The white, octagonal LABSOLUTE® stoppers are made of HDPE and comply with DIN 12254. They are the perfect complement to all laboratory glassware with a standard ground joint. The joint sizes 34/35, 45/40 and 60/46 are in addition to the standard.

Alternative Hollow glass stoppers, type C, borosilicate glass 3.3

The powder-free, lavender blue LABSOLUTE® disposable gloves Sensitive made of nitrile are flat with a rolled cuff and offer excellent elasticity and wearing comfort. A special after-treatment makes these LABSOLUTE® disposable gloves skin friendly and easy to put on. The gloves have textured finger tips.

The LABSOLUTE® nitrile gloves with an AQL value of 1.5 comply with the following standards and directives

- EN 420, EN ISO 374-1, -2, -4, -5 and EN 16523-1

• (EU) 2016/425 (PPE in accordance with CE category III for complex risks)
• 1935/2004 (can be used in direct contact with food)
• ASTM 1671 / ISO 16604 (viral penetration)

Further properties:

• Approved for the use within Hazard Analysis and Critical Control Points (HACCP) concepts
• Resistance against ethidium bromide (1 %) for more than 480 min (level 6)
• Delivered in handy dispenser boxes of 200 (XS, S, M, L) or 180 pieces (XL)
• Free from phthalates, softeners and allergenic latex proteins
• Storage life: 3 years
• Length: approx. 240 mm
• Thickness (double): finger min. 0.14 mm, palm min. 0.12 mm, cuff min. 0.10 mm
• Can be worn on the left or right hand

Accessories Holder for glove boxes, stainless steel Alternative Disposable gloves, nitrile Protective, powder-free Alternative Disposable gloves, latex, powder-free

The sporty safety spectacles from LABSOLUTE® comply with EN 166 and EN 170. They match even the strictest regulations in terms of occupational protection and safety. The lenses of all spectacle models are made of high-quality polycarbonate UV 2 - 1,2. Special coating of the crystal-clear lens guarantees a scratch-proof and permanent non-fogging viewing surface. Innovative technologies and ultra-modern materials also ensure an excellent fit, distortion-free vision and 100 % UV protection - for, quite simply, comfort of the highest order.

Ideal for spectacle wearers: LABSOLUTE® vision. These lightweight over spectacles are also impressive due to their reliable protection, unrestricted lateral view and user-friendly wearing comfort.

Lightweight over-spectacles for your safety

• Unrestricted lateral view
• Excellent comfort and secure grip thanks to soft plastic on the arm ends

LABSOLUTE® microscope slides made of soda-lime glass comply with DIN ISO 8037-1 and 8037-2. This means they are the ideal solution for excellent and reproducible microscopy results. The microscope slides, measuring approx. 76 x 26 mm, have a thickness of around 1 mm and are delivered pre-cleaned and ready for use. The 20 mm wide, coloured or colourless frosted area is at one end on one side.

Cut microscope slides are particularly economical and therefore represent an excellent alternative to the ground versions, for routine tasks. The corners and edges are 90° for all cut microscope slides.

Accessories Cover glasses, rectangular, thickness 1 (0.13 - 0.16 mm) Accessories Microscope slide folders, cardboard Accessories Microscope slide boxes, PS Accessories Staining jar acc. to Coplin Accessories Slide mailers Accessories Slide dispenser Alternative Microscope slides, ground edges Alternative Adhesion slides for tissue sections

LABSOLUTE® Pasteur pipettes guarantee a comfortable and safe handling of fluids. Due to the constant drop volume the transfer pipettes are perfectly suited to aliquot larger volumes of liquids. The soft suction ball and precisely finished tip guarantee pleasant, clean working.

• Made from transparent LDPE
• Suitable for food analyses
• Free of BSE

Alternative Pasteur pipettes, soda-lime glass

The LABSOLUTE® petri dishes are made of soda-lime glass and supplied in two parts. The inner diameter and the height refer to the bottom plate, the outer diameter refers to the upper plate. They are autoclavable at 121 °C.

Alternative Petri dishes, PS

The red LABSOLUTE® screw caps and pouring rings made of PBT are the perfect complement to all clear and amber laboratory glass bottles. Both the caps, delivered with a PTFE-coated silicone seal, as well as the pouring rings are temperature-resistant up to 200°C. Therefore it is possible to sterilize them with hot air at 180 °C. Evaporation of highly volatile substances is avoided by the additional seal.

Accessories Laboratory bottles, clear, with PBT screw caps Accessories Laboratory bottles, clear, with PP screw caps Accessories Laboratory bottles, amber, with PP screw caps Alternative Screw caps, PP Alternative Pouring rings, PP

The powder-free, blue LABSOLUTE® disposable gloves Protective made of nitrile with a rolled cuff are the best supplement to the LABSOLUTE® Sensitive gloves for a higher protection level.

The silicone-free gloves with an AQL value of 1.5 are textured on the outside and comply with the following standards and directives

• EN 420, EN 421, EN ISO 374-1, -2, -4, -5 and EN 16523-1
• (EU) 2016/425 (PPE in accordance with CE category III for complex risks)
• 1935/2004 (can be used in direct contact with food)
• ASTM 1671 / ISO 16604 (viral penetration)

Further properties:

• Approved for the use within Hazard Analysis and Critical Control Points (HACCP) concepts
• UV transmission less than 0.1 % at 360 nm
• Delivered in handy dispenser boxes of 100 (S, M, L) or 90 pieces (XL)
• Free from phthalates, softeners and allergenic latex proteins
• Storage life: 3 years
• Length: approx. 240 mm
• Thickness (double): finger min. 0.30 mm, palm min. 0.22 mm, cuff min. 0.20 mm
• Can be worn on the left or right hand

Accessories Holder for glove boxes, stainless steel Alternative Disposable gloves, latex, powder-free Alternative Disposable gloves, nitrile Sensitive, powder-free

The versatile LABSOLUTE® narrow-mouth bottles made of LDPE can be combined with different closure types. In combination with the screw caps the bottles are 100 % tight and therefore perfect for storing and transporting liquids. They can be used in direct contact with food according to the EU regulations 10/2011, 1282/2011, 1183/2012 and 1935/2004.

Accessories Screw caps for narrow-mouth bottles, LDPE Accessories Dropping caps for narrow-mouth bottles, LDPE

Crimp seals ND11 are made of aluminium. They are clear or lacquered in different colours and have a 5.5 mm hole. They are supplied with fitted septa made of a variety of materials.

These septa are temperature-resistant from -40 °C to 120 °C and ideal for multiple injections thanks to their excellent resealability properties.

Septa made of natural rubber / butyl / TEF combine the good physical properties of natural rubber (resealability) and the good chemical properties of butyl (analytical cleanliness).

Accessories Crimp neck vials and micro-vials ND11, wide opening Accessories Snap ring vials and micro-vials ND11, wide opening Accessories Snap ring vials and micro-vials ND11, PMP or PP Accessories Crimping tools Accessories Decapping tools Accessories Crimping tools Accessories Decapping tools Accessories Crimping tool, pneumatic, manual Alternative With RedRubber / PTFE septa Alternative With butyl / PTFE septa Alternative With silicone / PTFE septa Alternative With aluminium septa

The LABSOLUTE® dropping caps made of LDPE are perfectly adapted for the narrow-mouth bottles 7.696 161 to 7.696 165. The fine, long drip tip enables precise work. The red protection cap preserves the tip and the liquid inside the bottle.

Accessories Narrow-mouth bottles, natural, LDPE Alternative Screw caps for narrow-mouth bottles, LDPE

LABSOLUTE® microscope slides made of soda-lime glass comply with DIN ISO 8037-1 and 8037-2. This means they are the ideal solution for excellent and reproducible microscopy results. The microscope slides, measuring approx. 76 x 26 mm, have a thickness of around 1 mm and are delivered pre-cleaned and ready for use. The 20 mm wide, coloured or colourless frosted area is at one end on one side.

The ground version of the slides is used to avoid cutting injuries or glass breakages during automated processing. Microscope slides have corners with either 45° or 90°. The edges are 90° for all ground microscope slides.

Accessories Cover glasses, rectangular, thickness 1 (0.13 - 0.16 mm) Accessories Microscope slide folders, cardboard Accessories Microscope slide boxes, PS Accessories Staining jar acc. to Coplin Accessories Slide mailers Accessories Slide dispenser Alternative Microscope slides, cut edges Alternative Adhesion slides for tissue sections

The powder-free LABSOLUTE® disposable gloves nitrile GREEN are flat with a rolled cuff and offer excellent elasticity and wearing comfort. The gloves have textured finger tips.

They are extremly skin-friendly, because they are free from chlorine and natural rubber proteins. The gloves use less water, energy and carbon dioxide during the production process as similar disposable gloves making these gloves a more sustainable option.

The LABSOLUTE® nitrile gloves with an AQL value of 1.5 comply with the following standards and directives

- EN 420, EN ISO 374-1, -2, -4, -5 and EN 16523-1

• (EU) 2016/425 (PPE in accordance with CE category III for complex risks)
• 1935/2004 (can be used in direct contact with food)
• ASTM 1671 / ISO 16604 (viral penetration)

Further properties:

• Resistance against ethidium bromide (1 %) for more than 480 min (level 6)
• Delivered in handy dispenser boxes of 200 (S, M, L) or 180 pieces (XL)
• Free from phthalates, softeners and allergenic latex proteins
• Free from rubber accelerators
• Storage life: 3 years
• Length: approx. 240 mm
• Thickness (double): finger min. 0.14 mm, palm min. 0.12 mm, cuff min. 0.10 mm
• Easy to don thanks to a synthetic inner coating
• Can be worn on the left or right hand

Accessories Holder for glove boxes, stainless steel Alternative Disposable gloves, nitrile Protective, powder-free Alternative Disposable gloves, latex, powder-free Alternative Disposable gloves, nitrile Sensitive, powder-free

The LABSOLUTE® wooden sticks and cotton swabs are ideal for taking samples in the laboratory and for cleaning purposes.

• Wooden stick 2.2 x 150 mm
• Cotton wool head approx. 5 mm diameter
• Compact, firm cotton wool head

All LABSOLUTE® measuring and mixing cylinders made of borosilicate glass 3.3 comply with DIN EN ISO 4788. They are calibrated to "In" (20 °C) and have a solid hexagonal glass base for a secure stand.

With functional spout and batch number. A batch-specific certificate of conformity is available on request.

Alternative Measuring cylinders, low form, class B, amber graduation Alternative Measuring cylinders, high form, class B, PP Alternative Measuring cylinders, high form, class A, PMP Alternative Measuring cylinders, high form, class B, white graduation

The absorbent paper strips are made of qualitative filter paper. They are suited to absorb excess fluids such as staining solutions for microscope specimens.

LABSOLUTE® offers a complete assortment for your pipetting tasks - no matter whether packed in bags, within racks or as an efficient refill system: all pipette tips are part of a system in which the components can be exchanged. The pipette tips are made of pure PP and comply with EN ISO 8655. In combination with the LABSOLUTE® pipettes, they constitute the perfect pipetting unit. Thanks to their universal fit and the high-quality material, the tips guarantee a firm and absolutely tight hold on various pipette models. And all this with much less attachment and ejection forces. The fully automated production and packaging of the pipette tips under clean room conditions guarantee completely contamination-free working conditions with products which are certified free of DNase, RNase, human DNA and pyrogens - to ensure reproducible and consistent results.

• High quality standard
• Graduated tips: the volume is visible at first glance
• 200 and 1000 µl tips are available in yellow or blue, respectively
• Autoclavable

Our pipette tips boxes for comfortable and efficient pipetting:

• Simple-to-use closure for single-handed opening
• The transparent design provides a complete overview of the tips
• Coloured trays enable fast recognition of the volume
• Refill system: easy and fast removal and replacement of the trays
• Stackable boxes for space-saving and safe storage
• Autoclavable at 121 °C

The 0.1-10 XL / 20 µl tips (7.695 841) are compatible with 20 µl Eppendorf Reference®, Eppendorf Research® Plus and Brand Transferpette®.
Bevelled tips (7.695 842 and 7.695 843): due to the bevelled end the contact surface of the pipetted liquid is reduced and less residual liquid remains at the tip.
Item 7.695 856 is delivered in a useful folded box.

Accessories Pipette tips boxes Accessories Single-channel pipettes Accessories Single-channel pipette starter sets Accessories Eight-channel pipettes Accessories Twelve-channel pipettes Accessories Racks for 5 ml and 10 ml pipette tips Accessories Pipette stand with dual bins for pipette tips, acrylic Alternative Pipette tips without aerosol barrier in racks, non-sterile Alternative Pipette tips without aerosol barrier in racks, sterile

Short thread vials and micro-vials ND9 are available in clear and amber first hydrolytic class glass and can be used on almost all autosamplers. You can replace other 1.5 ml vial types like 11 mm crimp neck vials, 8-425 and 10-425 screw neck vials, which can help rationalize stocks.

The wide opening requires matching micro-inserts with 6 mm diameter.

Due to the technical geometry, the vails can be used on all common autosamplers, but preferentially on instruments made by Agilent, HTA, Shimadzu, Thermo Scientific, Varian and Waters.

Accessories Micro-inserts for vials with wide opening, glass Accessories Vial racks, acrylic Accessories Vial racks, PP Accessories ND8, ND9, ND10, ND11 - 81 positions Accessories With natural rubber / TEF septa Accessories With RedRubber / PTFE septa Accessories With pure PTFE septa Accessories With silicone / PTFE septa Accessories With silicone / PTFE septa, Ultrabond Accessories With silicone / PTFE septa, magnetic Accessories MS short thread screw seal ND9 Alternative Short thread vials and micro-vials ND9, SureStop Alternative Short thread vials and micro-vials ND9, PMP or PP Alternative Screw neck vials and micro-vials ND8, small opening Alternative Screw neck vials and micro-vials ND10, wide opening Alternative Crimp neck vials and micro-vials ND11, wide opening Alternative Snap ring vials and micro-vials ND11, wide opening Alternative Vase vials Alternative Vials with directly closable micro-insert

LABSOLUTE® measuring and griffin beakers are made of chemical-resistant, transparent PP and are therefore particularly lightweight. They feature a clearly legible printed scale and a functional spout and are approved for food use and autoclavable up to 121 °C. Production is compliant with ISO 7056.

• Smooth surface for quick and easy cleaning
• Excellent resistance to strong, concentrated acids and alkaline solutions/lyes as well as aliphatic alcohols
• Good resistance to ketones, aldehydes and aliphatic and aromatic hydrocarbons

Alternative Measuring beakers with open handle, PP Alternative Griffin beakers (Measuring beakers without handle), PP

All LABSOLUTE® clear and amber volumetric flasks with accuracy class A comply with the DIN EN ISO 1042 standard. They are made of high-quality borosilicate glass 3.3 and calibrated to "In" (20 °C). All volumetric flasks are supplied with suitable stoppers made of glass or PE. A batch-specific certificate of conformity can be supplied on request.

Accessories Stoppers, HDPE Accessories Hollow glass stoppers, type C, borosilicate glass 3.3 Alternative Volumetric flasks, class A, with PE stopper, blue graduation Alternative Volumetric flasks, amber, class A, with PE stopper, white graduation Alternative Volumetric flasks, trapezoidal, class A, with PE stopper, blue graduation

The CHEMSOLUTE® pH indicator strips enable fast and accurate pH value determination. The range offers suitable products for a wide variety of pH value intervals.

• High accuracy and easy legibility
• Stable carrier strips with coloured test fields
• Non-bleeding, no contamination of the medium
• 100 strips per pack

The LABSOLUTE® cover glasses made of highly resistant borosilicate glass 3.3 of the first hydrolytic class are the perfect addition to every microscopy system. They are guaranteed free of contamination, bubbles or smears and comply with DIN ISO 8255-1 and 8255-2. The cover glasses are supplied in especially handy and secure boxes.

Accessories Microscope slides, ground edges Accessories Microscope slides, cut edges Accessories Adhesion slides for tissue sections

Short thread screw seals ND9 are made of PP and are supplied with fitted septa made of a variety of materials. They have a 6 mm centre hole and are available in different colours. The screw caps are similar in shape to the crimp caps and are therefore also suitable for robotic handling.

These septa are temperature-resistant from -60 °C to 200 °C and have better purity than septa made of natural rubber, butyl or red rubber. However, they have less effective resealability properties and are therefore more suitable for single-injection applications. Septa with a double-sided PTFE coating show a very low particle formation during penetration.

Accessories Short thread vials and micro-vials ND9, wide opening Accessories Short thread vials and micro-vials ND9, SureStop Accessories Short thread vials and micro-vials ND9, PMP or PP Alternative With natural rubber / TEF septa Alternative With RedRubber / PTFE septa Alternative With pure PTFE septa Alternative With silicone / PTFE septa, Ultrabond Alternative With silicone / PTFE septa, magnetic Alternative MS short thread screw seal ND9

The sporty safety spectacles from LABSOLUTE® comply with EN 166 and EN 170. They match even the strictest regulations in terms of occupational protection and safety. The lenses of all spectacle models are made of high-quality polycarbonate UV 2 - 1,2. Special coating of the crystal-clear lens guarantees a scratch-proof and permanent non-fogging viewing surface. Innovative technologies and ultra-modern materials also ensure an excellent fit, distortion-free vision and 100 % UV protection - for, quite simply, comfort of the highest order.

Occupational safety and comfort of the highest order - and all for a weight of just 21 grams. LABSOLUTE® light combines innovative technology with ultra-modern materials to create sensationally lightweight safety spectacles.

Innovative concept for high levels of acceptance among users

• Extremely lightweight safety spectacles
• Sporty design
• Excellent comfort and secure grip thanks to a perfect fit and soft plastic on the arm ends

The LABSOLUTE® screw caps made of LDPE are perfectly adapted for the narrow-mouth bottles 7.696 161 to 7.696 165 and close them 100 % tight.

Accessories Narrow-mouth bottles, natural, LDPE Alternative Dropping caps for narrow-mouth bottles, LDPE

The powder-free, natural-coloured LABSOLUTE® disposable latex gloves made of natural rubber with a rolled cuff offer excellent elasticity and wearing comfort. The gloves with textured fingers can be used in a wide variety of areas such as in pharmaceutical and chemical laboratories or the food industry.

The LABSOLUTE® latex gloves with an AQL value of 1.5 comply with the following standards and directives

• EN 420, EN ISO 374-1, -2, -4, -5 and EN 16523-1
• (EU) 2016/425 (PPE in accordance with CE category III for complex risks)
• 1935/2004 (can be used in direct contact with food)
• ASTM 1671 / ISO 16604 (viral penetration)

Further properties:

• Delivered in handy dispenser boxes of 100 (S, M, L) or 90 pieces (XL)
• Free from phthalates and softeners
• Storage life: 3 years
• Length: approx. 240 mm
• Thickness (double): finger min. 0.24 mm, palm min. 0.20 mm, cuff min. 0.12 mm
• Easy to put on and off
• Skin-friendly
• Can be worn on the left or right hand

Accessories Holder for glove boxes, stainless steel Alternative Disposable gloves, nitrile Sensitive, powder-free Alternative Disposable gloves, nitrile Protective, powder-free

LABSOLUTE® measuring and griffin beakers are made of chemical-resistant, transparent PP and are therefore particularly lightweight. They feature a clearly legible printed scale and a functional spout and are approved for food use and autoclavable up to 121 °C. Production is compliant with ISO 7056.

• Smooth surface for quick and easy cleaning
• Excellent resistance to strong, concentrated acids and alkaline solutions/lyes as well as aliphatic alcohols
• Good resistance to ketones, aldehydes and aliphatic and aromatic hydrocarbons

The red LABSOLUTE® safety pipette fillers Universal, Standard and Flip, made of natural rubber are the perfect complement for the LABSOLUTE® graduated and volumetric pipettes as well as all other graduated, volumetric and serological pipettes.

Especially the version Flip with its integrated automatic valve and only two operating points is very easy to handle.

Accessories Graduated pipettes, class AS, type 3, amber graduation Accessories Volumetric pipettes, class AS, 1 mark, amber graduation

The LABSOLUTE® pouring rings made of PP are the perfect complement to all clear and amber laboratory glass bottles with GL32 or GL45 thread. Autoclavable at 121 °C.

Accessories Laboratory bottles, clear, with PBT screw caps Accessories Laboratory bottles, clear, with PP screw caps Accessories Laboratory bottles, amber, with PP screw caps Accessories Screw caps, PP Alternative Pouring rings and screw caps, PBT

All LABSOLUTE® clear and amber volumetric flasks with accuracy class A comply with the DIN EN ISO 1042 standard. They are made of high-quality borosilicate glass 3.3 and calibrated to "In" (20 °C). All volumetric flasks are supplied with suitable stoppers made of glass or PE. A batch-specific certificate of conformity can be supplied on request.

Accessories Stoppers, HDPE Accessories Hollow glass stoppers, type C, borosilicate glass 3.3 Alternative Volumetric flasks, class A, with hollow glass stopper, blue graduation Alternative Volumetric flasks, amber, class A, with PE stopper, white graduation Alternative Volumetric flasks, trapezoidal, class A, with PE stopper, blue graduation

CHEMSOLUTE® Universal pH-indicator paper is a cost-effective alternative for the rapid determination of the pH value and consists of high-quality filter papers impregnated with indicator solution.

• pH value determination in 1.0 pH steps
• With colour scale
• Roll (L x W): 5 m x 7 mm

Alternative pH indicator strips

LABSOLUTE® sponges are high quality and ideal for cleaning and removing stubborn dirt from sensitive surfaces.

• Household sponge in three different colours
• Cleaning sponge with strong scrubbing surface and handy grip groove

The LABSOLUTE® range offers you a practical selection of precise chronometers which provide functions geared towards the requirements of the laboratory sector.

The LABSOLUTE® basic timer is a handy, lightweight and functional timer with a simple design.

• Dimensions (W x H x D): 50 x 69 x 8 mm
• LR-54 battery included
• Countdown function
• Four-digit display up to 99 minutes, 59 seconds
• With magnet on the back
• With power switch on the back for longer battery life

LABSOLUTE® test tubes made of soda-lime glass are rimless with a wall thickness of 0.7 - 0.9 mm. Compared to the borosilicate tubes they are less resistant against temperature changes and aggressive chemicals.

Accessories Winged caps for test tubes, PE Accessories Racks for 15 ml centrifuge tubes, PA Accessories Universal racks for different tube sizes, PP Alternative Test tubes, beaded rim, borosilicate glass 4.9 Alternative Disposable test tubes, plastic

The LABSOLUTE® wipe roll is absorbent and tear-resistant. Two rolls of 50 tear-offs each, 20 x 26 cm, are packed in a shrink film.

• White
• Grammage: 2 x 18 g/m²
• Inner core Ø: 45 mm

The LABSOLUTE® screw caps with integrated lip seal made of PP are the perfect complement for all clear and amber laboratory glass bottles with GL32 or GL45 thread. There is no additional seal required. Autoclavable at 121 °C.

Accessories Laboratory bottles, clear, with PBT screw caps Accessories Laboratory bottles, clear, with PP screw caps Accessories Laboratory bottles, amber, with PP screw caps Accessories Pouring rings, PP Alternative Pouring rings and screw caps, PBT

LABSOLUTE® short-stem funnels are made of high-quality borosilicate glass 3.3. They can also be used to decant and filter hot liquids. LABSOLUTE® funnels with diameter from 35 - 150 mm fit to almost every application. All funnels are manufactured on the basis of ISO 4798.

Alternative Funnels, short-stem, PP Alternative Powder funnels, PP

LABSOLUTE® round bottom flasks made of high-quality borosilicate glass 3.3 comply with the valid standards. They are available in different volumes and have the common ground joint sizes. All LABSOLUTE® round bottom flasks are characterized by very good chemical and temperature resistance. Because of the round shape, the flasks are ideal for consistent heating of liquids. Due to the standard ground joints, the flasks can be easily combined with other glass labware such as condensers.

Comply with DIN EN ISO 4797.

Accessories Stoppers, HDPE Accessories Hollow glass stoppers, type C, borosilicate glass 3.3 Accessories Condensers acc. to Dimroth, PP olives, borosilicate glass 3.3 Accessories Condensers acc. to Dimroth, glass olives, borosilicate glass 3.3 Accessories Condensers acc. to Allihn, PP olives, borosilicate glass 3.3 Accessories Condensers acc. to Liebig, PP olives, borosilicate glass 3.3 Alternative Flat bottom flasks, with standard ground joint, borosilicate glass 3.3

With the autoclavable bags made of PP, you can dispose of your contaminated labware. Thanks to the strong PP film (50 µm) and an extra broad seam at the bottom, the bags are particularly tear-resistant. The bag size 200 x 300 mm is delivered for both versions in a handy dispenser box.

Autoclavable at 121 °C. For autoclaving, the bags must only be slightly closed. Highly transparent.

Accessories Holder for disposal bags Alternative Disposal bags, standard, PP

LABSOLUTE® offers a complete assortment for your pipetting tasks - no matter whether packed in bags, within racks or as an efficient refill system: all pipette tips are part of a system in which the components can be exchanged. The pipette tips are made of pure PP and comply with EN ISO 8655. In combination with the LABSOLUTE® pipettes, they constitute the perfect pipetting unit. Thanks to their universal fit and the high-quality material, the tips guarantee a firm and absolutely tight hold on various pipette models. And all this with much less attachment and ejection forces. The fully automated production and packaging of the pipette tips under clean room conditions guarantee completely contamination-free working conditions with products which are certified free of DNase, RNase, human DNA and pyrogens - to ensure reproducible and consistent results.

• High quality standard
• Graduated tips: the volume is visible at first glance
• 200 and 1000 µl tips are available in yellow or blue, respectively
• Autoclavable

Our pipette tips boxes for comfortable and efficient pipetting:

• Simple-to-use closure for single-handed opening
• The transparent design provides a complete overview of the tips
• Coloured trays enable fast recognition of the volume
• Refill system: easy and fast removal and replacement of the trays
• Stackable boxes for space-saving and safe storage
• Autoclavable at 121 °C

LABSOLUTE® filter tips offer dual protection! The fine-pored filter made of PE serves as a defence to protect the samples from aerosols and biomolecules. At the same time, the hydrophobic material prevents the pipette from contamination. Delivered in stackable and stable racks.

0.1-10 XL/20 µl tips (7.695 881) are compatible with 20 µl Eppendorf Reference®, Eppendorf Research® Plus and Brand Transferpette®.

Accessories Single-channel pipettes Accessories Single-channel pipette starter sets Accessories Eight-channel pipettes Accessories Twelve-channel pipettes Alternative Pipette tips without aerosol barrier in racks, sterile Alternative Pipette tips without aerosol barrier in racks, non-sterile

The LABSOLUTE® laboratory wipes made of non-chlorine bleached cellulose are especially low-lint and soft.

The holder is suitable for hygienic and easily accessible storage of the laboratory wipes. It is delivered including wall mounting material.

Accessories Holder for glove boxes, stainless steel

Short thread screw seals ND9 are made of PP and are supplied with fitted septa made of a variety of materials. They have a 6 mm centre hole and are available in different colours. The screw caps are similar in shape to the crimp caps and are therefore also suitable for robotic handling.

These septa are temperature-resistant from -40 °C to 110 °C. They are easier to penetrate and have lower particle formation than septa made of natural rubber.

Accessories Short thread vials and micro-vials ND9, wide opening Accessories Short thread vials and micro-vials ND9, SureStop Accessories Short thread vials and micro-vials ND9, PMP or PP Alternative With natural rubber / TEF septa Alternative With pure PTFE septa Alternative With silicone / PTFE septa Alternative With silicone / PTFE septa, Ultrabond Alternative With silicone / PTFE septa, magnetic Alternative MS short thread screw seal ND9

The LABSOLUTE® Skin Care 1 is a high-quality, easily absorbable, gently moisturising skincare cream containing natural oils and beeswax. The emulsion is silicone-free and is therefore also suitable for use within Hazard Analysis and Critical Control Points (HACCP) concepts. The product encourages skin regeneration and can also be used on the face.

For best effects, use regularly after washing your hands, on dry skin, or also while working in the laboratory or office. The cream is suitable for all skin types.

The LABSOLUTE® Erlenmeyer flasks with a durable volume scale are made of high-quality borosilicate glass 3.3 and are therefore extremely temperature-resistant up to 500 °C. The wide-neck and narrow-neck flasks, as well as the flasks with standard ground joint comply with the valid standards. The flasks are resistant to cold lyes/alkaline solutions and strong acids, with the exception of hydrofluoric acid and hot, concentrated phosphoric acid.

Comply with DIN EN ISO 4797. Without stopper. Compatible with all stoppers with standard ground joint made of glass or plastic.

Accessories Hollow glass stoppers, type C, borosilicate glass 3.3 Accessories Stoppers, HDPE Alternative Erlenmeyer flasks, narrow-neck, borosilicate glass 3.3 Alternative Erlenmeyer flasks, wide-neck, borosilicate glass 3.3

The LABSOLUTE® range offers you a practical selection of precise chronometers which provide functions geared towards the requirements of the laboratory sector.

The LABSOLUTE® dual timer is ideal for comparing different countdown or countup times. The elapsed time is indicated both audibly and visibly by the T1 and T2 buttons lighting up green and then red during the countdown. The timer is easy to operate and can be read without errors thanks to the large display and the clearly visible digits.

• Dimensions (W x H x D): 90 x 75 x 20 mm
• 2x AAA batteries included
• Large display with two-part display, each six-digit, up to 99 hours, 59 minutes, 59 seconds
• Audible alarm volume with three level settings
• Visual alarm
• Memory function
• Simple fastening with magnet, clip and stand

The LABSOLUTE® sample dishes made of high-grade aluminium are perfectly suited for moisture analysis.

The LABSOLUTE® disposable cuvettes for the VIS and UV range feature optimised photometric properties and high transparence thanks to modern manufacturing methods. Furthermore, you benefit from the fact that all cuvettes within one packing unit are sorted according to their numbered cavities of origin. Consequently, you receive technically identical cuvettes which prevent deviations in extinction coefficient values. Supplied in practical, reclosable styrofoam racks.

• Increased heat transfer thanks to optimized form and small wall thickness
• Recessed measuring fields: reduce risk of scratching by the cuvette holder
• Arrow marker points to transmission direction
• Path length: 10 mm
• Outer dimensions (W x H x D): 12.5 x 45 x 12.5 mm

Alternative Disposable cuvettes for the UV range

The sporty safety spectacles from LABSOLUTE® comply with EN 166 and EN 170. They match even the strictest regulations in terms of occupational protection and safety. The lenses of all spectacle models are made of high-quality polycarbonate UV 2 - 1,2. Special coating of the crystal-clear lens guarantees a scratch-proof and permanent non-fogging viewing surface. Innovative technologies and ultra-modern materials also ensure an excellent fit, distortion-free vision and 100 % UV protection - for, quite simply, comfort of the highest order.

Reliable protection with superb versatility: The LABSOLUTE® safety spectacles complus are well suited for perfect, lightning-fast adaptation to different or frequently changing users.

Excellent user-friendliness and flexibility

• Simple adaptation thanks to the adjustable arm length and angle
• Low weight
• Excellent wearing comfort thanks to 2-component technology and soft rests on the nose, ears and forehead

The practical LABSOLUTE® wide-mouth bottles made of LDPE, HDPE or PP are particularly easy to fill and clean due to their wide opening. With 100 % tightly closing screw lids made of PP, they are ideal for shipping and storing liquid, powdery and paste-like samples.

Alternative Wide-mouth bottles, natural, HDPE Alternative Wide-mouth bottles, amber, HDPE Alternative Wide-mouth bottles, natural, PP Alternative Narrow-mouth bottles, natural, LDPE

LABSOLUTE® laboratory bottles are made of high-quality borosilicate glass 3.3 and are therefore extremely temperature-resistant up to 500 °C. They comply with EN ISO standard 4796-1. The bottles have a retrace code, a durable volume scale as well as a GL45 thread (GL32 thread for 50 ml bottles). The bottles as well as the closures are resistant against a wide range of chemicals.

With blue pouring rings and screw caps made of PP with integrated lip seal. Autoclavable at 121 °C. The transparent coating leads to a higher resistance of the bottles against strikes and shocks, and prevents leaking in case of bottle breaking.