-
- General laboratory consumables
- Occupational safety, Security
- Analytical measurement and testing
- Stirring, Shaking, Mixing
- Sample preparation
- Distillation, separation, filtration
- Heating and cooling technology
- Liquid Handling
- Vacuum technology, Drying, Dry storage
- Optical instruments and microscopes
- Cleaning and sterilisation
- Environmental-, soil-, water-, food analysis
- Chromatography
- Cleanroom
Spoons, Spatulas
With natural rubber / TEF septa
Crimp seals ND11 are made of aluminium. They are clear or lacquered in different colours and have a 5.5 mm hole. They are supplied with fitted septa made of a variety of materials.
These septa are temperature-resistant from -40 °C to 120 °C and ideal for multiple injections thanks to their excellent resealability properties....
Short thread vials and micro-vials ND9, wide opening
Short thread vials and micro-vials ND9 are available in clear and amber first hydrolytic class glass and can be used on almost all autosamplers. You can replace other 1.5 ml vial types like 11 mm crimp neck vials, 8-425 and 10-425 screw neck vials, which can help rationalize stocks.
...
With silicone / PTFE septa
Crimp seals ND11 are made of aluminium. They are clear or lacquered in different colours and have a 5.5 mm hole. They are supplied with fitted septa made of a variety of materials.
These septa are temperature-resistant from -60 °C to 200 °C and have a better purity than septa made of natural rubber or red rubber. However, they have less effective resealability properties and are therefore more suitable for single-injection applications....
With RedRubber / PTFE septa
Short thread screw seals ND9 are made of PP and are supplied with fitted septa made of a variety of materials. They have a 6 mm centre hole and are available in different colours. The screw caps are similar in shape to the crimp caps and are therefore also suitable for robotic handling.
These septa are temperature-resistant from -40 °C to 110 °C. They are easier to penetrate and have lower particle formation than septa made of natural rubber....
With silicone / PTFE septa
Short thread screw seals ND9 are made of PP and are supplied with fitted septa made of a variety of materials. They have a 6 mm centre hole and are available in different colours. The screw caps are similar in shape to the crimp caps and are therefore also suitable for robotic handling.
These septa are temperature-resistant from -60 °C to 200 °C and have better purity than septa made of natural rubber, butyl or red rubber. However, they have less effective resealability properties and are therefore more suitable for single-injection applications. Septa with a double-sided PTFE coating show a very low particle formation during penetration....
Screw neck vials and micro-vials ND8, small opening
Screw neck vials and micro-vials ND8 are available in clear and amber first hydrolytic class glass. They have a 8-425 thread and are used as standard in GC and HPLC applications. A large selection of micro-inserts with a 5 mm diameter is available for these vials. The micro-vials often require an adapter so that they can be used in an autosampler....
With silicone / PTFE septa, Ultraclean
Crimp and headspace seals ND20 are made of aluminium and are supplied with fitted septa made of a variety of materials. There are the following different types of caps available:
Plain caps with a 10 mm center hole. These caps are suitable for standard applications. They are available in several colours on request....
Screw neck vials ND24 (EPA)
Screw neck vials ND24 made of clear and amber first hydrolytic class glass are suitable for EPA (Environmental Protection Association) analysis and can, upon request, be supplied with a sterility certificate that is specifically required for TOC analyses.
These vials are especially used with autosamplers made by Agilent, Dionex, Shimadzu, Tekmar, Thermo Scientific and Varian....
With natural rubber / TEF septa
Screw seals ND10 are made of PP and have a 10-425 thread. They have a 7 mm centre hole or are closed. Screw seals are supplied with fitted septa made of a variety of materials or without any septa.
These septa are temperature-resistant from -40 °C to 120 °C and ideal for multiple injections thanks to their excellent resealability properties....
With silicone / PTFE septa
Screw seals ND8 are made of PP and are supplied without or with fitted septa made of a variety of materials. They have a 8-425 thread, a 5.5 mm centre hole or are closed.
These septa are temperature-resistant from -60 °C to 200 °C and have better purity than septa made of natural rubber, butyl or red rubber. However, they have less effective resealability properties and are therefore more suitable for single-injection applications. Septa with a double-sided PTFE coating show a very low particle formation during penetration....
Screw neck vials ND15 / ND18
Screw neck vials ND15 and ND18 made of clear and amber first hydrolytic class glass in combination with the corresponding screw caps are highly suitable as sample storage vials.
Screw neck vials ND15 have a 15-425 thread. ND18 vials have a 18-400 thread.
Item 7.616 139 is also suitable for headspace analysis (Perkin Elmer)....
Screw neck vials ND13
Screw neck vials ND13 with 13-425 thread made of clear and amber first hydrolytic class glass facilitate easy filling with viscous substances thanks to their wide opening.
The LABSOLUTE® vials for optimised micro-sampling are the best solution for very small sample volumes....
With bromo-butyl / PTFE septa, Pharma-Fix
Crimp and headspace seals ND20 are made of aluminium and are supplied with fitted septa made of a variety of materials. There are the following different types of caps available:
Plain caps with a 10 mm center hole. These caps are suitable for standard applications. They are available in several colours on request....
With silicone / PTFE septa, Ultrabond, EPA quality
Screw seals ND24 (EPA) are made of PP and are supplied with or without fitted septa made of a variety of materials. They have a 24-400 thread, a 15 mm centre hole or are closed.
These septa are temperature-resistant from -60 °C to 200 °C and have better purity than septa made of natural rubber, butyl or red rubber. However, they have less effective resealability properties and are therefore more suitable for single-injection applications....
Crimp neck and headspace vials ND20
Crimp neck and headspace vials ND20 with rounded or flat bottom made of clear and amber first hydrolytic class glass need to be able to withstand very high internal pressures and, as a result, their walls are generally 1.2 mm thick. The vials are available with a flat DIN crimp neck or with a bevelled neck (HS neck)....
With RedRubber / PTFE septa
Screw seals ND10 are made of PP and have a 10-425 thread. They have a 7 mm centre hole or are closed. Screw seals are supplied with fitted septa made of a variety of materials or without any septa.
These septa are temperature-resistant from -40 °C to 110 °C and easier to penetrate and have lower particle formation than septa made of natural rubber....
With natural rubber / TEF septa
Snap ring seals ND11 are made of PE and are supplied with fitted septa made of a variety of materials. They are available in a soft and hard version as well as in different colours. Snap ring seals are very easy to use, time-saving and inexpensive.
These septa are temperature-resistant from -40 °C to 120 °C and ideal for multiple injections thanks to their excellent resealability properties....
With bromo-butyl / PTFE septa
Crimp and headspace seals ND20 are made of aluminium and are supplied with fitted septa made of a variety of materials. There are the following different types of caps available:
Plain caps with a 10 mm center hole. These caps are suitable for standard applications. They are available in several colours on request....
With RedRubber / PTFE septa
Crimp seals ND11 are made of aluminium. They are clear or lacquered in different colours and have a 5.5 mm hole. They are supplied with fitted septa made of a variety of materials.
These septa with instrument manufacturer's quality are temperature-resistant from -40 °C to 110 °C. They are easier to penetrate and have lower particle formation than septa made of natural rubber....
With silicone / PTFE septa
Precision thread screw seals ND18 are made of metal and supplied with fitted septa made of a variety of materials. The hole size is selected so that the cap is suitable both for SPME and headspace applications. However, enough surface is left for the magnet to be able to transport a completely filled vial. The screw-on mechanism ensures that the cap always has a flat surface so that the bottle cannot fall from the magnet. Separation of the vial and cap for disposal after analysis is much easier than with crimp caps....
Special seals for crimp neck ND8
The blue Push-On caps made of PE have a thinned penetration point, but no additional septum. They are an inexpensive alternative to crimp caps for non-critical applications.
The transparent PE caps are 9 x 5.9 mm and have a 4 mm centre hole.
Septa made of natural rubber are temperature-resistant from -40 °C to 120 °C and ideal for multiple injections thanks to their excellent resealability properties....
With silicone / PTFE septa
Snap ring seals ND11 are made of PE and are supplied with fitted septa made of a variety of materials. They are available in a soft and hard version as well as in different colours. Snap ring seals are very easy to use, time-saving and inexpensive.
These septa are temperature-resistant from -60 °C to 200 °C and have better purity than septa made of natural rubber, butyl or red rubber. However, they have less effective resealability properties and are therefore more suitable for single-injection applications....
Kits ND9
The LABSOLUTE® kits ND9 contain shrink-wrapped short thread vials ND9 made of clear or amber first hydrolytic class glass and corresponding short thread screw caps made of PP.
Kits containing Ultrabond seals are especially for the use with Waters autosamplers....
With natural rubber / TEF septa
Short thread screw seals ND9 are made of PP and are supplied with fitted septa made of a variety of materials. They have a 6 mm centre hole and are available in different colours. The screw caps are similar in shape to the crimp caps and are therefore also suitable for robotic handling.
These septa are temperature-resistant from -40 °C to 120 °C and are ideal for multiple injections thanks to their excellent resealability properties....
With silicone / PTFE septa, Ultrabond
Short thread screw seals ND9 are made of PP and are supplied with fitted septa made of a variety of materials. The caps have a 6 mm centre hole and are available in different colours. The screw caps are similar in shape to the crimp caps and are therefore also suitable for robotic handling.
...
With butyl / PTFE septa
Screw seals ND8 are made of PP and are supplied without or with fitted septa made of a variety of materials. They have a 8-425 thread, a 5.5 mm centre hole or are closed.
These septa are temperature-resistant from -40 °C to 120 °C and have excellent chemical properties with regard to cleanliness....
With natural rubber / TEF septa
Screw seals ND8 are made of PP and are supplied without or with fitted septa made of a variety of materials. They have a 8-425 thread, a 5.5 mm centre hole or are closed.
These septa are temperature-resistant from -40 °C to 120 °C and ideal for multiple injections thanks to their excellent resealability properties....
Snap ring vials and micro-vials ND11, wide opening
Snap ring vials and micro-vials ND11 made of clear and amber first hydrolytic class glass can be used on almost all autosamplers and can also be used on equipment with robotic handling.
As an alternative to snap ring seals, snap ring vials and micro-vials, ND11 can also be sealed with crimp seals ND11 since the two snap ring lips together have the same height as a crimp neck....
With butyl / PTFE septa
Screw seals ND15 are made of PP and are supplied without or with fitted septa made of a variety of materials. They have a 15-425 thread, a 9 mm centre hole or are closed.
Screw seals ND18 are made of PP and are supplied with or without fitted septa made of a variety of materials. They have a 18-400 thread, a 12 mm centre hole or are closed....
Without septa
Screw seals ND8 are made of PP and are supplied without or with fitted septa made of a variety of materials. They have a 8-425 thread, a 5.5 mm centre hole or are closed.
Suitable septa with a diameter of 8 mm made of different materials are available on request....
With butyl / PTFE septa
Screw seals ND13 are made of PP and have a 13-425 thread. They have a 8.5 mm centre hole or are closed. Screw seals are supplied with fitted septa made of a variety of materials or without any septa.
These septa are temperature-resistant from -40 °C to 120 °C and have excellent chemical properties....
Precision thread headspace vials ND18
Precision thread headspace vials ND18 made of clear and amber first hydrolytic class glass are a practical alternative to the corresponding crimp neck vials ND20. Thanks to its many thread turns, the precision thread ensures that the septum is pressed firmly against the glass neck, keeping the vial gas-tight....
With silicone / PTFE septa, EPA quality
Screw seals ND24 (EPA) are made of PP and are supplied with or without fitted septa made of a variety of materials. They have a 24-400 thread, a 15 mm centre hole or are closed.
These septa are temperature-resistant from -60 °C to 200 °C and have better purity than septa made of natural rubber, butyl or red rubber. However they have less effective resealability properties and are therefore more suitable for single-injection applications....
Without septa
Screw seals ND13 are made of PP and have a 13-425 thread. They have a 8.5 mm centre hole or are closed. Screw seals are supplied with fitted septa made of a variety of materials or without any septa.
Suitable septa with a diameter of 12 mm made of different materials are available on request....
With butyl / PTFE septa
Screw seals ND24 (EPA) are made of PP and are supplied with or without fitted septa made of a variety of materials. They have a 24-400 thread, a 15 mm centre hole or are closed.
These septa are temperature-resistant from -40 °C to 120 °C and have excellent chemical properties....
With butyl / PTFE septa
Precision thread screw seals ND18 are made of metal and supplied with fitted septa made of a variety of materials. The hole size is selected so that the cap is suitable both for SPME and headspace applications. However, enough surface is left for the magnet to be able to transport a completely filled vial. The screw-on mechanism ensures that the cap always has a flat surface so that the bottle cannot fall from the magnet. Separation of the vial and cap for disposal after analysis is much easier than with crimp caps....
With silicone / aluminium septa
Screw seals ND24 (EPA) are made of PP and are supplied with or without fitted septa made of a variety of materials. They have a 24-400 thread, a 15 mm centre hole or are closed.
These septa are temperature-resistant from -60 °C to 220 °C and have better purity than septa made of natural rubber or red rubber. However, they have less effective resealability properties and are therefore more suitable for single-injection applications. The silicone is fully coated with a silver aluminium foil....
With RedRubber / PTFE septa
Screw seals ND8 are made of PP and are supplied without or with fitted septa made of a variety of materials. They have a 8-425 thread, a 5.5 mm centre hole or are closed.
These septa are temperature-resistant from -40 °C to 110 °C and easier to penetrate and have lower particle formation than septa made of natural rubber....
With silicone / PTFE septa, magnetic
Short thread screw seals ND9 are made of PP and are supplied with fitted septa made of a variety of materials. They have a 6 mm centre hole and are available in different colours. The screw caps are similar in shape to the crimp caps and are therefore also suitable for robotic handling.
These short thread screw seals have a mounted magnetic sleeve (gold colour). They are more convenient and secure to handle than 11 mm magnetic crimp seals. The septa are temperature-resistant from -60 °C to 200 °C. The caps have been officially tested and approved for CTC....
Without septa
Screw seals ND24 (EPA) are made of PP and are supplied with or without fitted septa made of a variety of materials. They have a 24-400 thread, a 15 mm centre hole or are closed.
Suitable septa with a diameter of 22 mm made of different materials are available on request....
Short thread vials and micro-vials ND9, SureStop
The short thread vials ND9 SureStop are available in clear and amber first hydrolytic class glass and are the best available on the market in terms of seal tightness and reliability. The vials have an additional stopper ring at the end of the thread which clearly marks the end point in the screwing-in process. This ensures that the tightness of the seal is independent of the touch or feel of the user screwing the stopper in. This ensures the lowest possible number of standard deviations and high reproducibility of analysis results....
Kits ND9, certified
These kits correspond to the standard ND9 kits with regard to their setup (shrink-wrapped short thread vials ND9 made of clear or amber first hydrolytic class glass with corresponding short thread screw caps made of PP). But there is a batch-specific test certificate with HPLC and GC chromatographs for every kit available on request. Certified kits are delivered completely shrink-wrapped. This means additional safety for the end user....
Micro-inserts for vials with wide opening, glass
The micro-inserts made of first hydrolytic class glass are suitable for
- Short thread vials ND9, with wide opening made of glass or plastic
- Screw neck vials ND10, with wide opening
- Crimp neck vials ND11, with wide opening
- Snap ring vials ND11, with wide opening
- Shell vials, with a nominal volume of 2 ml
Kits ND8
The LABSOLUTE® kits ND8 contain shrink-wrapped screw vials ND8 with small opening made of clear or amber first hydrolytic class glass and corresponding screw caps made of PP. In some cases, caps are already pre-screwed on the vials.
- Many kits are especially adjusted for use with an autosampler of one defined manufacturer
- Kits with pre-screwed seals reduce the risk of sample contamination
- Kits with pre-assembled micro inserts are available on request
With butyl / PTFE septa
Crimp seals ND11 are made of aluminium. They are clear or lacquered in different colours and have a 5.5 mm hole. They are supplied with fitted septa made of a variety of materials.
These septa are temperature-resistant from -40 °C to 120 °C and have excellent chemical properties.
Septa with a double-sided PTFE coating show a very low particle formation during penetration....
Glass
The shell vials made of clear or amber first hydrolytic class glass come in a set with transparent PE plugs. The star-shaped diaphragm in the plug facilitates easy penetration.
Shell vials made of plastic are a shatter-proof alternative to glass vials. They also come with a PE plug.
...
Septa, 8 mm
The choice of the right septa depends on the application. Many septa are PTFE coated on one side. PTFE is highly resistant against many chemicals and forms an inert border between the sample and the base material of the septa.
The septa's base material has various physical and chemical properties, like temperature resistance, resealability, cleanliness, hardness and thickness....
With silicone / PTFE septa, HT quality
Crimp and headspace seals ND20 are made of aluminium and are supplied with fitted septa made of a variety of materials. There are the following different types of caps available:
Plain caps with a 10 mm center hole. These caps are suitable for standard applications. They are available in several colours on request....
Without septa
Crimp and headspace seals ND20 are made of aluminium and are supplied with fitted septa made of a variety of materials. There are the following different types of caps available:
Plain caps with a 10 mm center hole. These caps are suitable for standard applications. They are available in several colours on request....
With chloro-butyl septa
Crimp and headspace seals ND20 are made of aluminium and are supplied with fitted septa made of a variety of materials. There are the following different types of caps available:
Plain caps with a 10 mm center hole. These caps are suitable for standard applications. They are available in several colours on request....
With RedRubber / PTFE septa
Snap ring seals ND11 are made of PE and are supplied with fitted septa made of a variety of materials. They are available in a soft and hard version as well as in different colours. Snap ring seals are very easy to use, time-saving and inexpensive.
These septa with instrument manufacturer's quality are temperature-resistant from -40 °C to 110 °C. They are easier to penetrate and have lower particle formation than septa made of natural rubber....
With natural rubber / TEF septa
Screw seals ND13 are made of PP and have a 13-425 thread. They have a 8.5 mm centre hole or are closed. Screw seals are supplied with fitted septa made of a variety of materials or without any septa.
These septa are temperature-resistant from -40 °C to 120 °C and ideal for multiple injections thanks to their excellent resealability properties....
With natural rubber / TEF septa
Crimp seals ND8 are made of aluminium. They are plain lacquered with a 4 mm hole and supplied with fitted septa made of a variety of materials.
These septa are temperature-resistant from -40 °C to 120 °C and ideal for multiple injections thanks to their excellent resealability properties....
With silicone / PTFE septa
Screw seals ND10 are made of PP and have a 10-425 thread. They have a 7 mm centre hole or are closed. Screw seals are supplied with fitted septa made of a variety of materials or without any septa.
These septa are temperature-resistant from -60 °C to 200 °C and have better purity than septa made of natural rubber, butyl or red rubber. However, they have less effective resealability properties and are therefore more suitable for single-injection applications....
With silicone / PTFE septa
Screw seals ND13 are made of PP and have a 13-425 thread. They have a 8.5 mm centre hole or are closed. Screw seals are supplied with fitted septa made of a variety of materials or without any septa.
These septa are temperature-resistant from -60 °C to 200 °C and have better purity than septa made of natural rubber, butyl or RedRubber. However, they have less effective resealability properties and are therefore more suitable for single-injection applications....
Septa, 20 mm
The choice of the right septa depends on the application. Many septa are PTFE coated on one side. PTFE is highly resistant against many chemicals and forms an inert border between the sample and the base material of the septa.
The septa's base material has various physical and chemical properties, like temperature resistance, resealability, cleanliness, hardness and thickness....
Crimp neck vials and micro-vials ND8
Crimp neck vials and micro-vials ND8 are available in clear and amber first hydrolytic class glass. They can be sealed with 8 mm crimp caps, 9 mm PE caps or 8 mm push-on caps. The micro-vials often require an adapter so that they can be used in an autosampler.
These vials are especially used with autosamplers made by Beckman, CTC, Gilson, Knauer, Shimadzu, Spark, Varian and VWR/Hitachi....
With silicone / PTFE septa
Crimp seals ND8 are made of aluminium. They are plain lacquered with a 4 mm hole and supplied with fitted septa made of a variety of materials.
These septa are temperature-resistant from -60 °C to 200 °C and have better purity than septa made of natural rubber or red rubber. However, they have less effective resealability properties and are therefore more suitable for single-injection applications. Septa with a double-sided PTFE coating show a very low particle formation during penetration....
With pure PTFE septa
Short thread screw seals ND9 are made of PP and are supplied with fitted septa made of a variety of materials. They have a 6 mm centre hole and are available in different colours. The screw caps are similar in shape to the crimp caps and are therefore also suitable for robotic handling.
These septa are temperature-resistant from -200 °C to 260 °C. They are very thin and hard and characterized by high analytical purity. However, they have less effective resealability properties and are therefore only suitable for single-injection applications....
Without septa
Screw seals ND10 are made of PP and have a 10-425 thread. They have a 7 mm centre hole or are closed. Screw seals are supplied with fitted septa made of a variety of materials or without any septa.
Suitable septa with a diameter of 10 mm made of different materials are available on request....
22 x 9.1 mm, 4.3 mm centre hole
These caps made of transparent PE are generally used to seal washing bottles of autosamplers, but also for intermediate closure when collecting samples out in the field. They are available in three different dimensions with several septa.
Suitable for the following vials:
7.612 175, 7.620 146, 7.621 813, 6.204 710, 7.620 148, 7.620 147, 7.612 926, 7.615 808, 7.616 552 and 7.616 883....
Kit for titration according to Karl-Fischer
The LABSOLUTE® kit ND20 consists of crimp neck vials made of clear glass of the first hydrolytic class and corresponding aluminum crimp closures with an ultraclean septum made of silicone/PTFE. The special dimensions of the vials and the modification of the closures are perfectly adapted for the use with the Metrohm 774 & 874 Oven Sample Processor for the determination of the water content according to Karl-Fischer....
Kits ND11, crimp neck
The LABSOLUTE® kits ND11 contain shrink-wrapped crimp neck vials ND11 made of clear or amber first hydrolytic class glass and corresponding crimp caps made of clear lacquered aluminum with 5.5 mm centre hole.
Septa with a double-sided PTFE coating show a very low particle formation during penetration....
LLG-2in1 KITs with Screw Neck Vials ND8 (small opening)
2in1 KITs contain 100 vials (1.5 ml) and 100 closures in an orange PP-Box. As both components are always required at the same time, 2in1 KITs are a convenient way to obtain and store all required items for analysis. All advantages of the individual components (cleanroom packaging of the vials, recloseability of the packaging, etc.) remain unchanged....
With silicone / PTFE septa
Screw seals ND15 are made of PP and are supplied without or with fitted septa made of a variety of materials. They have a 15-425 thread, a 9 mm centre hole or are closed.
Screw seals ND18 are made of PP and are supplied with or without fitted septa made of a variety of materials. They have a 18-400 thread, a 12 mm centre hole or are closed....
With silicone / aluminium septa
Crimp and headspace seals ND20 are made of aluminium and are supplied with fitted septa made of a variety of materials. There are the following different types of caps available:
Plain caps with a 10 mm center hole. These caps are suitable for standard applications. They are available in several colours on request....
Septa, 12 mm
The choice of the right septa depends on the application. Many septa are PTFE coated on one side. PTFE is highly resistant against many chemicals and forms an inert border between the sample and the base material of the septa.
The septa's base material has various physical and chemical properties, like temperature resistance, resealability, cleanliness, hardness and thickness....
Standard well plates, 96 positions
All well plates made of PP and sealmats are fully chromatography tested. There are several advantages compared to usual vials and caps. Furthermore, the SBS/ANSI footprint assures compatibility with all well plate capable prep stations and chromatography autosamplers.
Well plates and sealmats are suitable for polar and non-polar solvents, in case of very critical analysis and very low sample concentrations....
22 x 8.4 mm, 4.3 mm centre hole
These caps made of transparent PE are generally used to seal washing bottles of autosamplers, but also for intermediate closure when collecting samples out in the field. They are available in three different dimensions with several septa.
Suitable for the following vials:
7.620 798, 7.615 908, 7.613 328 and 7.613 394....
22 x 9.1 mm, 6.0 mm centre hole
These caps made of transparent PE are generally used to seal washing bottles of autosamplers, but also for intermediate closure when collecting samples out in the field. They are available in three different dimensions with several septa.
Suitable for the following vials:
7.612 175, 7.620 146, 7.621 813, 6.204 710, 7.620 148, 7.620 147, 7.612 926, 7.615 808, 7.616 552 and 7.616 883....
Kits ND13
The LABSOLUTE® kits ND13 contain shrink-wrapped screw vials ND13 made of clear or amber first hydrolytic class glass and corresponding screw caps made of PP.
Septa with a double-sided PTFE coating show a very low particle formation during penetration.
Further kits are available on request....
Block covers, 96 positions
All well plates made of PP and sealmats are fully chromatography tested. There are several advantages compared to usual vials and caps. Furthermore, the SBS/ANSI footprint assures compatibility with all well plate capable prep stations and chromatography autosamplers.
Well plates and sealmats are suitable for polar and non-polar solvents, in case of very critical analysis and very low sample concentrations....
With butyl / PTFE septa
Crimp and headspace seals ND20 are made of aluminium and are supplied with fitted septa made of a variety of materials. There are the following different types of caps available:
Plain caps with a 10 mm center hole. These caps are suitable for standard applications. They are available in several colours on request....
With Viton septa
Crimp and headspace seals ND20 are made of aluminium and are supplied with fitted septa made of a variety of materials. There are the following different types of caps available:
Plain caps with a 10 mm center hole. These caps are suitable for standard applications. They are available in several colours on request....
Crimp seals ND13
Crimp seals ND13 are made of aluminium. They are clear lacquered and have a 6 mm centre hole, a centre tear-off or complete tear-off. They are supplied with fitted septa made of a variety of materials.
The septa made of silicone white/PTFE red are temperature-resistant from -60 °C to 200 °C and have better purity than septa made of natural rubber, butyl or red rubber. However, they have less effective resealability properties and are therefore more suitable for single-injection applications....
Crimping tools
The crimping and decapping tools feature a chemically resistant surface lacquer that has been developed especially for use in the laboratory. Additionally, the crimping tools have hardened closing jaws with a special alloy that guarantee a long service life. The crimping pressure and crimping height of the crimping tools can also be adapted to the design of the crimp neck and septal thickness....
Crimping tool, electronic
Electronic crimpers and decappers provide secure, reproducible crimps and quick and easy removal of aluminium seals. The tools can be used quite mobile because of the built-in rechargeable long life lithium ion battery. Ergonomic design and push button operation eliminates wrist strain especially at large sample series. Adjustable crimp settings make the crimping tool compatible with most vial/seal combinations. The adjusted crimping pressure can be seen easily at any time. A brush-less gear technology guarantees a longer lifetime and less particle emission....
Decapping tool, electronic
Electronic crimpers and decappers provide secure, reproducible crimps and quick and easy removal of aluminium seals. The tools can be used quite mobile because of the built-in rechargeable long life lithium ion battery. Ergonomic design and push button operation eliminates wrist strain especially at large sample series. Adjustable crimp settings make the crimping tool compatible with most vial/seal combinations. The adjusted crimping pressure can be seen easily at any time. A brush-less gear technology guarantees a longer lifetime and less particle emission....
GC Injection Port Septa
The GC septa are universal and longlife. They are delivered in resealable screw neck vials of 1
st hydrolytic class and ready-to-use. You have several advantages using our GC septa:
- Suitable for inlet temperatures up to 400 °C
- Low release of siloxanes
- Good penetration and sealing properties
- No sticking to hot surfaces
LLG-2in1 KITs with Short Thread Vials ND9 (wide opening)
2in1 KITs contain 100 vials (1.5 ml) and 100 closures in an orange PP-Box. As both components are always required at the same time, 2in1 KITs are a convenient way to obtain and store all required items for analysis. All advantages of the individual components (cleanroom packaging of the vials, recloseability of the packaging, etc.) remain unchanged....
Micro-inserts for shell vials
The shell vials made of clear or amber first hydrolytic class glass come in a set with transparent PE plugs. The star-shaped diaphragm in the plug facilitates easy penetration.
Shell vials made of plastic are a shatter-proof alternative to glass vials. They also come with a PE plug.
...
Micro-inserts for vials with wide opening, PP
The micro-inserts made of transparent PP are suitable for
- Short thread vials ND9, with wide opening made of glass or plastic
- Screw neck vials ND10, with wide opening
- Crimp neck vials ND11, with wide opening
- Snap ring vials ND11, with wide opening
- Shell vials, with a nominal volume of 2 ml
MS short thread screw seal ND9
This transparent seal is certified for GC/MS and LC/MS applications. It has a thinned penetration area and a diaphragm. There is no bleeding, and the seal is fully inert. Therefore a contamination of the sample is impossible. Nevertheless the screw cap is as easy to penetrate as a normal septum and just as tight....