Wide-mouth bottles

For perfect and tight closure of GL 45 screw necked laboratory bottles. Large ridges on the cap outer surface guarantees for increased grip and fast closure. Color coded caps enable fast, easy and practical identification of bottle content.

These gamma sterilised bottles are specially designed for taking, handling, transporting and storing water samples. Manufactured either as clear or amber colour from polypropylene. Clear bottles are manufactured from glass-like transparent special grade polypropylene. Amber bottles are manufactured from an amber coloured clear polypropylene which is higly translucent but still preventing the UV light penetrating inside the bottle. Square body form offers easy handling, and optimum space saving solutions during storage period. Wide bottle neck (GL 50) provides easy filling and pouring. Cap is made from PE with self sealing lock with integral security ring. Unique cap inner design ensures hermetical closure and guarantees an excellent leak and contamination proof bottle. Embossed graduation ( presicion of ±2% ) on side wall enables volume verifications. Each bottle is labelled specifying e.g. sample and source descriptions, code and lot numbers and expiry date.
Bottles with liquid sodium thiosulfate (20 mg/lt - acc to ISO/FIS 19458:2006 ) are ideal to analyse water meant for human consumption, swimming pools, and any other water where chlorine may modify the composition of the sample.
Empty bottles, without sodium thiosulfate ; ideal to sample water for physical and chemical analysis, as well as for other sample requirements that demands sterile bottles.

• With white screw caps made of PP
• Liner Material metal foil
• Made of WHEATON 180 low potassium borosilicate glass
• High ultraviolet transmission

Laboratory bottle with batch identification (Retrace Code), certificate available via the internet, with GLS80^® wide-mouth (o.d. 80mm). Glass Type I / neutral glass as per USP, EP and JP. Autoclavable. Ideal for any application with powder or granulate, easier filling and emptying.
The coating of DURAN^® protect is a resistant and transparent plastic coating based on a cross-linked copolymer. Complete with blue quick release closure (PP, integral lip seal) and pouring ring (PP) for drip-free pouring and clean, safe working.
The coating adheres to the surface of the glass and fulfils the following functions:

• protection of the glass surface against mechanical damage (e.g. scratches)
• keeps broken glass in place after breakage and avoids or reduces leakage
• minimises loss of media in case of breakage
• absorption of light up to a wavelength of 380nm

• autoclavable (< 135 °C)
• can be used in microwaves
• high temperature applications for extended periods (>30min) and direct heating with a flame not recommended
• freezing down to -30°C possible

Sturdy bottle with wide-necked opening and screw cap. Particularly suitable for viscous media, powder, granules and pastes. Leakproof. Individual customer-specific printing possible.

Bottles with screw threaded neck. With blue PP screw cap and sealing ring.

Will withstand considerable pressure before rupturing. Secured by tagging points on bottle and PP cap. Confidential notes can be placed in the space between insert sealing plug and cap. Food-safe according to EC Regulation 1935/2004 and EC Regulation 10/2011.

Ideal for sampling, storing, transport of liquid, pasty and granulated products. Food safe. Batch certificate available to download. Transparent.

• Iron wire, zincked
• Natural bristles

Thick-walled bottles for storing and shipping liquids and dry chemicals.

• Natural
• ISO Standard 13485: 2003
• USP class VI
• US Standard 21CFR177.1520

Easily access contents with large wide-mouth PPCO bottles with closure, featuring a large cap. These polypropylene copolymer bottles are specifically designed for applications where large volumes require autoclaving.

Sterile, square narrow-neck bottle (250 ml) with safety screw cap (type E).

Properties & advantages:

• Prefilled with 5 mg sodium thiosulphate ( = 20 mg/l).
• Space-saving, rectangular shape
• Narrow neck thread (20mm)
• Moulded seal and locking ring
• Safe to leak
• Translucent
• Exposed scale
• Shelf life 24 months

With screw cap and carrying handle.

Falcon^® Cell Culture Flasks feature a unique vacuum-gas plasma tissue culture treatment. These products are certified as sterile, non-cytotoxic, and pyrogen-free. Other surface media available on request.

• Good chemical and thermal resistance
• Sturdy, strong-walled design

The cell culture bottles with filter screw cap, shine with improved cell adhesion thanks to a physical surface treatment. The angled bottle neck and the graduation on both sides facilitate handling of the bottle. Triple-packed to comply with strict cleanroom conditions.

Features & Benefits:

• Free of detectable DNase, RNase and human DNA
• Free of detectable endotoxins, free of cytotoxic substances

Nunclon™Δ cell culture flasks with surface areas from 25 to 175cm² are available with filter caps or Vent/Close caps for good gas exchange. Short, wide neck (angled or straight) allows easy access to entire growth surface. The Nunclon™Δ treatment is limited to the intended growth area. Neck areas are not treated to prevent cell attachment and growth in undesired areas. Certified pyrogen-free and tested for both monolayer formation and cloning efficiency employing primary cells as well as repeating cell lines. Sterile.
Material flasks: Polystyrene
Material caps: HDPE

Calibrated to contain (IN). With PE stopper and with scratched ring mark. DIN EN ISO 1042. Incl. individual USP certificate and certificate of conformity.

Nature, leak-proof. Round, thin-walled and soft wide-mouth bottles for general laboratory work. Good chemical resistance to a wide range of acids, bases and alcohols.

To use with dissolved oxygene sensors, e.g. FDO^® 925 or CellOx^® 325. Bottles of 250 ml.

Sterile laboratory bottle for use in laboratories and chemical handling areas. Good product presentation due to crystal-clear PET. Space-saving and absolutely leakproof. Ideal for storing and packing liquids.

• Sterile SAL 10^-3 (according to ISO 11137)
• With tamper-proof closure
• With moulded-in raised graduation

Clear. For packaging biological and diagnostic reagents that have to be filled sterile or for adding additives via syringes. For clean room applications, on plastic carriers, double sealed in plastic bags.

• Non cytotoxic
• Robust and break-resistant
• Leakproof
• USP class VI

Plastic-coated, coating up to 135 ° C steam sterilisable. According to DIN ISO 4796, with retrace code. Batch certificates available as download.
Please order cap and pouring ring separately.

With PP screw cap and pouring ring, temperature resistance up to 140 ° C. According to DIN ISO 4796, with retrace code. Batch certificates available as download.

With PES screw cap, PTFE seal and pouring ring, temperature resistance up to 180 ° C. According to DIN ISO 4796, with retrace code. Batch certificates available as download.

Suitable for use in the freezer down to -135 °C. 2 l and 2.5 l bottles can be used for layer, suspension or non-adhesive roller cultures.

• Crystal clear
• Shockproof
• Autoclavable
• Leak proof

Transparent. Good chemical resistance, ideal for long-term storage of liquids.

• NS stopper made of PP
• With square-knob cap and red core
• Autoclavable at 121 °C (2 bar) according to DIN EN 285

Borosilicate glass with screw cap made of PBT and sealing disc, PTFE coated. According to DIN ISO 4796-1. Temperature resistance up to 180 ° C, autoclavable.

Transparent. With screw cap made of PP. Good chemical resistance, ideal for long-term storage of liquids. Autoclavable at 121 °C (2 bar) according to DIN EN 285 (except 10000 ml). Size 10000 ml with PE foam seal and two handles made of HDPE. Food-safe product according to regulation (EU) No. 10/2011.

For wide-mouth square bottles.

For use in automated analytical systems.

• Transparent
• For wide-mouth bottles

• Autoclavable

With PTFE coated rubber seal.

For the determination of sedimentable particles in water and waste water and for measuring the sand content in well water. With leak-proof polypropylene screw cap.

• Transparent
• Autoclavable
• Graduation steps 100 ml

Suitable for liquids or solids. Food safe. Screw cap with plug seal, tamper evident. Moulded graduations.

Nature. Resistant to acids, alcohols and bases.

• Autoclavable
• Leak-proof
• Large marking area

With durable, multi-lingual printing of the ingredient in english, french, german and spanish language. Available for different solvents, each bottle is printed with the corresponding GHS symbols, NFPA code and risk/safety information. Colour coded PP closures with precision tips.

With natural translucent jet and cap colour as indicated .

Fluorinated wide-mouth bottles made of HDPE with fluorinated white screw caps made of PP. Leak-proof. Suitable for sampling and short-term use as extraction bottle for the EPA method.

Natural, shockproof and leak-proof. Suitable for shipping liquids and storing chemicals and standards. Chemical resistance to most acids, bases and alcohols.

The transparent wide-mouth bottles can be used in the temperature range from 20 ° to 175 ° C. They are leak-proof and chemical resistant. They resist repeated autoclaving up to 150 ° C.

Screw cap PP, seal PVDC. Wide mouth bottle translucent, suitable for solids.

Ship and store diagnostics, biologicals, specialty chemicals, reagents, adhesives and veterinary pharmaceuticals with wide mouth PPCO Packaging Bottles with Closure. These durable, autoclavable bottles are designed for shipping and storage.

Nature coloured, with standard thread.

Screw caps are heat-resistant up to +110 °C.

The reagent bottle is particularly suited for storing, packing, taking samples, sampling and transport of granules and paste-like media.

• HDPE, transparent
• PP tamper-evident screw cap, blue
• UN approval for bulk goods