Syringe filters

Mini-cartridge filters are inserted into a stainless steel housing. The bayonet closure provides a secure seal against back-pressure surges. An inner O-ring seals the lower part of the housing (except for the aeration housing). For the filtration of larger volumes and for long service lives. Individually tested. Their integrity can be checked at any time. Can be autoclaved repeatedly.

There are several different types which differ in the filter material used:

Sartobran-P
Heterogeneous double membrane of cellulose acetate, for the sterile filtration of liquids.

Sartofluor
Hydrophobic PTFE membrane filter, for the sterile filtration of air and gases.

Sartopure-PP3
High performance PP fleece prefilters for particle reduction.

In polysulphone for use with syringes for analytical and preparative use. Filtration-media must be selected separately.

Applications of FP 025/1:
Clarification and sterile filtration of aqueous liquids and gases.
Applications of FP 050/1:
Sampling and flow rate applications. Ideal for filtrations using peristaltic pumps and for gas sterilisation.

Max. pressure: Max. temperature:

7 bar 180 °C

Alternative Filter units Nalgene™ Rapid-Flow™, SFCA Membrane, sterile Alternative Filter Units, Cellulose Nitrate Membrane, sterile Alternative Filter Units Nalgene™ Rapid-Flow™, Nylon Membrane, sterile

Housing PP. NY (Nylon) and NY25 Plus (Glass Fiber 0.7 µm² + Nylon).

This is a rather hydrophilic membrane; it is recommended for filtration of aqueous and organic/aqueous medium polar liquids.
Excellent chemical compatibility with esters, bases and alcohols.
Sterile filters individually blister-packed.

For the ready-to-use filter units only virgin raw material is used. This ensures that there is no interaction with the sample to be filtered, provided that the units are used properly. The filter units are intended for laboratory use only and at temperatures up to 60°C.
Note: If syringes with a volume <10 ml are used, a pressure could be created which exceeds the max. operating pressure (700 kPa/7 bar) of the filter unit. EtO-sterilized = endotoxin free according to LAL-Test (USPXXIII), Sensitivity: 0.25EU/ml.

• Inlet female luer-lock
• Outlet luer cone or extended tip
• Autoclavable at 121°C

Hydrophilic membrane suitable for pre-filtration.

For the ready-to-use filter units only virgin raw material is used. This ensures that there is no interaction with the sample to be filtered, provided that the units are used properly. The filter units are intended for laboratory use only and at temperatures up to 60°C.
Note: If syringes with a volume <10 ml are used, a pressure could be created which exceeds the max. operating pressure (700 kPa/7 bar) of the filter unit. EtO-sterilized = endotoxin free according to LAL-Test (USPXXIII), Sensitivity: 0.25EU/ml.

• Inlet female luer-lock
• Outlet luer cone or extended tip
• Autoclavable at 121°C

Hydrophilic membrane; it is recommended for filtration of aqueous and organic/aqueous medium polar liquids.

For the ready-to-use filter units only virgin raw material is used. This ensures that there is no interaction with the sample to be filtered, provided that the units are used properly. The filter units are intended for laboratory use only and at temperatures up to 60°C.
Note: If syringes with a volume <10 ml are used, a pressure could be created which exceeds the max. operating pressure (700 kPa/7 bar) of the filter unit. EtO-sterilized = endotoxin free according to LAL-Test (USPXXIII), Sensitivity: 0.25EU/ml.

• Inlet female luer-lock
• Outlet luer cone or extended tip
• Autoclavable at 121°C

Hydrophobic membrane. Ideal for filtration of non-polar liquids and gases.

For the ready-to-use filter units only virgin raw material is used. This ensures that there is no interaction with the sample to be filtered, provided that the units are used properly. The filter units are intended for laboratory use only and at temperatures up to 60°C.
Note: If syringes with a volume <10 ml are used, a pressure could be created which exceeds the max. operating pressure (700 kPa/7 bar) of the filter unit. EtO-sterilized = endotoxin free according to LAL-Test (USPXXIII), Sensitivity: 0.25EU/ml.

• Inlet female luer-lock
• Outlet luer cone or extended tip
• Autoclavable at 121°C

Hydrophilic membrane for aqueous polar and light unpolar solutions. Very low protein binding

• Hydrophobic PTFE-membrane, laminated with polypropylene
• first class chemical resistance opposite to common organic HPLC solvents

Application:
Filtration of aggressive solutions.
GF92 membrane to the prefiltration of loaded solutions.

Alternative Syringe filters Spartan®, Regenerated cellulose

The Whatman Mini-UniPrep™ filter provides a quick and easy means of removing particles from HPLC samples. In comparison to other methods the amount of time required for sample preparation is reduced to one third. Mini-Uni-Prep™ is a ready-to-use filter unit consisting of a 0.4ml chamber and a plunger. The plunger contains a filtration membrane at one end and a cap with septum at the other. The plunger is pressed through the sample in the chamber. The pressure generated forces the filtrate into the plunger reservoir, with air escaping through the vent hole until the locking mechanism engages to form an airtight seal. The unit can now be placed in any autosampler and the sample analysed.

Accessories Compressor for Mini-UniPrep™ syringeless filters

Amber colorant prevents photo degradation of light sensitive samples. Same colorant used in pharmaceutical containers designed to meet USP specifications for light resistance. Translucent amber chamber and plunger enable easy visual inspection

Accessories Compressor for Mini-UniPrep™ syringeless filters

Provides a single disposable, manual pressure filtration system which is fast and easy to use in sample preparation.

• Built-in pre-filter for "difficult" samples
• Minimal waste

Comprise a graduated, medical grade PP barrel, maximum capacity 12ml with 3cm² filter at the base, luer slip outlet and plunger. Non-sterile

Slit septum cap enables Mini-UniPrep use with current robotics on HPLC instruments for high throughput automation
Durable yet flexible slit septum cap has been specially designed for instruments with sensitive sampling needs. Sample evaporation is minimal.

Accessories Compressor for Mini-UniPrep™ syringeless filters

Comprise a 5ml capacity, medical grade polypropylene test tube which initially holds the sample, and hollow plunger incorporating a filter at the tip. In use the sample is manually pressure filtered into the plunger which then acts as a storage vial for the filtered sample. The plunger has a removable cap. Non-sterile.

The Millex® Syringe Filter has been specially manufactured for sterilization or clarification of biological solutions. To increase throughput and flow rate, the filter has a larger filtration surface. This also reduces the pressure required to emtpy the syringe. The filters are provided with a quality certification because they are manufactured under a controlled environment and an automated process.

The Millex® Syringe Filter has been specially manufactured for sterilization or clarification of biological solutions. To increase throughput and flow rate, the filter has a larger filtration surface. This also reduces the pressure required to emtpy the syringe. The filters are provided with a quality certification because they are manufactured under a controlled environment and an automated process.

Whatman GD/X syringe filters are the perfect solution for samples with high viscosity or samples that contain particles. Four filter layers decrease clogging and therefore filter exchange during processing is avoided. These filters allow 3 to 7 times higher throughput than traditional types.

For the filtration of biological and immunological samples, cell culture fluids, cellular solutions and biological fluids and for laboratory applications with aqueous and non-aqueous liquids, as well as for gases.

The Millex® Syringe Filter has been specially manufactured for sterilization or clarification of biological solutions. To increase throughput and flow rate, the filter has a larger filtration surface. This also reduces the pressure required to emtpy the syringe. The filters are provided with a quality certification because they are manufactured under a controlled environment and an automated process.

The Millex® Syringe Filter has been specially manufactured for sterilization or clarification of biological solutions. To increase throughput and flow rate, the filter has a larger filtration surface. This also reduces the pressure required to emtpy the syringe. The filters are provided with a quality certification because they are manufactured under a controlled environment and an automated process.

The Millex® Syringe Filter has been specially manufactured for sterilization or clarification of biological solutions. To increase throughput and flow rate, the filter has a larger filtration surface. This also reduces the pressure required to emtpy the syringe. The filters are provided with a quality certification because they are manufactured under a controlled environment and an automated process.

The Millex® Syringe Filter has been specially manufactured for sterilization or clarification of biological solutions. To increase throughput and flow rate, the filter has a larger filtration surface. This also reduces the pressure required to emtpy the syringe. The filters are provided with a quality certification because they are manufactured under a controlled environment and an automated process.

The compressor can process up to 8 samples at any one time, further improving sample processing time.

Laminated hydrophobic glass microfibre filter. Ideal for the sterilisation of large volumes of air at low pressure. Available in two sizes, depending on the volume of air or gas to be filtered. Non-sterile, separately available. Autoclavable.

• Maximum operating pressure 4.1 bar
• Wide range of chemical compatibility
• High loading capacity and high through-put filtration media
• 99.97% of particles of 0.3µm or larger are retained
• Autoclavable at up to 132 °C for one hour
• Connectors: stepped barb (SB) and female national pipe thread (FNPT)