PP nonwoven 10 g/m², universal fit Ø 52 cm, with all-around elastic, latex-free

White PP nonwoven 30 g/m², universal size with shirt collar and elastic at the wrists, latex-free, without pocket, 4 push buttons

White PP non-woven 30 g/m², with hood and zipper, elastic band on the hood and on the wrists and ankles, latex-free

Digital mini incubator with cooling and heating function for cultivation of biological samples in small-volume vessels. With internal power outlet for positioning small shakers, mixers, or other devices in the inner chamber. Due to its small footprint, the LLG-uniINCU 20 cool is ideal for small laboratories and educational institutions.

• Good temperature stability of the set temperature (up to 15 °C below ambient temperature) in the inner chamber of the cooling incubator
• Large inner chamber with 22 l capacity
• Fast heating and homogeneous temperature
• With built-in calibration function of up to ±5 °C
• Temperature accuracy is ±0.5 °C (at 37 °C)
• Temperature uniformity is ±1.5 °C (at 37 °C)

ISO 3819. With approximate graduations and spout. With easy-to-read scale and large labelling field for easy marking, in fired-on, highly durable white ceramic. Due to the uniformly wall thickness, it is suitable for use as a heating vessel. Glass Type I / neutral glass as per USP, EP and JP. With retrace code (Batch Identification). Certificate available via the Internet. Autoclavable.

Easy to use due to square shape, highly stable, good stackability - proven DURAN^® properties give a space saving of 44 % in comparison with standard laboratory bottles (example applies to 100 ml bottles). With pouring ring and PP screw cap. Temperature (max.): 140 °C.

Advantages:

• Proven DURAN^® properties
• Excellent chemical resistance
• Low coefficient of expansion
• Autoclavable. Before autoclaving, unscrew closure and set lightly on the container. Do not tighten the closure
• Freezer limit: -40 °C. Only freeze the bottle by laying at an angle and if maximum ¾ full
• Ergonomic shape
• Very stable
• With Retrace code (Batch identification). Certificate available via the Internet
• Neutral glass / Type I glass acc. to USP/EP and JP

ISO 3819. With spout. From 25 ml with graduation. With easy-to-read scale and large labelling field for easy marking. In fired-on, highly durable white ceramic. Due to the uniform wall thickness, it is suitable for use as a heating vessel. Glass Type I / neutral as per USP, EP and JP. With retrace code (Batch Identification, for all) except 5 ml, 10 ml and 25 ml. Certificate available via the Internet. Autoclavable.

With easy to read scale and large labelling field for easy marking, in fired-on, highly durable white ceramic. 10 ml and 25 ml bottles with specially shaped glass rim for better pouring (eliminating the need for an additional pouring ring).

• ISO 4796-1 compliant
• With Retrace code
• Neutral glass / Type I glass in compliance with USP/EP and JP
• Autoclavable

Autoclavable to 140 °C (steam).

• With lip seal
• Temperature resistant to 140°C
• Only suitable for DURAN^® laboratory bottles

For screw caps made from PBT.

• Autoclavable
• Thermal resistance: max. 180°C

Red. DIN thread. With PTFE-coated silicone seal. Withstands temperatures up to 180°C. Autoclavable.

DIN EN ISO 24450. With approximate graduations and beaded rim. With Retrace Code (Batch Identification), certificate available via the Internet. Uniformly wall thickness. Glass type I / neutral glass as per USP, EP and JP. Autoclavable.

With easy to read scale and large labelling field for easy marking, in fired-on, highly durable white ceramic. 10 ml and 25 ml bottles with specially shaped glass rim for better pouring (eliminating the need for an additional pouring ring).

• ISO 4796-1 compliant
• With Retrace code
• Neutral glass / Type I glass in compliance with USP/EP and JP
• Autoclavable

DIN ISO 1773. With approximate graduations and beaded rim. From 50 ml with Retrace Code (Batch Identification), certificate available via the Internet. Erlenmeyer flasks are well suited for mixing, because of their conical shape. Uniform wall thickness distribution makes these beakers ideal for heating applications. Glass Type I / neutral glass as per USP, EP and JP. Autoclavable.

• DIN 12338
• With spout
• Dishes with capacity of 100ml and above have labelling patch
• Glass Type I / neutral glass as per USP, EP and JP
• Autoclavable

Laboratory bottle with GLS 80^® wide neck (80 mm diameter), autoclavable and up to 500 °C temperature resistant. Neutral / Type 1 glass acc. to USP/EP. With Retrace code (Batch identification). Certificate available via the Internet. The wide neck is ideal for any application with powders or granulates, giving easier filling and emptying. With PP screw cap and pouring ring (autoclavable and temperature resistant up to 140 °C). With improved quick release cap which allows the bottle to be easily opened and closed with a minimum of turns.

NMR tubes are available, according to requirement, in three accuracy classes. The correct tube can be selected depending on magnetic field and spin. The tubes are noteworthy for their close tolerances and accuracy, especially to their straightness, wall thickness and wall thickness distribution. Consequently, quick and accurate test results are achievable. With retrace code. Please order closing caps separately.
The disposable for economical use in fully automatic sample dispensers or where high throughputs are involved.

Red. With central hole (diameter outlined below). Temperature resistance to max. 180°C.

DURAN^®. With lid.Petri dishes are manufactured in a special production process which results in an even media dispersion and a uniform cell growth. Bottom and lid are absolute planar and free from bubbles and cords.
Glass Type I / neutral glass as per USP, EP and JP. Autoclavable. DIN 13132.

Steriplan^®. Hydrolytical class 3.

Melting point 175 °C. Excellent chemical resistance. Rigid. Heat resistant up to 150 °C, sizes colour coded.

• For screw connector caps GL 14
• With silicone seal (VMQ)
• Temperature resistant up to max. 140°C
• Autoclavable

NS 14/15. With interchangeable ground joint transparent pipette. Hydrolytical class 3. Complete with rubber teat.

DIN ISO 4798. With short stem. Glass Type I / neutral glass as per USP, EP and JP. Autoclavable.

With sintered glass filter disc at base, as outlined below.
Glass Type I / neutral glass as per USP, EP and JP. Autoclavable.

Autoclavable.

With approximate graduations and spout. Reinforced, sturdy rim and increased mechanical strength for heavy duty. Glass Type I / neutral glass as per USP, EP and JP. With retrace code (Batch Identification). Certificate available via the Internet. Autoclavable.

Silicone gasket (VMQ), PTFE coated. For screw caps made from PBT.

• Autoclavable
• Thermal resistance: max. 130°C (steam), 200°C (heat)

• ISO 4796-2
• Standard ground joint neck
• With glass stopper
• Hydrolytic class 3

For applications with very high temperatures. Easy to fit, dimensionally stable.

To DIN 58970 part 2. Glass Type I / neutral glass as per USP, EP and JP. Autoclavable.
Maximum loading: 4000xg rcf.

Wide-mouth. With short thread. Hydrolytical class 3.
Please order pouring ring separately.

• Conical shoulders
• With NS pennyhead stopper and interchangeable glass cap
• Glass type I / neutral glass as per USP, EP and JP
• Autoclavable

• DIN 12341
• Flame-polished edges
• Autoclavable

NMR tubes are available, according to requirement, in three accuracy classes. The correct tube can be selected depending on magnetic field and spin. The tubes are noteworthy for their close tolerances and accuracy, especially to their straightness, wall thickness and wall thickness distribution. Consequently, quick and accurate test results are achievable. With retrace code. Please order closing caps separately.
For professional use in industry and research in the medium and high resolution area of NMR spectroscopy.

Mechanically very resistant. Good thermal shock resistance. Glass Type I / neutral glass as per USP, EP and JP. Autoclavable.

Autoclavable. Rimless, with conical base. Maximum loading: 4000xg rcf.

Highly transparent. The coating provides scratch, leak and splinter protection and is ideally suited to both the transport and storage of hazardous media or valuable samples. Service temperature limit of the PU plastic coating: -30 °C to 135 °C.

• With screw cap and pouring ring
• Graduated
• UV protection up to approx. 380 nm
• DIN thread
• DIN ISO 4796-1
• Suitable for microwaving
• USP compliant
• Autoclavable

The core moves freely and allows the vessel to be changed without twisting the securely attached tubing.

• For use with elastic, soft tubing of 6 - 9mm i.d. (Viton^®, Tygon^®, silicone)
• 2 x polypropylene, curved, hose connections on top and straight connections below
• Autoclavable
• Temperature resistant up to +140 °C
• Dishwasher-proof
• Optional filter top part for sterile pressure equalisation available

For GL-screwthread caps. Overall diameter and wad thickness as outlined below. Thermical resistance: 130°C (steam) / 200°C (heat). Autoclavable.

Aluminium. For the closure of culture tubes, bottles and flasks.

• With high thread
• Without closure
• With dust cap
• Without pouring ring
• Hydrolytical class 3

Melting point 175 °C. Excellent chemical resistance. Rigid. Heat resistant up to 150 °C, sizes colour coded.

Laboratory bottles without pouring ring and without cap.

With PTFE coated silicone seal. Colourless (to avoid risk of leaching) and temperature resistant from -196 °C to 200 °C. Ideal for dry sterilization. USP/FDA standard conformity. DFM available on request. Autoclavable. With Retrace code (Batch Identification). Certificate available via the internet.

Thermoplastic polyester (PBT). Continuous control of flow rate in tubing with just one finger.

• With vulcanized PTFE sleeve
• For screwthread caps
• Thermical resistance: 130°C (steam), 200°C (heat)
• Autoclavable

For attaching flexible vacuum tubing to filter flasks. Consists of straight PP tubing connection, PP tubulature made of silicone (VMQ) rubber seal. PP components can withstand temperatures up to 140°C for short periods without mechanical load.

• DIN 12336
• Flat-bottom with spout
• Autoclavable