Circles and sheets. Qualitative. Slightly thicker and more retentive than number 1.

Circles. Qualitative. General purpose schools grade, creped.

Circles. Qualitative. Fast flowrate. Excellent retention of coarse and gelatinous precipitants. Smooth. Supplied in packs of circles as outlined below.

Medium fast, 4 - 7 µm.

• time saving, because folded filters have a larger surface area
• filter faster than comparable circular filters
• for medium to fine precipitates and general laboratory work
• Weight: 68 g/m²
• Thickness: 0.15 mm

Glass microfibre filters have a fast filtration and a high loading capacity and particle retention rate. Manufactured without chemical binder from high grade borosilicate glass. (Exception: GF6, GF9). They are suitable for gravity or low suction filtration. Filtration speeds generally very much higher than conventional cellulose papers. Efficient retention of micron size particles. Must be used flat. Ideal for use in flat perforated plate Buchner type funnels (not sintered glass models). Can be used up to 500 °C.
Extremely efficient filter made to retain fine particles and micro organisms. Particle retention to 1.2 µm.

The general purpose high efficiency glass microfibre filter. Particle retention to 1.6 µm.

Glass microfibre filters have a fast filtration and a high loading capacity and particle retention rate. Manufactured without chemical binder from high grade borosilicate glass. (Exception: GF6, GF9). They are suitable for gravity or low suction filtration. Filtration speeds generally very much higher than conventional cellulose papers. Efficient retention of micron size particles. Must be used flat. Ideal for use in flat perforated plate Buchner type funnels (not sintered glass models). Can be used up to 500 °C.
Three times thicker and with greater wet strength than GF/A. Particle retention to 1µm.

Glass microfibre filters have a fast filtration and a high loading capacity and particle retention rate. Manufactured without chemical binder from high grade borosilicate glass. (Exception: GF6, GF9). They are suitable for gravity or low suction filtration. Filtration speeds generally very much higher than conventional cellulose papers. Efficient retention of micron size particles. Must be used flat. Ideal for use in flat perforated plate Buchner type funnels (not sintered glass models). Can be used up to 500 °C.
This ultra-fine filter has a 98 % retention efficiency for particles as small as 0.7 µm in liquids. Particle retention to 0.7 µm.

Syringe filters are suitable for rapid sample filtration and are used in a variety of applications, such as capillary electrophoresis, protein filtration, and UV spectroscopy sample preparation. With female Luer lock inlet.

For the ready-to-use filter units, only virgin raw material is used. This ensures that there is no interaction with the sample to be filtered, provided that the units are used properly. The filter units are intended for laboratory use only.

Note: If syringes with a volume <10 ml are used, a pressure could be created which exceeds the max. operating pressure (700 kPa/7 bar) of the filter unit.
Hydrophilic membrane made of cellulose acetate (CA). Very low protein binding capacity.

• Housing made of PC
• Outlet male Luer cone
• Autoclavable at 121 °C

Fast 12 to 25µm
Black ribbon

• for coarse, high volume precipitates
• for determinations according to the German Standard Methods for the examination of water, waste water and sludge.
• most frequently used quantitative filter
• Weight: 80g/m²
• Thickness: 0.19mm

Circles and sheets. Qualitative. The most widely used grade of filter paper.

Very slow, <2 µm

• thick filter paper
• for fine precipitates
• Weight: 85g/m²
• Thickness: 0.15mm

Medium fast 4 to 7µm

• thin filter paper
• for medium to fine precipitates and general laboratory work
• Weight: 68g/m²
• Thickness: 0.150mm

Slow < 2 µm. Blue ribbon.

• for very fine precipitates and small particles
• for soil analysis
• for BaSO₄ (hot precipitate), PbSo₄, Cu₂O, ZnS, NiS
• Weight: 84 g/m²
• Thickness: 0.16 mm

Glass microfibre filters have a fast filtration and a high loading capacity and particle retention rate. Manufactured without chemical binder from high grade borosilicate glass. (Exception: GF6, GF9). They are suitable for gravity or low suction filtration. Filtration speeds generally very much higher than conventional cellulose papers. Efficient retention of micron size particles. Must be used flat. Ideal for use in flat perforated plate Buchner type funnels (not sintered glass models). Can be used up to 500 °C.
Thick filter made from less fibres and retaining around 3µm particles with a very high loading capacity. Extremely high speed. Particle retention to 2.7µm.

Ideal for weighing and transporting all types of sample. Especially for determination of nitrogen according to Kjeldahl (e.g. determination of total protein content in foodstuff). Made of nitrogen-free parchment paper. Can be dropped into the Kjeldahl flask and be dissolved together with the sample.

Applications:

• Excellent for gravimetrical analysis
• Especially for aqueous solutions
• Ideally suitable for contamination test

• Economical
• Constant weight
• Hydrophilic
• Not sterile
• Can be used up to 125 °C
• Autoclavable up to 121 °C

Ashless. For filtration of coarse and gelatinous precipitates.

Medium fast, 4 - 7µm

• time saving, because folded filters have a larger surface area
• for medium to fine precipitates
• Weight: 85 g/m²

Circles. Quantitative. Ashless. For filtration of fine precipitates.

Qualitative. Folded (pre-pleated) version of Number 2.

Slow < 2µm

• thick filter paper
• for fine precipitates
• Weight: 84g/m²
• Thickness: 0.16mm