Aspirators

Designed for routine aspiration of the supernatent alcohol/buffer from the walls of microtubes during DNA/RNA purification and other macromolecule reprecipitation techniques.

• Fitted with hydrophobic microbiological filter
• The hydrophobic microbiological suction filter eliminates risk of contamination from the trap flask. Efficiency up to 99.9 %, holds particles bigger than 0.027 micron, which are smaller than agents of Hepatitis A, B and C.
• Polyethylene tube connects collecting tip to the trapping flask
• Built-in micro-compressor creates negative pressure in trapping flask for removal of liquid from microtubes

Scope of supply: Aspirator system with integrated pump, trap flask, aspiration tip and tube holders for 2 tubes

Specifications
Aspiration rate:	up to 10 l/min
Flow rate:	72 ml/min with collecting tip 666 ml/min without collecting tip
Specifications
Volume Trap flask:	1 l
Vacuum range:	500 mbar
Dimensions (W x D x H):	160 x 210 x 340 mm
Weight:	1.7 kg

Accessories Accessories for Aspirator FTA-1 Accessories Adapter sets for Aspirator FTA-1 / FTA-2i

Scope of supply:
HAS-1: Handheld vacuum controller, 1-channel adapter (with ejector) for 200 µl tips, 1-channel adapter with 125 mm stainless steel pin, 1-channel adapter with 40 mm stainless steel pin, 8-channel adapter (with ejector) for 200 µl tips, 8-channel adapter with 35 mm stainless steel pin, SH-6 stand
MA-8: Tube adaptor, 8 channel aspiration tip, 8 channel tip holder

With GL-threaded necks and screw caps. Suitable for GL45 threaded bottles. The distributors are ideal for decanting liquids, whereby the necks are connected either to a liquid source or to an excess pressure or vacuum system (up to 8,5 mm max. tubing diameter). For hassle-free connection, we recommend the Bola threaded connector (please order separately) in accordance with the outer diameter of the tubing.

The CELLCOAT® product line comprises cell culture vessels which are coated with proteins of the extracellular matrix or synthetic proteins. Beside an improved adhesion and proliferation of primary cells and various cell lines. CELLCOAT® plates are highly suitable for serum-free and serum-reduced cell cultivation. Experiments which include additional washing steps or stressful procedures, e.g. transfection. Moreover, the differentiation of individual cell types can be enhanced through the protein-coating.
Collagen Type I is a protein of the extracellular matrix, an intercellular substance which in vivo influences adhesion, migration and proliferation among other processes. Collagen Type I represents one of the most important ECM proteins for in-vitro cell cultures.

Proporties:

• difficult-to-cultivate cells adhere show a positive growth behaviour
• positive influence on differentiation and morphology
• Cell culture flasks with filter caps
• Shelf life: 24 months at room temperature
• Further cell culture vessels coated with Collagen Type I available on request

The compact BioChem-VacuuCenter offers the perfect solution for safe, sensitive and efficient aspiration of supernatants or filtration in all application areas.

• The BVC basic is designed for connection to an existing external vacuum source like a diaphragm pump or a vacuum network
• The BVC control and professional serve for efficient and convenient aspiration of supernatants. The vacuum level and thus the suction force is sensitively adjustable by the electronic touch panel and allows a delicate and reproducible operation. The chemically-resistant diaphragm vacuum pump is automatically turned on and off as needed, which reduces the low noise level even further.
• The BVC professional, with 4L PP bottle and self-closing quick couplings minimises risks in transporting hazardous waste and contamination of the workplace.
• All systems are available in two complete equipment options with different collection flasks and ready to accept a second aspiration hand controller (VHC) to support two users. The 2L borosilicate glass bottle (all types with "G" in the description) with a protective coating has a very high chemical resistance. For larger amounts of liquids the 4L bottle of unbreakable polypropylene (PP) is used.

Accessories Accessories for BioChem-VacuuCenter BVC 21 NT / BVC 01

For safe and comfortable aspiration of liquid supernatants in cell culture. Increases work safety when handling with infectious material. Self-locking fittings close the bottle automatically and seal it hermetically for transport.

• Completely autoclavable
• Breakproof and chemical-resistant safety bottle
• Safety filter between bottle and pump prevents contamination and premature wear
• A commercial Pasteur pipette is used for aspiration (available separately)

Please order optional vacuum pump separately.

Replacement covers and other spare parts on request.

Scope of supply: Safety suction system, safety bottle with screw cap and 2 self- locking fittings, silicone tubing 2 x 1.5 m (autoclavable), safety filter, 2 house couplings for tubing connection, 1 aeration insert

Accessories Vacuum pump for safety suction system EcoVac Accessories Foot switch for safety suction system EcoVac Accessories Safety filter for safety suction system EcoVac, PTFE Accessories Safety bottles for safety suction system EcoVac, PP Accessories Pasteur pipettes for safety suction system EcoVac, glass Alternative QuikSip™ BT-aspirator

The vacuum pump, a double-chamber membrane pump, is connected to the safety suction system EcoVac.

• Low noise and vibration
• Illuminated on/off switch
• Incl. 1 m connection cable

Replacement bottles made of PP for collecting the aspirated supernatant liquid from dishes, test plates, or tubes.

• Autoclavable
• Breakproof and chemical-resistant
• Incl. screw cap with 2 self-locking fittings

Supplied without house couplings. House couplings available on request.

For operating the pump during repeated short-term use of the safety suction system EcoVac.

Safety filter with PP housing and PTFE membrane. For filtration of the aspirated supernatant liquid. The safety filter between the collection bottle and the pump prevents contamination and premature wear of the vacuum pump.

The DITABIS Aspiration Systems are made for the controlled aspiration of liquids from typical lab containers like cuvettes, tubes, microplates, petri dishes or roller bottles. They are also suited for the disposal of liquid biological or chemical waste and filtration of liquids by means of filter systems.

• Membrane vacuum pump
• 2L or 4L bottle incl. fast lock clutches, filter, ventilation insert and 3M silicone hose

Features AA series:

• Membrane vacuum pump turns on and off automatically
• AA 02/04 with 1 handle
• AA 24 with 4L bottle, 2 handles and Y connector
• Enlarge the automatic suction system by adding up to 4 working places and reduce your expenses for each user.

Features AC series:

• Membrane pump with manual switch-off
• 2L or 4L bottle

Features AZ series:

• Small membrane vacuum pump
• 2L or 4L bottle
• Bottle holder optional

Alternative Safety suction systems AE and AK series Alternative Safety suction system EcoVac

The DITABIS Aspiration Systems are made for the controlled aspiration of liquids from typical lab containers like cuvetts, tubes, microplates, petri dishes or roller bottles. They are also suited for the disposal of liquid biological or chemical waste and filtration of liquids by means of filter systems.

Suction systems for vacuum connection in the laboratory

Supplied with:

• 2L or 4L bottle incl. fast lock clutches, filter, ventilation insert and 3M silicone hose
• AK 02/04 with bottle holder and handle

Alternative Safety suction systems AA, AC and AZ series Alternative Safety suction system EcoVac

Designed for routine aspiration of the supernatent alcohol/buffer from the walls of microtubes during DNA/RNA purification and other macromolecule reprecipitation techniques.

• Fitted with hydrophobic microbiological filter
• The hydrophobic microbiological suction filter eliminates risk of contamination from the trap flask. Efficiency up to 99.9 %, holds particles bigger than 0.027 micron, which are smaller than agents of Hepatitis A, B and C.
• Polyethylene tube connects collecting tip to the trapping flask
• Built-in micro-compressor creates negative pressure in trapping flask for removal of liquid from microtubes

Scope of supply: Aspirator system with integrated pump and trap flask

Specifications
Aspiration rate:	up to 10 l/min
Flow rate:	72 ml/min with collecting tip 666 ml/min without collecting tip
Specifications
Volume Trap flask:	2 l
Vacuum range:	200 ... 800 mbar (adjustable)
Dimensions (W x D x H):	185 x 290 x 390 mm
Weight:	1.85 kg

Accessories Adapter sets for Aspirator FTA-1 / FTA-2i Accessories Holders, stainless steel for Aspirator FTA-2i

The Gilson Safe Aspiration Kit contains convenient and useful tools for safe liquid aspiration in combination with the Gilson Safe Aspiration Station.

Included are:

• Handel and tubing set
• Holder
• Stainless steel needle adaptor
• Tip adaptor
• Tip adaptor with tip ejector
• 8-needle stainless steel adaptor
• 8-tip adaptor with tip ejector