• With lip seal
• Temperature resistant to 140°C
• Only suitable for DURAN^® laboratory bottles

Red. DIN thread. With PTFE-coated silicone seal. Withstands temperatures up to 180°C. Autoclavable.

ISO 3819. With spout. From 25 ml with graduation. With easy-to-read scale and large labelling field for easy marking. In fired-on, highly durable white ceramic. Due to the uniform wall thickness, it is suitable for use as a heating vessel. Glass Type I / neutral as per USP, EP and JP. With retrace code (Batch Identification, for all) except 5 ml, 10 ml and 25 ml. Certificate available via the Internet. Autoclavable.

ISO 3819. With approximate graduations and spout. With easy-to-read scale and large labelling field for easy marking, in fired-on, highly durable white ceramic. Due to the uniformly wall thickness, it is suitable for use as a heating vessel. Glass Type I / neutral glass as per USP, EP and JP. With retrace code (Batch Identification). Certificate available via the Internet. Autoclavable.

With easy to read scale and large labelling field for easy marking, in fired-on, highly durable white ceramic. 10 ml and 25 ml bottles with specially shaped glass rim for better pouring (eliminating the need for an additional pouring ring).

• ISO 4796-1 compliant
• With Retrace code
• Neutral glass / Type I glass in compliance with USP/EP and JP
• Autoclavable

Easy to use due to square shape, highly stable, good stackability - proven DURAN^® properties give a space saving of 44 % in comparison with standard laboratory bottles (example applies to 100 ml bottles). With pouring ring and PP screw cap. Temperature (max.): 140 °C.

Advantages:

• Proven DURAN^® properties
• Excellent chemical resistance
• Low coefficient of expansion
• Autoclavable. Before autoclaving, unscrew closure and set lightly on the container. Do not tighten the closure
• Freezer limit: -40 °C. Only freeze the bottle by laying at an angle and if maximum ¾ full
• Ergonomic shape
• Very stable
• With Retrace code (Batch identification). Certificate available via the Internet
• Neutral glass / Type I glass acc. to USP/EP and JP

For screw caps made from PBT.

• Autoclavable
• Thermal resistance: max. 180°C

DIN ISO 1773. With approximate graduations and beaded rim. From 50 ml with Retrace Code (Batch Identification), certificate available via the Internet. Erlenmeyer flasks are well suited for mixing, because of their conical shape. Uniform wall thickness distribution makes these beakers ideal for heating applications. Glass Type I / neutral glass as per USP, EP and JP. Autoclavable.

Steriplan^®. Hydrolytical class 3.

DIN EN ISO 24450. With approximate graduations and beaded rim. With Retrace Code (Batch Identification), certificate available via the Internet. Uniformly wall thickness. Glass type I / neutral glass as per USP, EP and JP. Autoclavable.

• DIN 12338
• With spout
• Dishes with capacity of 100ml and above have labelling patch
• Glass Type I / neutral glass as per USP, EP and JP
• Autoclavable

Laboratory bottle with GLS 80^® wide neck (80 mm diameter), autoclavable and up to 500 °C temperature resistant. Neutral / Type 1 glass acc. to USP/EP. With Retrace code (Batch identification). Certificate available via the Internet. The wide neck is ideal for any application with powders or granulates, giving easier filling and emptying. With PP screw cap and pouring ring (autoclavable and temperature resistant up to 140 °C). With improved quick release cap which allows the bottle to be easily opened and closed with a minimum of turns.

With easy to read scale and large labelling field for easy marking, in fired-on, highly durable white ceramic. 10 ml and 25 ml bottles with specially shaped glass rim for better pouring (eliminating the need for an additional pouring ring).

• ISO 4796-1 compliant
• With Retrace code
• Neutral glass / Type I glass in compliance with USP/EP and JP
• Autoclavable

NMR tubes are available, according to requirement, in three accuracy classes. The correct tube can be selected depending on magnetic field and spin. The tubes are noteworthy for their close tolerances and accuracy, especially to their straightness, wall thickness and wall thickness distribution. Consequently, quick and accurate test results are achievable. With retrace code. Please order closing caps separately.
The disposable for economical use in fully automatic sample dispensers or where high throughputs are involved.

DURAN^®. With lid.Petri dishes are manufactured in a special production process which results in an even media dispersion and a uniform cell growth. Bottom and lid are absolute planar and free from bubbles and cords.
Glass Type I / neutral glass as per USP, EP and JP. Autoclavable. DIN 13132.

Autoclavable to 140 °C (steam).

For GL-screwthread caps. Overall diameter and wad thickness as outlined below. Thermical resistance: 130°C (steam) / 200°C (heat). Autoclavable.

Melting point 175 °C. Excellent chemical resistance. Rigid. Heat resistant up to 150 °C, sizes colour coded.

• For screw connector caps GL 14
• With silicone seal (VMQ)
• Temperature resistant up to max. 140°C
• Autoclavable

With approximate graduations and spout. Reinforced, sturdy rim and increased mechanical strength for heavy duty. Glass Type I / neutral glass as per USP, EP and JP. With retrace code (Batch Identification). Certificate available via the Internet. Autoclavable.

Silicone gasket (VMQ), PTFE coated. For screw caps made from PBT.

• Autoclavable
• Thermal resistance: max. 130°C (steam), 200°C (heat)

Red. With central hole (diameter outlined below). Temperature resistance to max. 180°C.

• ISO 4796-2
• With conical ground joint
• Glass stopper
• Glass Type I / neutral glass as per USP, EP and JP
• With Retrace code (Batch identification), certificate available via the Internet
• Autoclavable

DIN ISO 4798. With short stem. Glass Type I / neutral glass as per USP, EP and JP. Autoclavable.

Autoclavable. Rimless, with conical base. Maximum loading: 4000xg rcf.

NS 14/15. With interchangeable ground joint transparent pipette. Hydrolytical class 3. Complete with rubber teat.

• ISO 4796-2
• Standard ground joint neck
• With glass stopper
• Hydrolytic class 3

Wide-mouth. With short thread. Hydrolytical class 3.
Please order pouring ring separately.

• DIN 12341
• Flame-polished edges
• Autoclavable

• Conical shoulders
• With NS pennyhead stopper and interchangeable glass cap
• Glass type I / neutral glass as per USP, EP and JP
• Autoclavable

Thermoplastic polyester (PBT). Continuous control of flow rate in tubing with just one finger.

Fiolax^®. Round bottom with rim. Light-walled and resistant to rapid temperature changes and localised heating.

Highly transparent. The coating provides scratch, leak and splinter protection and is ideally suited to both the transport and storage of hazardous media or valuable samples. Service temperature limit of the PU plastic coating: -30 °C to 135 °C.

• With screw cap and pouring ring
• Graduated
• UV protection up to approx. 380 nm
• DIN thread
• DIN ISO 4796-1
• Suitable for microwaving
• USP compliant
• Autoclavable

Mechanically very resistant. Good thermal shock resistance. Glass Type I / neutral glass as per USP, EP and JP. Autoclavable.

For the storage and transport of photosensitive substances. With easy-to-read graduation and large labelling field for easy identification. UV protection up to approx. 500 nm wavelength. 10 ml and 25 ml with specially shaped glass rim for better pouring, thus an additional pouring ring made of plastic is not necessary.

• ISO 4796-1
• USP standard
• Retrace code
• Autoclavable

• With vulcanized PTFE sleeve
• For screwthread caps
• Thermical resistance: 130°C (steam), 200°C (heat)
• Autoclavable

The core moves freely and allows the vessel to be changed without twisting the securely attached tubing.

• For use with elastic, soft tubing of 6 - 9mm i.d. (Viton^®, Tygon^®, silicone)
• 2 x polypropylene, curved, hose connections on top and straight connections below
• Autoclavable
• Temperature resistant up to +140 °C
• Dishwasher-proof
• Optional filter top part for sterile pressure equalisation available

For attaching flexible vacuum tubing to filter flasks. Consists of straight PP tubing connection, PP tubulature made of silicone (VMQ) rubber seal. PP components can withstand temperatures up to 140°C for short periods without mechanical load.

For applications with very high temperatures. Easy to fit, dimensionally stable.

With PTFE coated silicone seal. Colourless (to avoid risk of leaching) and temperature resistant from -196 °C to 200 °C. Ideal for dry sterilization. USP/FDA standard conformity. DFM available on request. Autoclavable. With Retrace code (Batch Identification). Certificate available via the internet.

Aluminium. For the closure of culture tubes, bottles and flasks.

Laboratory bottles without pouring ring and without cap.

Autoclavable.

For safe transfer of liquid media within a closed and sterile system (evaporation is reduced).

• Screw closure GL 45 with two, three or four ports GL 14 thread
• Autoclavable
• Temperature restistant up to max. 140 °C
• Flexible modular system
• Sterile pressure equalisation is possible through use of a membrane filter
• Unused ports can be provided with a blind cap

With sintered glass filter disc at base, as outlined below.
Glass Type I / neutral glass as per USP, EP and JP. Autoclavable.

• With high thread
• Without closure
• With dust cap
• Without pouring ring
• Hydrolytical class 3

With short, wide stem.

Melting point 175 °C. Excellent chemical resistance. Rigid. Heat resistant up to 150 °C, sizes colour coded.

• To ISO 4796-2
• With ground joint neck
• With glass stopper
• Hydrolytic class 3

Colourless pouring ring TpCh260, height 4mm. Temperature resistant from -196°C to +260°C.