results. Unlike other field meters with basic user interfaces and without easily accessible data, the HQ Series secures, simplifies, and accelerates the complete measurement process for field users.

• Easy calibration
• Sensors designed for every application available

The HQ Series is for water quality professionals who want to perform electrochemical analysis for field and lab environments.
The new portable platform will allow you to collect intuitive, accurate measurements, manage data, and easily review results, while supplying an IP67 robustness rating. The meters provide a true rugged, field-ready solution with on-screen, visual step-by-step operating guidance that provides users with confidence in reporting and managing their results. Successful calibration has never been so simple.
Most measuring issues are due to incorrect calibration procedures. With the illustrated, step-by-step on-screen calibration and troubleshooting procedures, water quality professionals can succeed every time.
Unlike other fi eld meters with basic user interfaces and without easily accessible data, the HQ Series secures, simplifies, and accelerates the complete measurement process for field users.
The bundles includes the portable digital meter, the corresponding sensors including cable (1 m), a field case, a stand, a protective cover and the consumables suitable for the respective measurement.

Precision pH electrodes with plastic shaft and liquid electrolyte KCl 3 mol/l Ag+ free, with built-in temperature sensor NTC 30 kOhm. Cable length 1.5 m, SenTix^® 950-P wireless-ready.

Specifications
Temperature range:	0 ... 80 °C
pH range:	0 ... 14 pH
Length / diam.:	120 mm / 12 mm
Electrolyte:	KCl 3 mol/l Ag+ free
Diaphragm:	Ceramic
Membrane shape:	Cylinder
Membrane resistance at 25°C:	< 1GΩ

Laboratory pH meter for standard laboratory applications

Gaincheck^® performs a complete instrument check. At the touch of a button it not only checks electrical features, but also display and keypad. A short check after power-on automatically reviews efficiency of instrument functions.
Drycheck^® monitors electrode impedance and alerts to electrode dry-up even in stand-by mode.
Sensoface^® monitors the electrode performance and provides information on its condition, by evaluating zero point, transconductance and electrode impedance
Trueline^® delivers a calibrated analog line recorder signal
Calimatic^®, which automatically recognises the correct buffer, calibrates safely and easily at the touch of a button. EMC design protects instrument against electromagnetic interference. CE compliant and follows the EMC guidelines.

Case made of glass reinforced PA12, stainless steel cover, IP 54 protective system, ready for connection to ZU 6954 attachment stand. Alphanumeric display, 2 x 4 digits, 14 segment LED, character height 13 mm, 3 Sensoface status indicators.

Electrode monitoring

• Sensoface^®: Evaluates zero point, transconductance, response time and electrode impedance, good/average/poor optical display gives information on electrode condition, can be disabled.
• Drycheck^®: Monitors electrode impedance for dry-up, glass breakage and defective connections also in stand-by mode. Calibration timer monitors calibration intervals.

Instrument self-test system:

• Gaincheck^®: Tests electrode and memory data and monitors the measuring circuit and measurement value analysis. Results of all test stages are displayed.

Laboratory pH meter 766, includes mains cable and 3 year guarantee.
Laboratory pH meter 766 SET A, with mains cable and pH/Pt 1000 SE 101 combination electrode (Plastic, 110 mm).
Laboratory pH meter 766 SET B, with mains cable and pH/Pt 1000 SE 100 combination electrode (Glass, 165 mm).

Accessories  Accessories  Accessories  Accessories Temperature probes for Knick pH meter and conductivity meter 703

With many safety features making pH measurement easier and more reliable.

Fullcheck^® automatically checks instrument function from input socket to recorder output. Functional efficiency of the instrument can be documented as part of quality management in accordance with DIN EN ISO 9000 using a test print. Drycheck^® monitors electrode impedance and alerts to electrode dry-up, glass breakage and defective connections even in stand-by mode. Sensoface^® monitors the electrode performance and gives information on electrode condition, evaluating zero point, transductance, response time, electrode impedance and calibration intervals.

Trueline^® delivers a calibrated analog recorder signal (electrically isolated). Calimatic^® automatically recognises the correct buffer. EMC design protects instrument from electromagnetic interference. The 765 laboratory pH meter complies fully with NAMUR (German committee for measurement and control standards in the chemical industry) EMC recommendations.

Temperature compensation is either automatic with a Pt 100 or Pt 1000 sensor or manual. Data can be processed immediately by a computer via standard RS 232 interface. Direct output to a printer is also possible. Large, bright LED display enables simultaneous readout of 2 measured values, such as pH value and temperature.
Case made of glass reinforced PA, with non-rusting, stainless steel, IP 54 protection level cover, ready for connection of ZU 6954 electrode stand.
Alpahnumerical display, 2 x 4 digits, 14 segment, 13 mm characters, 3 Sensoface status indicators.

Interface:
RS 232 without control lines, galvanically isolated, printer or computer interface.

Printer control:
Via serial interface for ZU 0244 or other standard printers, printing at the touch of a button or via print interval timer 0.1 to 999.9 min.

Electrode monitoring:

• Sensoface^®:analysis of zero point, transductance, response time and electrode glass impedance, good/average/poor optical display for monitoring electrode condition can be disabled.
• Drycheck^®: Monitors electrode impedance and alerts to electrode dry-up, glass breakage and defective connections even in stand-by mode. Calibration timer monitors calibration interval.

Instrument self-test system:

• Fullcheck^®: tests all measurement electronics, including analogue output, segment and keyboard test in diagnostic mode, automatic short test after power-on, QM documentation print-outs according to DIN EN ISO 9000 retrievable in diagnostic mode or via interface (printer).

Laboratory pH meter 765, includes mains cable, electrode not included, 3 year guarantee.
Laboratory pH meter 765 SET, with electrode statistics (Opt. 347), pH/Pt 1000 SE 100 combination electrode, ZU 6954 attachment stand and ZU 6928 buffer set (no other optional ancillary equipment available).

Accessories Nominal electrode zero point/electrode slope option 346 for pH meter 765 Accessories  Accessories  Accessories  Accessories  Accessories  Accessories Temperature probes for Knick pH meter and conductivity meter 703

Robust and waterproof hand-held meter with data logger for field use. For measurements in drinking water, cooling / boiler water, waste water, pool water and surface water.

• Automatic temperature compensation
• Buffer recognition of Lovibond^® standards (pH 4.01 / 7.00 / 10.01) and buffers according to DIN 19266
• Choice between 1-, 2- or 3-point calibration
• Evaluation of the sensor quality after each calibration
• Alarm function with adjustable limits
• Auto hold function
• Battery status indicator
• Redox measurement in mV or mVH according to DIN 38404-6
• Data transfer and evaluation via software possible

Scope of supply:
SD 305 pH/ORP (Set 1): Instrument, protective covering with electrode holder, carrying case, pH/Temp. electrode Type 231, pH buffer solution (4.01 / 7.00 / 10.01), storage solution for pH/ORP electrodes, batteries, manual
SD 305 pH/ORP (Set 2): Instrument, protective covering with electrode holder, carrying case, pH/Temp. electrode Type 226, temperature probe Pt1000, pH buffer solution (4.01 / 7.00 / 10.01), storage solution for pH/ORP electrodes, batteries, manual
SD 305 pH/ORP (Set 3): Instrument, protective covering with electrode holder, carrying case, Redox electrode Type 242, temperature probe Pt1000, ORP control solution (470 mV), storage solution for pH/ORP electrodes, batteries, manual

Specifications
pH:	-2.000 ... 16.000
Accuracy:	± 0.005
Temperature:	-5.0 ... 150 °C
Accuracy:	± 0.2 °C
Redox (ORP):	-2000.0 ... 2000.0 mV
Accuracy:	± 0.05 % FS (mV or mVH)
Datalogger:	10000 Data sets automatically 1000 Data sets manually
Dimensions (W x D x H):	100 x 164 x 37 mm
Weight:	302 g
Power supply:	2 x AAA battery
IP code:	IP 67

Accessories Electrodes for pH/Redox meter SD305pH Accessories Calibration and Storage solutions for pH/Redox-Meter SD 305 pH

For use with electrodes having a zero point other than pH 7 and a slope other than 59.2 mV/pH. Nominal electrode zero point and nominal electrode slope is configurable.

Zero point:	pH 0 ... 14
Slope:	25 ... 61 mV/pH

Pages of paper with thread stitching. With easy-to-clean, waterproof polyethylene cover.

For ammonia ISE electrodes 9512BNWP and 9512HPBNWP.

pH electrodes with gel electrolyte, BNC plug and fixed cable. Incl. wetting cap.

The testo 206 series is ideally suited for applications in liquid and semi-solid media, especially in the food sector. The instruments stand out due to the combination of a pH immersion probe and a temperature probe for precise and fast temperature compensation. Thanks to the large volume of gel electrolyte and the dual wall diaphragm, the probe is leak-proof, maintenance-free, robust and insensitive to dirt. The protective cover TopSafe provides the instruments with the protection class IP 68.

• Built-in temperature sensor
• Maintenance-free gel electrolyte
• Robust, waterproof and dishwasher-safe protective cover
• Automatic final value recognition (Auto-hold)
• Two-line LCD display

Specially suited for fast pH checks in liquids.

Scope of supply:
testo 206-pH1: pH Meter, pH1 probe head, storage cap, protective cover TopSafe, belt and wall holder
Starter-Set testo 206-pH1: pH Meter, pH1 probe head, storage cap, protective cover TopSafe, 2 x 250 ml calibration bottles (pH 4 and 7) belt and wall holder, aluminium case

Specifications
pH range: Resolution: Accuracy:	0 ... 14 0.01 0.02 ±1 digit
pH calibration points:	1 ... 3 points
Operating temperature:	0 ... 60 °C
Dimensions (W x D x H):	33 x 20 x 197 mm (with sensor and TopSafe)
Power supply:	Incl. 1 x CR2032
Specifications
Temperature range:	0 ... 60 °C (short-term to 80 °C max. 5 min)
Resolution:	0.1 °C
Accuracy:	± 0.4 °C ± 1 digit
Weight:	69 g

Accessories Replacement probes for pH meters 205/206 Accessories Accessories for testo 205/206

The testo 206 series is ideally suited for applications in liquid and semi-solid media, especially in the food sector. The instruments stand out due to the combination of a pH immersion probe and a temperature probe for precise and fast temperature compensation. Thanks to the large volume of gel electrolyte and the dual wall diaphragm, the probe is leak-proof, maintenance-free, robust and insensitive to dirt. The protective cover TopSafe provides the instruments with the protection class IP 68.

• Built-in temperature sensor
• Maintenance-free gel electrolyte
• Robust, waterproof and dishwasher-safe protective cover
• Automatic final value recognition (Auto-hold)
• Two-line LCD display

Ideally suited for pH measurement in semi-solid and protein-rich foods such as jellies, creams, cheese, fruits etc.

Scope of supply:
testo 206-pH2: pH Meter, pH2 probe head, storage cap, protective cover TopSafe, belt and wall holder
Starter-Set testo 206-pH2: pH Meter, pH2 probe head, storage cap, protective cover TopSafe, 2 x 250 ml calibration bottles (pH 4 and 7), belt and wall holder, aluminium case

Specifications
pH range: Resolution: Accuracy:	0 ... 14 0.01 0.02 ±1 digit
pH calibration points:	1 ... 3 points
Operating temperature:	0 ... 60 °C
Dimensions (W x D x H):	33 x 20 x 197 mm (with sensor and TopSafe)
Power supply:	Incl. 1 x CR2032
Specifications
Temperature range:	0 ... 60 °C (short-term to 80 °C, max. 5 min)
Resolution:	0.1 °C
Accuracy:	± 0.4 °C ± 1 digit
Weight:	62 g

Accessories Replacement probes for pH meters 205/206 Accessories Accessories for testo 205/206