-
- General laboratory consumables
- Occupational safety, Security
- Analytical measurement and testing
- Stirring, Shaking, Mixing
- Sample preparation
- Distillation, separation, filtration
- Heating and cooling technology
- Liquid Handling
- Vacuum technology, Drying, Dry storage
- Optical instruments and microscopes
- Cleaning and sterilisation
- Environmental-, soil-, water-, food analysis
- Chromatography
- Cleanroom
Burners
Gas lighter, Piezo ignition
The white LABSOLUTE® gas lighter with aluminium shaft is characterized by simple and safe handling. It can be used not only to light gas burners in laboratories. The lighter stands out with an adjustable flame with Piezo ignition, a safety lock and a window to see the gas filling level easily. Due to the integrated eyelet, the LABSOLUTE® lighter can be stored quickly and is within reach at all times. The lighter is already filled and includes a protection cap....
Electric laboratory burner
Simple power supply through the electrical connector with an integrated switch for power on / off, no dangerous gas supply and gas leakage.
- Electrical power supply instead of gas
- Fast heat up without a flame
- Highest security operated through an RCD: suitable for education
- No waste and storage of gas cartridges
- Continuous power regulation through the optional power regulator
- Heat protection through the optional glass support: deposition for dishes and flasks
- Improved heat protection with an improved glass support
- Clean odorless working in regular atmosphere without a flame
Flame sterilizer / Blowlamp Soudogaz® X 2000 / X 2000 PZ
Air volume regulation for stepless adjustment of flame size. For operation with gas cartridge C 206 GLS
With durable housing to protect the cartridge.
- For flaming and sterilizing
- Mobile hand-held device
- One-hand operation possible
Safety Bunsen Burner, schuett phoenix II
For sterilising, heating, flame sterilising. For use in every microbiological laboratory or in safety cabinets. Modern Bunsen burner with state-of-the-art safety features plus outstanding quality characteristics:
- Controlled burning time 1 sec to 120 min (selectable)
- Automatic safety shut-off (selectable)
- Overheating protection / burner control by sensors
- Precise economic flame regulation (stable flame in strong air current)
- Flame and ignition monitoring
- "Push-and-Twist" bayonet fixture for burner head, no tools needed for cleaning
- Tilting right or left
Accessories for Infra-red burner, PowerCube IRB1
Power controller LR1 for continuous energy regulation between 0 to 100 %. Stand mounting device for fitting the Power Cube onto a retort stand. Stainless steel retort rod for attachment directly to the back of the casing, length approx. 13cm....
Electric Bunsen burner BA6101
Electrothermal"s Electric Bunsen, combines the advantages of a regular gas burner with the clean, easy operation of their Electromantles. The Electric Bunsen is ideal for non-contact heating of test tubes, crucibles, small flasks and beakers, regardless of their shape.
- Conical shaped heating element directs radiant heat to the top cavity
- Top cowl deflects heat away from your hand
- Air circulation from the vented housing keeps the base cool enough to hold during operation
- Corrosion-resistant
Flame sterilizer schuett easyflame
Mobile device for scarfing and flame-sterilising. With piezoelectric-ignition and gas supply control to create a soft or sharp flame. Infinite adjustment of the flame. Highest operational safety. In short-term use, the flame is activated as long as the push button is pressed. For continuous operation with lock key....
Infrared burner PowerCube IRB2
Laboratory heating device for the safe, rapid heating of large samples. Can be used anywhere, even where standard burners with an exposed flame cannot be used.
- Heats up quickly, constant heating
- No open flames, no soot, odourless
- Integral continuous electronic power adjustment between 0% and 100%
- Casing safe to touch even when hot
- Built-in casing handles for safe transport
- Inert ceramic, long-life heating element
- Built-in overheat monitor
- Protection of electrical components against spilled liquids
- Additional side safety shield on burner element
- Includes four-arm support for flat bottom containers. By using an accessory bracket the burner can be mounted on a tripod
Infrared burner, PowerCube IRB1
The PowerCube is suitable for all rapid, non-contact heating activities in laboratories, industry and education. Reagent bottles, flasks or dishes, depending on their size, can be placed directly on the support trivet over the heating element or attached to a stand mounting.
Advantages:...
Loop Sterilizer schuett solaris
Sterilisation with light. Sterilisation of inoculating loops, tweezers and small instruments within seconds.
- Sturdy and maintenance-free
- No gas, no open flame - Works with standard electrical power
- Intuitive, easy to use
- Instant, ready-to-use, no warm-up time, no waiting
- Sterilization temperature: 900 to 1300°C
- Touch-free START, with IR- sensor and adjustable timer (5 to 7 seconds)
- For use in Laminar Flow Cabinets
- Ideal for mobile operation in the field
Safety burner, Ms-Ni
Maximum temperature 1300°C, with needle valve, thermo safety element (bimetallic flame sensor with magnetic lock), air regulator and pilot light. Nickel-plated brass and steel. An anti-slip rubber coating under the base ensures absolute stability....
Bunsen burner with air regulation
Burners according to DIN 30665 cannot be switched off completely. A small flame remains burning even if needle valve or stop cock are turned off. The gas flow shall be disconnected by means of the central stop cock in the laboratory....
Accessories and Consumables for Barnstead™ Easypure™ RoDi
Customize your water purification system with the Thermo Scientific™ Barnstead™ Easypure™ RoDi Accessories and Consumables that best suit your application. Cartridge kit includes pre-filter, ultrapure mixed bed cartridge and Easypure high purity/low TOC cartridge....
Wick for spirit burner
PO number | Package size | Price per package | |||
---|---|---|---|---|---|
9018553 This product of our assortment corresponds with your search. |
1 piece | Login / Register here |
|
Socket for spirit burner
PO number | Package size | Price per package | |||
---|---|---|---|---|---|
9018554 This product of our assortment corresponds with your search. |
1 piece | Login / Register here |
|
Adapter for schuett phoenix II
PO number | Package size | Price per package | |||
---|---|---|---|---|---|
7930139 This product of our assortment corresponds with your search. |
1 piece | Login / Register here |
|
Adapter for gas cartridges CP 250 with integr.pressure reducer, DVGW-Safety- Gas tubing 0,5m and block valve
PO number | Package size | Price per package | |||
---|---|---|---|---|---|
9018750 This product of our assortment corresponds with your search. |
1 piece | Login / Register here |
|
Adapter for gas cartridges CG 1750 with integr.pressure reducer, DVGW-Safety- gas tubing 0,5m and lock valve
PO number | Package size | Price per package | |||
---|---|---|---|---|---|
9018751 This product of our assortment corresponds with your search. |
1 piece | Login / Register here |
|
Hot-Tray, stainless steel height optimized for schuett phoenix II
PO number | Package size | Price per package | |||
---|---|---|---|---|---|
9018756 This product of our assortment corresponds with your search. |
1 piece | Login / Register here |
|