According to ISO 9002.DOT39 and EN12205.
Control valve not included, please order separately.

In many fields, such as mining or industry, it is very important to detect even the smallest air flows, in order to quickly and reliably evaluate the possible diffusion of dangerous substances. With the air flow test tubes, the source, direction and speed of the air flow are visible immediately.

The Dräger Aerotest Alpha allows the quality of breathing air supplied by a compressor or compressed gas cylinder to be determined. Use of the test system performs a reliable check in accordance with the breathing air standard EN 12 021.

Dräger Aerotest Alpha
comprising of 1 pressure reducer, measuring device for 4 tubes, impactor adapter, coupling, barbed nipple, stopwatch, tube opener Dräger TO 7000, bubble test hose, pack of 5 sintered filters, instruction for use, transport case (black)

Dräger Aerotest Alpha, with Dräger Tubes :
Dräger Aerotest Alpha
+ box of 10 Dräger Oil Impactors,
+ box of 10 Dräger-Tubes carbon dioxide (CO₂) 100/a-P,
+ box of 10 Dräger-Tubes carbon monoxide (CO) 5/a-P,
+ box of 10 Dräger-Tubes water vapor (H₂O) 20/a-P

Using the Dräger activated charcoal tubes or silica gel tubes, hazardous substances in the air are collected using a suitable medium via adsorption or chemisorption. The sample is then analysed in the laboratory by means of various analytical methods such as gas chromatography (GC), high performance liquid chromatography (HPLC), UV-VIS photometry, or IR spectroscopy.

Fast measurement with one hand: The Dräger-Tube pump accuro^® allows you to use the established Dräger-Tubes^® to take measurements under extreme conditions. The easy-to-use Dräger-Tubes have already been calibrated and form a perfect unit with the Dräger-Tube pump.

Gas pump Dräger accuro^® set consisting of:
Dräger-Tubes^® pump accuro^®, ready bag, with tube opener and spare part set

The Dräger-Tubes^® measuring system is the safe method for measuring pollutants in the soil, water and air. More than 500 substances can be measured in varying concentrations. The long-established principle of Dräger-Tubes^® is still the same. A defined volume of gas/air must be pumped through the sampling tube. This can be achieved by using the Accuro^® gas pump. On contact with the substance under test the reagent system contained in the tube reacts and displays a colour. The strength of the concentration of the substance is shown by the length of the colour band displayed and can be read directly from the scale. The Dräger-Tubes^® sampling system provides accuracy, efficiency, quick and easy handling. Over 250 tubes are available on request for all substances and measuring fields. Further sampling devices, diffusion tubes for long-term measurements as well as sampling systems with activated carbon tubes, ORSA collector and TDS thermodesorption tubes are also available.

The Dräger-Tubes^® measuring system is the safe method for measuring pollutants in the soil, water and air. More than 500 substances can be measured in varying concentrations. The long-established principle of Dräger-Tubes^® is still the same. A defined volume of gas/air must be pumped through the sampling tube. This can be achieved by using the Accuro^® gas pump. On contact with the substance under test the reagent system contained in the tube reacts and displays a colour. The strength of the concentration of the substance is shown by the length of the colour band displayed and can be read directly from the scale. The Dräger-Tubes^® sampling system provides accuracy, efficiency, quick and easy handling. Over 250 tubes are available on request for all substances and measuring fields. Further sampling devices, diffusion tubes for long-term measurements as well as sampling systems with activated carbon tubes, ORSA collector and TDS thermodesorption tubes are also available.

The Dräger-Tubes^® measuring system is the safe method for measuring pollutants in the soil, water and air. More than 500 substances can be measured in varying concentrations. The long-established principle of Dräger-Tubes^® is still the same. A defined volume of gas/air must be pumped through the sampling tube. This can be achieved by using the Accuro^® gas pump. On contact with the substance under test the reagent system contained in the tube reacts and displays a colour. The strength of the concentration of the substance is shown by the length of the colour band displayed and can be read directly from the scale. The Dräger-Tubes^® sampling system provides accuracy, efficiency, quick and easy handling. Over 250 tubes are available on request for all substances and measuring fields. Further sampling devices, diffusion tubes for long-term measurements as well as sampling systems with activated carbon tubes, ORSA collector and TDS thermodesorption tubes are also available.

Versatile applications: P1 or P2 Pads can either be used alone (with plate and cap) or together in combination with gas filters (with cap). Plate and cap can be reused after use

This device is the innovative solution for the simultaneous and continuous detection of up to five gases. A combination of more than 25 sensors allows flexible solutions to individual monitoring tasks. The device can be equipped with three electrochemical, and two catalytic bead, infrared or photoionisation sensors. It is the ideal companion in a great number of applications where reliable monitoring of oxygen, toxic and combustible gases and vapors in ambient air is necessary.

Basic unit with rubber-boot, carrying strap, calibration adapter, water and dust filter. In order to get a fully operational unit, a power pack and up to 5 sensors have to be ordered. And, optionally, a built-in pump or a datalogger can be ordered.

CMS's electronic microchip-measurement system is currently one of the most accurate and reliable on-site detection systems for the measurement of gas concentrations. It comprises a substance specific microchip and an analyzer which takes measurements and displays the results on a digital screen. With one chip it is possible to take 10 different measurements of a known substance. Each measurement is carried out using the display menu operated by a single switch. Even new users will find its operation easy and trouble-free. 50 individual measurements can be stored in the integral data recorder at any one time.

Filter material CoolSAFE™ for protection against solid and liquid non-volatile particles. Odour versions with additional activated carbon layer against nuisance organic odours below the limit value.
All versions meet the conditions of the EU guideline 89/686/EWG and are permitted as particle filtering half masks, in accordance with EN 149:2001. They already meet the increased requirements of the coming revision of EN 149:2001 + A1:2009 (test of filter performance for aerosol exposure with 120 mg paraffin oil). Australian Standard AS/NZS 1716:2003 certified (SAI Global).

X-plore 6300 is the classic amongst full masks and fulfils the most stringent requirements in the areas of protection and comfort. The accompanying Dräger filter system offers you the ultimate protection against almost any harmful gaseous or vapour substance. The filters are optimized for respiratory resistance, size and performance and offer user safety with 100% quality testing.

Advantages:

• Double-sealed edges for an impervious, secure and comfortable fit
• Large field of vision with good all-round view
• Intelligent ventilation system for a non-misting visor
• Standard round thread filter attachment
• Universal filter system for almost all harmful substances
• Extensive accessories

Safe and easy bayonet connection. A unique two-point bayonet connector
attaches both filters to the mask using the same technique. Compact, low-profile design. The swept-back position of the filters guarantees a wide field of vision free from obstruction and ensures optimal fit for use under protective visors. Three sizes (S, M, L) ensure a perfect fit for every type of face. High grade materials provide extreme comfort when worn. Innovative, X-guided, strap system. Cross-over straps ensure an even weight distribution.
Full Face mask X-plore^® 3500: Large visor with a high level of chemical, thermal and mechanical resistance. "Drop Down" strap system. Allows mask removal without taking off a hard hat or faceshield: By simply opening the neck clips the respirator slides down from the face and sits close to the body, protected from dirt and grime.

The Combitox Nova (tested to EN 140) is the universal half mask for use with gas, particle and combination filters.

Advantages:

• Exact fit all shapes and sizes of face
• High-quality and non-allergenic materials used
• Simple to put on and remove, a pressure free and non-slip fit
• High security through sealing rim (similar to a full mask)
• Extensive range of filters for various uses

Ergonomically designed and equipped with innovative infrared sensor technology: The Dräger X-am® 5600 is a multi-gas detector for measuring up to six gases.

• Ideal for personal protection
• Robust
• Waterproof
• Device measures explosive, flammable, toxic gases and vapours as well as oxygen

• Dual IR Ex/ CO2
• XXS sensor O2
• XXS sensor CO/H2S