Centrifuge tubes are specially designed to be placed in centrifuges to separate liquids, cells or other particles based on their density. During centrifugation, the contents are broken down into their components through rapid rotation around the fixed axis. The centrifugal force pushes the heavier components of the substance downwards, while the lighter ones remain at the top. In this way, solids can be reliably separated from liquids as well as substances of different densities.
Filter
Filter
Mini centrifuges LLG-uniCFUGE 2 and LLG-uniCFUGE 2/5
LLG
Compact and reasonably priced mini centrifuges with two rotor types. Speed can be adjusted to 4000 rpm or 6000 rpm. Powerful motor for fast starting. Quick stop when the lid is opened.
LLG-uni
CFUGE 2 with
Universal rotor for 6 x 1.5/2.0 ml and 6 x 0.5 ml tubes and 2 times 8 x 0.2 ml PCR-stripes....
expand_more
Click here to display 5 items
1
2
3
Compact and reasonably priced mini centrifuges with two rotor types. Speed can be adjusted to 4000 rpm or 6000 rpm. Powerful motor for fast starting. Quick stop when the lid is opened.
LLG-uniCFUGE 2 with Universal rotor for 6 x 1.5/2.0 ml and 6 x 0.5 ml tubes and 2 times 8 x 0.2 ml PCR-stripes.
LLG-uniCFUGE 2/5 wth rotor for 4 x 5 ml tubes.
Scope of supply: Centrifuge, mains cable
Specifications
Max. RCF: Max. speed: Motor:
1200 x g and 2000 x g 4000 rpm and 6000 rpm brushless DC motor
Max. load:
6 x 0.5/1.5/2 ml and 2 x 8-tube PCR strips (0.2 ml) or 4 x 5 ml tubes
The Z 206 A accepts up to 12 x 15 ml conical and round bottom tubes. For tubes with smaller dimensions we offer several adapters. For larger volumes we offer an angle rotor for 6 x 50 ml conical and round bottom tubes.
Microprocessor with LCD display
Electrical lid lock
Pre-selection of the rotor type
Active imbalance-identification and cut off
Manufactured according to international safety regulations, i.e. IEC 61010
Noise level under 60 dBA at max. speed
A large variety of rotors and accessoires
Easy change of rotors
Distinct control panel
...
expand_more
Click here to display 2 items
1
The Z 206 A accepts up to 12 x 15 ml conical and round bottom tubes. For tubes with smaller dimensions we offer several adapters. For larger volumes we offer an angle rotor for 6 x 50 ml conical and round bottom tubes.
Microprocessor with LCD display
Electrical lid lock
Pre-selection of the rotor type
Active imbalance-identification and cut off
Manufactured according to international safety regulations, i.e. IEC 61010
Noise level under 60 dBA at max. speed
A large variety of rotors and accessoires
Easy change of rotors
Distinct control panel
Specifications
Max. RCF:
4427 x g
Max. speed:
6000 rpm
Max. capacity:
6 x 50 ml
Timer:
59 min 50 sec / 10 sec increments 99 h 59 min / 1 min increments
The small Thermo Scientific™ Heraeus™ Megafuge™ 8 benchtop centrifuge offers high capacity for its small footprint and is very user-friendly. It is available air-cooled or with refrigeration and is suitable for a wide range of clinical and research applications.
High capacity with small footprint: 8 x 50 ml conical tubes in swing-out rotor, 24 x 5/7ml blood collection tubes, 30 SpinColumns or up to 4 microtitre plates
Safe Auto-Lock™ rotor change at the touch of a button in just 3 seconds
Certified aerosol-tight ClickSeal™ lids - can be easily closed and opened with one hand even when wearing gloves
Very quiet operation (< 58 dBA with TX-150 rotor)
One-touch operation with programme memory and optional password protection
Highly visible display with backlight
Glove- and detergent-friendly control panel
Multilingual user interface
Meets the latest clinical standards and safety requirements such as UL and IVD
Temperature range of the cooled centrifuge 8R: -10 to 40 °C
...
expand_more
Click here to display 2 items
The small Thermo Scientific™ Heraeus™ Megafuge™ 8 benchtop centrifuge offers high capacity for its small footprint and is very user-friendly. It is available air-cooled or with refrigeration and is suitable for a wide range of clinical and research applications.
High capacity with small footprint: 8 x 50 ml conical tubes in swing-out rotor, 24 x 5/7ml blood collection tubes, 30 SpinColumns or up to 4 microtitre plates
Safe Auto-Lock™ rotor change at the touch of a button in just 3 seconds
Certified aerosol-tight ClickSeal™ lids - can be easily closed and opened with one hand even when wearing gloves
Very quiet operation (< 58 dBA with TX-150 rotor)
One-touch operation with programme memory and optional password protection
Highly visible display with backlight
Glove- and detergent-friendly control panel
Multilingual user interface
Meets the latest clinical standards and safety requirements such as UL and IVD
Temperature range of the cooled centrifuge 8R: -10 to 40 °C
Specifications
Power supply:
230 V
Max. Capacity:
4 x 145 ml (with swing-out rotor) 6 x 50 ml (with fixed angle rotor)
Max. RCF
8:
3260 x g (with swing-out rotor) 24328 x g (with fixed angle rotor)
Microcentrifuge 5418 R (General Lab Product), cooled
Eppendorf
Microcentrifuge for standard molecular biology applications. The compact centrifuge with low access height is characterized by extremely quiet operation.
18 place rotor for 1.5 / 2.0 ml tubes and Microtainer®
Lid opens automatically after spinning
Very small profile, minimal bench space required
Remarkably silent, even without rotor lid
Standard, certified aerosol-tight rotor
Convenient Eppendorf two-dial operation
Rpm / rcf converter
Short-spin
The patented compressor technology reduces vibration to a minimum
Low access height of 26 cm
Keeps a constant 4 °C at max. speed
Fast Temp for rapid pre-cooling of the centrifuge
...
expand_more
Click here to display 2 items
Microcentrifuge for standard molecular biology applications. The compact centrifuge with low access height is characterized by extremely quiet operation.
18 place rotor for 1.5 / 2.0 ml tubes and Microtainer®
Lid opens automatically after spinning
Very small profile, minimal bench space required
Remarkably silent, even without rotor lid
Standard, certified aerosol-tight rotor
Convenient Eppendorf two-dial operation
Rpm / rcf converter
Short-spin
The patented compressor technology reduces vibration to a minimum
Low access height of 26 cm
Keeps a constant 4 °C at max. speed
Fast Temp for rapid pre-cooling of the centrifuge
This centrifuge is a General Lab Product for research purposes.
Non-refrigerated microcentrifuge for common standard applications with a high sample throughput, providing ergonomic comfort and great flexibility with its 6 rotor options.
Fast acceleration and deceleration (10 acceleration and braking ramps)
Lower noise level (< 51 dB)
Small footprint
Low loading height for comfortable inserting rotor and samples
Soft touch one-finger closure for ergonomic operation
Automatic lid opening after running
Rotor chamber made of stainless steel
...
expand_more
Click here to display 4 items
1
2
Non-refrigerated microcentrifuge for common standard applications with a high sample throughput, providing ergonomic comfort and great flexibility with its 6 rotor options.
Fast acceleration and deceleration (10 acceleration and braking ramps)
Lower noise level (< 51 dB)
Small footprint
Low loading height for comfortable inserting rotor and samples
Soft touch one-finger closure for ergonomic operation
Automatic lid opening after running
Rotor chamber made of stainless steel
This centrifuges are General Lab Products for research purposes.
Microcentrifuge 5430 / 5430 R (General Lab Product)
Eppendorf
These centrifuges are used with e.g. rotors for Eppendorf Tubes
® and PCR strips, rotors for microplates and 15 / 50 ml conical tubes, as well as a 48-place rotor, a 16-place rotor for Eppendorf Tubes
® 5.0 ml and a swing-out rotor (24 x 1.5 / 2.0 ml).
Microcentrifuge 5430...
expand_more
Click here to display 16 items
1
These centrifuges are used with e.g. rotors for Eppendorf Tubes® and PCR strips, rotors for microplates and 15 / 50 ml conical tubes, as well as a 48-place rotor, a 16-place rotor for Eppendorf Tubes® 5.0 ml and a swing-out rotor (24 x 1.5 / 2.0 ml).
Microcentrifuge 5430
48 place centrifuge for 1.5ml / 2.0ml micro test tubes, 6 x 50 ml Falcon® tubes or 2 x MTP plates
Automatic rotor identification
12 different rotors (available as accessories)
Stores up to 50 routine programs
Menu guided operation in 4 different languages
LCD display with backlighting
Automatic lid opening following application sequence (only 5430)
Microcentrifuge 5430 R, additional features:
Temp. range: -11°C to +40°C
+4°C at max. speed with all rotors
Continues cooling after the centrifugation process
Fast Temp for achieving required temperature in shortest possible time
Fast Temp pro for having the centrifuge refrigerated and ready-for-use at your desired pre-set time
This centrifuges are General Lab Products for research purposes.
These centrifuges combine a high capacity and versatility. Its main swing-bucket rotor holds both conical tubes and plates, no need to change rotor buckets or adapters. The 5910 R centrifuge has a low access height for easy operation. The 5910 R centrifuge holds standard 1 liter Nalgene
®...
expand_more
Click here to display 12 items
1
These centrifuges combine a high capacity and versatility. Its main swing-bucket rotor holds both conical tubes and plates, no need to change rotor buckets or adapters. The 5910 R centrifuge has a low access height for easy operation. The 5910 R centrifuge holds standard 1 liter Nalgene® bottles.
Plate rotor options for centrifugation of all types of MTP, PCR or Deepwell Plates
Fixed-angle rotors for high-speed molecular biology applications in tubes from 0.2 to 50 ml
Aerosol-tight Eppendorf QuickLock® caps and lids allow fast and ergonomic lid locking
Quiet operation (<59 db)
Compact footprint
Automatic rotor recognition and imbalance detection
FastTemp function for quick pre-cooling and FastTemp pro® function for automatic precooling based on pre-programmable time and date
Standby cooling function holds temperature when centrifuge is not in use
ECO shut-off engages after 8 hours (adjustable)
This centrifuges are General Lab Products for research purposes.
Due to the material separation at medium speeds, this midi centrifuge is ideal for all types of separation processes, such as in molecular biology. It can be used with standard 1.5 / 2 ml tubes as well as with PCR strips. The cover opens automatically at the press of a button.
High-performance motor
With metal cover
Starts only when the cover is firmly closed
Direct and easy setting of speed, rotational speed and programmes via membrane keypad
...
expand_more
Click here to display 1 items
1
Due to the material separation at medium speeds, this midi centrifuge is ideal for all types of separation processes, such as in molecular biology. It can be used with standard 1.5 / 2 ml tubes as well as with PCR strips. The cover opens automatically at the press of a button.
High-performance motor
With metal cover
Starts only when the cover is firmly closed
Direct and easy setting of speed, rotational speed and programmes via membrane keypad
Scope of delivery: Midi centrifuge inkl. metal rotor and cover for 12 vessels, with a capacity of 1.5/2 ml
Low speed benchtop centrifuge for biomedical applications with changeable rotors for accommodating centrifuge tubes (10 to 15 ml or 50 ml) or standard 96-well microtitre plates. Suitable for a wide range of analytical applications including biomedical, bio-organic and immunoenzyme analysis.
Easy set-up of spin speed and time via 2-line LCD display and push buttons
Powerful and quiet motor (59.4 dBA) with soft start-up and run-down function
Timer with automatic switch-off
Automatic imbalance switch-off
Lid lock when centrifuge is running
Sturdy metal housing and lid
Compact design with small footprint
...
expand_more
Click here to display 1 items
1
Low speed benchtop centrifuge for biomedical applications with changeable rotors for accommodating centrifuge tubes (10 to 15 ml or 50 ml) or standard 96-well microtitre plates. Suitable for a wide range of analytical applications including biomedical, bio-organic and immunoenzyme analysis.
Easy set-up of spin speed and time via 2-line LCD display and push buttons
Powerful and quiet motor (59.4 dBA) with soft start-up and run-down function
In order to meet the variety of different requirements, we offer centrifuges in a wide range of formats, sizes and materials.
Application and quality
Centrifuge tubes are used wherever the components need to be split - for example, for blood samples to separate the plasma, to isolate proteins or DNA, to collect cell cultures
or microorganisms from cultures, for the concentration of particles from environmental samples... The range of applications is diverse.
The high demands placed on these analyses also mean that no compromises can be made when selecting the centrifuge tubes used.
At Th. Geyer, we therefore focus on the highest quality and maximum safety - even at maximum speeds and high centrifugal pressure.
The material
You can choose between plastic, glass and stainless steel for the raw materials used. While stainless steel usually plays a subordinate role, plastics such as polypropylene (PP), polyamide (PA), polyethylene (PE) or polycarbonate (PC) are the standard in laboratories and research environments.
Depending on the type of plastic, centrifuge tubes can withstand very low to very high temperatures.
They are stable against chemicals and can be translucent or opaque, depending on requirements.
Centrifuge tubes made of glass impress with their basic resistance to chemicals, acids, bases and organic solvents.
The glass variants score points with their reusability and above-average durability. If required, glass allows a high degree of transparency and offers relatively easy handling
If the material is subjected to high speeds during centrifugation, plastic is usually the better choice.
Th. Geyer offers centrifuge tubes in both variants.
The sizes
Th. Geyer meets the specific requirements for the dimensions and capacity of centrifuge tubes with a large selection of different sizes.
These can be up to 500 ml, while sizes such as 50 mL and 15 mL are available for smaller filling volumes. In the micro range, centrifuge tubes are between 1.5 mL and 0.2 mL, which are mainly used in laboratories.
Of course, we offer you a wide selection of all common formats.
The lid
During centrifugation, the lid of the centrifuge tube prevents liquid from leaking out. Traditionally, screw, push-in or plug-in lids are used for this purpose, which are easy to close.
Micro centrifuge tubes are usually fitted with a snap-on cap. For very large variants, threaded lids ensure leakage protection. You will find both models with and without lids in our range.
Depending on your choice, you can always order stoppers and the like separately.
The base
The different base variants also meet the respective requirements. The conical base with its slightly tapered shape allows for selective material collection, making separation and removal much easier
Sample recovery is particularly high. Alternatively, you can also choose between self-standing centrifuge tubes with a flat base or a rounded base.
Benefit from our portfolio of centrifuge tubes
Are you looking for centrifuge tubes for demanding applications? Th. Geyer offers a wide range of the highest quality. Functional, easy to handle and with an attractive price-performance ratio.
Please feel free to send us your enquiry or contact us directly in person. We look forward to hearing from you!