Centrifugation Tubes

Microprocessor controlled universal drying oven with forced convection including two shelves. Each shelf of the uniOVEN 42 and uniOVEN 110 has a load capacity of 20 kg, the total load capacity of each unit is 50 kg. The maximum number of shelves is 7 for uniOVEN 42 and 10 for uniOVEN 110 with a distance of 40 mm between shelves.

• Quick and intuitive operation
• Microprocessor control with integrated auto-diagnostic system
• Forced convection with fan
• Digital display for time and temperature
• Timer: 1 minute to 99.9 h and continuous
• Delayed start timer: 1 minute to 99.9 h
• Outlet for vapour exhaustion
• Acoustical and visible information for end of program
• Acoustical and optical alarm at temperature differences
• Interior made of stainless steel
• Adjustable over temperature protection at 300 °C

Scope of supply: LLG-uniOVEN incl. 2 shelves

Specifications	LLG-uniOVEN 42 // LLG-uniOVEN 110
Internal volume:	42 l // 110 l
Temperature range:	50 ... 250 °C
Temperature accuracy: Temperature uniformity:	±1 °C (at 70 °C) ±2 °C (at 70 °C)
Permissible ambient temperature:	5 ... 40 °C
Permissible relative moisture:	80 %, not condensing
Dimensions (W x D x H):	420 x 280 x 360 mm // 500 x 445 x 500 mm
Weight:	39 kg // 66 kg
Power supply:	230 V, 50/60 Hz
Warranty:	3 years

Accessories Accessories for Universal drying ovens LLG-uniOVEN 42 / 110

Accessories Universal drying oven LLG-uniOVEN 42 and LLG-uniOVEN 110

Powerful drying cabinets with rapid heating and exact temperature regulation guarantees reproducible results. Thanks to its high quality insulation, the device has a very large interior of 125L in relation to its total volume. This structure also reduces odour emissions, operating costs, and ensures excellent temperature uniformity.

• Oven basic dry with natural convection up to 250 °C
• Oven control dry with recirculating air up to 300 °C
• Electronically adjustable ventilation
• Clear LED display and control menu
• Key lock function
• Timer from 1 minute up to 100 days
• Adjustable temperature limit
• USB Interface
• For up to 6 shelves
• Interior made of stainless steel
• Also available with glass door
• Door opening possible up to max. 180°

Additional features Oven 125 control dry:

• Recirculating air drying cabinet with automatic fan switch-off
• Recirculating air adjustable in 10 steps
• Real-time clock
• Temperature selection limited TWB (DIN 12880)
• Illuminated interior
• Cable bushing at the rear for measurings inside the oven
• RS 232 Interface
• Direct saving of data on USB stick
• Interface for additional temperature sensor (display and control possible)
• 2 large TFT Displays

Scope of supply: Oven with 2 shelves and calibration certificate at 160 °C.

Specifications	basic dry // control dry
Internal volume:	125 l
Ambient temperature:	5 ... 40 °C
Working temperature:	RT+ 5 ... 250 °C // RT+ 5 ... 300 °C
Adjustment and display resolution:	0.1 K
Temperature stability (150 °C):	±0.3 K
Ambient humidity: Heating power:	80 % 2400 W
Outer Dimensions (W x D x H): Inner Dimensions (W x D x H):	700 x 650 x 825 mm 550 x 525 x 450 mm
Weigth:	55 kg // 82 kg
Power supply:	230 V, 50/60 Hz
Protection class:	IP 20

Accessories Wire mesh shelves

The all-round genius among heating ovens covers a multitude of applications, ideally at temperatures above +50 °C. The fresh air is preheated in the pre-heating chamber to avoid temperature fluctuations.
TwinDISPLAY: ControlCOCKPIT with two colour displays
You can find a detailed description of the "TwinDISPLAY" model at www.memmert.com

Specifications Type designation:	N = Natural convection F = Forced air circulation plus = TwinDISPLAY
Working temperature range:	at least 5 °C (UN/UNplus) or 10°C (UF/UFplus) above ambient to +300 °C
Setting temperature range:	+20 to +300 °C
Setting accuracy:	up to 99,9°C: 0.1°C / from 100 °C: 0,5 °C

Accessories Glass door for Universal ovens Accessories Special equipment for Universal ovens and Incubators

Constant climate chambers for long-term tests and accelerated stability tests of pharmaceutical products according to the ICH guideline Q1A. With corrosion and condensate-free stainless steel interior for homogeneous temperature and humidity conditions.

• Electronically controlled APT.line™ preheating chamber with cooling system
• Inner chamber made completely of stainless steel
• 2 stainless steel racks incl. shelf support
• Intuitive touchscreen controller with time segment and real-time programming with internal measured value recording
• Humidity control with capacitive humidity sensor and vapor humidification
• Independent temperature safety device class 3.1 (DIN 12880) with optical and audible alarm
• Access port with silicone plug diam. 30mm, left side
• LCD display for indication of temperature, humidity, alarms and additional information
• Internal data logger with USB interface
• Independent water supply via canisters
• Models from 240 l capacity with double swivel castors and brake

Specifications
Humidity range:	20 ... 80 % r.F.
Humidity accuracy:	2.0 %
Temperature range:	0 ... 70 °C
Temperature accuracy:	±0.1 °C
Computer interface:	Ethernet
Power supply:	200 ... 230 V, 50/60 Hz

Accessories  Accessories  Accessories  Accessories  Alternative Constant climate chambers, KBF / KMF series Alternative

For long-term stable temperature/humidity simulations in one chamber. The constant climate chambers are ideal for norm-compliant work according to ICH guidelines and work independently of the water supply.

KBF Series: Constant climate chambers with large temperature range: 0 °C to 70 °C and humidity range: 10 % RH to 80 % RH.
KMF Series: Ideal for demanding stress tests, e.g. at 85 °C and 85 % RH. Temperature range: -10 °C to 100 °C and humidity range 10 % RH to 98 % RH.

Equipment:

• Electronically controlled APT.line™ preheating chamber with cooling system
• Inner chamber made of stainless steel
• Intuitive touchscreen controller with time-segment and real-time programming with internal data recording
• Humidity regulation with capacitive humidity sensor and vapor humidification
• Inner glass door with seal
• Independent temperature safety device class 3.1 (DIN 12880) with optical and audible temperature alarm
• Avoidance of glass corrosion by special TIMELESS coating
• Access port with silicone plug diam. 30mm, left side
• Door heating
• Ethernet interface for communication software APT-COM™ DataControlSystem
• Internal data logger, measured values can be read out in open format via USB
• Power supply 200 ... 230 V, 50/60 Hz

Accessories  Accessories  Accessories  Alternative Constant climate chambers series KBF-S Solid.Line Alternative

Drying and heating chambers are suitable for routine drying and sterilisation tasks with homogeneous temperature distribution.

• High temperature accuracy thanks to APT.line™ technology
• Electromechanical control of the exhaust air flap
• Chambers up to 115 l are stackable
• Ergonomic handle design
• USB connection for data recording
• Class 2 integrated independent adjustable temperature safety device (DIN 12880) with visual alarm

-With forced convection

• Controller with LCD display and enhanced timer functions
• Adjustable fan speed
• Ethernet interface

Temperature range
ED 56:	ambient temperature plus 15 °C to 300 °C
ED 115, 260:	ambient temperature plus 8 °C to 300 °C
FD 56, 115, 260:	ambient temperature plus 10 °C to 300 °C
FED 56, 115, 260:	ambient temperature plus 10 °C to 300 °C

Accessories Racks for BINDER chambers and incubators, chrome-plated Accessories  Accessories  Accessories  Alternative Drying and heating chambers FED Classic.Line Alternative  Alternative

Drying and heating chambers are suitable for routine drying and sterilisation tasks with homogeneous temperature distribution.

• Uniform drying conditions thanks to APT.line™ preheating chamber technology
• Identical test conditions throughout the chamber interior independent of sample size and quantity
• Adjustable exhaust air flap
• Class 2 independent adjustable temperature safety device (DIN 12880) with visual alarm

-With forced convection

• Controller with expanded timer functions
• Adjustable fan speed
• RS 422 interface

Accessories Racks for BINDER chambers and incubators, chrome-plated Accessories  Accessories  Accessories  Alternative  Alternative  Alternative Drying and heating chambers FED Avantgarde.Line

Robust, space-saving, low-profile ovens with mechanical and adjustable chamber ventilation.

• Temperature range: 60 to 230 °C
• Hydraulic thermostat temperature control
• Adjustable exhaust air flap
• Timer 0 to 120 min
• Power supply 230 V, 50/60 Hz

The number of shelves included in the scope of supply is listed in the table.

Accessories  Accessories Racks for BINDER chambers and incubators, chrome-plated

Full-sight glass door (4-layer insulating glass) temperature-range up to max. 250°C, for UN, UNplus, UF, UFplus series.

The series provide bench-top models with 60, 100 or 180 l as well as floor models with 400 or 750 l chamber volume and 3 different fittings, each optionally with gravity or mechanical convection.

• Very high energy efficiency, environmentally friendly materials (reduced use of formaldehyde), reduced heat emission
• Programmable timer
• Small footprint
• Flexible shelf system doubles the number of shelves and therefore the footprint
• Very good spatial and temporal temperature stability
• Automatic visual and acoustic over-temperature alarm
• Very low temperatures at outer wall
• Easy to read vacuum fluorescent display
• Intuitive user interface for setting temperature
• Easy cleaning due to edgeless fabrication

Heratherm™ General Protocol:
Perfect for routine daily work from 10 to 250 °C. Chambers made from corrosion-resistant st. steel with rounded corners. Timer, mechanical exhaust vent as well as 2 shelves are incl. as standard.
Heratherm™ Advanced Protocol:
For a greater flexibility and accuracy of temperature values. With V2A st. steel interior, works up to 330 °C at highly stable temperatures. Digital timer for daily or weekly On / OFF cycles. Up to 10 cycles can be stored and combined as ramps. Fan speed and air valve can be integrated into ramp programming. Selectable quick start function allows for extremely fast heating.
Heratherm™ Advanced Protocol Security:
Additional to equipment of the Advanced Protocol series: under-temperature alarm for improved sample protection. With door lock and door alarm to prevent disruption and allow for safe cultures for a long time. Optional auto-dry function deactivates oven when the samples are dry. The V2A inner chamber can be supplemented by a st. steel outer housing for pharmaceutical and clinical applications.

Specifications
Power supply: 230 V, 60 Hz
Temperature range: 10 to 250 °C (General Protocol / Advanced Protocol floor models)
10 to 330 °C (Advanced Protocol benchtop models / Advanced Protocol Security)
As well as incorporating all the benefits of Thermo Scientific™ Heratherm™ General Protocol ovens, the Heratherm™ Advanced Protocol range boasts additional features providing even more flexibility, accuracy and dependability.

• Sophisticated timer extends the automation options available to the user: turn on or off after a pre-set time, choose between a recurring weekly timer or run oven based on the 24 hour clock
• Highest level of temperature uniformity
• Exceptionally low energy consumption - 60 litre models just need 170 W (gravity convection) and 275 W (mechanical convection) per hour to maintain 150 °C
• Adjustable fan speed for application related airflow
• Programmable controller for temperature ramps and dwells (store up to 10 programs with 10 discrete steps, features electronically controlled fan speed and damper position)
• Access port allows the introduction of sensors for independent data monitoring
• A simple calibration routine ensures temperature accuracy over time
• Boost function enables rapid heating up - no need to run the oven 24/7 (tabletop models only)
• Optional stainless steel exterior (type designation SS)

The number of shelves included in the scope of delivery is listed in the table.

Specifications Type designation:	OGH = Natural convection OMH = Forced air circulation
Temperature range:	10 to 330 °C
Power supply:	230 V / 50 Hz

Accessories Wire mesh shelves for Ovens Heratherm™ Accessories  Accessories  Accessories  Accessories

The series provide bench-top models with 60, 100 or 180 l as well as floor models with 400 or 750 l chamber volume and 3 different fittings, each optionally with gravity or mechanical convection.

• Very high energy efficiency, environmentally friendly materials (reduced use of formaldehyde), reduced heat emission
• Programmable timer
• Small footprint
• Flexible shelf system doubles the number of shelves and therefore the footprint
• Very good spatial and temporal temperature stability
• Automatic visual and acoustic over-temperature alarm
• Very low temperatures at outer wall
• Easy to read vacuum fluorescent display
• Intuitive user interface for setting temperature
• Easy cleaning due to edgeless fabrication

Heratherm™ General Protocol:
Perfect for routine daily work from 10 to 250 °C. Chambers made from corrosion-resistant st. steel with rounded corners. Timer, mechanical exhaust vent as well as 2 shelves are incl. as standard.
Heratherm™ Advanced Protocol:
For a greater flexibility and accuracy of temperature values. With V2A st. steel interior, works up to 330 °C at highly stable temperatures. Digital timer for daily or weekly On / OFF cycles. Up to 10 cycles can be stored and combined as ramps. Fan speed and air valve can be integrated into ramp programming. Selectable quick start function allows for extremely fast heating.
Heratherm™ Advanced Protocol Security:
Additional to equipment of the Advanced Protocol series: under-temperature alarm for improved sample protection. With door lock and door alarm to prevent disruption and allow for safe cultures for a long time. Optional auto-dry function deactivates oven when the samples are dry. The V2A inner chamber can be supplemented by a st. steel outer housing for pharmaceutical and clinical applications.

Specifications
Power supply: 230 V, 60 Hz
Temperature range: 10 to 250 °C (General Protocol / Advanced Protocol floor models)
10 to 330 °C (Advanced Protocol benchtop models / Advanced Protocol Security)
The Thermo Scientific™ Heratherm™ Advanced Protocol Security portfolio combines the benefits of the Advanced Protocol line with an extra layer of security for applications where process reliability and sample protection are paramount.

Additional security features provide peace of mind for precious samples:

• Auto-dry function deactivates oven when the samples are dry, saving energy (optional sample temperature sensor is required to utilize this feature)
• Standard overtemperature alarm and an additional undertemperature alarm
• Door lock prevents disruption, tampering or accidental opening
• Door alarm notifies the operator when door is left open accidentally
• Socket for independent sample sensor (option): When connected, exact sample temperature is shown on display for additional peace of mind
• Housing made of stainless steel (type designation SS)

The number of shelves included in the scope of delivery is listed in the table.

Specifications Type designation:	OGH = Natural convection, OGH = Forced air circulation
Temperature range:	10 to 330°C
Power supply:	230 V / 50 Hz

Accessories Wire mesh shelves for Ovens Heratherm™ Accessories  Accessories  Accessories  Accessories

The series provide bench-top models with 60, 100 or 180 l as well as floor models with 400 or 750 l chamber volume and 3 different fittings, each optionally with gravity or mechanical convection.

• Very high energy efficiency, environmentally friendly materials (reduced use of formaldehyde), reduced heat emission
• Programmable timer
• Small footprint
• Flexible shelf system doubles the number of shelves and therefore the footprint
• Very good spatial and temporal temperature stability
• Automatic visual and acoustic over-temperature alarm
• Very low temperatures at outer wall
• Easy to read vacuum fluorescent display
• Intuitive user interface for setting temperature
• Easy cleaning due to edgeless fabrication

Heratherm™ General Protocol:
Perfect for routine daily work from 10 to 250 °C. Chambers made from corrosion-resistant st. steel with rounded corners. Timer, mechanical exhaust vent as well as 2 shelves are incl. as standard.
Heratherm™ Advanced Protocol:
For a greater flexibility and accuracy of temperature values. With V2A st. steel interior, works up to 330 °C at highly stable temperatures. Digital timer for daily or weekly On / OFF cycles. Up to 10 cycles can be stored and combined as ramps. Fan speed and air valve can be integrated into ramp programming. Selectable quick start function allows for extremely fast heating.
Heratherm™ Advanced Protocol Security:
Additional to equipment of the Advanced Protocol series: under-temperature alarm for improved sample protection. With door lock and door alarm to prevent disruption and allow for safe cultures for a long time. Optional auto-dry function deactivates oven when the samples are dry. The V2A inner chamber can be supplemented by a st. steel outer housing for pharmaceutical and clinical applications.

Specifications
Power supply: 230 V, 60 Hz
Temperature range: 10 to 250 °C (General Protocol / Advanced Protocol floor models)
10 to 330 °C (Advanced Protocol benchtop models / Advanced Protocol Security)
Thermo Scientific™ Heratherm™ General Protocol ovens are perfect for routine daily work, providing the ideal heating and drying solution for your applications.

• Low energy consumption
• Built in timer
• Excellent footprint/volume ratio
• Tabletop models in 3 sizes (60L, 100L, 180L), floor models in 2 sizes (400L, 750L)
• Inner chambers made from corrosion-resistant stainless steel with rounded corners for easy cleaning
• Large, easy to view vacuum fluorescent display
• Simple, microprocessor-based touch button controls
• Doors can be opened over 180° making these units easy to access
• Automatic overtemperature alarm system to protect samples
• Gravity convection units (Type designation OGS) are designed to protect delicate samples while offering temperature uniformity of +/- 4 °C with temperature stability of +/- 0.4 °C at 150 °C
• Mechanical convection models (Type designation OM) provide a temperature uniformity of +/-3.3 °C with temperature stability of +/-0.3 °C at 150 °C
• The exhaust vent can be used as an access port for an external temperature sensor
• Lockable casters for easy mobility and stability (floor models only)
• All Heratherm™ ovens come standard with a RS232 data interface

The number of shelves included in the scope of delivery is listed in the table.

Accessories Wire mesh shelves for Ovens Heratherm™ Accessories  Accessories  Accessories  Accessories

The high-temperature tube furnaces are available in either horizontal (type RHTH) or vertical (type RHTV) designs. High-quality insulation materials made of vacuum-formed fibre plates enable energy-saving operation and a fast heating time due to low heat storage and heat conductivity. By using different gas supply systems, operations can be performed under a protective gas atmosphere, vacuum, or even with flammable gasses.

• Tmax 1600 °C, 1700 °C or 1800 °C
• MoSi2 heating elements, mounted vertically for easy replacement
• Insulation with vacuum-formed ceramic fibre plates
• Rectangular outer housing with slots for convection cooling
• Models RHTV with hinges for wall mounting
• Housing made of sheets of textured stainless steel
• Ceramic working tube made of material C 799 incl. fibre plugs operation under air
• Type B thermocouple
• Switchgear separate from furnace in separate floor standing cabinet
• Switchgear with control unit
• Possible controller variants are the programmable B 500, C 550 and P 570 (threes) with adjustable ramps and hold times.
• Over-temperature limit controller with manual reset for thermal protection class 2 in accordance with EN 60519-2 as temperature limiter to protect the oven and load
• Insulation only made of materials that are classified as not carcinogenic acc. to TRGS 905, class 1 or 2
• Standard power supply 400 V 3/N/PE 50/60 Hz

Dimensions without tube.

Option:

• Charge control with temperature measurement in the working tube and in the oven chamber behind the tube
• Alternative working tubes designed for process requirements
• Display of inner tube temperature with additional thermocouple
• Gas-tight flanges for protective gas and vacuum operation
• Manual or automatic gas supply system
• Three- or five-zone control for optimization of temperature uniformity
• Check valve at gas outlet avoids intrusion of false air

A safety drying oven from BINDER ensures the perfect test result of your solvent-based paints and coatings, absolute temperature precision even with high ventilation.

• Defined solvent quantity according to EN 1539
• Electronically controlled APT.line™ preheating chamber technology
• Temperature range: from 10 °C above ambient temperature to 300 °C
• Independent adjustable temperature safety device class 2 (DIN 12880), with visual temperature alarm
• RS 422 interface for use with APT-COM™ DataControlSystem communication software
• Power supply 230 V, 50/60 Hz

The number of shelves included in the scope of delivery is listed in the table.

Accessories  Accessories  Accessories Racks for BINDER chambers and incubators, chrome-plated

The all-round genius among heating ovens covers a multitude of applications, ideally at temperatures above +50 °C. The fresh air is preheated in the pre-heating chamber to avoid temperature fluctuations.
SingleDISPLAY: ControlCOCKPIT with one colour display
You can find a detailed description of the "SingleDISPLAY" model at www.memmert.com

Specifications Type designation:	N = Natural convection F = Forced air circulation plus = TwinDISPLAY
Working temperature range:	at least 5 °C (UN/UNplus) or 10°C (UF/UFplus) above ambient to +300 °C
Setting temperature range:	+20 to +300 °C
Setting accuracy:	up to 99,9°C: 0.1°C / from 100 °C: 0,5 °C

Accessories Glass door for Universal ovens Accessories Special equipment for Universal ovens and Incubators

Drying and heating chambers are suitable for drying and heat storage in research and quality assurance.

• Easy handling
• Accurate temperature control
• Simple and ergonomic door opening
• APT.line™ preheating chamber technology
• Adjustable exhaust air flap
• Controller with timer function
• Class 2 integrated independent adjustable temperature safety device (DIN 12880) with visual alarm

With natural convection for homogenous temperature distribution.

Specifications
Temperature range:	RT + 7 °C ... 250 °C
Temperature variation at 150 °C:	±3.4 °C
Heating-up time to 150 °C:	60 min
Permitted load:	45 kg
Weight:	36 kg
Power supply:	230 V, 50/60 Hz

Accessories  Alternative Drying and heating chambers FD-S Solid.Line Alternative  Alternative

Drying and heating chambers are suitable for drying and heat storage in research and quality assurance.

• Easy handling
• Accurate temperature control
• Simple and ergonomic door opening
• APT.line™ preheating chamber technology
• Adjustable exhaust air flap
• Controller with timer function
• Class 2 integrated independent adjustable temperature safety device (DIN 12880) with visual alarm

With forced convection for homogenous temperature distribution.

Specifications
Temperature range:	RT + 10 °C ... 250 °C
Temperature variation at 150 °C:	±2.6 °C
Heating-up time to 150 °C:	15 min
Permitted load:	45 kg
Weight:	36 kg
Power supply:	230 V, 50/60 Hz

Accessories  Alternative Drying and heating chambers ED-S Solid.Line Alternative  Alternative

Including 2 shelf supports.

• Battery-buffered ControlCOCKPIT - Uninterrupted supply for the entire display unit (ControlCOCKPIT) and therefore complete documentation of all parameters even when there is a power failure. The CO₂ parameter is continuously regulated

• Two gas connections with quick release connectors for automatic switch-over of gas cylinders

• Active microprocessor control for humidifying and dehumidifying (40 - 97 % rh), incl. digital indication and auto-diagnostic system ensures even more rapid reaching of set humidity and very short recovery times while avoiding condensate formation. Humidity supply with distilled water (from an external tank) by a self-priming pump; integral bacteria block by generating hotsteam, dehumidifying via sterile filter

• Control of oxygen concentration by N₂ inlet; adjustment range 1 % up to 20 % O₂;

• Peltier cooling unit, enables a working temperature of 37 °C even at higher ambient temperatures of up to 35 °C

• Further options and accessories, f. ex. special works calibration certificates, subframes, pressure reducing valves on request.

With their maximum working temperature of 300°C and forced air circulation, the TR series ovens achieve very good temperature uniformity. They can be used for various applications such as e.g. drying, sterilising or warm storing. The stainless steel interior chamber is easy to clean and resistant to rust.

• Tmax 300°C
• Operating range, room temperature +5 to 300°C
• Models TR 60 to TR 240 designed as tabletop models
• Models TR 420 and TR 1050 designed as floor standing models
• Horizontal, forced air circulation results in temperature uniformity better than ±5 °C
• Stainless steel chamber, alloy 304 (AISI)/(DIN material no. 1.4301), rust-resistant and easy to clean
• Large handle to open and close the door
• Charging in multiple layers possible using removeable trays (number of removeable trays included, see table below)
• Large, wide-opening swing door, hinged on the right with quick release for models TR 60 to TR 420
• Double swing door with quick release for TR 1050
• TR 1050 equipped with transport castors
• PID microprocessor control with self-diagnostic system
• Infinitely adjustable exhaust at the rear wall with operation from the front
• Available controller variants are the R 7 as basic variant with adjustable holding temperature or the programmable controllers B 510 (with touch panel, 5 programs with 4 segments each) and C 550 (with touch panel, 10 programs with 20 segments each)
• Solid state relays provide for low noise operation
• 220-240 V 1/N/PE 50/60 Hz connector as standard

Option:

• Over-temperature limit controller with manual reset for thermal protection class 2 in accordance with EN 60519-2 as temperature limiter to protect the furnace and load
• Infinitely adjustable fan speed of the air-circulation
• Window for observing charge
• Further removeable grids with rails
• Side inlet
• Stainless steel collecting pan to protect the furnace chamber
• Door hinges on the left side
• Reinforced bottom plate
• Safety technology according to EN 1539 for charges containing liquid solvents (TR .. LS) up to model TR 240 LS, achievable temperature uniformity ±8 °C
• Transport castors for model TR 450
• Upgrading available to meet the quality requirements of AMS 2750 E or FDA
• Process control and documentation via VCD software package for monitoring, documentation and control

The number of shelves included in the scope of delivery is listed in the table.

Safer than disinfection, hot-air sterilisation of containers and instruments.
The safety feature for this hot air steriliser: Setpoint Wait. This means that the programme for sterilisation only starts when the set temperature has been reached. This feature can also be used with freely positionable Pt100 temperature sensors. Here the sterilisation time only begins when the set temperature has been reached at all measurement points, and reliable sterilisation is guaranteed at all times.

Textured stainless steel housing, rear of zinc-plated steel, intuitively operated TwinDISPLAY(TFT colour display) with touchscreen
You can find a detailed description of the "TwinDISPLAY" model at www.memmert.com

• Available parameters on the ControlCOCKPIT: Temperature (Celsius or Fahrenheit), programme time, relative humidity, time zones, summertime/wintertime
• Two Pt100 sensors DIN class A in a 4-wire circuit for mutual monitoring, taking over functions in case of an error
• AtmoCONTROL software on a USB stick for programming, managing and transferring programmes via Ethernet interface or USB port
• ControlCOCKPIT with USB port for uploading programmes, reading out protocol logs, activating the User-ID function
• Displaying of already logged protocol data on the ControlCOCKPIT (max 10,000 values correspond to approx. 1 week)
• Ethernet interface on the rear of the appliance for reading out the protocol log and for uploading programmes and for online logging
• Multiple overtemperature protection: Electronic temperature monitoring TWW/TWB and mechanical temperature limiter TB acc. to DIN 12880, AutoSAFETY automatically adjusts to the set value within a freely adjustable tolerance range. Setting individual MIN / MAX values for over/undertemperature alarm