-
- General laboratory consumables
- Occupational safety, Security
- Analytical measurement and testing
- Stirring, Shaking, Mixing
- Sample preparation
- Distillation, separation, filtration
- Heating and cooling technology
- Liquid Handling
- Vacuum technology, Drying, Dry storage
- Optical instruments and microscopes
- Cleaning and sterilisation
- Environmental-, soil-, water-, food analysis
- Chromatography
- Cleanroom
Thermoblocks
With natural rubber / TEF septa
Crimp seals ND11 are made of aluminium. They are clear or lacquered in different colours and have a 5.5 mm hole. They are supplied with fitted septa made of a variety of materials.
These septa are temperature-resistant from -40 °C to 120 °C and ideal for multiple injections thanks to their excellent resealability properties....
Screw neck vials and micro-vials ND8, small opening
Screw neck vials and micro-vials ND8 are available in clear and amber first hydrolytic class glass. They have a 8-425 thread and are used as standard in GC and HPLC applications. A large selection of micro-inserts with a 5 mm diameter is available for these vials. The micro-vials often require an adapter so that they can be used in an autosampler....
Short thread vials and micro-vials ND9, wide opening
Short thread vials and micro-vials ND9 are available in clear and amber first hydrolytic class glass and can be used on almost all autosamplers. You can replace other 1.5 ml vial types like 11 mm crimp neck vials, 8-425 and 10-425 screw neck vials, which can help rationalize stocks.
...
With silicone / PTFE septa
Short thread screw seals ND9 are made of PP and are supplied with fitted septa made of a variety of materials. They have a 6 mm centre hole and are available in different colours. The screw caps are similar in shape to the crimp caps and are therefore also suitable for robotic handling.
These septa are temperature-resistant from -60 °C to 200 °C and have better purity than septa made of natural rubber, butyl or red rubber. However, they have less effective resealability properties and are therefore more suitable for single-injection applications. Septa with a double-sided PTFE coating show a very low particle formation during penetration....
With RedRubber / PTFE septa
Short thread screw seals ND9 are made of PP and are supplied with fitted septa made of a variety of materials. They have a 6 mm centre hole and are available in different colours. The screw caps are similar in shape to the crimp caps and are therefore also suitable for robotic handling.
These septa are temperature-resistant from -40 °C to 110 °C. They are easier to penetrate and have lower particle formation than septa made of natural rubber....
With silicone / PTFE septa
Screw seals ND8 are made of PP and are supplied without or with fitted septa made of a variety of materials. They have a 8-425 thread, a 5.5 mm centre hole or are closed.
These septa are temperature-resistant from -60 °C to 200 °C and have better purity than septa made of natural rubber, butyl or red rubber. However, they have less effective resealability properties and are therefore more suitable for single-injection applications. Septa with a double-sided PTFE coating show a very low particle formation during penetration....
With silicone / PTFE septa
Crimp seals ND11 are made of aluminium. They are clear or lacquered in different colours and have a 5.5 mm hole. They are supplied with fitted septa made of a variety of materials.
These septa are temperature-resistant from -60 °C to 200 °C and have a better purity than septa made of natural rubber or red rubber. However, they have less effective resealability properties and are therefore more suitable for single-injection applications....
Screw neck vials ND13
Screw neck vials ND13 with 13-425 thread made of clear and amber first hydrolytic class glass facilitate easy filling with viscous substances thanks to their wide opening.
The LABSOLUTE® vials for optimised micro-sampling are the best solution for very small sample volumes....
With silicone / PTFE septa, Ultraclean
Crimp and headspace seals ND20 are made of aluminium and are supplied with fitted septa made of a variety of materials. There are the following different types of caps available:
Plain caps with a 10 mm center hole. These caps are suitable for standard applications. They are available in several colours on request....
Screw neck vials ND24 (EPA)
Screw neck vials ND24 made of clear and amber first hydrolytic class glass are suitable for EPA (Environmental Protection Association) analysis and can, upon request, be supplied with a sterility certificate that is specifically required for TOC analyses.
These vials are especially used with autosamplers made by Agilent, Dionex, Shimadzu, Tekmar, Thermo Scientific and Varian....
Crimp neck and headspace vials ND20
Crimp neck and headspace vials ND20 with rounded or flat bottom made of clear and amber first hydrolytic class glass need to be able to withstand very high internal pressures and, as a result, their walls are generally 1.2 mm thick. The vials are available with a flat DIN crimp neck or with a bevelled neck (HS neck)....
With natural rubber / TEF septa
Screw seals ND10 are made of PP and have a 10-425 thread. They have a 7 mm centre hole or are closed. Screw seals are supplied with fitted septa made of a variety of materials or without any septa.
These septa are temperature-resistant from -40 °C to 120 °C and ideal for multiple injections thanks to their excellent resealability properties....
Screw neck vials ND15 / ND18
Screw neck vials ND15 and ND18 made of clear and amber first hydrolytic class glass in combination with the corresponding screw caps are highly suitable as sample storage vials.
Screw neck vials ND15 have a 15-425 thread. ND18 vials have a 18-400 thread.
Item 7.616 139 is also suitable for headspace analysis (Perkin Elmer)....
With RedRubber / PTFE septa
Screw seals ND10 are made of PP and have a 10-425 thread. They have a 7 mm centre hole or are closed. Screw seals are supplied with fitted septa made of a variety of materials or without any septa.
These septa are temperature-resistant from -40 °C to 110 °C and easier to penetrate and have lower particle formation than septa made of natural rubber....
With bromo-butyl / PTFE septa, Pharma-Fix
Crimp and headspace seals ND20 are made of aluminium and are supplied with fitted septa made of a variety of materials. There are the following different types of caps available:
Plain caps with a 10 mm center hole. These caps are suitable for standard applications. They are available in several colours on request....
With silicone / PTFE septa, Ultrabond, EPA quality
Screw seals ND24 (EPA) are made of PP and are supplied with or without fitted septa made of a variety of materials. They have a 24-400 thread, a 15 mm centre hole or are closed.
These septa are temperature-resistant from -60 °C to 200 °C and have better purity than septa made of natural rubber, butyl or red rubber. However, they have less effective resealability properties and are therefore more suitable for single-injection applications....
With bromo-butyl / PTFE septa
Crimp and headspace seals ND20 are made of aluminium and are supplied with fitted septa made of a variety of materials. There are the following different types of caps available:
Plain caps with a 10 mm center hole. These caps are suitable for standard applications. They are available in several colours on request....
With natural rubber / TEF septa
Snap ring seals ND11 are made of PE and are supplied with fitted septa made of a variety of materials. They are available in a soft and hard version as well as in different colours. Snap ring seals are very easy to use, time-saving and inexpensive.
These septa are temperature-resistant from -40 °C to 120 °C and ideal for multiple injections thanks to their excellent resealability properties....
With butyl / PTFE septa
Screw seals ND8 are made of PP and are supplied without or with fitted septa made of a variety of materials. They have a 8-425 thread, a 5.5 mm centre hole or are closed.
These septa are temperature-resistant from -40 °C to 120 °C and have excellent chemical properties with regard to cleanliness....
With silicone / PTFE septa
Precision thread screw seals ND18 are made of metal and supplied with fitted septa made of a variety of materials. The hole size is selected so that the cap is suitable both for SPME and headspace applications. However, enough surface is left for the magnet to be able to transport a completely filled vial. The screw-on mechanism ensures that the cap always has a flat surface so that the bottle cannot fall from the magnet. Separation of the vial and cap for disposal after analysis is much easier than with crimp caps....
With RedRubber / PTFE septa
Crimp seals ND11 are made of aluminium. They are clear or lacquered in different colours and have a 5.5 mm hole. They are supplied with fitted septa made of a variety of materials.
These septa with instrument manufacturer's quality are temperature-resistant from -40 °C to 110 °C. They are easier to penetrate and have lower particle formation than septa made of natural rubber....
With silicone / PTFE septa, Ultrabond
Short thread screw seals ND9 are made of PP and are supplied with fitted septa made of a variety of materials. The caps have a 6 mm centre hole and are available in different colours. The screw caps are similar in shape to the crimp caps and are therefore also suitable for robotic handling.
...
Precision thread headspace vials ND18
Precision thread headspace vials ND18 made of clear and amber first hydrolytic class glass are a practical alternative to the corresponding crimp neck vials ND20. Thanks to its many thread turns, the precision thread ensures that the septum is pressed firmly against the glass neck, keeping the vial gas-tight....
Special seals for crimp neck ND8
The blue Push-On caps made of PE have a thinned penetration point, but no additional septum. They are an inexpensive alternative to crimp caps for non-critical applications.
The transparent PE caps are 9 x 5.9 mm and have a 4 mm centre hole.
Septa made of natural rubber are temperature-resistant from -40 °C to 120 °C and ideal for multiple injections thanks to their excellent resealability properties....
Kits ND9
The LABSOLUTE® kits ND9 contain shrink-wrapped short thread vials ND9 made of clear or amber first hydrolytic class glass and corresponding short thread screw caps made of PP.
Kits containing Ultrabond seals are especially for the use with Waters autosamplers....
With silicone / PTFE septa
Snap ring seals ND11 are made of PE and are supplied with fitted septa made of a variety of materials. They are available in a soft and hard version as well as in different colours. Snap ring seals are very easy to use, time-saving and inexpensive.
These septa are temperature-resistant from -60 °C to 200 °C and have better purity than septa made of natural rubber, butyl or red rubber. However, they have less effective resealability properties and are therefore more suitable for single-injection applications....
With natural rubber / TEF septa
Short thread screw seals ND9 are made of PP and are supplied with fitted septa made of a variety of materials. They have a 6 mm centre hole and are available in different colours. The screw caps are similar in shape to the crimp caps and are therefore also suitable for robotic handling.
These septa are temperature-resistant from -40 °C to 120 °C and are ideal for multiple injections thanks to their excellent resealability properties....
With natural rubber / TEF septa
Screw seals ND8 are made of PP and are supplied without or with fitted septa made of a variety of materials. They have a 8-425 thread, a 5.5 mm centre hole or are closed.
These septa are temperature-resistant from -40 °C to 120 °C and ideal for multiple injections thanks to their excellent resealability properties....
Snap ring vials and micro-vials ND11, wide opening
Snap ring vials and micro-vials ND11 made of clear and amber first hydrolytic class glass can be used on almost all autosamplers and can also be used on equipment with robotic handling.
As an alternative to snap ring seals, snap ring vials and micro-vials, ND11 can also be sealed with crimp seals ND11 since the two snap ring lips together have the same height as a crimp neck....
With butyl / PTFE septa
Screw seals ND15 are made of PP and are supplied without or with fitted septa made of a variety of materials. They have a 15-425 thread, a 9 mm centre hole or are closed.
Screw seals ND18 are made of PP and are supplied with or without fitted septa made of a variety of materials. They have a 18-400 thread, a 12 mm centre hole or are closed....
Without septa
Screw seals ND8 are made of PP and are supplied without or with fitted septa made of a variety of materials. They have a 8-425 thread, a 5.5 mm centre hole or are closed.
Suitable septa with a diameter of 8 mm made of different materials are available on request....
With butyl / PTFE septa
Screw seals ND13 are made of PP and have a 13-425 thread. They have a 8.5 mm centre hole or are closed. Screw seals are supplied with fitted septa made of a variety of materials or without any septa.
These septa are temperature-resistant from -40 °C to 120 °C and have excellent chemical properties....
With silicone / PTFE septa, EPA quality
Screw seals ND24 (EPA) are made of PP and are supplied with or without fitted septa made of a variety of materials. They have a 24-400 thread, a 15 mm centre hole or are closed.
These septa are temperature-resistant from -60 °C to 200 °C and have better purity than septa made of natural rubber, butyl or red rubber. However they have less effective resealability properties and are therefore more suitable for single-injection applications....
With butyl / PTFE septa
Screw seals ND24 (EPA) are made of PP and are supplied with or without fitted septa made of a variety of materials. They have a 24-400 thread, a 15 mm centre hole or are closed.
These septa are temperature-resistant from -40 °C to 120 °C and have excellent chemical properties....
Without septa
Screw seals ND13 are made of PP and have a 13-425 thread. They have a 8.5 mm centre hole or are closed. Screw seals are supplied with fitted septa made of a variety of materials or without any septa.
Suitable septa with a diameter of 12 mm made of different materials are available on request....
With butyl / PTFE septa
Precision thread screw seals ND18 are made of metal and supplied with fitted septa made of a variety of materials. The hole size is selected so that the cap is suitable both for SPME and headspace applications. However, enough surface is left for the magnet to be able to transport a completely filled vial. The screw-on mechanism ensures that the cap always has a flat surface so that the bottle cannot fall from the magnet. Separation of the vial and cap for disposal after analysis is much easier than with crimp caps....
With silicone / aluminium septa
Screw seals ND24 (EPA) are made of PP and are supplied with or without fitted septa made of a variety of materials. They have a 24-400 thread, a 15 mm centre hole or are closed.
These septa are temperature-resistant from -60 °C to 220 °C and have better purity than septa made of natural rubber or red rubber. However, they have less effective resealability properties and are therefore more suitable for single-injection applications. The silicone is fully coated with a silver aluminium foil....
With RedRubber / PTFE septa
Screw seals ND8 are made of PP and are supplied without or with fitted septa made of a variety of materials. They have a 8-425 thread, a 5.5 mm centre hole or are closed.
These septa are temperature-resistant from -40 °C to 110 °C and easier to penetrate and have lower particle formation than septa made of natural rubber....
With silicone / PTFE septa, magnetic
Short thread screw seals ND9 are made of PP and are supplied with fitted septa made of a variety of materials. They have a 6 mm centre hole and are available in different colours. The screw caps are similar in shape to the crimp caps and are therefore also suitable for robotic handling.
These short thread screw seals have a mounted magnetic sleeve (gold colour). They are more convenient and secure to handle than 11 mm magnetic crimp seals. The septa are temperature-resistant from -60 °C to 200 °C. The caps have been officially tested and approved for CTC....
Without septa
Screw seals ND24 (EPA) are made of PP and are supplied with or without fitted septa made of a variety of materials. They have a 24-400 thread, a 15 mm centre hole or are closed.
Suitable septa with a diameter of 22 mm made of different materials are available on request....
Short thread vials and micro-vials ND9, SureStop
The short thread vials ND9 SureStop are available in clear and amber first hydrolytic class glass and are the best available on the market in terms of seal tightness and reliability. The vials have an additional stopper ring at the end of the thread which clearly marks the end point in the screwing-in process. This ensures that the tightness of the seal is independent of the touch or feel of the user screwing the stopper in. This ensures the lowest possible number of standard deviations and high reproducibility of analysis results....