LABSOLUTE® microscope slides made of soda-lime glass comply with DIN ISO 8037-1 and 8037-2. This means they are the ideal solution for excellent and reproducible microscopy results. The microscope slides, measuring approx. 76 x 26 mm, have a thickness of around 1 mm and are delivered pre-cleaned and ready for use. The 20 mm wide, coloured or colourless frosted area is at one end on one side.

Cut microscope slides are particularly economical and therefore represent an excellent alternative to the ground versions, for routine tasks. The corners and edges are 90° for all cut microscope slides.

Aksesuarlar Cover glasses, thickness 1 (0.13 - 0.16 mm) Aksesuarlar Microscope slide folders, cardboard Aksesuarlar Microscope slide boxes, PS Aksesuarlar Staining jar acc. to Coplin Aksesuarlar Slide mailers Aksesuarlar Slide dispenser Alternatif Microscope slides, ground edges Alternatif Adhesion slides for tissue sections

The powder-free LABSOLUTE® disposable gloves nitrile GREEN are flat with a rolled cuff and offer excellent elasticity and wearing comfort. The gloves have textured finger tips.

They are extremly skin-friendly, because they are free from chlorine and natural rubber proteins. The gloves use less water, energy and carbon dioxide during the production process as similar disposable gloves making these gloves a more sustainable option.

The LABSOLUTE® nitrile gloves with an AQL value of 1.5 comply with the following standards and directives

- EN 420, EN ISO 374-1, -2, -4, -5 and EN 16523-1

• (EU) 2016/425 (PPE in accordance with CE category III for complex risks)
• 1935/2004 (can be used in direct contact with food)
• ASTM 1671 / ISO 16604 (viral penetration)

Further properties:

• Resistance against ethidium bromide (1 %) for more than 480 min (level 6)
• Delivered in handy dispenser boxes of 200 (S, M, L) or 180 pieces (XL)
• Free from phthalates, softeners and allergenic latex proteins
• Free from rubber accelerators
• Storage life: 3 years
• Length: approx. 240 mm
• Thickness (double): finger min. 0.14 mm, palm min. 0.12 mm, cuff min. 0.10 mm
• Easy to don thanks to a synthetic inner coating
• Can be worn on the left or right hand

Aksesuarlar Holder for glove boxes, stainless steel Alternatif Disposable gloves, nitrile Protective, powder-free Alternatif Disposable gloves, latex, powder-free Alternatif Disposable gloves, nitrile Sensitive, powder-free

Crimp seals ND11 are made of aluminium. They are clear or lacquered in different colours and have a 5.5 mm hole. They are supplied with fitted septa made of a variety of materials.

These septa are temperature-resistant from -40 °C to 120 °C and ideal for multiple injections thanks to their excellent resealability properties.

Septa made of natural rubber / butyl / TEF combine the good physical properties of natural rubber (resealability) and the good chemical properties of butyl (analytical cleanliness).

Aksesuarlar Crimp neck vials and micro-vials ND11, wide opening Aksesuarlar Snap ring vials and micro-vials ND11, wide opening Aksesuarlar Snap ring vials and micro-vials ND11, PMP or PP Aksesuarlar Crimping tools Aksesuarlar Decapping tools Aksesuarlar Crimping tools Aksesuarlar Decapping tools Aksesuarlar Crimping tool, pneumatic, manual Alternatif With RedRubber / PTFE septa Alternatif With butyl / PTFE septa Alternatif With silicone / PTFE septa Alternatif With aluminium septa

The absorbent paper strips are made of qualitative filter paper. They are suited to absorb excess fluids such as staining solutions for microscope specimens.

The sporty safety spectacles from LABSOLUTE® comply with EN 166 and EN 170. They match even the strictest regulations in terms of occupational protection and safety. The lenses of all spectacle models are made of high-quality polycarbonate UV 2 - 1,2. Special coating of the crystal-clear lens guarantees a scratch-proof and permanent non-fogging viewing surface. Innovative technologies and ultra-modern materials also ensure an excellent fit, distortion-free vision and 100 % UV protection - for, quite simply, comfort of the highest order.

Occupational safety and comfort of the highest order - and all for a weight of just 21 grams. LABSOLUTE® light combines innovative technology with ultra-modern materials to create sensationally lightweight safety spectacles.

Innovative concept for high levels of acceptance among users

• Extremely lightweight safety spectacles
• Sporty design
• Excellent comfort and secure grip thanks to a perfect fit and soft plastic on the arm ends

The LABSOLUTE® cryo boxes are made of cold-resistant cardboard and well suited for cryogenic temperatures.

• Temperature-resistant up to -80 °C
• Lid included
• Delivery without grid insert

Due to a water-proof plastic coating these cryo boxes are especially durable.

Aksesuarlar Grid inserts for cryo boxes Aksesuarlar Cryo labels Aksesuarlar Numbering cards, cardboard Aksesuarlar Cryo tubes, PP Alternatif Cryo boxes, standard, cardboard Alternatif Cryo boxes, PC

The LABSOLUTE® range offers you a practical selection of precise chronometers which provide functions geared towards the requirements of the laboratory sector.

The LABSOLUTE® basic timer is a handy, lightweight and functional timer with a simple design.

• Dimensions (W x H x D): 50 x 69 x 8 mm
• LR-54 battery included
• Countdown function
• Four-digit display up to 99 minutes, 59 seconds
• With magnet on the back
• With power switch on the back for longer battery life

LABSOLUTE® microscope slides made of soda-lime glass comply with DIN ISO 8037-1 and 8037-2. This means they are the ideal solution for excellent and reproducible microscopy results. The microscope slides, measuring approx. 76 x 26 mm, have a thickness of around 1 mm and are delivered pre-cleaned and ready for use. The 20 mm wide, coloured or colourless frosted area is at one end on one side.

The ground version of the slides is used to avoid cutting injuries or glass breakages during automated processing. Microscope slides have corners with either 45° or 90°. The edges are 90° for all ground microscope slides.

Aksesuarlar Cover glasses, thickness 1 (0.13 - 0.16 mm) Aksesuarlar Microscope slide folders, cardboard Aksesuarlar Microscope slide boxes, PS Aksesuarlar Staining jar acc. to Coplin Aksesuarlar Slide mailers Aksesuarlar Slide dispenser Alternatif Microscope slides, cut edges Alternatif Adhesion slides for tissue sections

Crimp seals ND11 are made of aluminium. They are clear or lacquered in different colours and have a 5.5 mm hole. They are supplied with fitted septa made of a variety of materials.

These septa are temperature-resistant from -60 °C to 200 °C and have a better purity than septa made of natural rubber or red rubber. However, they have less effective resealability properties and are therefore more suitable for single-injection applications.

Septa with a double-sided PTFE coating show a very low particle formation during penetration.

The magnetic seals are suitable for CTC PAL and Thermo Scientific TriPlus autosampler.

Aksesuarlar Crimp neck vials and micro-vials ND11, wide opening Aksesuarlar Snap ring vials and micro-vials ND11, wide opening Aksesuarlar Snap ring vials and micro-vials ND11, PMP or PP Aksesuarlar Crimping tools Aksesuarlar Decapping tools Aksesuarlar Crimping tools Aksesuarlar Decapping tools Aksesuarlar Crimping tool, pneumatic, manual Alternatif With natural rubber / TEF septa Alternatif With RedRubber / PTFE septa Alternatif With butyl / PTFE septa Alternatif With aluminium septa

The serological pipettes from LABSOLUTE® are ideal for working with sterile solutions in the millilitre range and applications in cell culture.

• Free of DNase, RNase and pyrogens
• Non-cytotoxic
• Quick and easy identification by colour coding
• Gamma sterilized (SAL 10^-6)

The standard serological pipettes from LABSOLUTE® are individually packaged in an easy-to-open paper/plastic blister.

Aksesuarlar Pipette controller Aksesuarlar Safety pipette fillers, natural rubber Alternatif Serological pipettes, short version, sterile, PS Alternatif  Alternatif Serological pipettes, sterile, PS, bulk Alternatif Demeter pipettes, sterile, PS Alternatif Graduated pipettes, class AS, type 3, amber graduation

The LABSOLUTE® disposable cuvettes for the VIS and UV range feature optimised photometric properties and high transparence thanks to modern manufacturing methods. Furthermore, you benefit from the fact that all cuvettes within one packing unit are sorted according to their numbered cavities of origin. Consequently, you receive technically identical cuvettes which prevent deviations in extinction coefficient values. Supplied in practical, reclosable styrofoam racks.

• Increased heat transfer thanks to optimized form and small wall thickness
• Recessed measuring fields: reduce risk of scratching by the cuvette holder
• Arrow marker points to transmission direction
• Path length: 10 mm
• Outer dimensions (W x H x D): 12.5 x 45 x 12.5 mm

Alternatif Disposable cuvettes for the UV range

The LABSOLUTE® micro tubes are made of high-quality PP and are resistant to mechanical and chemical stress. Simple and safe opening and closing of the vessel allow safe handling for greater comfort.

• Free of DNase, RNase and pyrogens
• Non-sterile
• Guaranteed metal-free
• Precise graduations lines on 1.5 and 2.0 ml reaction vessels
• Puncturable cap
• Matted cap with labelling field
• Can be centrifuged up to 25000 x g (1.5 and 2.0 ml) and 20000 x g (0.5 ml)
• Autoclavable at 121 °C

Aksesuarlar Racks for micro tubes, 80 wells, PP Aksesuarlar Floating racks, 16 or 20 wells, PP Aksesuarlar Universal racks for different tube sizes, PP Aksesuarlar Rack for micro tubes, 20 wells, PP Alternatif Safe seal micro tubes, PP Alternatif Micro tube with flip cap, PP

Crimp neck vials and micro-vials ND11 made of clear and amber first hydrolytic class glass are used as standard in GC and HPLC. A large selection of micro-inserts is available for these vials.

Aksesuarlar Micro-inserts for vials with wide opening, glass Aksesuarlar Vial racks, acrylic Aksesuarlar Vial racks, PP Aksesuarlar ND8, ND9, ND10, ND11 - 81 positions Aksesuarlar With natural rubber / TEF septa Aksesuarlar With RedRubber / PTFE septa Aksesuarlar With butyl / PTFE septa Aksesuarlar With silicone / PTFE septa Aksesuarlar With aluminium septa Alternatif Snap ring vials and micro-vials ND11, wide opening Alternatif Snap ring vials and micro-vials ND11, PMP or PP Alternatif Screw neck vials and micro-vials ND8, small opening Alternatif Short thread vials and micro-vials ND9, wide opening Alternatif Screw neck vials and micro-vials ND10, wide opening Alternatif Kits ND11, crimp neck Alternatif Vase vials Alternatif Vials with directly closable micro-insert

The LABSOLUTE® sample dishes made of high-grade aluminium are perfectly suited for moisture analysis.

With the autoclavable bags made of PP, you can dispose of your contaminated labware. Thanks to the strong PP film (50 µm) and an extra broad seam at the bottom, the bags are particularly tear-resistant. The bag size 200 x 300 mm is delivered for both versions in a handy dispenser box.

Autoclavable up to 134 °C. For autoclaving, the bags must only be slightly closed.

Aksesuarlar Holder for disposal bags Alternatif Disposal bags, highly transparent, PP

The LABSOLUTE® cover glasses made of highly resistant borosilicate glass 3.3 of the first hydrolytic class are the perfect addition to every microscopy system. They are guaranteed free of contamination, bubbles or smears and comply with DIN ISO 8255-1 and 8255-2. The cover glasses are supplied in especially handy and secure boxes.

Aksesuarlar Microscope slides, ground edges Aksesuarlar Microscope slides, cut edges Aksesuarlar Adhesion slides for tissue sections

The LABSOLUTE® sample bags are made from tear-proof, transparent LDPE and have a common but safe pressure seal.

With labelling field for fast and clear marking.

Alternatif Pressure seal bags, euro hole, LDPE

The practical LABSOLUTE® wide-mouth bottles made of LDPE, HDPE or PP are particularly easy to fill and clean due to their wide opening. With 100 % tightly closing screw lids made of PP, they are ideal for shipping and storing liquid, powdery and paste-like samples.

Lids are seperate.

Alternatif Wide-mouth bottles, natural, HDPE

The practical LABSOLUTE® wide-mouth bottles made of LDPE, HDPE or PP are particularly easy to fill and clean due to their wide opening. With 100 % tightly closing screw lids made of PP, they are ideal for shipping and storing liquid, powdery and paste-like samples.

Alternatif Wide-mouth bottles, natural, LDPE Alternatif Wide-mouth bottles, amber, HDPE Alternatif Wide-mouth bottles, natural, PP Alternatif Narrow-mouth bottles, natural, HDPE

LABSOLUTE® microscope slides made of soda-lime glass comply with DIN ISO 8037-1 and 8037-2. This means they are the ideal solution for excellent and reproducible microscopy results. The microscope slides, measuring approx. 76 x 26 mm, have a thickness of around 1 mm and are delivered pre-cleaned and ready for use. The 20 mm wide, coloured or colourless frosted area is at one end on one side.

Adhesion slides ensure quicker flatness and better adhesion of the samples. The microscope slides with a white frosted area and ground edges are supplied in shrink-wrapped plastic boxes of 72 pieces. The angle of the edges and corners for both items is 90°.

Aksesuarlar Cover glasses, thickness 1 (0.13 - 0.16 mm) Aksesuarlar Microscope slide folders, cardboard Aksesuarlar Microscope slide boxes, PS Aksesuarlar Staining jar acc. to Coplin Aksesuarlar Slide mailers Aksesuarlar Slide dispenser Alternatif Microscope slides, ground edges Alternatif Microscope slides, cut edges

The calibration vessel, integrated into the CHEMSOLUTE® twin neck dispensing bottles, allows the particularly economical dispensing of solution and prevents contamination.

- Accuracy ±0.01 pH units, reference temperature 20 °C

• Traceable to the National Institute of Standards and Technology (NIST)
• The dyed buffer solutions allow easy identification

LABSOLUTE® offers a comprehensive range in the field of PCR consumables. These include tubes, strips of 8 tubes, 96-well plates and sealing films. In addition to the standard profile variants with 0.2 ml working volume, we also offer some low-profile versions with a working volume of 0.1 ml in the case of strips and plates.

• Suitable for all common thermal cyclers
• Optimal heat transfer and short cycle times through very thin and uniform wall thickness

Self-adhesive foils for safe sealing of 96-well PCR plates from LABSOLUTE® are free from human DNA and RNA, nucleases and pyrogens.

PCR adhesive foil: Polyester film with an acrylic-based adhesive, which is suitable for PCR, qPCR and other colorimetric assays, but has a low autofluorescence.

Cover and storage foil: PP foil with acrylic-based adhesive for universal closing of 96-well plates. Reliably protects the samples against evaporation and dust; removable, non-pierceable.

PCR and storage foil: The 20 µm thick aluminium foil with acrylic-based adhesive is easily pierceable without sticking the pipette tips or creating a vacuum.

qPCR adhesive foil: This qPCR foil is specially developed for qPCR applications. The pressure-sensitive adhesive is only released when the film comes into contact with the raised rims of the individual wells, thereby ensuring reliable sealing with high transparency and minimal autofluorescence.

Aksesuarlar PCR 96-well plates, PP

LABSOLUTE® offers a comprehensive range of syringe filters that have been developed especially for the efficient filtration of aqueous and organic solutions and for ventilation. The choice of different housing diameters, membrane types and pore sizes offers the ideal solution for your applications. Intensive quality checks ensure consistently high quality, both of the membrane material and the filter unit as a whole, for all of the filters we supply.

• Made without the use of adhesives: the housing and membrane are welded
• Sterile versions: 100 % sterility thanks to gamma radiation
• Equipped with Luer connections
• The filters are printed, both with the membrane type and the pore size, excluding the possibility of confusion

SETUP

The syringe filters have either acrylic or PP housing. Both housing versions have Luer connections, and the membrane is secured in the housing so that the sample fluid cannot flow around the membrane.

LABSOLUTE® syringe filters with a filter membrane diameter of 25 mm are ideal for the preparation of samples with a volume from 1.5 ml to 100 ml. The effective filtration area is 4.6 cm². This, in combination with the stable housing pressure resistant to 5 bar made from polypropylene (transparent) or acrylic (pore size 0.22 µm blue or pore size 0.45 µm yellow), ensures rapid filtration. The non-sterile filters are packed in quantities of 500 in polypropylene pouches, while sterile filters are packaged individually in blisters in quantities of 50 per box.

Properties:

• Housing diameter 33 mm
• Membrane diameter 25 mm (surface 4.6 cm²)
• Low content of extractable substances
• Low dead volume

Aksesuarlar Disposable syringes, Luer slip, non-sterile, PP Aksesuarlar Disposable syringes, Luer lock, non-sterile, PP Alternatif Syringe filters 13 mm Alternatif Syringe filters, ProFill, 17 mm Alternatif Syringe filters, ProFill, 25 mm Alternatif Syringe filters, ProFill, 30 mm

The LABSOLUTE® Erlenmeyer flasks with a durable volume scale are made of high-quality borosilicate glass 3.3 and are therefore extremely temperature-resistant up to 500 °C. The wide-neck and narrow-neck flasks, as well as the flasks with standard ground joint comply with the valid standards. The flasks are resistant to cold lyes/alkaline solutions and strong acids, with the exception of hydrofluoric acid and hot, concentrated phosphoric acid.

Comply with DIN EN ISO 24450.

Alternatif Erlenmeyer flasks, narrow-neck, borosilicate glass 3.3 Alternatif Erlenmeyer flasks, with standard ground joint, borosilicate glass 3.3

LABSOLUTE® beakers with durable volume scale and spout are made of high-quality borosilicate glass 3.3 and are therefore extremely temperature-resistant up to 500 °C. The beakers in low and high form comply with DIN 12331 and ISO 3819. They are resistant to cold lyes/alkaline solutions and strong acids, with the exception of hydrofluoric acid and hot, concentrated phosphoric acid.

Alternatif Beakers, high form, borosilicate glass 3.3

The LABSOLUTE® 5 ml micro tubes with attached snap-on cap are ideal for working with volumes up to 5 ml. For incubations above 80 °C, it is recommended to close the tube with the clip (7.696 749).

• Low binding variant for maximum sample recovery
• Amber vessels are ideal for lightsensitive materials
• Free from DNase, RNase and pyrogens
• Centrifugation up to 20000 x g
• Cold-resistant up to -86 ° C
• Autoclavable

Aksesuarlar Tube rack for 5 ml micro tubes, white, PS Aksesuarlar Cryo boxes for 5 ml micro tubes, PC Aksesuarlar Mini coolers -20 °C, PC

The qualitative filter papers are manufactured from pure cellulose with a proportion of alpha-cellulose of almost 100 %. The ash content is about 0.06 %.

Grade 2020, medium to slow filtering, particle retention 5-13 µm, filtration speed 88 s according to DIN 53137, basis weight 73 g/m², thickness 0.16 mm

For fast filtration with fine particles for general, electrolytic application in schools, research, health care, food and cosmetics industry.

Alternatif Folded filters, qualitative, grade 2020

LABSOLUTE® Pasteur pipettes guarantee a comfortable and safe handling of fluids. Due to the constant drop volume the transfer pipettes are perfectly suited to aliquot larger volumes of liquids. The soft suction ball and precisely finished tip guarantee pleasant, clean working.

• Made from transparent LDPE
• Suitable for food analyses
• Free of BSE

Alternatif Pasteur pipettes, soda-lime glass

The glass fibre filters from LABSOLUTE® are made of borosilicate glass without binder and are thus biologically inert. The filters provide a high retention power and simultaneously enable elevated flow rates, which makes them applicable for almost every area of laboratory filtration. Among other things, they are used for clarification of protein solutions, air or water monitoring and for gravimetric and waste water analyses. Furthermore, they can be ideally used as prefilters for membranes.

• Very high resistance to almost all kinds of chemicals
• Temperature-resistant up to 500 °C
• Autoclavable up to 134 °C

- Particle retention: 1.6 µm

• Thickness: 0.26 mm
• Weight: 52 g/m²

Aksesuarlar Buchner funnels, porcelain Alternatif Micro glass fibre filters, slow filtering Alternatif Micro glass fibre filters, medium fast filtering

With the autoclavable bags made of PP, you can dispose of your contaminated labware. Thanks to the strong PP film (50 µm) and an extra broad seam at the bottom, the bags are particularly tear-resistant. The bag size 200 x 300 mm is delivered for both versions in a handy dispenser box.

Autoclavable at 121 °C. For autoclaving, the bags must only be slightly closed. Highly transparent.

Aksesuarlar Holder for disposal bags Alternatif Disposal bags, standard, PP

The LABSOLUTE® sample bags are made from tear-proof, transparent LDPE and have a common but safe pressure seal.

With euro hole for easy hang up.

Alternatif Pressure seal bags, labelling field, LDPE

LABSOLUTE® stackable cryo boxes in various designs, colours and sizes offer a handy and space-saving system for storing samples.

• Made of high-quality PC, suitable for temperatures between -196 °C and 121 °C
• Autoclavable at 121 °C for 20 minutes
• Stackable
• Lids and inserts at the top with 45°-angled corners for easier closing
• Transparent lid with white grid sectioning and numbering
• Various versions, sizes and colours available

Aksesuarlar Cryo tubes, PP Alternatif Cryo boxes, standard, cardboard Alternatif Cryo boxes, plastic coated, cardboard

The practical LABSOLUTE® wide-mouth bottles made of LDPE, HDPE or PP are particularly easy to fill and clean due to their wide opening. With 100 % tightly closing screw lids made of PP, they are ideal for shipping and storing liquid, powdery and paste-like samples.

Alternatif Wide-mouth bottles, natural, HDPE Alternatif Wide-mouth bottles, amber, HDPE Alternatif Wide-mouth bottles, natural, PP Alternatif Narrow-mouth bottles, natural, LDPE

The LABSOLUTE® mortars are made of high-quality porcelain and comply with DIN 12906. They are temperature resistant up to 1,000 °C. The inner surface and base are unglazed. The rough pounding surface leads to the best possible grinding result.

Aksesuarlar Pestles, porcelain

The LABSOLUTE® conical gaskets made of grey natural rubber are the ideal seal between a filter flask and a Buchner funnel. The gaskets are available indiviually in eight different sizes with a bottom diameter between 12 - 66 mm or in a useful set.

Aksesuarlar Buchner funnels, porcelain Aksesuarlar Filter flasks, with glass olive, borosilicate glass 3.3 Alternatif Rubber gasket set

The LABSOLUTE® Erlenmeyer flasks with a durable volume scale are made of high-quality borosilicate glass 3.3 and are therefore extremely temperature-resistant up to 500 °C. The wide-neck and narrow-neck flasks, as well as the flasks with standard ground joint comply with the valid standards. The flasks are resistant to cold lyes/alkaline solutions and strong acids, with the exception of hydrofluoric acid and hot, concentrated phosphoric acid.

Comply with ISO 1773.

Alternatif Erlenmeyer flasks, wide-neck, borosilicate glass 3.3 Alternatif Erlenmeyer flasks, with standard ground joint, borosilicate glass 3.3

The white LABSOLUTE® lab coat is made of 100 % cotton fabric with a weight of 305 g/m². It features a lapel collar, two patch pockets, a breast pocket, and a concealed placket. The long-sleeved coat is suitable for all kind of standard laboratory application. Due to its UPF 50+ function it keeps off more than 98 % of the ultraviolet rays. Our comfortable LABSOLUTE® lab coat is available in women's cut from XS to 2XL size, as well as in men's cut from S to 4XL size. The individual embroidery of the lab coat with personal lettering or the company logo is available on request.

The LABSOLUTE® tubes have very good thermal, mechanical and chemical stability and are made of high-quality PP (equivalent to US pharmacopoeia USP Class VI). Caps are made of PE.


- Centrifugation: conical up to 16000 x g and with rim up to 3000 x g

• Free from DNase and RNase
• Endotoxin level: <0.5 EU/ml
• Sterile goods are gamma-sterilized (SAL 10^-6)
• Available in bags (25 pcs/bag) or racks (15 ml tubes: 50 pcs/rack, 50 ml tubes: 25 pcs/rack)

Aksesuarlar Cryo boxes for 50 ml and 15 ml centrifuge tubes, cardboard Aksesuarlar Boxes for centrifuge tubes, PP Aksesuarlar Universal racks for different tube sizes, PP Aksesuarlar Racks for 15 ml centrifuge tubes, PA Aksesuarlar Racks for 50 ml centrifuge tubes, PA

The glass fibre filters from LABSOLUTE® are made of borosilicate glass without binder and are thus biologically inert. The filters provide a high retention power and simultaneously enable elevated flow rates, which makes them applicable for almost every area of laboratory filtration. Among other things, they are used for clarification of protein solutions, air or water monitoring and for gravimetric and waste water analyses. Furthermore, they can be ideally used as prefilters for membranes.

• Very high resistance to almost all kinds of chemicals
• Temperature-resistant up to 500 °C
• Autoclavable up to 134 °C

- Particle retention: 1.2 µm

• Thickness: 0.26 mm
• Weight: 53 g/m²

Aksesuarlar Buchner funnels, porcelain Alternatif Micro glass fibre filters, slow filtering Alternatif Micro glass fibre filters, fast filtering

The qualitative filter papers are manufactured from pure cellulose with a proportion of alpha-cellulose of almost 100 %. The ash content is about 0.06 %.

Grade 2020, medium to slow filtering, particle retention 5-13 µm, filtration speed 88 s according to DIN 53137, basis weight 73 g/m², thickness 0.16 mm

For fast filtration with fine particles for general, electrolytic application in schools, research, health care, food and cosmetics industry.

Alternatif Circles, qualitative, grade 2020

The LABSOLUTE® pestles are made of high-quality porcelain and comply with DIN 12906. They are temperature resistant up to 1,000 °C. The pestles have an unglazed head and a glazed handle as well as a rough pounding surface.

Aksesuarlar Mortars, porcelain

The cylindrical LABSOLUTE® magnetic stirring bars have a smooth surface. The PTFE coating makes them particularly resistant to chemicals and temperatures.

Aksesuarlar Stirring bar retrievers, PTFE Alternatif Set of magnetic stirring bars, cylindrical, 10 pieces, PTFE

The LABSOLUTE® extraction thimbles are made of 100 % cellulose. They have a high mechanical stability and are free from binders. The extraction thimbles have a wall thickness of about 1 mm and a pore size of approximately 5 µm. They are perfect for all kind of Soxhlet extractions as well as for the separation of liquid and solid particles out of air and gases.

The automatic LABSOLUTE® burettes according to Dr. Schilling can be used for several applications in many areas, such as electroplating, water treatment or sewage plants. They are impressing through their precise dosing, the possibility of fine titration and an exact draining tip. The class B burettes are justified to "Ex" and come with a LDPE bottle and solid stand. The tolerances comply with DIN EN ISO 385. There is a Schellbach stripe on the backside of the burettes that makes it easier to read the exact filling level. The bottle and the burette are fixed together by the titrating armature.

The burettes are delivered dismantled, but can be easily installed without additional tools.

On request, the burettes can also be offered with a plastic coating for better shatter protection at an extra charge.

Alternatif Burettes, straight stopcock, class AS Alternatif Burettes, lateral stopcock, class AS

The LABSOLUTE® cryo tubes are designed for optimal storage and preservation of biological sample materials in the gas phase of liquid nitrogen or in deep-freeze devices. The cryo tubes are produced under clean room conditions as defined by ISO 14644-1 Class 8 and US FED STD 209 Class 100000 from high-quality PP.

The integrated sealing surface of the screw caps made of HDPE is innovative and particularly practical. Leaks from the cryo tubes are therefore 100 % excluded - incorrectly positioned O-rings are a thing of the past.

The cryo tubes are available in various sizes and with inner and outer threads.

• Certified sterility through beta irradiation (SAL 10^-6)
• Free from human DNA, RNase, DNase, ATP and pyrogens
• Large labelling field
• Simple removal and secure storage: supplied in a handy dispenser box with 10 resealable pouches of 50 cryo tubes

Aksesuarlar Cryo boxes, PC Aksesuarlar Cryo boxes, standard, cardboard Aksesuarlar Cryo boxes, plastic coated, cardboard Aksesuarlar Grid inserts for cryo boxes Aksesuarlar Mini cooler 0 °C, PC Aksesuarlar Mini coolers -20 °C, PC Aksesuarlar Precision Freeze Aksesuarlar Quick Freeze, PC Aksesuarlar Coloured cap inserts Aksesuarlar Cryo racks

Crimp seals ND11 are made of aluminium. They are clear or lacquered in different colours and have a 5.5 mm hole. They are supplied with fitted septa made of a variety of materials.

These septa with instrument manufacturer's quality are temperature-resistant from -40 °C to 110 °C. They are easier to penetrate and have lower particle formation than septa made of natural rubber.

Aksesuarlar Crimp neck vials and micro-vials ND11, wide opening Aksesuarlar Snap ring vials and micro-vials ND11, wide opening Aksesuarlar Snap ring vials and micro-vials ND11, PMP or PP Aksesuarlar Crimping tools Aksesuarlar Decapping tools Aksesuarlar Crimping tools Aksesuarlar Decapping tools Aksesuarlar Crimping tool, pneumatic, manual Alternatif With natural rubber / TEF septa Alternatif With butyl / PTFE septa Alternatif With silicone / PTFE septa Alternatif With aluminium septa

The ready-to-use buffer solutions from CHEMSOLUTE® are renowned for their quality and ease of use.

- Accuracy ±0.02 pH units, reference temperature 20 °C

• Traceable to the National Institute of Standards and Technology (NIST)
• In PP bottles
• The dyed buffer solutions allow easy identification

The LABSOLUTE® stirring bar retrievers in the lengths of 150, 250 and 350 mm are suitable for removing magnetic stirring bars from vessels of all kinds. They have a strong permanent magnet (Alnico 5) with a 10 mm diameter. Due to the PTFE coating the stirring bar retrievers are particularly resistant to chemicals and temperatures.

Aksesuarlar Magnetic stirring bars, cylindrical, PTFE Aksesuarlar Set of magnetic stirring bars, cylindrical, 10 pieces, PTFE

LABSOLUTE® offers a comprehensive range in the field of PCR consumables. These include tubes, strips of 8 tubes, 96-well plates and sealing films. In addition to the standard profile variants with 0.2 ml working volume, we also offer some low-profile versions with a working volume of 0.1 ml in the case of strips and plates.

• Suitable for all common thermal cyclers
• Optimal heat transfer and short cycle times through very thin and uniform wall thickness

The LABSOLUTE® 96-well PCR plates offer optimum heat transfer between the thermal cycler and the reaction mix through their extra thin and uniform vessel walls. The plates are sealable with adhesive films, heat sealing films and cover strips with flat and domed caps. The slightly raised rims of the individual wells reduce cross-contamination and evaporation of the samples. The black alphanumeric coding allows optimal sample distinction. All plates are free of DNase, RNase and human DNA.

96-well, skirted, low profile
Skirted 96-well PCR plates are rigid and suited for processing and transportation by automatic pipetting systems. Cut corner: H1.

96-well, semi-skirted
96-well semi-skirted PCR plates can be easily labelled or tagged with a barcode. Cut corner: A12.

96-well, for Roche® LightCycler® 480
The plates are perfect for use in LC480. Homogeneous white coloration with titanium dioxide and a smooth surface reduce interfering autofluorescence signals. Cut corner: H12.

96-well, non-skirted
96-well non-skirted PCR plates are suitable for a broad spectrum of thermal cyclers. Cut corner: H12.

Aksesuarlar PCR adhesive foils Aksesuarlar  Alternatif PCR tubes 0.2 ml, PP Alternatif PCR cap strips, PP

The glass fibre filters from LABSOLUTE® are made of borosilicate glass without binder and are thus biologically inert. The filters provide a high retention power and simultaneously enable elevated flow rates, which makes them applicable for almost every area of laboratory filtration. Among other things, they are used for clarification of protein solutions, air or water monitoring and for gravimetric and waste water analyses. Furthermore, they can be ideally used as prefilters for membranes.

• Very high resistance to almost all kinds of chemicals
• Temperature-resistant up to 500 °C
• Autoclavable up to 134 °C

- Particle retention: 0.7 µm

• Thickness: 0.45 mm
• Weight: 75 g/m²

Aksesuarlar Buchner funnels, porcelain Alternatif Micro glass fibre filters, medium fast filtering Alternatif Micro glass fibre filters, fast filtering

The practical LABSOLUTE® wide-mouth bottles made of LDPE, HDPE or PP are particularly easy to fill and clean due to their wide opening. With 100 % tightly closing screw lids made of PP, they are ideal for shipping and storing liquid, powdery and paste-like samples.

Autoclavable at 121 °C.

Alternatif Wide-mouth bottles, natural, LDPE Alternatif Wide-mouth bottles, natural, HDPE Alternatif Wide-mouth bottles, amber, HDPE Alternatif Narrow-mouth bottles, natural, PP

The set of LABSOLUTE® magnetic stirring bars is a perfect assortment of the most common sizes for almost all applications. The cylindrical, smooth, PTFE-coated stirring bars come in a solid box with a transparent, hinged lid.

The set consists of the following 10 stirring bars: 1x 15 x 6 mm, 2x 20 x 7 mm, 2x 25 x 7 mm, 1x 30 x 7 mm, 2x 40 x 7 mm, 1x 50 x 7 mm and 1x 60 x 7 mm.

Aksesuarlar Stirring bar retrievers, PTFE Alternatif Magnetic stirring bars, cylindrical, PTFE

LABSOLUTE® laboratory bottles are made of high-quality borosilicate glass 3.3 and are therefore extremely temperature-resistant up to 500 °C. They comply with EN ISO standard 4796-1. The bottles have a retrace code, a durable volume scale as well as a GL45 thread (GL32 thread for 50 ml bottles). The bottles as well as the closures are resistant against a wide range of chemicals.

With blue pouring rings and screw caps made of PP with integrated lip seal. Autoclavable at 121 °C.

Aksesuarlar Screw caps, PP Aksesuarlar Pouring rings, PP Aksesuarlar Pouring rings and screw caps, PBT Alternatif Laboratory bottles, clear, with PBT screw caps Alternatif Laboratory bottles, amber, with PP screw caps

The LABSOLUTE® weighing boats made of PS feature smooth surfaces to transfer each kind of sample easily with minimal sample loss. The material is antistatic, biologically inert and resistant to both weak and diluted acids, lyes and alcohols and to temperatures from -10 °C up to 70 °C. All dishes are food-grade compliant and can be used with microwave moisture analyzers.

The antistatic dishes feature a flat bottom for a secure stand. The round corners simplify the transfer of each kind of sample.

Alternatif Weighing boats, diamond-shaped, PS Alternatif Sample dishes with handle, aluminium Alternatif Weighing paper

The practical LABSOLUTE® wide-mouth bottles made of LDPE, HDPE or PP are particularly easy to fill and clean due to their wide opening. With 100 % tightly closing screw lids made of PP, they are ideal for shipping and storing liquid, powdery and paste-like samples.

Perfect for light-sensitive samples.

Alternatif Wide-mouth bottles, natural, LDPE Alternatif Wide-mouth bottles, natural, HDPE Alternatif Wide-mouth bottles, natural, PP Alternatif Narrow-mouth bottles, amber, HDPE

The LABSOLUTE® Buchner funnels are made of high-quality porcelain and comply with DIN 12905. They are glazed on the inside and outside and are characterized by an excellent resistance to lyes and acids with the exception of hydrofluoric acid.

Aksesuarlar Filter flasks, with glass olive, borosilicate glass 3.3 Aksesuarlar Rubber gaskets Aksesuarlar Rubber gasket set Aksesuarlar  Aksesuarlar  Aksesuarlar

The filter papers for quantitative analyses are made of 100 % cotton linters. For maximum purity the papers are acid-washed and cleaned with demineralized water. Ash content is 0.007 %.

Grade 1010, medium fast filtering, particle retention 8-12 µm, filtration speed 20 s according to DIN 53137, basis weight 84 g/m², thickness 0.17 mm

For relatively coarse-flaked precipitates (lead, iron, silver sulphides, alkali metal carbonate, lead chromate, arsenic, antimony, cadmium, foodstuffs).

Alternatif Circles, qualitative, grade 2010 Alternatif Folded filters, qualitative, grade 2010 Alternatif Circles, qualitative, wet strengthened, grade 2110 Alternatif Folded filters, qualitative, wet strengthened, grade 2110 Alternatif Circles, quantitativ, wet strengthened, grade 1110

The square LABSOLUTE® wide-mouth bottles made of HDPE are ideal to store liquid, powdery and paste-like samples. Due to their wide-opening the bottles can be easily filled. The angular shape ensures that the storage space in cupboards and drawers is used optimally.

The black lids made of PP (7.664 458) with a diameter of 60 mm and PE foam insert must be ordered separately.

The LABSOLUTE® bottle top dispenser series is impressive with its high quality and unlimited reliability in combination with a high degree of safety and user-friendliness. Exceptionally high-quality materials guarantee a long service life and superlative chemical resistance.

No compromises on quality or reliability
All wetted parts of the LABSOLUTE^® bottle top dispensers are made of PTFE, fluorinated ethylene propylene and borosilicate glass. The constant ejection volume and completely bubble-free dispensing make them the number one choice in terms of precision and reproducibility. Each of the LABSOLUTE^® dispensers comes with an individual certificate, since all devices are calibrated complying with DIN ISO 8655.

Extra security when handling liquids and maximum handling comfort

• Protection of the borosilicate dispensing cylinder with PP material
• Safety closure valve prevents uncontrolled dripping, air contact or drying out
• Free-running mechanism thanks to specially constructed PTFE piston with silicon O-ring
• Telescopic suction tube to different bottle heights
• Rapid and easily visible volume adjustment with handy adjustment screw
• Autoclavable at 121 °C

Adapters with 28, 30, 38, 40 or 45 mm thread for securing the dispensers to bottles are included in the supplied package.

The dispenser with recirculation valve allows a uniform, precise and reliable bubble-free dosing without reagent loss. The specially designed bottle adapter allows a 360° rotation of the dispenser on the mounted bottle.

Aksesuarlar Accessories for bottle top dispensers

The LABSOLUTE® mini coolers allow effective cooling of reagents and solutions. Mini coolers can be used very conveniently directly on the workbench and impress with a controllable cooling process and reproducible results.

The yellow LABSOLUTE® mini coolers -20 °C made of robust PC are filled with a non-toxic cooling gel. Pre-cool for at least 24 hours at -20 °C to -25 °C before use.

• Maintains the temperature of -20 °C for at least 1 hour

Aksesuarlar Cryo tubes, PP Aksesuarlar Micro tubes, PP Aksesuarlar Safe seal micro tubes, PP Aksesuarlar Micro tube with flip cap, PP

The LABSOLUTE® Erlenmeyer shaped filter flasks with glass olive are made of high-quality borosilicate glass 3.3 and comply with ISO 6556 and DIN 12476. Together with the LABSOLUTE® Buchner funnels and suitable rubber gaskets, they form a perfect unit for almost all kinds of filtration applications in chemical laboratories. All LABSOLUTE® filter flasks are autoclavable and, because of their high wall thickness, also vacuum-proof.

We recommend a vacuum tube with an inner diamater of 8 mm to connect the filter flasks to a vacuum pump.

Due to the glass olive, the flasks do not comply with the requirements of the German product safety law (ProdSG).

Aksesuarlar Buchner funnels, porcelain Aksesuarlar Rubber gaskets Aksesuarlar Rubber gasket set

The LABSOLUTE® containers are ideal for storing and transporting paste-like, powdery and liquid samples.

• Highly resistant to many chemicals
• Including screw lids
• Can be used in direct contact with food
• Autoclavable at 121 °C

Alternatif Sample beakers, non sterile, bulk packaging Alternatif Sample beaker graduated, PP

The serological pipettes from LABSOLUTE® are ideal for working with sterile solutions in the millilitre range and applications in cell culture.

• Free of DNase, RNase and pyrogens
• Non-cytotoxic
• Quick and easy identification by colour coding
• Gamma sterilized (SAL 10^-6)

The short version of the serological pipettes from LABSOLUTE® is with 23.5 cm significantly shorter than the normal pipette. It is specially designed for liquid handling operation in limited working space and enables a comfortable and safe working.

Aksesuarlar Safety pipette fillers, natural rubber Aksesuarlar Pipette controller Alternatif Serological pipettes, sterile, PS Alternatif  Alternatif Serological pipettes, sterile, PS, bulk Alternatif Demeter pipettes, sterile, PS

Simple and useful: the LABSOLUTE® cryo racks permit one-handed opening and secure screw closure of tubes. This effectively prevents contamination.

• Dimensions (W x H x D): 215 x 25 x 100 mm
• Available in three different colours
• With rubber feet for secure stand

Aksesuarlar Cryo tubes, PP

These high-quality CHEMSOLUTE® electrolyte solutions are perfectly suited to the secure and reliable maintenance and care of electrodes.

• Ideal for topping up and replacing reference electrolyte solution in pH electrodes
• Suitable for long-term wet storage of the electrodes
• Traceable to SRM from the National Institute of Standards and Technology (NIST)

The red LABSOLUTE® ice buckets are made of polyurethane foam and ideal for the cooling of samples, solutions or cultures. The ice buckets have excellent insulating properties and are suitable for use with dry ice, water ice, brine and acetone.

• Extremely robust and light
• With lid

Aksesuarlar Cryo tubes, PP Aksesuarlar Micro tubes, PP Aksesuarlar Safe seal micro tubes, PP Aksesuarlar Micro tube with flip cap, PP Aksesuarlar Centrifuge tubes, PP Aksesuarlar Centrifuge tubes, amber, PP Aksesuarlar Micro tubes 5 ml, PP

The LABSOLUTE® graduated and volumetric pipettes are made of soda-lime glass and have a batch identification. A batch-specific certificate of conformity is available on request.

Calibration
The graduated and volumetric pipettes are calibrated to "Ex" (+5 seconds) so that the draining volume of liquid corresponds to the printed volume specification after five seconds.

Accuracy class AS
All LABSOLUTE® graduated and volumetric pipettes satisfy the criteria of the highest accuracy class A. The tolerance lies within the standard defined for class A. The suffix "S" means rapid draining. The draining time is between 5 and 20 seconds, depending on the nominal volume, as opposed to 10 to 60 seconds with class A.

Durable labelling
All information is imprinted in brown diffusion dye. This dye is burned into the surface of the glass and can only be destroyed by glass erosion. The labelling is therefore unaffected by chemicals and cleaning agents.

Comply with DIN EN ISO 648. 3, 4 and 15 ml in addition to DIN EN ISO 648.

Aksesuarlar Pipette stand, vertical, 94 positions, PP Aksesuarlar Safety pipette fillers, natural rubber Aksesuarlar Pipette controller

The qualitative filter papers are manufactured from pure cellulose with a proportion of alpha-cellulose of almost 100 %. The ash content is about 0.06 %.

Grade 2005, fast filtering, particle retention 12-15 µm, filtration speed 10 s complies with DIN 53137, basis weight 84 g/m², thickness 0.20 mm

For large-volume or gel-like deposits (e.g. hydroxides of iron and copper or sulphides of iron and cobalt).

Alternatif Folded filters, qualitative, grade 2005 Alternatif Circles, qualitative, wet strengthened, grade 2105 Alternatif Folded filters, qualitative, wet strengthened, grade 2105 Alternatif Circles, quantitativ, wet strengthened, grade 1105 Alternatif Circles, quantitative, black ribbon equivalent, grade 1005

The autoclavable LABSOLUTE® racks made of PP are suitable both for 96 (Ø well 5.2 mm) single 0.2 ml tubes and for strips of PCR tubes. The individual positions are marked with figures and letters which simplifies organization of your samples. With or without lid - the decision is yours: the hinged lid can be completely removed.

• Available in different colours
• Dimensions (W x H x D): 130 x 33 x 98 mm

Aksesuarlar Strips of 4/8 PCR tubes, PP Aksesuarlar PCR tubes 0.2 ml, PP

Fine silk papers for cleaning of lenses and optical surfaces.

The qualitative filter papers are manufactured from pure cellulose with a proportion of alpha-cellulose of almost 100 %. The ash content is about 0.06 %.

Grade 2005, fast filtering, particle retention 12-15 µm, filtration speed 10 s according to DIN 53137, basis weight 84 g/m², thickness 0.20 mm

For large-volume or gel-like deposits (e.g. hydroxides of iron and copper or sulphides of iron and cobalt).

Alternatif Cirlces, qualitative, grade 2005 Alternatif Circles, qualitative, wet strengthened, grade 2105 Alternatif Folded filters, qualitative, wet strengthened, grade 2105 Alternatif Circles, quantitativ, wet strengthened, grade 1105 Alternatif Circles, quantitative, black ribbon equivalent, grade 1005

The LABSOLUTE® laboratory mat is the ideal protection of surfaces from liquids, heat and wear. The mat is made of food-grade, flexible silicone with a raised lip around the edge.

• Reversible with a blue and white site
• Integrated metal strip prevents the rolling of magnetic stirring bars
• Raised lip holds back up to 300 ml of liquid
• Autoclavable at 121 °C for 15 min
• Protects surfaces from hot objects up to 200 °C
• Anti-skid and noise dampening
• Reusable and environmentally friendly
• Compact storage by rolling up the mat

Aksesuarlar Magnetic stirring bars, cylindrical, PTFE Aksesuarlar Set of magnetic stirring bars, cylindrical, 10 pieces, PTFE Alternatif Bench protection paper

Save time during your Kjeldahl determination. No time-consuming self-manufacturing by using the practical ready-to-use Kjeldahl tablets from CHEMSOLUTE®.
They already contain the right amount of potassium- and sodium sulphate for the corresponding determination method.

LABSOLUTE® offers two effective options for cryo preservation. LABSOLUTE® Precision Freeze for an even, particularly gentle freezing process and LABSOLUTE® Quick Freeze for the rapid cooling of samples.

Protection against freezing too quickly: the LABSOLUTE® Precision Freeze, made of PC and filled with 100 % isopropyl alcohol, guarantees a slow, reproducible freezing process of -1 °C/min. The samples are protected against contact with the isopropyl alcohol thanks to the internal tube holders made of HDPE, and even the labelling of the samples remains undamaged. For thawing, the handy tube holder can also be used as a floating stand in the water bath when thawing the samples.

• Constant cooling rate of -1 °C/min
• Stackable container with foam inlay
• Housing made of PC
• Lid and tube holder made of HDPE

Aksesuarlar Cryo tubes, PP

The double-layered surface protector from LABSOLUTE® is ideally suited to protect all working surfaces from chemicals and radioactive, corrosive and toxic substances. The upper layer is made of 100 % cellulose which is highly absorbent. The bottom layer made of PE provides high tear resistance and prevents liquids leaking through in order to protect work surfaces from contamination.

• Dimensions (W x D): 460 x 570 mm
• Thickness: 0.24 mm
• Weight: 125 g/m²

- Absorption: 170 g/m2

Alternatif Laboratory mat, silicone

expand_less

Segmente ausblenden

The CHEMSOLUTE® range offers the best solutions for the cleaning and regeneration of your electrodes.

• Pepsin/HCl cleaning solution for removing organic contaminations such as proteins from pH combined electrodes
• Thiourea/HCl cleaning solution for removing silver sulphide from diaphragms

The LABSOLUTE® holder for disposables bags is made of steel wire and coated with a PE resin.

• With rubber feet
• Suitable for 200 x 300 mm disposable bags (7.696 994, 7.697 000)

Aksesuarlar Disposal bags, standard, PP

The LABSOLUTE® sample spoons made of PS are ideal for the sampling of powders, pastes, granulates and liquids. The white spoons are sterilized and wrapped individually. They can be used in direct contact with food.

The LABSOLUTE® mini coolers allow effective cooling of reagents and solutions. Mini coolers can be used very conveniently directly on the workbench and impress with a controllable cooling process and reproducible results.

The red LABSOLUTE® mini cooler 0 °C made of robust PC is filled with a non-toxic cooling gel. Pre-cool for at least 24 hours at -5 °C to -10 °C before use.

• Maintains the temperature of 0 °C for at least 2 hours

Aksesuarlar Centrifuge tubes, PP Aksesuarlar Centrifuge tubes, amber, PP

The chemically resistant and autoclaveable storage boxes made of PP are temperature-resistant from -80 °C to 125 °C and stackable. They offer space-saving storage and simple transport for several types of vials. The alphanumerically coded positions ensure that each sample vial can be clearly identified in the box.

All storage boxes are suitable for ND8, ND9, ND10 and ND11 vials and shell vials with a nominal volume of 1.5 ml, 1.8 ml or 2.0 ml.

The stable, natural coloured LABSOLUTE® balloon flasks are made of LDPE. The lids and the stopcock are made of PP. They are ideal for mixing, transporting and storing liquids. The carboys are extremely tight and have useful handles on both sides. They can be ordered with or without stopcock.

Alternatif Carboys with stopcock, LDPE

LABSOLUTE® offers two effective options for cryo preservation. LABSOLUTE® Precision Freeze for an even, particularly gentle freezing process and LABSOLUTE® Quick Freeze for the rapid cooling of samples.

A handy alternative to the dry ice solvent bath: the LABSOLUTE® Quick Freeze was developed for the rapid cooling of samples - 1.5 ml H₂O, for example, only needs approx. 3 minutes to be cooled down to 0 °C. Pre-cool for at least 24 hours at max. -80 °C before use.

• Rapid and controlled cooling of samples
• Delivery includes 12 adapters for converting the 2.0 ml hole to 0.5 ml tubes
• Housing and lid made of PC
• Filled with non-toxic insulation solution

Aksesuarlar Cryo tubes, PP

The crimping and decapping tools feature a chemically resistant surface lacquer that has been developed especially for use in the laboratory. Additionally, the crimping tools have hardened closing jaws with a special alloy that guarantee a long service life. The crimping pressure and crimping height of the crimping tools can also be adapted to the design of the crimp neck and septal thickness.

Alternatif Crimping tools Alternatif Crimping tool, pneumatic, manual

The crimping and decapping tools feature a chemically resistant surface lacquer that has been developed especially for use in the laboratory. Additionally, the crimping tools have hardened closing jaws with a special alloy that guarantee a long service life. The crimping pressure and crimping height of the crimping tools can also be adapted to the design of the crimp neck and septal thickness.

Alternatif Decapping tools Alternatif Crimping tool, pneumatic, manual

DNase-, RNase- and protease-free water for versatile use in molecular biology. BIOSOLUTE® water for molecular biology is produced by a combination of reverse osmosis and ion exchange purification, then sterile-filtered with a pore size of 0.1 µm. It is free of chemical additives and not treated with diethyl pyrocarbonate (DEPC).

BIOSOLUTE® Ethanol for histology is suitable for use in histology and cytodiagnostics for the dehydration of tissue samples and as a universal solvent. Ethanol for histology is denatured with MEK, IPA and Bitrex®.

The high-quality electrode storage solutions from CHEMSOLUTE® are perfectly suited for the safe and reliable storage of electrodes.

• Traceable to the SRM of the National Institute of Standards and Technology (NIST)

BIOSOLUTE® Tris for molecular biology is highly pure, tested for a particularly low content of heavy metals, and free of DNases, RNases, proteases.

Tris has a good buffer capacity in the range of pH 7.2 to pH 9.0 and is one of the most frequently used buffer substances. CHEMSOLUTE® Tris is recommended for use in molecular biology, e.g. in the TE buffer for DNA purification as well as in the TBE and TAE buffer for SDS-PAGE and agarose gel electrophoresis or in TBS buffers, e.g. in Western blotting.

BIOSOLUTE® Ethanol absolute, content min. 99.8 %, Molecular Biology Grade: For applications in molecular biology. Highly purified and free of DNases, RNases and proteases.

Reliable and easy to use: BIOSOLUTE® PBS Buffer tablets or powder for phosphate-buffered saline solution only need to be dissolved in deionized water. By using these readymade buffers, you avoid errors in calculation, formulation, weight and pH adjustment.

Your benefit

• Guaranteed batch consistency and reproducibility
• Manufactured from high purity starting materials
• Precisely weighed with adjusted pH value
• Saves storage space compared to liquid prepared buffers
• Autoclavable

Applications

• Immunoassays
• Immuno-histochemical procedures
• Microbiological procedures
• Tissue and cell culture procedures
• Sample dilution