The ergo disposable, protective, nitrile gloves combine the comfort and "feel" of latex with the physical and chemical endurance of nitrile, with no risk of allergies. The ideal glove for all applications requiring high tactile sensation and protection against chemicals.

• Thin - very comfortable to wear
• Excellent tactile sensitivity - similar to latex
• Tried and tested quality product made of nitrile
• Excellent resistance to skin irritants in foodstuffs
• Specially formulated for a more resilient glove
• For single use in applications with an increased need for safety when handling chemicals
• Free from phthalates / softeners and allergenic latex proteins
• Powder-free
• Easy to wear and particularly skin-friendly through special finishing process
• Colour: Lavender Blue
• Suitable for areas subject to HACCP standards
• Cat. III. AQL 1.5

According to EN ISO 374-1:2016/Type B, EN ISO 374-5:2016, EN 420 Suitable for food handling.
You can find the appropriate compatibility list on www.llg-labware.com in the Downloads section.

Glove shape:	flat with rolled edge (ambidextrous)
Material:	nitrile
Colour:	lavender blue
Outside:	textured fingers
Inside:	powder-free halogenated
Size:	XS, S, M, L, XL
Thickness (measured in double layer):	0.12mm

Disposable, nitrile, heavy-walled, protective glove offering an enhanced resistance time against many chemicals. A protective glove for applications with higher safety requirements, but providing greater comfort in use than traditional chemical protective gloves.

• Very sturdy - higher material thickness
• Tried and tested quality product made of nitrile - excellent resistance to skin irritants in foodstuffs
• More resilience through special formulation
• For single use in applications with an increased need for safety when handling chemicals
• Free from phthalates/softeners and allergenic latex proteins
• Powder-Free
• Easy to don and particularly skin-friendly through special finishing process
• Colour blue - suitable for areas subject to HACCP standards

Cat. III. AQL 1.5.


According to EN ISO 374-1:2016/Type B, EN ISO 374-5:2016, EN 421, EN 420 Suitable for food handling.
You can find the appropriate compatibility list on www.llg-labware.com in the Downloads section.

Glove shape:	flat with rolled edge (ambidextrous)
Material:	nitrile
Colour:	blue
Outside:	textured
Inside:	powder-free halogenated
Size/total length:	S, M, L, XL / med. 240mm
Thickness (measured in double layer):	0.22mm

Twist-off jar, with wide-neck. Suitable for storing or transporting liquids and coarse solids. The large opening facilitates cleaning and filling of the clear glass.

Please order caps separately.

Accessories Caps, metal, for LLG-Wide-Neck jars

Biologically inert and resistant to dilute and weak acids, aqueous solutions, alcohols, and bases. Temperature range from -10 to 70 °C. Can be used with microwave moisture analysers. Boats are shallow with a wide, flat bottom to resist tipping. Rounded corners simplify transfer.

For research and development only.

Alternative LLG-Weighing boats, PS, diamond, antistatic Alternative  Alternative LLG-Hexagonal weighing boats, PS, antistatic

Suitable for applications in the cultivation of bacteria, yeasts and fungi, as well as cell cultures. Hydrolytic resistance: class HGB 3 according to ISO 719, type III according to USP.

Alternative LLG-Petri dishes, PS

Potassium chloride electrolyte for pH electrodes - Filling solution for reference electrolyte.
The safety data sheets of these products are available under www.llg-labware.com.

Cellulose, 100 % biodegradable and fully compostable autoclavable. Steristoppers^® have been proved as an excellent sealing for microbiological samples and tissue cultures in test tubes and Erlenmeyer flasks. They are in constant use in many European microbiological laboratories.

• Autoclavable
• Filters bacteria
• Sterilizable
• Air permeable

Alternative LLG-Cellulose stoppers

Made of stainless steel 304. For spherical ground joint connections. With set screw.

Circular, smooth and PTFE-coated. Packaging size: 10 pieces

An Ultra-flat inductive magnetic stirrer without heating with timer. The modern magnet coil technology consists only of non-moving parts and therefore guarantees a wear-free drive. For a better mixing of samples it is possible to change the direction of rotation every 30 seconds.

• Max. stirring quantity per stirring position 400 ml
• Timer (1 to 99 min, infinitely)
• 100 % wear- and maintenance-free inductive drive
• LED-display for an exact adjustment of the rotation speed
• Digital regulated rotation speed
• Alteration of the stirring direction
• High Protection class IP 65
• Stainless steel surface

Scope of supply: Magnetic stirrer, 4 stirring rods 25 x 8 mm

Specifications
Stirring positions: Distance between Stirring postions: Max. Stirring quantity (H2O):	4 95 mm 4 x 0.4 l = 1.6 l
Speed range:	15 ... 1200 min-1
Permissible ambient temperature:	5 ... 40 °C
Magnetic bar:	max. 25 mm
Display:	LED
Heating plate (W x D):	122 x 385 mm
Dimensions (W x D x H):	126 x 457 x 13.5 mm
Weight:	1.9 kg
Power supply:	100 ... 240 V, 50/60 Hz
IP code:	IP 65
Warranty:	3 years

Alternative Magnetic stirrer LLG-uniSTIRRER 2 Alternative Magnetic stirrer LLG-uniSTIRRER 1

Accessories LLG-Vacuum desiccator cabinets, polycarbonate, square form, "Heavy Duty"

Accessories Universal drying oven LLG-uniOVEN 42 and LLG-uniOVEN 110

LLG-uniVACUUSYS Vacuum Aspiration System with integrated vacuum pump and vacuum controller is ideally suited for aspirating liquids in Life Science applications, e.g. the removal of media from cell cultures, aspiration of supernatants after centrifugation, or the removal of wash solutions from Immuno assay plates. The set vacuum is automatically re-adjusted in case of deviations.

• Integrated vacuum pump with vacuum control
• Easy to use
• Self-closing connectors for quick installation and prevention of liquid or aerosol escape
• Liquid level sensor, prevents liquid overflow
• Autoclavable waste collection bottle and nozzle

Please order compatible 4l replacement bottle with 7.048 064.

Scope of supply: Vacuum Aspiration System with integrated vacuum pump, 4 liter waste collection bottle, single channel needles and 8-channel needle aspirator handles, single channel and 8-channel adaptor for 200 µl pipette tips, single channel adaptor for 1000 µl pipette, tubing and quick-connectors

Specifications
Vacuum range:	300 ... 600 mbar (adjustable)
Aspiration rate:	1 ... 15 ml/s
Noise emission:	<50 dB(A)
Dimensions (W x D x H):	180 x 320 x 530 mm
Weight:	3.4 kg
Power supply:	100 ... 240 V, 50/60 Hz
Warranty:	3 years

Accessories Accessories for Aspirator LLG-uniVACUUSYS

White. Twist-off screw cap for LLG-Wide-neck jars

Analogue disc rotator for gentle and effective sample mixing. Suitable for all biological samples. With easily interchangeable clamps that allow a quick cleaning of the rotator.
For a maximum of 48 x 1.5 ml, 16 x 5 or 15 ml, 8 x 50 ml tubes. Also for parallel use of different sizes, can be equipped individually.

• Compact design
• Housing easy to clean
• Non-slip, adjustable screw feet
• Additional clamps on request

Scope of supply: Disc rotator incl. 12 clamps each for 2 ml, 15 ml and 50 ml tubes

Specifications
Type of movement: Speed:	rotating 0 ... 80 min -1
Rotation angle:	360°
Permissible shaking weight (incl. attachment):	2 kg
Permissible relative moisture: Permissible ambient temperature:	80 % 5 ... 40 °C
Motor rating input/output:	20 W
Dimensions (W x D x H):	220 x 300 x 310 mm
Power supply:	100 ... 240 V, 50/60 Hz
IP code:	IP 21
Warranty:	3 years

Accessories Accessories for Overhead mixer LLG-uniROTATOR 2 / LLG-uniLOOPMIX 2 Alternative Overhead mixer LLG-uniROTATOR 2

Viscose fleece for LLG-Dispenser bucket Wiper Bowl® Safe & Clean.

The fine perforated structure of Multitex^® cleaning tissues ensures an even distribution of the surface disinfectant. These tissues are also ideally suited to the cleaning of grossly soiled surfaces. Easy handling thanks to tear-off perforation. After cleaning the lid can be closed and the tissues stay moistured for more than 30 days ensuring a constant cleaning and disinfection performance.

• fine
• tear-resistant
• absorbent
• lint free

Accessories Dispenser system Wiper Bowl® Safe & Clean for cleaning tissues

The economical "building block solution" for thorough disinfection and cleaning of sensitive areas in the medical and foodstuff industries. Can be filled with all commercial disinfectant and cleaning agents.

• Empty
• For 1 roll Multitex^® DR
• Made of plastic
• Resealable and reusable
• Dimensions: approx. 21 x 21 cm (H x ø)

For the rapid and safe removal of ethidium bromide from gel-staining solutions. Contains an activated carbon matrix, which quickly and easily removes >99 % of ethidium bromide. Each device can decontaminate up to 10 litres of gel-staining solution. After filtration, the decontaminated solution can be safely poured down the laboratory drain. The extractor funnel device fits most standard laboratory flasks and bottles (33 to 45 mm necks), and the unit includes a cap for storage between uses. Pack of 2

Accessories

Cap-disk with star-shaped insert. For colour-coding of cryotubes and quick identification of the samples.

Accessories LLG-PP Short Thread Seals ND9, ready assembled Accessories LLG-Septa for Thread Screw Caps ND9 Accessories LLG-PP UltraBond Short Thread Seals ND9 Accessories LLG-Storage Boxes, PP Alternative LLG-2in1 KITs with Short Thread Vials ND9 (wide opening)

Glazed. According to DIN 12904. Temperature resistant up to 900 °C.

Accessories LLG-Aluminium Crimp Seals ND11, ready assembled Accessories LLG-Septa for Crimp Caps ND11 Accessories LLG-Storage Boxes, PP Accessories Stainless Steel Cleanroom Crimping Tools

Accessories LLG-Aluminium Crimp Seals ND13, ready assembled and empty Crimp Caps ND13 Accessories Stainless Steel Cleanroom Crimping Tools

For cryoboxes 133 x 133mm. With compartment heights and formats as indicated. Other sizes available on request.

Alternative LLG-Partition inserts for Cryoboxes, 136 x 136 Alternative

Natural, translucent. Thick-walled. Ideal for taking, storing and transporting samples of liquids, pastes and granulated products.
Ideal for liquids, pastes and granulates.

Available with fixed or adjustable volume. Ergonomic shape for a very comfortable handling
The rounded shape and the unique soft grip of the LLG pipette ensures a safe and comfortable handling. A minimal effort is required for pipetting so that the risk of repetitive strain injuries (RSI) is reduced.

Maximum Precision and Accuracy
Thermal insulation of the internal components, using the innovative soft grip, improves the accuracy.

Universal Blow-out System
The two-step plunger operation allows reverse pipetting. This also facilitates last drop dispensing by soft plunger movements. High accuracy and precision are guaranteed.

Colour-coded push-button for quick operation
The colour code enables a quick choice of the right pipette depending of the volume to be pipetted (see corresponding column in the table below).

Easy Maintenance and Adjustment
The volume setting is easy and precise, using the push-button, even when wearing gloves. Maintenance and adjustment take only a few minutes with just one tool. (Included in delivery)

Contamination-free Pipetting
The pipette is fully autoclavable, ideal for applications where sterility is important.

Satisfaction Guaranteed
Each pipette is individually tested and calibrated twice, conforming to EN ISO 8655 and DIN 12600 Standards. A certificate is included.

Made in Germany.

Alternative LLG single channel microliter pipettes, variable Alternative LLG-Digital single channel microliter pipettes, Packages, variable

Available with fixed or adjustable volume. Ergonomic shape for a very comfortable handling
The rounded shape and the unique soft grip of the LLG pipette ensures a safe and comfortable handling. A minimal effort is required for pipetting so that the risk of repetitive strain injuries (RSI) is reduced.

Maximum Precision and Accuracy
Thermal insulation of the internal components, using the innovative soft grip, improves the accuracy.

Universal Blow-out System
The two-step plunger operation allows reverse pipetting. This also facilitates last drop dispensing by soft plunger movements. High accuracy and precision are guaranteed.

Colour-coded push-button for quick operation
The colour code enables a quick choice of the right pipette depending of the volume to be pipetted (see corresponding column in the table below).

Easy Maintenance and Adjustment
The volume setting is easy and precise, using the push-button, even when wearing gloves. Maintenance and adjustment take only a few minutes with just one tool. (Included in delivery)

Contamination-free Pipetting
The pipette is fully autoclavable, ideal for applications where sterility is important.

Satisfaction Guaranteed
Each pipette is individually tested and calibrated twice, conforming to EN ISO 8655 and DIN 12600 Standards. A certificate is included.

Made in Germany.
10000 µl pipette does not have a tip ejector.

Accessories LLG-Pipette stands for single channel microliter pipettes, PMMA Accessories LLG-Pipette tips economy 2.0, PP Alternative LLG single channel microliter pipettes, fix Alternative LLG-Digital single channel microliter pipettes, Packages, variable

Manufactured from high quality PTFE with excellent resistance to all chemicals. Manufactured from molded, pure PTFE with a smooth internal finish. Flat base enables a flat contact to the surface for effective heat transfer. PTFE beakers have excellent resistance to chemicals and temperature stability from -200°C to +260°C.

2in1 KITs contain 100 vials (1.5 ml) and 100 closures in an orange PP-Box. As both components are always required at the same time, 2in1 KITs are a convenient way to obtain and store all required items for analysis. All advantages of the individual components (cleanroom packaging of the vials, recloseability of the packaging, etc.) remain unchanged.

Any other combination of vial and seal as a 2in1 KIT available.

Made of Heavy-duty Polypropylene. Designed to hold 1.5 to 2.0 ml microtubes (5 x 16 arrays) in a temperature range from -80 °C to 121 °C. Molded numbers on the surface for easy samples identification. Suitable for autoclaving at 121 °C.

For research and development only.

• Clear well bottom for sample visibility, with V-Bottom
• Compatible with thermocyclers of all leading brands
• Consistent wall thickness for uniform heat transfer
• Holes in the skirt for easy handling
• Virgin polypropylene, certified RNase-, DNase- and Endotoxin-free

For labelling and colour coding of laboratory vessels and utensils. Strong and durable. Water resistant. Can withstand temperatures ranging from -23 °C to 121 °C. The tapes are easy to write-on and leave no residue when removed. Rolls of 12.7 m with an inner diameter of 25 mm.

An easy and comfortable handling is ensured by the ergonomically shaped,grip. The break-off device is integrated into the grip section of the ABS plastic casing. Comes with a metal blade guide and auto-lock system. Both cutters will be delivered on blister cards including 2 spare cutting blades.

Accessories LLG-Replacement blades for LLG-All-round Cutter

Accessories LLG-Septa for Crimp Caps ND11