Deep-well plader

The LABSOLUTE® Deep well Plates meet all the important requirements for a wide variety of applications in cell culture, pharmacy and molecular biology. In addition to the long-term storage of samples, the deep well plates are suitable for a variety of other applications such as cultivation of microorganisms, screening tests and extraction of nucleic acids and proteins.

• The plates are made of 100 % pure polymer without additives
• Manufactured in a class 8 clean room
• Free of RNase, DNase, human DNA, endotoxins, PCR inhibitors and ATP
• Due to the precise production according to ANSI/SLAS 2004 standard, the plates are ideally suited for use with robots and automated liquid handling systems.
• The plates made of PP offer high chemical resistance (e.g. to DMSO) and are autoclavable at 121 °C.

Accessories Sealing mats for deep well plates Accessories PCR adhesive foils

The LABSOLUTE® sealing mats for deep well plates protect the samples against contamination and evaporation. The alphanumeric grid allows easy sample identification.

Accessories Deep well plates, PP and PS

• 384 square wells
• Pyramidal well bottom for optimal sample retrieval
• Raised rims for optimal sealing and reduced risk of cross-contamination
• Raised rims on the corners to protect edges of seals
• Chemical resistant (e.g. against DMSO, Phenol, Chloroform)
• Autoclavable (121 °C)
• Virgin polypropylene
• Certified RNase, DNase and endotoxin free
• Produced in a cleanroom environment

Alternative

Suitable for test preparation and for storage and transport of samples.

• Clear
• Produced under clean room conditions
• Compatible with automated systems
• RNase und DNase free

Developed for a range of uses, e.g. High-Throughput Screening (HTS), general analysis which requires a master reservoir plate, cell and tissue culture, sample storage, etc. Deep well plates can be used with all leading robotic systems and other autosampling devices.

• 96 well: 12 x 8 array, 384 well: 24 x 16 array
• High chemically-resistant polypropylene (e.g.: against DMSO, phenol, chloroform)
• ANSI/SLAS format
• Alphanumeric well coding
• Plates suitable for freezing down to -80°C (PP) or -20°C (PS)
• One notched corner ensures correct orientation.
• Stackable
• DNA-, RNase-, DNAse -free

Accessories Sealing mats

The 0,5 ml and 2 ml MASTERBLOCK® are ideal microplates for storing non-human sample material but are also ideal for cultivating bacteria or yeast. Their most important properties are biological inertness, resistance to numerous solvents commonly used in the laboratory, such as DMSO and temperature resistance from -196 °C to +121 °C.

Properties:

• Uniform external dimensions and tolerances
• Alphanumeric well coding
• Sealable with adhesive films and heat sealer
• Sealable with CapMats
• Available sterile or non-sterile
• Barcode-labelled on request

384 Well Polystyrene Microplates are manufactured under DIN ISO 9001 guidelines and can be traced all the way back to production through a defined LOT number system. Furthermore they are footprint compatible with automated systems. Polypropylene (PP) has low biomolecular binding characteristics, a high temperature tolerance, and is resistant to many standard laboratory chemicals, such as DMSO. From black polypropylene microplates for fluorescence polarisation to white microplates for scintillation proximity assays (SPA), the 96 well polypropylene range has all you need. The improved Rounded Square Well Design allows flexible working volume of 15 - 110 μl, with the advantages of a round well, such as reduced wicking and bubbling.

Properties:

• Total volume: 131 μl
• Working volume: 15 - 110 μl
• Growth area: 10 mm2
• Lid enables gas exchange with the lowest possible evaporation
• Stackable
• Alphanumeric well coding

384 Well Polystyrene Microplates are manufactured under DIN ISO 9001 guidelines and can be traced all the way back to production through a defined LOT number system. Furthermore they are footprint compatible with automated systems. Polystyrene is a highly clear polymer with excellent optical properties which makes it ideal for precise optical measurements. An it is suitable for work with cell cultures. The improved Rounded Square Well Design allows flexible working volume of 15 - 110 μl, with the advantages of a round well, such as reduced wicking and bubbling.

Properties:

• Total volume: 131 μl
• Working volume: 15 - 110 μl
• Growth area: 10 mm2
• Lid enables gas exchange with the lowest possible evaporation
• Stackable
• Alphanumeric well coding

Each of the 96 reservoirs contains an elevated platform with either one or three crystallisation wells. The plates are optimised for sealing with VIEWseal™ and AMPLIseal™ adhesive film. All CrystalQuick™ plates are available in an LBR version for the use of polarised light.

Properties:

• Alphanumeric well coding
• Suitable for automated applications
• Crystallisation plates for sitting drop applications with different well profiles and material properties

96 Well Polystyrene Microplates are manufactured under DIN ISO 9001 guidelines and can be traced all the way back to production through a defined LOT number system. Furthermore they are footprint compatible with automated systems. Polystyrene is a highly clear polymer with excellent optical properties which makes it ideal for precise optical measurements. An it is suitable for work with cell cultures.

Properties:

• Reduction of sample volume by up to 50 %
• Standardised pathlength (1 cm=170 μl, 0.5 cm=80 μl)
• medium binding microplate is more hydrophobic than the surface of a high binding microplate
• μClear® with ultra-thin films, without the use of adhesives or solvents
• Are analysed for detectable DNase, RNase and human DNA
• Are free of biocides and antistatics
• Are manufactured without the use of siliconbased mould release

The 1 ml MASTERBLOCK® are ideal microplates for storing non-human sample material but are also ideal for cultivating bacteria or yeast. Their most important properties are biological inertness, resistance to numerous solvents commonly used in the laboratory, such as DMSO and temperature resistance from -196 °C to +121 °C.

Properties:

• Uniform external dimensions and tolerances
• Alphanumeric well coding
• Sealable with adhesive films and heat sealer
• Sealable with CapMats
• Available sterile or non-sterile
• Barcode-labelled on request

The use of the 96 well format allows the scale up of basic PCR work, while the 384 well format is ideal for high-throughput screening projects.

Properties:

• Ultra thin polypropylene for optimal heat transfer from the thermoblock to the reaction solution
• Free of detectable DNase, RNase, human DNA
• Non-Pyrogenic
• Sealable with sealers SILVERseal™ , VIEWseal™ and AMPLIseal™ or with compatible 8-cap strips
• For Research Use Only, not for use in diagnostic procedures, unless otherwise indicated

96 Well Polystyrene Microplates are manufactured under DIN ISO 9001 guidelines and can be traced all the way back to production through a defined LOT number system. Furthermore they are footprint compatible with automated systems. Polypropylene (PP) has low biomolecular binding characteristics, a high temperature tolerance, and is resistant to many standard laboratory chemicals, such as DMSO. From black polypropylene microplates for fluorescence polarisation to white microplates for scintillation proximity assays (SPA), the 96 well polypropylene range has all you need.

Properties:

• Uniform external dimensions
• Well-to-well spacing 9 mm
• Alphanumeric well coding
• High chemical resistance
• High temperature resistance (-196 °C to +121 °C)
• Sealable with adhesive films and heat sealer
• Sealable with CapMats

Minimize plate evaporation through the uniquely engineered design of Thermo Scientific™ Nunc™ Edge-96 Well Plate. The edge plate is engineered for optical superiority allowing your automated imaging systems to operate efficiently. The plates are made of clear polystyrene for excellent optical properties making it ideal for optical measurements
Features:

• Reduced Edge Effect virtually eliminates evaporation in lengthy incubations
• Overall plate evaporation rate reduced to <2% after seven days of incubation
• Low evaporation permits full-plate results
• Large evaporative buffer zones eliminate well-to-well variability
• Perimeter moat can be filled with 1.7mL sterile H2O or media
• Low background fluorescence, ideal for optical instruments
• Ideal for image-based high content applications like measuring primary neuron cultures
• Customized bar coding available (upon request)

The Matrix™ SepraSeal sealing mats are suitable for securely sealing sample tubes with or without 2D code. For sample access, the caps can be removed with the practical cap removal tool (Cat.-No. 6.254 390, please order seperately) or pierced once. The pre-slit versions are suitable for multiple piercing. The self-sealing function of the pre-slitted elastomer maintains sample integrity.

• For storage down to -20 °C
• Individual closure or closure of 96 sample tubes simultaneously possible
• Good chemical resistance
• Low evaporation rate

With the Matrix™ DuraSeal sealing mat (Cat.-No. 4.658 312), sample tubes are permanently sealed. The sealing mat is pre-slit for sample access and has a v-shaped design. The special elastomer ensures that the integrity of the sample is maintained. Suitable for sample storage down to -80 °C.