Hücre bozulma

Polished stainless steel, micropestles. Precisely fitted for Eppendorf Safe-Lock Tubes™, manufactured in one-piece, smooth handle sections, can be disinfected easily. Minimum homogenate displacement due to tapered piston.

For Reaction tubes:
For homogenisation of cells, tissues or foodstuffs / feed samples.

• For tubes with 0.5 ml, 1.5 ml, and 2.0 ml
• Can be cooled down to -196 °C
• Sterilisable in an autoclave or dry heat at 200 °C
• Suitable for PCR applications
• Alternative to single-use plastic pestles
• Perfectly suitable for Eppendorf Safe-Lock Tubes

96 Well Polystyrene Microplates are manufactured under DIN ISO 9001 guidelines and can be traced all the way back to production through a defined LOT number system. Furthermore they are footprint compatible with automated systems. Polystyrene is a highly clear polymer with excellent optical properties which makes it ideal for precise optical measurements. An it is suitable for work with cell cultures.

Properties:

• Are manufactured without the use of siliconbased mould release
• U-Bottom: ideally suited for agglutination tests, no sharp corners
• V-Bottom: entire sample volume must be pipetted off
• F-Bottom / Standard (ST): for precise optical measurements, microscopic applications (bottom reading)
• Are analysed for detectable DNase, RNase and human DNA
• Are free of biocides and antistatics

For use with all homogeniser drive-units or for schuett homgen^plus.
Homogenisers and pestles provide a precise shape and are consequently separately exchangeable. Clearance between pestle and homogeniser is between 0.18 and 0.23 mm.

Homogeniser with PTFE pestle
Tapered or cylindrical. Shaft made of stainless steel. Inert. Elastic. With smooth, wax-like, moisture-rejecting surface. Resistant against high temperatures. Also available as glass fiber reinforced model. Highly efficient with especially tough tissue.

Homogeniser with glass pestle
Tapered or cylindrical. With robust glass shaft. Ground-glass surface in cylindrical/tapered part. Highly efficient with tough tissue.

Homogenizers and pestles also available individually as spare parts.

Glass mortar Type 1:	With flared overflow neck and spout, conical
Glass mortar Type 2:	Without flared overflow neck, cylindrical
Glass mortar Type 3:	With flared overflow neck and spout, cylindrical
Glass mortar Type 4:	Round bottom, with flared overflow neck, without spout, cylindrical

Aksesuarlar  Aksesuarlar Ground Joint GL Adapters, PTFE

Autoclavable micro-pestle for re-suspending pellets in 1.5 to 2.0 ml containers.

Autoclavable polypropylene. Suitable for battery-operated drive motor (9.314 496). Pestle length 7cm. Supplied with reaction tube, except Cat. No. 9.314 492 and 9.314 493.

Aksesuarlar Micro pestles, accessory drive motor Alternatif  Alternatif Micro pestles, CTFE / stainless steel

Glass. Suitable if the nuclei are to be maintained after homogenising.
Two pestles are supplied:

• Pestle "A" for pre-grinding
• Pestle "B" for fine grinding

Spare components are available and are completely interchangeable.

Aksesuarlar Spare components for dounce homogenizers Alternatif Homogenisers DUALL®, with glass pestle Alternatif Homogenisers DUALL®, with PTFE pestle

For resuspending pellets and homogenising within tubes (1.5, 2.0ml, exact fit). Autoclavable. Suitable for homogeniser/motor drive.

Aksesuarlar PCR tubes strips, PP, with attached single caps, 1 ridge Aksesuarlar Micro pestles, accessory drive motor Alternatif Homogenisers with PTFE or glass pestles

• Precision Bore Borosilicate glass mortars with a range from 5.0 to 55ml capacity
• Borosilicate glass pestle
• All parts are fully autoclavable

Grinding Clearance Pestle and Mortar: 0.152 to 0.254mm

Potter Elvehjem & Dounce. Safe homogenisation without much effort, for gentle digestion of biological samples and tough, difficult to homogenize material, so that a high proportion of intact cell nuclei can be isolated.

• Large stability, vibration-free due to robust 3-fold stand construction
• 4-digit display for reproducible homogenisation
• Easy handling
• Steplessly adjustable, electronic speed control from 40 - 3000 min-1
• High torque drive, powerful even at low speeds
• Flexible use
• Large selection of conical and cylindrical homogenizers and pestle (PTFE, glass and also glass fibre reinforced)
• Tubes with volumes from 1.5 to 40 ml and outer diameters from 10 to 40 mm can be used
• Use of Eppendorf^® microreaction vessels with 1.5 ml possible
• Chuck with hollow shaft for quick and easy pestle change and the use of different shaft lengths and diameters
• For optimum cooling, the cooling vessel can be filled with ice or ice water

Supplied with: schuett homgen^plus homogeniser drive unit with universal keyless chuck, incl. cooling vessel, 1000 ml and universal chuck set (consisting of 6 sizes).

We also offer a sterile alternative for use in a glove box and with infectious material. Details on request.

With conical and cylindrical area for effective tissue for grinding and also for homogenising. Especially suitable for cellular tissue such as muscle, heart and lungs. The pestle is sufficiently stable to be motor driven. The space between the pestle and mortar is between 0.1mm to 0.15mm. Spare components are available and are completely interchangeable.

Alternatif Dounce homogenizers Alternatif Homogenisers DUALL®, with PTFE pestle