The two-part, non-sterile LABSOLUTE® disposable syringes, with Luer lock connection complying with DIN EN 1707 or Luer slip connection complying with DIN EN 20594-1, are fully manufactured from robust, chemical resistant PP. They are free of latex, plasticizers and PVC. There are no rubber plunger seals or silicone lubricants that can cause contamination of the samples. The syringes are also impressive due to the safe functional back-stop feature and an easy-to-read permanent graduation.

The pneumatic hand-held crimping tool makes crimping and decapping of vials very easy and ergonomic. The time spent to crimp or decap a series of many samples, especially, is shortend clearly. As the balancer compensates the weight of the pneumatic crimper, steady and precise crimping is no problem.

• Operated by compressed air (min. 6.2 bar = 90 psi)
• Easy handling
• Interchangeable heads for crimping and decapping
• Adjustable, constant and reproducible crimping pressure
• Space-saving installation with a balancer on your working bench (Art. 7.618 928)
• CE mark of conformity

Original Eppendorf, high quality, pipette tips at an attractive price.

• packed in multi sealable bag
• tips available in various sizes from 10 µl up to 10.000 µl

The handwheel allows precise suction of the liquid into the pipette with one hand. When the wheel stops, the piston remains in the desired position. The liquid can be blown out by pressing the piston back or allowed to flow out by setting the lateral switch to "Ex".

Borosilicate glass 3.3. Conformity certified, with batch certificate. With NS and PE stoppers, to DIN EN ISO 1042. Calibrated to contain (IN) and all the tolerances are according to DIN/ISO Class A standards.

• Conformity certified with batch ID
• DIN EN ISO 4788
• Hexagonal foot with spout
• Calibrated to contain (IN)
• Inscriptions are printed with blue enamel
• Batch certificate can be downloaded from website

To DIN EN ISO 1042, adjusted to IN, with PE standard ground joint stoppers.

Without silicone. Designed as vacuum and high vacuum grease. No silicone derivatives, polymerisation or gumming. Excellent adhesion and viscosity. Acid/alkaline resistant. Locked joints can be loosened by brief, gentle heating. Can be used to make temporary glassware repairs. Biodegradable. Non-toxic in normal use.

For viscous liquids up to 200 mPa* s and high vapour pressure, e.g. ethanol and acetone.

• Colour coded with 1 colour ring
• Continuous volume scale
• Automatic tip recognition in Multipette^® 4780, Multipette^® plus, Multipette^® stream and Xstream

• Practical refilling system for epT.I.P.S box
• Trays supplied either double-sided or as stack packs, depending on tip size
• Contamination-free transfer to the trays into the work box
• Autoclavable trays are available
• Colour-coded trays for simple identification of the tips.

Low-priced, magnetic stirrer/hotplate, with heating, with stainless steel top plate.

• Pipette tips boxed in racks with integral, twin-layer ep Dualfilter made from hydrophobic polyethylene without additives. One layer protects the user against aerosols, the other against airborne microbes

• All tips are sterile, pyrogen-free and PCR clean (free from human DNA, DNase, RNase, PCR Inhibitors)
• Batch specific certificate available on request
• The filter doesnát retain liquid when accidentally wetted during aspiration, the whole sample can be recovered easily

Developed for use in preparatory work. For distillation and reflux in aqueous, neutral and alkaline solvents, even under a vacuum. Effective in even the smallest volumes of liquid and after multiple interruptions. Prevents any bumping. Natural product.

Specifically for analytical work. Can be used for distillation in a clean, neutral and basic environment. Not suitable for vacuum distillation. Effective in the smallest amounts of liquid, also after multiple distillations. Prevents " bumping". Ceramic product with relatively high level of purity and abrasion resistance.

For viscous liquids up to 200 mPa* s and high vapour pressure, e.g. ethanol and acetone.

• Colour coded with 1 colour ring
• Continuous volume scale
• Automatic tip recognition in Multipette^® 4780, Multipette^® plus, Multipette^® stream and Xstream

Without heating. Extremely convenient magnetic mini-stirrer for mixing volumes up to 250ml.

• Durable, brushless motor
• Infinitely variable speed range
• Strong magnetic coupling

Crepe paper, adhesive. With indicator. Colour changes according to DIN EN ISO 11140-1. Rolls of 50 m.

Comply with the exacting requirements set by the medical, pharmaceutical and food industries, molecular biology and cell technology.

• Sterile
• Free from pyrogens, RNase, DNA and ATP
• Independently checked and certified by an external laboratory.
• Individually blister-packed

With heating and ceramic hotplate which offers excellent chemical resistance.

• powerful motor for stirring quantities of up to 5l, 10l or 15l (H2O)
• fixed safety circuit of 550°C
• Hot Top indicator - hot surface warning to prevent burns
• exact temperature setting via digital display (LED)
• digital error code display
• elevated control panel for protection against spilled liquids

Clamps for safe shaking of Erlenmeyer flasks.

• practical refilling system for epT.I.P.S. Box
• workbox with tips
• autoclavable
• PCR quality
• certified free from human DNA, DNase, RNase and PCR inhibitor

Amber Borosilicate glass with PE stoppers, DE-M marking, with batch certificate and white enamel graduations. According to DIN EN ISO 1042. Calibrated to contain (IN) and all the tolerances are according to DIN/ISO Class A standards.

• A small clasp on the patented cap locking device clips onto the rim of the tube
• Autoclavable when open (121°C, 20min.)
• Can be opened and closed easily with one hand
• With frosted labelling area.
• The clasp on the cap prevents the lid springing open accidentally (e.g. when heating)
• Excellent mechanical stability for centrifugation
• Graduated
• Safe-lock reaction vessels are also available in Eppendorf Biopur^® Quality
• 0.5ml and 1.5ml capacity Safe-lock reaction vessels can be centrifuged up to 30 000 x g

• Flat, frosted cap and marking patch on the body of the tube provide generous space for labelling
• Simplified opening and closing due to improved neck/cap geometry
• Graduated from 0.1 to 1.5 ml on the tube body
• Autoclavable when open (at 121 °C for 20 mins.)
• Can be centrifuged up to 30000 x g in fixed angle rotors (up to 70000 x g in swing-out rotors)
• Compatible with Micropestle

Plate stands with slip resistant foil. Max. load 5 kg.

Test tube shaker with infinitely adjustable speed range. Specially for mixing small sample volumes with touch function.

With heating and ceramic hotplate which offers excellent chemical resistance.

• powerful motor for stirring quantities of up to 5l, 10l or 15l (H2O)
• fixed safety circuit of 550°C
• Hot Top indicator - hot surface warning to prevent burns
• exact temperature setting via digital display (LED)
• digital error code display
• elevated control panel for protection against spilled liquids

• Minimum protein loss (less than 3%, BSA 1µg/ml)
• No surface coating, e.g. silicone
• Free of DNA, DNase, RNase and PCR inhibitors (PCR clean)
• Novel PP manufactured under optimized conditions
• Highly transparent

Developed for preparatory and analytical purposes. Suitable for biochemistry, biotechnology, microbiology, microanalysis. Can even be used in strong acids and alkalis, and in all solvents and oxidants. Suitable for vacuum and high-vacuum distillation. Reduces distillation times in rotary evaporators. No abrasion, absorption of substances or solvents. Softening (evaporation) occurs at 2500°C. Can be sterilised by dry heating. Effective in even the smallest volumes of liquid, even after multiple interruptions. Prevents any bumping. Highly resistant.

Overhead stirrer designed for simple stirring tasks for quantities up to 15 l (H₂O). It automatically adjusts the speed through microprocessor controlled technology within the speed range of 0/30 to 2000 rpm. Safety circuits installed ensures automatic cut-off in an anti-stall or overload conditions. Continuous comparison of shaft speed to desired speed is maintained and variations are adjusted automatically. This guarantees a constant speed even with changes in viscosities of the sample.

• Digital speed display
• Infinitely adjustable speed
• Push-through agitator shafts
• Overload protection
• Short-term overload operation

Silicone-free stopcock grease. No silicone derivatives, polymerisation or gumming. Excellent adhesion and viscosity. Stable grease film enables safe, long term use. Low heat-up occurs during rotation even if operation is continuous. When sealing glassware systems with glass and metal stirrers and shafts Alsirol protects rotating, precision-ground sockets and stirring shafts against glass abrasion. Also suitable for lubricating rotating metal and glass components. Acid and alkali resistant. For use under vacuum and high vacuum. Biodegradable. Non-toxic in normal use.

Shot poised. Without thermometer. Reference temperature: +20°C.

Stable, multi-use trolley with parking brake.
Push-button collapsing/unfolding.
Made in Germany.

Universally used strong overhead stirrer for quantities up to 40l (H₂O). It automatically adjusts the speed through microprocessor controlled technology within the speed range of 0/30 to 2000rpm. Safety circuits installed ensures automatic cut-off in an anti-stall or overload conditions. Continuous comparison of shaft speed to desired speed is maintained and variations are adjusted automatically. This guarantees a constant speed even with changes in viscosities of the sample.

• Digital speed display
• Infinitely adjustable speed
• Push-through agitator shafts
• Overload protection
• Short-term overload operation
• Slim casing
• Quiet operation
• Error code display

• Simple, practical and ergonomic single-hand operation
• Large labelling area
• Certified purity: Available in lot-tested and certified Eppendorf Quality, PCR clean, Sterile and Eppendorf Biopur^® purity levels
• Maximum safety and stability for centrifugation up to 25000 x g
• Compatible with accessories for conical 15 ml tubes - many existing adapters and racks can be used

• From 80 °C on, please use tube clips (cat. no. 9.409 294)

• Technical improvements on the trusted RW20 series design, mechanically controlled
• with digital display
• robust, ergonomic design
• constant power-drive
• two speed ranges for universal use from 60rpm to 2000rpm
• hollow-shafted chuck for rotor shaft height adjustment (only when stationary)

• Less than 1% loss of DNA / RNA at low concentrations and critical conditions (high salt, short DNA-fragments)
• No surface coating, e.g. silicone
• Free of DNA, DNase, RNase and PCR inhibitors (PCR clean)
• Novel PP, manufactured under optimized conditions
• Highly transparent

3 possible operation modes guarantee optimum adjustment to your application:
Operating mode A: Suitable for work with varying parameters (from -50°C to 450°C). Adjustable safety temperature
Operating mode B: Suitable for repeated operation under uniform conditions and parameters
Operating mode C: Suitable for unsupervised operation

• with optimised PID control
• reset function
• includes stainless steel sensor probe H 62.51
• for all magnetic stirrers with a DIN 12878 class 2 contact thermometer connection, e.g. IKA^®, Heidolph and Corning with adapter AD-C1.

Polypropylene tubes for PCR experiments
Product characteristics of 0.2ml PCR tube:

• Contamination shield on attached lid
• Defined lid position (90°) due to special hinge
• Highly transparent
• Tight sealing
• Easy to open
• Can be used in all thermal cyclers with 0.2ml block format
• Certified being free from human DNA, DNase, RNase and PCR inhibitor

• frosted writing surface
• Autoclavable when open (at 121°C for 20 mins.)
• Highly transparent
• Easy to open
• Can be used in Mastercyclers with 0.5ml block format
• Certified being free from human DNA, DNase, RNase and PCR inhibitor

The 4-blade propeller stirrers provide axial flow and create increasing shear forces at higher stirring speeds. Recommended for medium to high speed operations.

Stainless steel 18/10. Satin finish. With knob lid.

Wide speed range from 0/50 to 1700 rpm. Integrated temperature control. Incl. PT 1000 temperature sensor. Exact temperature and speed setting via digital display, even when switched off. Set safety temperature limit displayed digitally. Hot Top indicator: hot surface warning to prevent burns. Digital error code display.

• With adjustable safety circuit of heating plate temperature (50 to 380 °C)
• Safety magnetic stirrer with heating, suitable for unsupervised operation
• Bushing according to DIN 12878 for connecting a contact thermometer, e.g. ETS-D5, enables precise temperature control
• The control accuracy with PT1000 temperature sensor is ±1 °C
• High level of safety thanks to improved heat control technology
• Enclosed assembly (IP 42) guarantees long service life
• Very broad temperature range (RT to 340 °C)
• Extremely fast heating times
• Electronic speed control
• High magnetic adhesion
• Incl. protection cover H 100

Purity, stability, color and other features to facilitate laboratory work.

• Extremely thin-walled polypropylene wells guarantee an optimal temperature transfer
• Exceptionally stable and torsion-resistant polycarbonate frame
• Elevated well edges ensure effective sealing and reduce the risk of cross-contamination
• Batch-tested and certified free of DNA, DNase, RNase and PCR-inhibitors (PCR clean), Eppendorf twin.tec^® microbiology additionally free of bacterial DNA
• Two versions available: With edge (skirted) or half-skirted (semi-skirted)
• Autoclavable up to 121 °C
• Available with bar code (on request)

• Ergonomic operation: Simple, practical and ergonomic operation. Large labelling area.
• Lid design: Screw cap for minimized sample evaporation during storage and incubation in a wide range of temperatures from -86 °C to 100 °C
• Material: Exceptionally high-quality, transparent polypropylene, free of plasticizers, biocides or mold release agents, for reliable test results
• Certified purity: Available in lot-tested and certified Eppendorf Quality, PCR clean and sterile purity levels
• Centrifugation safety: Maximum safety and stability for centrifugation up to 25 000 x g and fast and efficient protocols.
• Conical shape: Compatible with accessories for conical 15 mL tubes - many existing adapters and racks can be used.

Without heating. Small magnetic stirrers with digital speed display (LED).

• Electronically controlled motor for more capacity
• Higher range of speeds from 0rpm to 2500rpm
• Excellent chemical resistance due to glass top and plastic base in TPC-ET
• Manufactured in recyclable materials
• Power supply with adapter for EU/CH/UK/USA

For viscous liquids up to 200 mPa* s and high vapour pressure, e.g. ethanol and acetone.

• Colour coded with 1 colour ring
• Continuous volume scale
• Automatic tip recognition in Multipette^® 4780, Multipette^® plus, Multipette^® stream and Xstream

18/8-9 stainless steel, for wall mounting, incl. screws and wall plugs, suitable for 1 dispensing box or suitable for 3 dispensing boxes.

Shot poised. Without thermometer. Reference temperature: +20°C.

Large capacity bulb which works perfectly with all pipette sizes from 1ml up to 100ml. First squeeze the silicone bulb and the thumb lever controls both the aspirate and dispense modes. Incorporates central button to blow out the residual liquid into the pipettes

The plastic material of the UVettes^® provides a transparency range of 220nm to 1600nm. It is possible to carry out measurements in the UV range as well as the entire VIS range.

• Suitable for measuring small volumes, min. 50 µl
• Individually blister-packed for sterile work
• DNA-/RNase- and protein-free
• Choice of two optical path lengths: 2 mm and 10 mm
• UV- and VIS-transparent between 220 nm and 1600 nm
• Volume markings at 500 µl and 1000 µl
• Total transparent material with outstanding surface properties
• Optimal filling guaranteed by tapered cuvette base
• Recessed optical window prevents scratches
• Self-standing design
• Marking possible on frosted gripping surface
• Optimal use in BioPhotometer and in most common spectrophotometers, using adapters

Acc. to DIN 12252, form C.

Without heating. With glass ceramic top plate which offers excellent chemical resistance.

• powerful motor for stirring quantities of up to 5l, 10l, or 15l (H₂O)
• raised control panel for protection against leaking liquids

AS 260.1 Universal attachment
Able to hold most types of container using adjustable tension rollers. Surface: 320 x 320mm
AS 260.2 Fixing clip platform
For shaking round bottom vessels, volumetric and Erlenmeyer flasks. Supplied without clips.
Max. number of clips (capacity held): 56 x AS 2.1 (25ml), 23 x AS 2.2 (50ml), 23 x AS 2.3 (100ml), 11 x AS 2.4 (250ml), 9 x AS 2.5 (500ml), 5 x AS 2.6 (1000ml)
AS 260.3 Petri dish attachment
For gentle mixing and suspension of cell cultures or growth media in petri dishes, culture bottles and containers. With integral anti-slide mat (PP).
AS 260.5 Separating funnel attachment
For HS 260 basic and control
For shaking, elution, extraction, gassing out, dissolving, enriching. The 3 tension rollers supplied are height-adjustable to accommodate different separating funnel sizes. The separating funnels are secured by means of O-rings (6 O-rings supplied).
Capacity: Number of funnels (pear shaped) x volume 6 x 50ml, 5 x 100ml, 3 x 250ml, 3 x 500ml

• Numbered positions for easy handling and identification
• Made of high quality polypropylene (PP) for chemical and physical resistance
• Temperature stability from -86 °C to 121 °C
• Autoclavable (121 °C, 20 min)
• Laboratory washer-safe for easy cleaning
• Stackable to save lab space

The fire blanket is a small fire equipment principally used to extinguish small incipient (starting) fires by smothering the fire cutting off the oxygen supply from the fire.

• According to DIN 1869
• Made of texturized E-glass fabric
• Cut edges seamed
• Folded and packed in a red plastic bag with print "Löschdecke"

With glass surface. The control can be optimized by regular firmware updates. The integrated timer and counter function supports the control of kinetics and sensitive reactions.

• Alteration of the stirring direction possible
• Heating plate made of aluminium alloy for optimum heat transmission
• Clearly arranged LCD display
• Housing made of glass for optimum cleaning and chemical resistance
• Temperature control directly in the medium with PT 1000 temperature sensor
• Adjustable safety circuit up to 360 °C
• IKA SmartTemp^® function prevents users from burn injuries
• Timer
• USB-/RS232 interface
• 10 years warranty