Vials, Septa

Snap ring vials and micro-vials ND11 made of clear and amber first hydrolytic class glass can be used on almost all autosamplers and can also be used on equipment with robotic handling.

As an alternative to snap ring seals, snap ring vials and micro-vials, ND11 can also be sealed with crimp seals ND11 since the two snap ring lips together have the same height as a crimp neck.

Vials with snap ring seal are only recommended for HPLC.

The blue Push-On caps made of PE have a thinned penetration point, but no additional septum. They are an inexpensive alternative to crimp caps for non-critical applications.

The transparent PE caps are 9 x 5.9 mm and have a 4 mm centre hole.

Septa made of natural rubber are temperature-resistant from -40 °C to 120 °C and ideal for multiple injections thanks to their excellent resealability properties.

Screw seals ND24 (EPA) are made of PP and are supplied with or without fitted septa made of a variety of materials. They have a 24-400 thread, a 15 mm centre hole or are closed.

These septa are temperature-resistant from -60 °C to 200 °C and have better purity than septa made of natural rubber, butyl or red rubber. However they have less effective resealability properties and are therefore more suitable for single-injection applications.

Snap cap vials ND18/ND22 are made of clear third hydrolytic class glass. They are easy to handle and can be opened and sealed very quickly. Transparent PE caps have to be ordered separately.

The LABSOLUTE® kits ND9 contain shrink-wrapped short thread vials ND9 made of clear or amber first hydrolytic class glass and corresponding short thread screw caps made of PP.

Kits containing Ultrabond seals are especially for the use with Waters autosamplers.

Screw seals ND24 (EPA) are made of PP and are supplied with or without fitted septa made of a variety of materials. They have a 24-400 thread, a 15 mm centre hole or are closed.

These septa are temperature-resistant from -40 °C to 120 °C and have excellent chemical properties.

Precision thread screw seals ND18 are made of metal and supplied with fitted septa made of a variety of materials. The hole size is selected so that the cap is suitable both for SPME and headspace applications. However, enough surface is left for the magnet to be able to transport a completely filled vial. The screw-on mechanism ensures that the cap always has a flat surface so that the bottle cannot fall from the magnet. Separation of the vial and cap for disposal after analysis is much easier than with crimp caps.

Closed caps in combination with precision thread screw vials ND18 are ideal for sample storage.

Precision thread screw seals are not suitable for item 7.616 139 !

Septa are temperature-resistant from -60 °C to 200 °C and have better purity than septa made of natural rubber or red rubber. However, they have less effective resealability properties and are therefore more suitable for single-injection applications.

Screw seals ND13 are made of PP and have a 13-425 thread. They have a 8.5 mm centre hole or are closed. Screw seals are supplied with fitted septa made of a variety of materials or without any septa.

These septa are temperature-resistant from -40 °C to 120 °C and have excellent chemical properties.

The shell vials made of clear or amber first hydrolytic class glass come in a set with transparent PE plugs. The star-shaped diaphragm in the plug facilitates easy penetration.

Shell vials made of plastic are a shatter-proof alternative to glass vials. They also come with a PE plug.

This easy-to-use, inexpensive vial/plug combination is suitable for non-critical analyses, especially in the field of HPLC.

Screw seals ND13 are made of PP and have a 13-425 thread. They have a 8.5 mm centre hole or are closed. Screw seals are supplied with fitted septa made of a variety of materials or without any septa.

These septa are temperature-resistant from -40 °C to 120 °C and ideal for multiple injections thanks to their excellent resealability properties.

Screw seals ND13 are made of PP and have a 13-425 thread. They have a 8.5 mm centre hole or are closed. Screw seals are supplied with fitted septa made of a variety of materials or without any septa.

Suitable septa with a diameter of 12 mm made of different materials are available on request.

Screw neck vials ND10 with 10-425 thread facilitate easy filling with viscous substances thanks to their wide opening. The vials are available in clear and amber first hydrolytic class glass.

The short thread vials ND9 SureStop are available in clear and amber first hydrolytic class glass and are the best available on the market in terms of seal tightness and reliability. The vials have an additional stopper ring at the end of the thread which clearly marks the end point in the screwing-in process. This ensures that the tightness of the seal is independent of the touch or feel of the user screwing the stopper in. This ensures the lowest possible number of standard deviations and high reproducibility of analysis results.

Screw seals ND10 are made of PP and have a 10-425 thread. They have a 7 mm centre hole or are closed. Screw seals are supplied with fitted septa made of a variety of materials or without any septa.

These septa are temperature-resistant from -60 °C to 200 °C and have better purity than septa made of natural rubber, butyl or red rubber. However, they have less effective resealability properties and are therefore more suitable for single-injection applications.

Septa with a double-sided PTFE coating show a very low particle formation during penetration.

Screw seals ND8 are made of PP and are supplied without or with fitted septa made of a variety of materials. They have a 8-425 thread, a 5.5 mm centre hole or are closed.

These septa are temperature-resistant from -40 °C to 120 °C and ideal for multiple injections thanks to their excellent resealability properties.

Crimp and headspace seals ND20 are made of aluminium and are supplied with fitted septa made of a variety of materials. There are the following different types of caps available:

Plain caps with a 10 mm center hole. These caps are suitable for standard applications. They are available in several colours on request.

Clear lacquered caps, so called headspace caps, with a special score line that breaks when the internal pressure reaches 3.0 ± 0.5 bar. The excess pressure is then released, and the risk of the vial exploding can be avoided.

Clear lacquered centre tear-off caps and complete tear-off caps. These caps are available in several colours on request.

Gold lacquered, magnetic crimp caps with 5 mm centre hole to be used with CE HS500/HS800, CTC 500, as well as Fisons HS500 / HS800 instruments.

Gold lacquered, magnetic crimp caps with 8 mm centre hole to be used with CTC Combi PAL instruments.

Red lacquered, magnetic bimetal crimp caps with 8 mm centre hole to be used with CTC Combi PAL instruments.

These grey septa are temperature-resistant from -40 °C to 120 °C and have excellent chemical properties. They are 3.0 mm thick and have a hardness of 50° shore A.

Also on Pharma-Fix seals, it is only the butyl areas that can come into contact with the sample, and these are PTFE coated. The areas that abut the edges of the glass are not coated. This ensures a particularly good seal.

The screw cap 7.622 166 for bottle 7.622 167 has to be ordered separately.

Screw seals ND8 are made of PP and are supplied without or with fitted septa made of a variety of materials. They have a 8-425 thread, a 5.5 mm centre hole or are closed.

Suitable septa with a diameter of 8 mm made of different materials are available on request.

Crimp seals ND11 are made of aluminium. They are clear or lacquered in different colours and have a 5.5 mm hole. They are supplied with fitted septa made of a variety of materials.

These septa are temperature-resistant from -40 °C to 120 °C and have excellent chemical properties.

Septa with a double-sided PTFE coating show a very low particle formation during penetration.

Screw seals ND15 are made of PP and are supplied without or with fitted septa made of a variety of materials. They have a 15-425 thread, a 9 mm centre hole or are closed.

Screw seals ND18 are made of PP and are supplied with or without fitted septa made of a variety of materials. They have a 18-400 thread, a 12 mm centre hole or are closed.

ND15 seals are suitable for items 7.616 898, 7.618 935, 7.616 655 and 7.618 936.
ND18 seals are suitable for items 7.616 899 and 7.616 139.

These ND18 screw caps with 18-400 thread are not compatible with ND18 precision thread vials !

These septa are temperature-resistant from -40 °C to 120 °C and have excellent chemical properties.

Short thread screw seals ND9 are made of PP and are supplied with fitted septa made of a variety of materials. The caps have a 6 mm centre hole and are available in different colours. The screw caps are similar in shape to the crimp caps and are therefore also suitable for robotic handling.

In this case, caps and septa form an inseparable unit (Ultrabond), which means that even a blunt needle is unable to push the septa into the vial.

These septa are temperature-resistant from -60 °C to 200 °C and have better purity than septa made of red rubber. However, they have less effective resealability properties and are therefore more suitable for single-injection applications.

Snap ring vials and micro-vials ND11 with wide opening made of natural or amber PMP or PP are a shatterproof alternative to glass vials.

The blue Push-On caps made of PE have a thinned penetration point, but no additional septum. They are an inexpensive alternative to crimp caps for non-critical applications.

Screw seals ND8 are made of PP and are supplied without or with fitted septa made of a variety of materials. They have a 8-425 thread, a 5.5 mm centre hole or are closed.

These septa are temperature-resistant from -40 °C to 120 °C and have excellent chemical properties with regard to cleanliness.

These kits correspond to the standard ND9 kits with regard to their setup (shrink-wrapped short thread vials ND9 made of clear or amber first hydrolytic class glass with corresponding short thread screw caps made of PP). But there is a batch-specific test certificate with HPLC and GC chromatographs for every kit available on request. Certified kits are delivered completely shrink-wrapped. This means additional safety for the end user.

Each batch of HPLC and GC certified kits is tested on 15 critical parameters. In a method corresponding as far as possible to real laboratory conditions, an HPLC/UV and GC/MS test of a vial and seal combination will be carried out.

Kits containing Ultrabond seals are especially for the use with Waters autosamplers.