Centrifugation Tubes

Suitable for use in microbiological, histological, clinical, industrial and environmental laboratories. Various types of optional heating blocks are available as accessories for the LLG-uniBLOCKTHERM.

• Digital control with LED display
• Can be used up to 120 °C
• For timer and continuous operation
• Can be used with different heating blocks
• 1 x block unit
• With overheating protection

For use with Immersion circulator LX and MX.

Drain syphon SY1: For the rapid draining of baths.

Heat exchange coil CW5: For use with precision and general purpose stirred baths. Temperature range 2 °C above coolant temperature. Coil diameter/l mm 77/55, pipe bore inlet/outlet 7mm.

PP spheres PS20: Between operating temperatures 60 °C and 100 °C and below room temperature a lid or layers of polypropylene spheres can be used. Above 100 °C a lid must be used.

Stainless steel bridge for the new CORIO™ series.

CORIO™ CD Heating Circulators for internal and external temperature applications with stainless steel baths for working temperatures from 20 °C to 150 °C. CORIO™ Heating Circulators feature professional technology for demanding applications. These units facilitate internal temperature control in the bath tank or control of externally connected applications.

• For internal and external applications
• Bright, white, easy to read display
• Very quiet
• Pump change-over between internal and external circulation
• USB connection
• High-quality bath tanks made of stainless steel with bath lid and drain tap
• Integrated cooling coil for counter-cooling

Combinations of immersion circulators and insulated refrigeration baths are low-cost solutions for direct thermoregulation within the temperature range -20/-30°C to +200°C. The refrigeration baths operate with natural refrigerants. A pump adapter (optional) can be fitted for thermoregulation of externally closed applications. Models with the Pilot ONE controller have a variable speed pressure/suction pump and are therefore suitable for external open thermoregulation applications. The temperature stability is 0.02K for the Compatible Control models and 0.05K for the KISS models.

The device is available in single, dual, and four block configurations and provide a broad temperature range up to 150 °C, which makes them useful for a variety of applications in molecular biology, histology, clinical, environmental, and industrial laboratories.

• Single, dual and four block capacity
• Dual display
• USB connectivity enables traceability of data
• Molded block chamber

Designed for applications that require repeatable results and superior temperature stability. These multi-purpose units are ideal for incubation and activation of cultures, enzyme reactions, immunoassays, melting/boiling points, and a wide variety of other laboratory procedures. Integral support rod holder with locking knob accepts optional External Temperature Probe Kit. Optional External Temperature Probe Kit monitors actual block or sample temperature. Each of the models accept separate interchangeable modular blocks, accommodating various tube sizes from 0.2 ml microtubes to 50 ml centrifuge tubes. Each block has a thermometer well for measuring block temperature. Efficient heating due to close tube-and-block contact for maximum heat retention.

• Microprocessor Control
• LED Display
• Temperature Calibration Mode
• Caution Hot Indicator
• Audible Alarm

For internal and external applications. The thermoregulators with maximum flexibility can be mounted with the sturdy bath clamp to any bath up to 50 liters. Equipped with USB interface, also available with optional analogue (extra code A) or RS232 (extra code D) interface.

• Easy switching between internal and external circulation (optional pump set, Cat. No. 4.658 027)
• Large colour TFT Display
• Easy to operate via central controller
• Integrated programmer for 8 x 60 program steps
• Class III (FL) acc. to DIN 12876-1
• Continuously adjustable, powerful pressure pump
• External Pt100 sensor connection
• Installation cooling coil for counter-cooling, Cat No. 4.658 026, available separately

E-grade - innovative activation keys for the functionality to suit your budget and process requirements

Every application requires particular functions. If the circulator is to be used in a range of applications it will generally require greater functionality. The required functionality grows with the complexity of the application. The innovative "E-grade" has the answer. Models with the Pilot ONE Controller have a comprehensive range of functions suited to the classical temperature control applications. The E-grade allows the functionality to be extended at any time to suit new process requirements and budget. E-grade stands for electronic upgrade and it is simple to do: To extend the functionality a unit specific code is entered via the controller. This code is specific to the serial number of the unit and is either already entered at the factory for new units or it can be activated at a later date. The code is sent by email. There is no requirement for a hardware or software update.

The E-grade "Explore" for Unistats is more than just another functions package. It makes important information available to users of Unistat temperature control systems. Temperature values and temperature differentials as well as for the actual heating power, cooling power and pump power within the system are displayed on the touch-panel. E-grade "Explore" is an evolution of the existing Unistat technology. Existing sensors are utilised to make important process temperature and power data visible. In addition to making the data visible on the display of the device, it can also be accessed via the digital interfaces for further processing.

Application examples for E-grade^® "Explore":

• Process and product development and optimisation
• Use-Tests of raw materials, quality control
• Enhanced data collection for scale-up trials

For precise temperature control of internal and external applications from 3 to 26 litres.

• Simple control of complex applications
• Infinitely adjustable, extremely powerful pressure and suction pump
• Large, high-resolution TFT touch display with multilingual user interface
• Medium-contacting parts made of stainless steel
• Integrated programmer
• External Pt100 connection
• USB interface
• RS232 interface
• Ethernet interface
• Analogue interfaces (optionally)
• Classification III according to DIN 12876-1
• High quality thermal insulation of the bath tanks
• Integrated drain cock for easy and safe emptying

Heating bath circulators are suitable for temperatures up to 200 °C or 300 °C depending on model. The Compatible Control models have a continuously variable pressure and suction pump. The pump pressure can be controlled with an optional pressure sensor, and so can protect your valuable glass-ware from breakage. The machines are preferred and used for temperature control of externally connected applications. Additionally there is the ability to control the temperature of objects placed directly in the open bath.

CORIO™ C Open Heating Bath Circulators for internal temperature applications with stainless steel bath tanks for working temperatures from 20 °C to 100 °C, complete set with bath tanks.

• For internal applications
• Bright, white, easy to read display
• Whisper quiet
• Integrated drain screw (except for B5)

CORIO™ C Open Heating Bath Circulators for internal temperature applications with transparent bath tanks for working temperatures from 20 °C to 100 °C.

• For internal applications
• Bright, white, easy to read display
• Whisper quiet