Mikropłytki

96 Well Polystyrene Microplates are manufactured under DIN ISO 9001 guidelines and can be traced all the way back to production through a defined LOT number system. Furthermore they are footprint compatible with automated systems. Polystyrene is a highly clear polymer with excellent optical properties which makes it ideal for precise optical measurements. An it is suitable for work with cell cultures.

Properties:

• Reduction of sample volume by up to 50 %
• Standardised pathlength (1 cm=170 μl, 0.5 cm=80 μl)
• medium binding microplate is more hydrophobic than the surface of a high binding microplate
• μClear® with ultra-thin films, without the use of adhesives or solvents
• Are analysed for detectable DNase, RNase and human DNA
• Are free of biocides and antistatics
• Are manufactured without the use of siliconbased mould release

The product range of the 1536 well polystyrene microplates is extended by a polypropylene storage plate (Deep Well microplate) with a total volume of 18 μl. The working volume of this plate is between 3 and 15 μl.

Properties:

• Uniform external dimensions and tolerances
• Alphanumeric well coding
• High chemical resistance
• High temperature resistance (-196 °C to +121 °C)
• Sealable with adhesive films and heat sealer

Cell culture multiwell plates are available in the hydrophilic surface (TC surface treatment) for improved cell adhesion and hydrophobic surface for suspension cultures and hybridoma cells. Cell culture microplates from the CELLSTAR® range are specifically treated. This treatment leads to polar groups such as carboxyl and hydroxyl groups , added to the plastic surface. These allow the growth of adherent cell lines. They are also suitable for automated systems and contain an alphanumeric well coding. They are also suitable for footprint systems and contain an alphanumeric well coding.

Properties:

• Perfect for top reading even at low working volumes
• Suited for transmission, fluorescence and luminescence applications
• Excellent optical properties
• Optimal performance
• Highest possible degree of automation
• 96 and 384 well format availbale

384 Well Polystyrene Microplates are manufactured under DIN ISO 9001 guidelines and can be traced all the way back to production through a defined LOT number system. Furthermore they are footprint compatible with automated systems. Polystyrene is a highly clear polymer with excellent optical properties which makes it ideal for precise optical measurements. An it is suitable for work with cell cultures. The improved Rounded Square Well Design allows flexible working volume of 15 - 110 μl, with the advantages of a round well, such as reduced wicking and bubbling.

Properties:

• Total volume: 131 μl
• Working volume: 15 - 110 μl
• Lid enables gas exchange with the lowest possible evaporation
• High clarity of the clear microplates for optimal microscopic examinations
• Stackable
• Alphanumeric well coding

384 Well Polystyrene Microplates are manufactured under DIN ISO 9001 guidelines and can be traced all the way back to production through a defined LOT number system. Furthermore they are footprint compatible with automated systems. Polystyrene is a highly clear polymer with excellent optical properties which makes it ideal for precise optical measurements. An it is suitable for work with cell cultures. The improved Rounded Square Well Design allows flexible working volume of 15 - 110 μl, with the advantages of a round well, such as reduced wicking and bubbling.

Properties:

• Total volume: 131 μl
• Working volume: 15 - 110 μl
• Growth area: 10 mm2
• Lid enables gas exchange with the lowest possible evaporation
• Stackable
• Alphanumeric well coding
• FLUOTRAC™ are black microplates for fluorescence measurements
• LUMITRAC™ are white microplates for luminescence measurements

Cell culture multiwell plates are available in the hydrophilic surface (TC surface treatment) for improved cell adhesion and hydrophobic surface for suspension cultures and hybridoma cells. Cell culture microplates from the CELLSTAR® range are specifically treated. This treatment leads to polar groups such as carboxyl and hydroxyl groups , added to the plastic surface. These allow the growth of adherent cell lines. They are also suitable for automated systems and contain an alphanumeric well coding. They are also suitable for footprint systems and contain an alphanumeric well coding.

Properties:

• High clarity enables optimal microscopic examinations
• Lid enables optimal gas exchange with the lowest possible evaporation
• Stackable
• Alphanumeric well coding
• Individually wrapped peel-off bags
• Consecutive lot numbering
• 384 and 1536 well foramt available

96 Well Polystyrene Microplates are manufactured under DIN ISO 9001 guidelines and can be traced all the way back to production through a defined LOT number system. Furthermore they are footprint compatible with automated systems. Polypropylene (PP) has low biomolecular binding characteristics, a high temperature tolerance, and is resistant to many standard laboratory chemicals, such as DMSO. From black polypropylene microplates for fluorescence polarisation to white microplates for scintillation proximity assays (SPA), the 96 well polypropylene range has all you need.

Properties:

• Uniform external dimensions
• Well-to-well spacing 9 mm
• Alphanumeric well coding
• High chemical resistance
• High temperature resistance (-196 °C to +121 °C)
• Sealable with adhesive films and heat sealer
• Sealable with CapMats
• F-Bottom / Chimney Well: chimney-like arrangement wells, each well stands on its own
• V-Bottom: entire sample volume must be pipetted off

Cell culture multiwell plates are available in the hydrophilic surface (TC surface treatment) for improved cell adhesion and hydrophobic surface for suspension cultures and hybridoma cells. Cell culture microplates from the CELLSTAR® range are specifically treated. This treatment leads to polar groups such as carboxyl and hydroxyl groups , added to the plastic surface. These allow the growth of adherent cell lines. They are also suitable for automated systems and contain an alphanumeric well coding. They are also suitable for footprint systems and contain an alphanumeric well coding.

Properties:

• High clarity enables optimal microscopic examinations
• Lid enables optimal gas exchange with the lowest possible evaporation
• Stackable
• Alphanumeric well coding
• Individually wrapped peel-off bags
• Consecutive lot numbering
• 384 and 1536 well foramt available

96 Well Polystyrene Microplates are manufactured under DIN ISO 9001 guidelines and can be traced all the way back to production through a defined LOT number system. Furthermore they are footprint compatible with automated systems. Polystyrene is a highly clear polymer with excellent optical properties which makes it ideal for precise optical measurements. An it is suitable for work with cell cultures.

Properties:

• F-Bottom / Chimney Well: chimney-like arrangement wells, each well stands on its own
• μClear® with ultra-thin films, without the use of adhesives or solvents
• Are analysed for detectable DNase, RNase and human DNA
• Are free of biocides and antistatics
• Are manufactured without the use of siliconbased mould release

96 Well Polystyrene Microplates are manufactured under DIN ISO 9001 guidelines and can be traced all the way back to production through a defined LOT number system. Furthermore they are footprint compatible with automated systems. Polystyrene is a highly clear polymer with excellent optical properties which makes it ideal for precise optical measurements. An it is suitable for work with cell cultures.

Properties:

• F-Bottom / Chimney Well: chimney-like arrangement wells, each well stands on its own
• FLUOTRAC™ are black microplates for fluorescence measurements
• LUMITRAC™ are white microplates for luminescence measurements
• medium binding microplate is more hydrophobic than the surface of a high binding microplate
• Are analysed for detectable DNase, RNase and human DNA
• Are free of biocides and antistatics
• Are manufactured without the use of siliconbased mould release

Streptavidin-coated solid phases serve as reliable binding surfaces for all types of biotinylated molecules. Numerous ligands can be biotinylated simply and due to the low molecular weight of biotin (244 Da) the functionality of the molecules is normally not impaired.

Propporties:

• Shelf-life: 3 years at room temperature
• Pre-blocking: All plates are pre-blocked and ready-to-use
• Streptavidin-coating 96 well 300 μl
• Streptavidin-coating 384 well 90 μl
• Rapidly isolate, determine and quantify components from a reaction mixture
• Complete reaction chains on a streptavidin solid phase is possible
• Bound to the plate surface in a uniform and stable layer

Idealny do uszczelniania płytek PCR.

• Czystość PCR: Certyfikowane jako wolne od ludzkiego DNA, DNazy, RNazy i inhibitora PCR
• PCR Film: Umożliwia wizualne monitorowanie próbek
• Folia PCR: Łatwa do przekłucia, nie przykleja się do końcówek pipet (idealna do systemów automatycznych)
• Uszczelnianie termiczne: Umieść folię lub film krawędziami klejącymi na płytce. Uszczelnij płytkę za pomocą zgrzewarki termicznej
• Maty uszczelniające są wielokrotnego użytku i nadają się do autoklawowania

Accessories

Płytki mikrotitracyjne do testów immunologicznych z powierzchniami do wiązania powinowactwa (pasywna streptawidyna i streptawidyna immobilizująca, chelat niklowy i glutation, BioBind).

• Współdziałanie streptawidyny z biotyną występującą u szerokiej gamy biocząsteczek
• Wysoce specyficzna powierzchnia wiążąca
• Poprawa stosunku sygnału do szumu
• Mikropłytki 96-dołkowe: Objętość robocza 100 µl/dołek, całkowita objętość 350-400 µl/dołek
• Mikropłytki 384-dołkowe: Objętość robocza 50 µl/dołek, całkowita objętość 120 µl/dołek.

Opracowane dla ilościowych i jakościowych testów immunologicznych w fazie stałej, np. techniki ELISA.

• Systemy oznakowania alfanumerycznego
• Standardowy format 128 x 86 mm
• Wysoka jakość optyczna
• Cztery możliwości wyboru kształtu dna: płaskie (F), okrągłe (U), zaokrąglone (C) lub StarWell™
• Ramki i moduły dostępne osobno
• Moduły pozostają w ramce po odwróceniu
• Dostępne są również taśmy uszczelniające i zatyczki paskowe
• Dołączony certyfikat powtarzalności wiązania
• Wolnostojący moduł

Wybór różnych powierzchni:
PolySorp™, Immulon™ 1B i Universal Binding (UB) służą do absorpcji cząsteczek hydrofobowych.
Medisorp™ i Immulon 2HB są lekko hydrofilowe i wiążą różne biocząsteczki.
MaxiSorp™, Immulon 4 HBX i Enhanced Binding (EB) są hydrofilowe i idealne do testów typu "sandwich" z przeciwciałami.
MultiSorp™ są wysoce hydrofilowe i odpowiednie dla glikanów i białek rozpuszczalnych w wodzie.

Lids offer protection against contamination and evaporation during sample storage and cell cultivation. Four different polystyrene lids are available. High profile without condensation rings is mainly used for non TC-treated 96 well microplates. High profile with condensation rings is recommended for cell culture applications, since it ensures an optimum oxygen supply to cultivated cells due to improved gas exchange. Low profile lids contents are protected against evaporation and contamination, and the covered microplates can be easily gripped on the side in automated processes. Universal ultra low profile lids is compatible with a whole range of different microplates, provides the greatest possible protection against evaporation, and is also suitable for use in automated systems.

Properties:

• Endotoxin-free
• Free of detectable DNase, RNase, human DNA
• All sterile lids are non-cytotoxic

Cell culture multiwell plates are available in the hydrophilic surface (TC surface treatment) for improved cell adhesion and hydrophobic surface for suspension cultures and hybridoma cells. Cell culture microplates from the CELLSTAR® range are specifically treated. This treatment leads to polar groups such as carboxyl and hydroxyl groups , added to the plastic surface. These allow the growth of adherent cell lines. They are also suitable for automated systems and contain an alphanumeric well coding. They are also suitable for footprint systems and contain an alphanumeric well coding.

Properties:

• High clarity enables optimal microscopic examinations
• Lid enables optimal gas exchange with the lowest possible evaporation
• Stackable
• Alphanumeric well coding
• Individually wrapped peel-off bags
• Consecutive lot numbering
• 384 and 1536 well foramt available

96 Well Polystyrene Microplates are manufactured under DIN ISO 9001 guidelines and can be traced all the way back to production through a defined LOT number system. Furthermore they are footprint compatible with automated systems. Polypropylene (PP) has low biomolecular binding characteristics, a high temperature tolerance, and is resistant to many standard laboratory chemicals, such as DMSO. From black polypropylene microplates for fluorescence polarisation to white microplates for scintillation proximity assays (SPA), the 96 well polypropylene range has all you need.

Properties:

• Uniform external dimensions
• Well-to-well spacing 9 mm
• Alphanumeric well coding
• High chemical resistance
• High temperature resistance (-196 °C to +121 °C)
• Sealable with adhesive films and heat sealer
• Sealable with CapMats

White and black versions are available on request.

Alternative Płytka 384/1536-dołkowa z pokrywą, PS Alternative Płytki mikrotitracyjne PS

Non-binding surfaces from Greiner Bio-One are achieved through a stable chemical modification to covalently link functional groups with the base polystyrene polymer. Under aqueous assay conditions a hydrate layer forms, preventing dissolved biomolecules from binding to the microplate surface. As the non-binding surface is stable under common assay conditions, there is no potential for degradation or leaching and resultant assay interference.

Properties:

• Äußerst geringe, nicht-spezifische Biomolekülbindung (Proteine, DNA, RNA)
• Langfristige Oberflächenbeständigkeit ohne Degeneration oder Auswaschen
• Hohe Testsensitivität mit reduziertem Hintergrund

384 Well Polystyrene Microplates are manufactured under DIN ISO 9001 guidelines and can be traced all the way back to production through a defined LOT number system. Furthermore they are footprint compatible with automated systems. Polypropylene (PP) has low biomolecular binding characteristics, a high temperature tolerance, and is resistant to many standard laboratory chemicals, such as DMSO. From black polypropylene microplates for fluorescence polarisation to white microplates for scintillation proximity assays (SPA), the 96 well polypropylene range has all you need. The improved Rounded Square Well Design allows flexible working volume of 15 - 110 μl, with the advantages of a round well, such as reduced wicking and bubbling.

Properties:

• Total volume: 131 μl
• Working volume: 15 - 110 μl
• Growth area: 10 mm2
• Lid enables gas exchange with the lowest possible evaporation
• Stackable
• Alphanumeric well coding

We set high standards on the quality of our immunological products, especially on consistency and reproducibility of binding properties. The incoming raw material used for ELISA microplates is routinely monitored for identity and immunological quality. All ELISA are ideally suited for optical measurements. Two surface qualities offers for ELISA
microplates: the hydrophilic high binding products and the less hydrophilic medium binding products.

Proporties:

• Manufactured from crystal clear polystyrene
• Compatible with automated systems
• High-throughput manner
• Cost-effective
• Results rapid available

Non-binding surfaces from Greiner Bio-One are achieved through a stable chemical modification to covalently link functional groups with the base polystyrene polymer. Under aqueous assay conditions a hydrate layer forms, preventing dissolved biomolecules from binding to the microplate surface. As the non-binding surface is stable under common assay conditions, there is no potential for degradation or leaching and resultant assay interference.

Properties:

• Äußerst geringe, nicht-spezifische Biomolekülbindung (Proteine, DNA, RNA)
• Langfristige Oberflächenbeständigkeit ohne Degeneration oder Auswaschen
• Hohe Testsensitivität mit reduziertem Hintergrund

SCREENSTAR microplates are specialised products for sophisticated microscopic
applications, in high content screening (HCS) or high resolution microscopy with water and oil immersion objectives. They combine outstanding glass-like optical properties with an excellent surface for adherent cell culture. Display excellent optical properties with reduced autofluorescence in the lower UV range and low birefringence. Enable complete periphery access for high magnification objectives.

Proporties:

• 190 μm ultraclear cycloolefin film bottom
• refractive index of 1.53 comparable to glass
• Recessed microplate bottom allows low working distance and high aperture
• Round well geometry to reduce optical distortions
• Smooth microplate top absent improves heat sealing
• Are available in 96, 384 and 1536 well format

In the case of concentration determinations in microplates, the measurement is made vertically and the layer thickness of the sample to be measured is dependent on the sample volume. Even with smaller sample volumes, the resulting layer thicknesses are sufficient for precise measurement. At a constant sample volume, concentrations can be determined with the aid of a calibration curve.

Properties:

• Optical window down to 230 nm ideal for nucleic acid determinations at 260 nm/280 nm
• For measurements of protein concentration at 280 nm
• Transmission measurements with UV light up to 230 nm
• DMSO-resistant
• Stored at -20 °C without any problem

For the propagation of fastidious cells like primary or sensitive cells as well as cells cultivated under restricted growth conditions. Furthermore, the Advanced TC™ surface facilitates consistent and homogenous cell attachment increasing the overall cell yield and reducing cell loss, for example during automated washing steps. Moreover, cells cultivated on the Advanced TC™ surface exhibit higher transgene activity after gene transfer / insertion. Due to the production process, the modification of the polymer assures consistant and reproducible product quality. Transport and storage can be carried out at room temperature.

Proporties:

• For particularly demanding cells
• Consistent cell attachment
• Homogenous cell growth, for example during automated washing steps
• non-cytotoxic and free of detectable DNase, RNase and human DNA and endotoxins

Microplates in strip format offer the advantage of greater flexibility in diagnostics. Individual strips can be removed from the support frame so that the number of tests to be performed can be adjusted to the number of samples, and is not predetermined by the microplate format used. In addition, the individual strips of a microplate can be subjected to a wide variety of different test conditions.

Proporties:

• Strips mounted in frame
• U-Bottom: no corners, therefore simple and clean pipetting
• F-Bottom: ideal for the most precise optical measurements

Płytki mikrotitracyjne do testów immunologicznych z powierzchniami do wiązania kowalencyjnego. Z głównym ukierunkowaniem na peptydy. Objętość robocza 100 µl/dołek, całkowita objętość 350-400 µl/dołek.

• Minimalne wypłukiwanie
• Odporne na intensywne płukanie
• Kontrolowane wyrównanie

Płytki Protein LoBind są specjalnie zaprojektowane do proteomiki i innych obszarów badań nad białkami. Nadają się do przygotowywania lub przechowywania próbek białek, peptydów lub przeciwciał, testów enzymatycznych, przechowywania roztworów zapasowych wirusów lub zawiesin komórkowych oraz przetwarzania próbek w toksykologii.

• Studzienki z dnem w kształcie litery V
• Kontrastowe, alfanumeryczne oznaczenia
• Studzienki przezroczyste z białą ramką
• Zaokrąglona konstrukcja studzienek RecoverMax^®
• Podwyższone ramy studzienek dla niezawodnego uszczelnienia
• Czysty PCR: wolny od ludzkiego DNA, DNaz, RNaz i inhibitorów PCR

Alternative Microplates Protein LoBind, 384-well, PP, with barcode

Odpowiednie do przechowywania i przygotowywania próbek, analizy białek i genotypowania.

• Kontrastowe alfanumeryczne oznaczenia
• Przezroczyste studzienki z białą ramką
• Zaokrąglona konstrukcja studzienek RecoverMax^®
• Podwyższone ramy studzienek dla niezawodnego uszczelnienia, nawet przy zgrzewaniu na ciepło
• Odporność na temperaturę od -86 °C do 100 °C
• Możliwość autoklawowania (121 °C, 20 min)
• Odporność na wirowanie do 6000 × g
• PCR clean: bez ludzkiego DNA, DNaz, RNaz i inhibitorów PCR lub sterylne

Alternative Microplates, 96/384-well, PP, with barcode Alternative Microplates, 96/384-well, PP, PCR clean

Do pomiarów absorpcji w zakresie widzialnym i UV, fluorescencji i chemiluminescencji, koncentracji DNA i białek z użyciem barwników absorpcyjnych lub fluorescencyjnych, testów komórkowych, testów żywotności komórek i apoptozy. Mikropłytki UV-VIS posiadają ultracienkie, foliowe dno zapewniające dobrą przepuszczalność światła w zakresie UV. Czarne mikropłytki Eppendorf oferują dobry stosunek sygnału do szumu. Białe mikropłytki Eppendorf są zoptymalizowane pod kątem najwyższej czułości w wykrywaniu sygnałów luminescencyjnych poprzez maksymalizację odbicia światła.

Alternative Microplates, 96/384-well, PCR clean, with barcode Alternative

Przezroczyste, białe lub czarne płytki 96-dołkowe, z płaskim dnem, o doskonałych właściwościach optycznych. Modyfikacje powierzchni: Nunclon™Δ, pokryte kolagenem typu I lub Poli-D-Lizyną. Przeznaczone do hodowli komórkowych.
Płytki wykonane z polistyrenu.
Objętość całkowita: 400 µl/dołek

• V-shape provides optimal recovery of reagents
• Shared wall technology increases well volume and wider cells improve mixing
• Ideal as collection plate for Nunc Filter Plates
• Low binding for homogeneous assays and storage

ALPS 50V zapewnia bezpieczną, kontrolowaną metodę zgrzewania płytek z próbkami wykonanymi z różnych tworzyw sztucznych. Zgrzewarka posiada regulację czasu i temperatury zgrzewania oraz wizualny wyświetlacz odliczający czas podczas procesu zgrzewania. ALPS 50V może zgrzewać płytki głębokie (Bioblocks) z różnymi termicznie zgrzewanymi foliami. Może być przystosowana do zgrzewania mikropłytek i płytek PCR przy użyciu odpowiedniego nośnika płytek.

Specyfikacja
Zakres nastawy temperatury:	125 do 200 °C w odstępach co 1 °C
Zakres nastawy czasu:	1 do 9 sek. w odstępach co 0,5 sek.
Zakres wilgotności roboczej:	20 do 80 % bez kondensacji
Temperatura pracy:	18 do 30 °C
Rozmiar (szer. x gł. x wys.):	220 x 321 x 425 mm
Waga:	7,2 kg
Zasilanie:	IEC 320, 100-130 VAC, 50/60 Hz lub 220-240 VAC, 50/60 Hz, maks. 350 W
Normy:	FCC klasa A, CFR 47 część 15 BS EN 61326:1998

Alternative Zgrzewarki półautomatyczne, AccuSeal