The Millex® Syringe Filter has been specially manufactured for sterilization or clarification of biological solutions. To increase throughput and flow rate, the filter has a larger filtration surface. This also reduces the pressure required to emtpy the syringe. The filters are provided with a quality certification because they are manufactured under a controlled environment and an automated process.

If you want to have free chlorine, large particles and organic compounds removed from your tap water, use the Progard® pre-treatment packs. The reverse osmosis membrane (RO) is protected from chlorine oxidation, mineral scaling and organic pollution.

Features & Benefits:

• Ensures optimization of system life and performance

• Depth filtration for particle removal

Filter handling for MF method testing has been revolutionized by the EZ-Pak membranes and dispensers. They combine the advantages of ready-to-use, sterile and individually packaged membranes.

MF-Millipore™ Membranes have a biologically inert mixture of cellulose acetate and cellulose nitrate. The MF-Millipore™ filters without Triton® surfactant have a lower water extractable content compared to the standard MF-Millipore™ filters and contain a minimal amount of wetting agent.

Features & Benefits:

• Manifold filter for biological and environmental monitoring applications
• available in various pore sizes
• white or black coloured
• Freely selectable whether with or without grid surface
• Compatible with ethylene oxide, gamma irradiation and autoclave sterilization methods

The EZ-Pak® system with the Microfil® filter system contains sterile, ready-to-use funnels. These are in a convenient dispenser with a special filtration support to facilitate processing. Preparatory steps do not have to be observed, as they are not required here. The special "Push-Fit" funnel ensures perfect sealing without clamps.

Solutions of any macromolecules, simple and efficient, desalt and concentrate. Suitable for any centrifuge holding 1.5 ml tubes.

Features & Benefits:

• Even with diluted solutions the recovery is more than 95%.
• Reverse spin to maximize recovery even in the smallest sample
• Storage of filtrate or concentrated sample, very easy in standard microcentrifuge tubes
• concentration factor up to 100 x

The Millex® Syringe Filter has been specially manufactured for sterilization or clarification of biological solutions. To increase throughput and flow rate, the filter has a larger filtration surface. This also reduces the pressure required to emtpy the syringe. The filters are provided with a quality certification because they are manufactured under a controlled environment and an automated process.

Amicon® ultra centrifugal filters promote high sample recovery, even in diluted samples, through ultrafiltration and also provide fast sample processing. Particularly suitable for sensitive downstream applications as the centrifugal filters provide the fastest and most efficient concentration. The Ultracel-30 centrifugal filters have a NMWL (Nominal Molecular Weight Limit) of 30 kDa.

Features & Benefits:

• Prevents turning to dryness
• Provides a predictable concentration factor
• No calibration is necessary to run multiple samples in parallel
• Vertical membrane aligned with filtrate instead of vertical for loss constipation, less waste and faster filtration
• 25 to 80 times the concentration in one step
• Wide chemical compatibility, heat-sealed membrane and compatible with pH 1-9
• Maximum sample recovery as Ultracel® low-bund membrane > 90 % recovery
• Centrifuge your valuable sample with security in a robust, slim unit that prevents leakage

In contrast to nitrocellulose, Immobilon membranes have a number of advantages. An optimized coloring capacity, a broad solvent compatibility and a lower background make the membrane their solution. Immobilon membranes do not rupture or curl and can be cut without breaking. Reprobing is also possible many times. The Immobilon P membrane is particularly suitable for proteins with a molecular weight greater than 20 kDa.

Features & Advantages

• 0.45 µm Pore size
• Suitable for Western Blotting
• Millipore Rapid Immunodetection Protocol reduces detection time by up to 2 hours

Without any filtrate transfer, you can filter into a 50 ml centrifuge tube with the Steriflip® filter unit. Simply screw the filter unit onto your centrifuge tube, tilt it 180 degrees and apply vacuum. The second tube, which is attached to the filter unit, now contains your sterile filtrate.

For fast and uncomplicated sterile filtration of aqueous solutions in bottles with narrow or wide threads, the Steritop™ bottle top filter with large filter surface is ideal. Inside the funnel there is a small tab with which you can securely attach a separately available pre-filter during filtration. In order to provide optimum protection against contamination, the thread of the bottle cap is slightly set back.

• Fast flow rates and low protein binding
• Gamma sterilized
• Click-seal closure signals correct closure
• Quick Release: unscrewing the bottle with only a quarter turn
• Easier labeling due to frosted writing surface/bright cap color

Durapore® PVDF membranes are characterized by high throughput and high flow rate. To maximize recovery and minimize interaction with your sample, the membrane has very low protein binding.

Features & Benefits:

• Can be sterilized by ethylene oxide and gamma irradiation
• Available in different pore sizes

The Biopak® final filter is a disposable ultrafiltration module that is installed directly at the extraction point of Milli-Q water treatment systems. The filter produces pyrogen and nuclease-free ultrapure water for up to three months. The final filter consists of a white ABS housing and polysulfone hollow fibers.

Features & Advantages:

• Pyrogen-free water (< 0.001 EU/ml)
• RNase-free (< 1 pg/ml) and DNase-free water (< 5 pg/ml)
• Bacteria-free water (< 0.1 CFU/ml)
• Direct installation on all Type I water treatment systems from Merck Millipore
• Maintenance-free

The glass fiber filters are available with and without binder resins and can be sterilized by ethylene oxid, gamma irridation or in the autoclave.

Glass fiber filters without binding resin:

• Maintain their structural integrity to 500 °C without weight loss when heated
• For gravimetric analysis
• For the filtration of hot gases
• Type APFA/APFB/APFC/APFDAPFF/AP40

This cartridge is designed to produce high-resistance water from carefully selected cleaning media.

Features & Benefits:

• Guarantee of water quality
• Ensuring compliance with system specifications

185 nm mercury UV lamp for photo-oxidation of organic compounds. Can be used with Milli-Q systems built in 2001 or later.

Amicon® ultra centrifugal filters promote high sample recovery, even in diluted samples, through ultrafiltration and also provide fast sample processing. Particularly suitable for sensitive downstream applications as the centrifugal filters provide the fastest and most efficient concentration. The Ultracel-100 centrifugal filters have a NMWL (Nominal Molecular Weight Limit) of 100 kDa.

Features & Benefits:

• Prevents turning to dryness
• Provides a predictable concentration factor
• No calibration is necessary to run multiple samples in parallel
• Vertical membrane aligned with filtrate instead of vertical for loss constipation, less waste and faster filtration
• 25 to 80 times the concentration in one step
• Wide chemical compatibility, heat-sealed membrane and compatible with pH 1-9
• Maximum sample recovery as Ultracel® low-bund membrane > 90 % recovery
• Centrifuge your valuable sample with security in a robust, slim unit that prevents leakage

The Milliflex® Quantum high purification columns were developed to eliminate ions and traces of organic substances in ultrapure water.
To prevent operating errors and to ensure full traceability, there is the RFID identification (Radio Frequency Identification).

The Stericup® vacuum filtration system combines a filtrate collection bottle with a Steritop™ filter unit. The stability of the unit during filtration is improved by the conical shape of the collection bottle. This makes handling much easier. Even for use under laminar flow conditions the slim, compact shape is qualified. Stacking the closed bottles on top of each other is feasible, thanks to the slightly curved bottom.

Features & Advantages:

• Filtration and storage from 150 ml to 1000 ml possible

High sample recovery by ultrafiltration, even in diluted samples, and fast sample processing are offered by Amicon® ultra-centrifugal filters. The centrifugal filters, for fastest and most efficient concentrations, are specially designed for sensitive downstream applications. The Ultracel-10 centrifugal filters have a NMWL (Nominal Molecular Weight Limit) of 10 kDa.

Features & Benefits:

• Prevents rotation to dryness
• Providing a predictable concentration factor
• No calibration necessary if several samples are to be run in parallel
• Vertical membrane, aligned with filtrate
• Less clogging, faster filtration and less waste

• Robust, slim unit that prevents leakage

MF-Millipore™ Membranes have a biologically inert mixture of cellulose acetate and cellulose nitrate. The MF-Millipore™ filters without Triton® surfactant have a lower water extractable content compared to the standard MF-Millipore™ filters and contain a minimal amount of wetting agent.

Features & Benefits:

• Manifold filter for biological and environmental monitoring applications
• available in various pore sizes
• white or black coloured
• Freely selectable whether with or without grid surface
• Compatible with ethylene oxide, gamma irradiation and autoclave sterilization methods

SynergyPak® cleaning cartridges contain a special combination of cleaning media to remove traces of contaminants affecting specific applications. The material of which the cartridges are made has been carefully selected to produce pure or high purity water.
'

The filter provides effective protection against airborne contaminants. For Elix® water stored in 30/60/100 PE storage tank.

For protein extraction, protein purification, sample preparation.

• 50 x to 200 x sample concentration
• Compatible with swing-out rotors
• Deadstop prevents spinning to dryness

The Millex® Syringe Filter has been specially manufactured for sterilization or clarification of biological solutions. To increase throughput and flow rate, the filter has a larger filtration surface. This also reduces the pressure required to emtpy the syringe. The filters are provided with a quality certification because they are manufactured under a controlled environment and an automated process.