The powder-free, natural-coloured LABSOLUTE® disposable latex gloves made of natural rubber with a rolled cuff offer excellent elasticity and wearing comfort. The gloves with textured fingers can be used in a wide variety of areas such as in pharmaceutical and chemical laboratories or the food industry.

The LABSOLUTE® latex gloves with an AQL value of 1.5 comply with the following standards and directives

• EN 420, EN ISO 374-1, -2, -4, -5 and EN 16523-1
• (EU) 2016/425 (PPE in accordance with CE category III for complex risks)
• 1935/2004 (can be used in direct contact with food)
• ASTM 1671 / ISO 16604 (viral penetration)

Further properties:

• Delivered in handy dispenser boxes of 100 (S, M, L) or 90 pieces (XL)
• Free from phthalates and softeners
• Storage life: 3 years
• Length: approx. 240 mm
• Thickness (double): finger min. 0.24 mm, palm min. 0.20 mm, cuff min. 0.12 mm
• Easy to put on and off
• Skin-friendly
• Can be worn on the left or right hand

Accessories Holder for glove boxes, stainless steel Alternative Disposable gloves, nitrile Sensitive, powder-free Alternative Disposable gloves, nitrile Protective, powder-free

The powder-free, lavender blue LABSOLUTE® disposable gloves Sensitive made of nitrile are flat with a rolled cuff and offer excellent elasticity and wearing comfort. A special after-treatment makes these LABSOLUTE® disposable gloves skin friendly and easy to put on. The gloves have textured finger tips.

The LABSOLUTE® nitrile gloves with an AQL value of 1.5 comply with the following standards and directives

- EN 420, EN ISO 374-1, -2, -4, -5 and EN 16523-1

• (EU) 2016/425 (PPE in accordance with CE category III for complex risks)
• 1935/2004 (can be used in direct contact with food)
• ASTM 1671 / ISO 16604 (viral penetration)

Further properties:

• Approved for the use within Hazard Analysis and Critical Control Points (HACCP) concepts
• Resistance against ethidium bromide (1 %) for more than 480 min (level 6)
• Delivered in handy dispenser boxes of 200 (XS, S, M, L) or 180 pieces (XL)
• Free from phthalates, softeners and allergenic latex proteins
• Storage life: 3 years
• Length: approx. 240 mm
• Thickness (double): finger min. 0.14 mm, palm min. 0.12 mm, cuff min. 0.10 mm
• Can be worn on the left or right hand

Accessories Holder for glove boxes, stainless steel Alternative Disposable gloves, nitrile Protective, powder-free Alternative Disposable gloves, latex, powder-free

The powder-free, blue LABSOLUTE® disposable gloves Protective made of nitrile with a rolled cuff are the best supplement to the LABSOLUTE® Sensitive gloves for a higher protection level.

The silicone-free gloves with an AQL value of 1.5 are textured on the outside and comply with the following standards and directives

• EN 420, EN 421, EN ISO 374-1, -2, -4, -5 and EN 16523-1
• (EU) 2016/425 (PPE in accordance with CE category III for complex risks)
• 1935/2004 (can be used in direct contact with food)
• ASTM 1671 / ISO 16604 (viral penetration)

Further properties:

• Approved for the use within Hazard Analysis and Critical Control Points (HACCP) concepts
• UV transmission less than 0.1 % at 360 nm
• Delivered in handy dispenser boxes of 100 (S, M, L) or 90 pieces (XL)
• Free from phthalates, softeners and allergenic latex proteins
• Storage life: 3 years
• Length: approx. 240 mm
• Thickness (double): finger min. 0.30 mm, palm min. 0.22 mm, cuff min. 0.20 mm
• Can be worn on the left or right hand

Accessories Holder for glove boxes, stainless steel Alternative Disposable gloves, latex, powder-free Alternative Disposable gloves, nitrile Sensitive, powder-free

The powder-free LABSOLUTE® disposable gloves nitrile GREEN are flat with a rolled cuff and offer excellent elasticity and wearing comfort. The gloves have textured finger tips.

They are extremly skin-friendly, because they are free from chlorine and natural rubber proteins. The gloves use less water, energy and carbon dioxide during the production process as similar disposable gloves making these gloves a more sustainable option.

The LABSOLUTE® nitrile gloves with an AQL value of 1.5 comply with the following standards and directives

- EN 420, EN ISO 374-1, -2, -4, -5 and EN 16523-1

• (EU) 2016/425 (PPE in accordance with CE category III for complex risks)
• 1935/2004 (can be used in direct contact with food)
• ASTM 1671 / ISO 16604 (viral penetration)

Further properties:

• Resistance against ethidium bromide (1 %) for more than 480 min (level 6)
• Delivered in handy dispenser boxes of 200 (S, M, L) or 180 pieces (XL)
• Free from phthalates, softeners and allergenic latex proteins
• Free from rubber accelerators
• Storage life: 3 years
• Length: approx. 240 mm
• Thickness (double): finger min. 0.14 mm, palm min. 0.12 mm, cuff min. 0.10 mm
• Easy to don thanks to a synthetic inner coating
• Can be worn on the left or right hand

Accessories Holder for glove boxes, stainless steel Alternative Disposable gloves, nitrile Protective, powder-free Alternative Disposable gloves, latex, powder-free Alternative Disposable gloves, nitrile Sensitive, powder-free

This acrylic LABSOLUTE® pipette rack keeps the pipettes and tips together in one convenient stand. Up to four pipettes can be stored within the provided openings. The dual reservoirs offer space for different sizes of pipette tips which can easily be taken out even while wearing gloves. The transparent lid allows for dust-free storage of the tips. Universally compatible with different pipette models.

• Dimensions (W x H x D): 244 x 246 x 165 mm

Accessories Single-channel pipettes Accessories Eight-channel pipettes Accessories Twelve-channel pipettes Accessories Single-channel pipette starter sets Alternative Pipette stand

Holder for hygienic and easy accessible storage of glove boxes. Also suitable for laboratory wipes (7.695 251) and disposable bags (7.696 994, 7.697 000) in dispenser boxes.

• Stainless steel, electrolytically polished
• Wall mounting material included
• Depth of the brackets: 85 mm

LABSOLUTE® sample beakers with graduation made of PP are very well suited for the storage und transport of solid and liquid samples.

• Highly transparent, non-cytotoxic PP beaker with green HDPE cap
• Very stable design
• Leak-proof due to double threaded cap and silicone ring in the cap (250 ml and 500 ml)
• Ribbed edge on bottom and cap for good grip - even with gloves
• With graduation on two sides

Alternative Sample containers, PP

CHEMSOLUTE® Settling plates (90 mm) for air sampling of the environment (full compatibility with most commercially available air samplers) or for other types of environmental sampling (e.g. operator's fingers or gloves, swab samples).
These ready-to-use agar plates with a filling capacity of 30 ± 2 ml are available in different packages of 10 prepared plates each.

• Produced at cleanroom conditions
• Quality control according to Ph.Eur./ISO 11133
• Multi-packed articles for cleanrooms and isolators

Articles with lateral labelling display a Data Matrix Code (DMC) including information on:

• Name of the medium, batch, MHD, serial number of the plate.

Articles RT for storage at the workplace

• Storage at room temperature
• Long shelf life, 6-9 months

The ergo disposable, protective, nitrile gloves combine the comfort and "feel" of latex with the physical and chemical endurance of nitrile, with no risk of allergies. The ideal glove for all applications requiring high tactile sensation and protection against chemicals.

• Thin - very comfortable to wear
• Excellent tactile sensitivity - similar to latex
• Tried and tested quality product made of nitrile
• Excellent resistance to skin irritants in foodstuffs
• Specially formulated for a more resilient glove
• For single use in applications with an increased need for safety when handling chemicals
• Free from phthalates / softeners and allergenic latex proteins
• Powder-free
• Easy to wear and particularly skin-friendly through special finishing process
• Colour: Lavender Blue
• Suitable for areas subject to HACCP standards
• Cat. III. AQL 1.5

According to EN ISO 374-1:2016/Type B, EN ISO 374-5:2016, EN 420 Suitable for food handling.
You can find the appropriate compatibility list on www.llg-labware.com in the Downloads section.

Glove shape:	flat with rolled edge (ambidextrous)
Material:	nitrile
Colour:	lavender blue
Outside:	textured fingers
Inside:	powder-free halogenated
Size:	XS, S, M, L, XL
Thickness (measured in double layer):	0.12mm

Disposable protective glove in nitrile with enhanced comfort in use and greater chemical protection - the standard glove for the laboratory.

• For forearm protection, 300 mm length
• Very comfortable to wear
• Tried and tested quality product made of nitrile - excellent resistance to skin irritants in foodstuffs
• More resilience through special formulation
• For single use in applications with an increased need for safety when handling chemicals
• Free from phthalates/softeners and allergenic latex proteins
• Powder-free
• Easy to don and particularly skin-friendly through special finishing process
• Colour blue - suitable for areas subject to HACCP standards
• Cat. III. AQL 1.5.

According to EN ISO 374-1:2016/Type B, EN ISO 374-5:2016, EN 421, EN 420 Suitable for food handling.
You can find the appropriate compatibility list on www.llg-labware.com in the Downloads section.

Glove shape:	flat with rolled edge (ambidextrous)
Material:	nitrile
Colour:	blue
Outside:	textured
Inside:	powder-free halogenated
Size/total length:	S, M, L, XL / med. 300mm
Thickness (measured in double layer):	0.16mm

Disposable protective glove in nitrile with enhanced comfort in use and greater chemical protection - the standard glove for the laboratory.

• Comfortable to wear
• Good tactile sensitivity
• Tried and tested quality product made of nitrile - excellent resistance to skin irritants in foodstuffs
• More resilience through special formulation
• For single use in applications with an increased need for safety when handling chemicals
• Free from phthalates/softeners and allergenic latex proteins
• Easy to don and particularly skin-friendly through special finishing process
• Colour blue - suitable for areas subject to HACCP standards
• Cat. III.

According to EN ISO 374-1:2016/Type B, EN ISO 374-5:2016, EN 421, EN 420 Suitable for food handling.
You can find the appropriate compatibility list on www.llg-labware.com in the Downloads section.

Glove shape:	flat with rolled edge (ambidextrous)
Material:	nitrile
Colour:	blue
Outside:	textured
Inside:	powder-free halogenated
Size/total length:	S, M, L, XL / med. 240mm
Thickness (measured in double layer):	0.16mm

Disposable, nitrile, heavy-walled, protective glove offering an enhanced resistance time against many chemicals. A protective glove for applications with higher safety requirements, but providing greater comfort in use than traditional chemical protective gloves.

• Very sturdy - higher material thickness
• Tried and tested quality product made of nitrile - excellent resistance to skin irritants in foodstuffs
• More resilience through special formulation
• For single use in applications with an increased need for safety when handling chemicals
• Free from phthalates/softeners and allergenic latex proteins
• Powder-Free
• Easy to don and particularly skin-friendly through special finishing process
• Colour blue - suitable for areas subject to HACCP standards

Cat. III. AQL 1.5.


According to EN ISO 374-1:2016/Type B, EN ISO 374-5:2016, EN 421, EN 420 Suitable for food handling.
You can find the appropriate compatibility list on www.llg-labware.com in the Downloads section.

Glove shape:	flat with rolled edge (ambidextrous)
Material:	nitrile
Colour:	blue
Outside:	textured
Inside:	powder-free halogenated
Size/total length:	S, M, L, XL / med. 240mm
Thickness (measured in double layer):	0.22mm

Available with fixed or adjustable volume. Ergonomic shape for a very comfortable handling
The rounded shape and the unique soft grip of the LLG pipette ensures a safe and comfortable handling. A minimal effort is required for pipetting so that the risk of repetitive strain injuries (RSI) is reduced.

Maximum Precision and Accuracy
Thermal insulation of the internal components, using the innovative soft grip, improves the accuracy.

Universal Blow-out System
The two-step plunger operation allows reverse pipetting. This also facilitates last drop dispensing by soft plunger movements. High accuracy and precision are guaranteed.

Colour-coded push-button for quick operation
The colour code enables a quick choice of the right pipette depending of the volume to be pipetted (see corresponding column in the table below).

Easy Maintenance and Adjustment
The volume setting is easy and precise, using the push-button, even when wearing gloves. Maintenance and adjustment take only a few minutes with just one tool. (Included in delivery)

Contamination-free Pipetting
The pipette is fully autoclavable, ideal for applications where sterility is important.

Satisfaction Guaranteed
Each pipette is individually tested and calibrated twice, conforming to EN ISO 8655 and DIN 12600 Standards. A certificate is included.

Made in Germany.
10000 µl pipette does not have a tip ejector.

Accessories LLG-Pipette stands for single channel microliter pipettes, PMMA Accessories LLG-Pipette tips economy 2.0, PP Alternative LLG single channel microliter pipettes, fix Alternative LLG-Digital single channel microliter pipettes, Packages, variable

Available with fixed or adjustable volume. Ergonomic shape for a very comfortable handling
The rounded shape and the unique soft grip of the LLG pipette ensures a safe and comfortable handling. A minimal effort is required for pipetting so that the risk of repetitive strain injuries (RSI) is reduced.

Maximum Precision and Accuracy
Thermal insulation of the internal components, using the innovative soft grip, improves the accuracy.

Universal Blow-out System
The two-step plunger operation allows reverse pipetting. This also facilitates last drop dispensing by soft plunger movements. High accuracy and precision are guaranteed.

Colour-coded push-button for quick operation
The colour code enables a quick choice of the right pipette depending of the volume to be pipetted (see corresponding column in the table below).

Easy Maintenance and Adjustment
The volume setting is easy and precise, using the push-button, even when wearing gloves. Maintenance and adjustment take only a few minutes with just one tool. (Included in delivery)

Contamination-free Pipetting
The pipette is fully autoclavable, ideal for applications where sterility is important.

Satisfaction Guaranteed
Each pipette is individually tested and calibrated twice, conforming to EN ISO 8655 and DIN 12600 Standards. A certificate is included.

Made in Germany.

Alternative LLG single channel microliter pipettes, variable Alternative LLG-Digital single channel microliter pipettes, Packages, variable

With hinged lid. For storage of laboratory tools, e.g. laboratory goggles, gloves or other small items.
Wall mounting possible (mounting material included)

• for about 12 goggles

LLG-Univeral dispenser with hinged lid and removal opening. For clean storage of laboratory accessories, e.g. disposable hoods, overshoes or other small items. Wall mounting possible (mounting material included).

Ideal for liquid specimen collection, transportation and storage.

• Ideally suited for liquid histological samples
• Container made of non-cytotoxic polypropylene
• Very solid quality
• Top and bottom gripping assures easy opening and closing when wearing gloves
• Half-transparency containers
• With graduation
• With label
• Leak proof

For research and development only.

Alternative LLG-Transport tubes, PP, with screw cap

LLG glove dispensers are suitable for glove packs with the dimensions approx. 240 x 75 x 125 mm, with front insert or side slot. High-quality, sturdy design. Mounting material included.

The ideal glove for all applications which require a high tactile sensitivity.

• Skin-friendly
• Powder-free
• Excellent tactile sensitivity
• High durability due to special formulation
• Cat. III. AQL 1.5.
• Thiuram free, reduced risk of contact eczemas

According to EN ISO 374-1:2016/Type C, EN ISO 374-5:2016, EN 420 Suitable for food handling.
You can find the appropriate compatibility list on www.llg-labware.com in the Downloads section.

Glove shape:	flat with rolled edge, ambidextrous
Material:	natural latex
Colour:	natural white
Outside:	textured fingers
Inside:	powder free
Size / Length:	S, M, L, XL / med. 240 mm
Thickness (measured in double layer):	0.20 mm