BIOSOLUTE® ready-to-use contact plates with a wide range of applications for detecting microbial colonization. BIOSOLUTE® contact plates feature an agar surface that is slightly convex and curved over the edge of the Petri dish. With a size of 55 mm, they come in a practical blister of 6 plates each and are thus individually packaged. The blisters are each double packed in a cellophane bag or - for use in cleanrooms - triple packed in two cellophane bags.

• Produced under cleanroom conditions
• Quality control according to ISO 11133
• Storable at room temperature
• Long shelf life

LABSOLUTE® wooden spatulas are suitable for various applications in the laboratory, pharmacy or industry, e.g. for mixing emulsions.

• untreated wood
• round edges

The blue LABSOLUTE® waste bags made from LDPE with a wall thickness of 35 µm are tear resistant, flexible and offer a wide range of applications. The red waste bags with a material thickness of 150 μm are ideal for medical practices, hospitals or laboratories to dispose hazardous waste. All LABSOLUTE® LDPE waste bags are made from 100 % recycled material.
The smaller waste bags with a volume of 30 and 60 l made from HDPE are perfect for small laboratory waste bins.

The powder-free, blue LABSOLUTE® disposable gloves Protective made of nitrile with a rolled cuff are the best supplement to the LABSOLUTE® Sensitive gloves for a higher protection level.

The silicone-free gloves with an AQL value of 1.5 are textured on the outside and comply with the following standards and directives

• EN 420, EN 421, EN ISO 374-1, -2, -4, -5 and EN 16523-1
• (EU) 2016/425 (PPE in accordance with CE category III for complex risks)
• 1935/2004 (can be used in direct contact with food)
• ASTM 1671 / ISO 16604 (viral penetration)

Further properties:

• Approved for the use within Hazard Analysis and Critical Control Points (HACCP) concepts
• UV transmission less than 0.1 % at 360 nm
• Delivered in handy dispenser boxes of 100 (S, M, L) or 90 pieces (XL)
• Free from phthalates, softeners and allergenic latex proteins
• Storage life: 3 years
• Length: approx. 240 mm
• Thickness (double): finger min. 0.30 mm, palm min. 0.22 mm, cuff min. 0.20 mm
• Can be worn on the left or right hand

Accessories Holder for glove boxes, stainless steel Alternative Disposable gloves, latex, powder-free Alternative Disposable gloves, nitrile Sensitive, powder-free

The sporty safety spectacles from LABSOLUTE® comply with EN 166 and EN 170. They match even the strictest regulations in terms of occupational protection and safety. The lenses of all spectacle models are made of high-quality polycarbonate UV 2 - 1,2. Special coating of the crystal-clear lens guarantees a scratch-proof and permanent non-fogging viewing surface. Innovative technologies and ultra-modern materials also ensure an excellent fit, distortion-free vision and 100 % UV protection - for, quite simply, comfort of the highest order.

Ideal for spectacle wearers: LABSOLUTE® vision. These lightweight over spectacles are also impressive due to their reliable protection, unrestricted lateral view and user-friendly wearing comfort.

Lightweight over-spectacles for your safety

• Unrestricted lateral view
• Excellent comfort and secure grip thanks to soft plastic on the arm ends

All LABSOLUTE® measuring and mixing cylinders made of borosilicate glass 3.3 comply with DIN EN ISO 4788. They are calibrated to "In" (20 °C) and have a solid hexagonal glass base for a secure stand.

With functional spout and batch number. A batch-specific certificate of conformity is available on request.

Alternative Measuring cylinders, low form, class B, amber graduation Alternative Measuring cylinders, high form, class B, PP Alternative Measuring cylinders, high form, class A, PMP Alternative Measuring cylinders, high form, class B, white graduation

LABSOLUTE® measuring and griffin beakers are made of chemical-resistant, transparent PP and are therefore particularly lightweight. They feature a clearly legible printed scale and a functional spout and are approved for food use and autoclavable up to 121 °C. Production is compliant with ISO 7056.

• Smooth surface for quick and easy cleaning
• Excellent resistance to strong, concentrated acids and alkaline solutions/lyes as well as aliphatic alcohols
• Good resistance to ketones, aldehydes and aliphatic and aromatic hydrocarbons

Alternative Measuring beakers with open handle, PP Alternative Griffin beakers (Measuring beakers without handle), PP

The LABSOLUTE® cover glasses made of highly resistant borosilicate glass 3.3 of the first hydrolytic class are the perfect addition to every microscopy system. They are guaranteed free of contamination, bubbles or smears and comply with DIN ISO 8255-1 and 8255-2. The cover glasses are supplied in especially handy and secure boxes.

Accessories Microscope slides, ground edges Accessories Microscope slides, cut edges Accessories Adhesion slides for tissue sections

LABSOLUTE® sponges are high quality and ideal for cleaning and removing stubborn dirt from sensitive surfaces.

• Household sponge in three different colours
• Cleaning sponge with strong scrubbing surface and handy grip groove

The LABSOLUTE® laboratory wipes made of non-chlorine bleached cellulose are especially low-lint and soft.

The holder is suitable for hygienic and easily accessible storage of the laboratory wipes. It is delivered including wall mounting material.

Accessories Holder for glove boxes, stainless steel

The LABSOLUTE® petri dishes are made of crystal-clear PS and offer high optical clarity. The dishes with three vents support gas exchange and are ideal for short incubation times. Dishes without vents are best suited for anaerobic and long-term work. The Petri dishes are prepared and packed under aseptic conditions. Sterilisation for the sterile dishes is done by beta rays.

• Perfectly stackable
• Heat-resistant from -40 - 70 °C

Packed in sub-units of 10 plates (Ø = 60 and 150 mm), 15 plates (Ø = 55 mm) or 20 plates (Ø = 90 mm).

Accessories Rack for Petri dishes, acrylic Accessories Disposable spatulas, L- and T-shaped, PS Accessories Disposable inoculation loops, sterile Alternative Petri dishes, soda-lime glass

LABSOLUTE® round bottom flasks made of high-quality borosilicate glass 3.3 comply with the valid standards. They are available in different volumes and have the common ground joint sizes. All LABSOLUTE® round bottom flasks are characterized by very good chemical and temperature resistance. Because of the round shape, the flasks are ideal for consistent heating of liquids. Due to the standard ground joints, the flasks can be easily combined with other glass labware such as condensers.

Comply with DIN EN ISO 4797.

Accessories Stoppers, HDPE Accessories Hollow glass stoppers, type C, borosilicate glass 3.3 Accessories Condensers acc. to Dimroth, PP olives, borosilicate glass 3.3 Accessories Condensers acc. to Dimroth, glass olives, borosilicate glass 3.3 Accessories Condensers acc. to Allihn, PP olives, borosilicate glass 3.3 Accessories Condensers acc. to Liebig, PP olives, borosilicate glass 3.3 Accessories Joint clips, for conical ground joints, POM Accessories Joint clips, for conical ground joints, stainless steel Alternative Flat bottom flasks, with standard ground joint, borosilicate glass 3.3

LABSOLUTE® microscope slides made of soda-lime glass comply with DIN ISO 8037-1 and 8037-2. This means they are the ideal solution for excellent and reproducible microscopy results. The microscope slides, measuring approx. 76 x 26 mm, have a thickness of around 1 mm and are delivered pre-cleaned and ready for use. The 20 mm wide, coloured or colourless frosted area is at one end on one side.

Adhesion slides ensure quicker flatness and better adhesion of the samples. The microscope slides with a white frosted area and ground edges are supplied in shrink-wrapped plastic boxes of 72 pieces. The angle of the edges and corners for both items is 90°.

Accessories Cover glasses, rectangular, thickness 1 (0.13 - 0.16 mm) Accessories Microscope slide folders, cardboard Accessories Microscope slide boxes, PS Accessories Staining jar acc. to Coplin Accessories Slide mailers Accessories Slide dispenser Alternative Microscope slides, ground edges Alternative Microscope slides, cut edges

CHEMSOLUTE® Universal pH-indicator paper is a cost-effective alternative for the rapid determination of the pH value and consists of high-quality filter papers impregnated with indicator solution.

• pH value determination in 1.0 pH steps
• With colour scale
• Roll (L x W): 5 m x 7 mm

Alternative pH indicator strips

The LABSOLUTE® sample dishes made of high-grade aluminium are perfectly suited for moisture analysis.

The ready-to-use buffer solutions from CHEMSOLUTE® are renowned for their quality and ease of use.

- Accuracy: ±0.02 pH units, reference temperature 20 °C

• Traceable to standard reference material of the National Institute of Standards and Technology (NIST)
• In PP bottles (500 ml & 1000 ml) or polytainers (5000 ml)

The LABSOLUTE® tubes have very good thermal, mechanical and chemical stability and are made of high-quality PP (equivalent to US pharmacopoeia USP Class VI). Caps are made of PE.


- Centrifugation: conical up to 16000 x g and with rim up to 3000 x g

• Free from DNase and RNase
• Endotoxin level: <0.5 EU/ml
• Sterile goods are gamma-sterilized (SAL 10^-6)
• Available in bags (25 pcs/bag) or racks (15 ml tubes: 50 pcs/rack, 50 ml tubes: 25 pcs/rack)

Accessories Cryo boxes for 50 ml and 15 ml centrifuge tubes, cardboard Accessories Boxes for centrifuge tubes, PP Accessories Universal racks for different tube sizes, PP Accessories Racks for 15 ml centrifuge tubes, PA Accessories Racks for 50 ml centrifuge tubes, PA

All LABSOLUTE® clear and amber volumetric flasks with accuracy class A comply with the DIN EN ISO 1042 standard. They are made of high-quality borosilicate glass 3.3 and calibrated to "In" (20 °C). All volumetric flasks are supplied with suitable stoppers made of glass or PE. A batch-specific certificate of conformity can be supplied on request.

Accessories Stoppers, HDPE Accessories Hollow glass stoppers, type C, borosilicate glass 3.3 Alternative Volumetric flasks, class A, with PE stopper, blue graduation Alternative Volumetric flasks, class A, with hollow glass stopper, blue graduation Alternative Volumetric flasks, amber, class A, with PE stopper, white graduation

LABSOLUTE® beakers with durable volume scale and spout are made of high-quality borosilicate glass 3.3 and are therefore extremely temperature-resistant up to 500 °C. The beakers in low and high form comply with DIN 12331 and ISO 3819. They are resistant to cold lyes/alkaline solutions and strong acids, with the exception of hydrofluoric acid and hot, concentrated phosphoric acid.

Alternative Beakers, high form, borosilicate glass 3.3

With the autoclavable bags made of PP, you can dispose of your contaminated labware. Thanks to the strong PP film (50 µm) and an extra broad seam at the bottom, the bags are particularly tear-resistant. The bag size 200 x 300 mm is delivered for both versions in a handy dispenser box.

Autoclavable at 121 °C. For autoclaving, the bags must only be slightly closed. Highly transparent.

Accessories Holder for disposal bags Alternative Disposal bags, standard, PP

The LABSOLUTE® one neck pear shaped flasks are made of high-quality borosilicate glass 3.3 and therefore extremely temperature-resistant up to 500 °C. The flasks comply with DIN 12383. They are resistant to cold lyes/alkaline solutions and strong acids with the exception of hydrofluoric acid and concentrated, hot phosphoric acid.

Accessories Hollow glass stoppers, type C, borosilicate glass 3.3 Accessories Stoppers, HDPE Accessories Joint clips, for conical ground joints, POM Accessories Joint clips, for conical ground joints, stainless steel Alternative Round bottom flasks, with standard ground joint, borosilicate glass 3.3 Alternative Two neck round bottom flasks, side neck 20°, borosilicate glass 3.3 Alternative Three neck round bottom flasks, side necks parallel, borosilicate glass 3.3 Alternative Three neck round bottom flasks, side necks 20°, borosilicate glass 3.3

With the autoclavable bags made of PP, you can dispose of your contaminated labware. Thanks to the strong PP film (50 µm) and an extra broad seam at the bottom, the bags are particularly tear-resistant. The bag size 200 x 300 mm is delivered for both versions in a handy dispenser box.

Autoclavable up to 134 °C. For autoclaving, the bags must only be slightly closed.

Accessories Holder for disposal bags Alternative Disposal bags, highly transparent, PP

LABSOLUTE® laboratory bottles are made of high-quality borosilicate glass 3.3 and are therefore extremely temperature-resistant up to 500 °C. They comply with EN ISO standard 4796-1. The bottles have a retrace code, a durable volume scale as well as a GL45 thread (GL32 thread for 50 ml bottles). The bottles as well as the closures are resistant against a wide range of chemicals.

With blue pouring rings and screw caps made of PP with integrated lip seal. Autoclavable at 121 °C.

Accessories Screw caps, PP Accessories Pouring rings, PP Accessories Pouring rings and screw caps, PBT Alternative Laboratory bottles, clear, with PBT screw caps Alternative Laboratory bottles, amber, with PP screw caps

The LABJOURNAL offers all criteria for documenting data and experimental processes most efficiently. Each page is numbered serially and includes space for title, signature and date. In addition, you can create a table of contents and write notes on the first pages of the notebook. The acid-free pages are ageing resistant and therefore suitable for long-term archiving. Combined with the waterproof and chemical-resistant cover, these conditions guarantee safe documentation of your notes over many years.

• Different number of pages
• Three colours
• Lined or grid version
• The lined version also contains vertical shaded lines
• Dimensions (W x H): 218 x 281 mm

Alternative Notebook

LABSOLUTE® offers a complete assortment for your pipetting tasks - no matter whether packed in bags, within racks or as an efficient refill system: all pipette tips are part of a system in which the components can be exchanged. The pipette tips are made of pure PP and comply with EN ISO 8655. In combination with the LABSOLUTE® pipettes, they constitute the perfect pipetting unit. Thanks to their universal fit and the high-quality material, the tips guarantee a firm and absolutely tight hold on various pipette models. And all this with much less attachment and ejection forces. The fully automated production and packaging of the pipette tips under clean room conditions guarantee completely contamination-free working conditions with products which are certified free of DNase, RNase, human DNA and pyrogens - to ensure reproducible and consistent results.

• High quality standard
• Graduated tips: the volume is visible at first glance
• 200 and 1000 µl tips are available in yellow or blue, respectively
• Autoclavable

Our pipette tips boxes for comfortable and efficient pipetting:

• Simple-to-use closure for single-handed opening
• The transparent design provides a complete overview of the tips
• Coloured trays enable fast recognition of the volume
• Refill system: easy and fast removal and replacement of the trays
• Stackable boxes for space-saving and safe storage
• Autoclavable at 121 °C

The sustainable LABSOLUTE® refill system for sterile filter tips can be replaced in one easy step. The carrier plates are individually sterile-packed and the different colours allow the volume to be directly identified.

The filter tip refill system is suitable for the LABSOLUTE® pipette tip boxes and the boxes from the LABSOLUTE® pipette tip series.

Accessories Pipette tips boxes Accessories Single-channel pipettes Accessories Eight-channel pipettes Accessories Twelve-channel pipettes Alternative Pipette tips without aerosol barrier in racks, sterile Alternative Pipette tips without aerosol barrier in racks, non-sterile Alternative

The LABSOLUTE® pestles are made of high-quality porcelain and comply with DIN 12906. They are temperature resistant up to 1,000 °C. The pestles have an unglazed head and a glazed handle as well as a rough pounding surface.

Accessories Mortars, porcelain

The LABSOLUTE® mortars are made of high-quality porcelain and comply with DIN 12906. They are temperature resistant up to 1,000 °C. The inner surface and base are unglazed. The rough pounding surface leads to the best possible grinding result.

Accessories Pestles, porcelain

The safe seal micro tubes from LABSOLUTE® have a special locking mechanism preventing unintentional opening of the lid during applications with thermal stress.

• Frosted cover and labelling field
• Graduation for easy volume determination
• Non-sterile
• Can be centrifuged up to 18000 x g (0.5 ml and 2.0 ml) and 30000 x g (1.5 ml)
• Autoclavable

Accessories Racks for micro tubes, 80 wells, PP Accessories Floating racks, 16 or 20 wells, PP Accessories Universal racks for different tube sizes, PP Accessories Rack for micro tubes, 20 wells, PP Alternative Micro tubes, PP

The cell culture flasks from LABSOLUTE® are made exclusively of PS, corresponding to the highest international standards (USP Class VI). A short, wide and angled neck allows an easy handling while the risk of contamination is minimized. The treatment of surfaces allows adherent cells a uniform and even cell adhesion.

• Short and wide sloping neck for easy access
• Easily stackable
• Both flasks sides have engraved graduation with a labelling area
• Screw cap with a hydrophobic 0.22 μm filter for ventilation
• Packed upright in resealable bags
• Surface is treated with vacuum gas plasma
• Sterilized by radiation (SAL 10^-6)

Accessories Cell scrapers and cell lifters, sterile Alternative Cell culture dishes, treated, sterile, PS Alternative Cell culture multiwell plates, treated, sterile, PS

LABSOLUTE® offers a comprehensive range in the field of PCR consumables. These include tubes, strips of 8 tubes, 96-well plates and sealing films. In addition to the standard profile variants with 0.2 ml working volume, we also offer some low-profile versions with a working volume of 0.1 ml in the case of strips and plates.

• Suitable for all common thermal cyclers
• Optimal heat transfer and short cycle times through very thin and uniform wall thickness

The LABSOLUTE® strips of 4/8 PCR tubes offer optimum heat transfer between the thermal cycler and the reaction mix through their extra thin and uniform vessel walls.

• Secure sealing reduces evaporation
• Available with flat and domed caps
• High quality PP
• Free from DNase, RNase and human DNA
• Standard profile with 0.2 ml working volume
• Low profile with 0.1 ml working volume
• Autoclavable at 121 °C

Accessories Racks for PCR tubes, 96 wells, PP Accessories PCR cap strips, PP Alternative PCR tubes 0.2 ml, PP Alternative PCR 96-well plates, PP

The LABSOLUTE® Erlenmeyer flasks with a durable volume scale are made of high-quality borosilicate glass 3.3 and are therefore extremely temperature-resistant up to 500 °C. The wide-neck and narrow-neck flasks, as well as the flasks with standard ground joint comply with the valid standards. The flasks are resistant to cold lyes/alkaline solutions and strong acids, with the exception of hydrofluoric acid and hot, concentrated phosphoric acid.

Comply with ISO 1773.

Alternative Erlenmeyer flasks, wide-neck, borosilicate glass 3.3 Alternative Erlenmeyer flasks, with standard ground joint, borosilicate glass 3.3

The LABSOLUTE® weighing boats made of PS feature smooth surfaces to transfer each kind of sample easily with minimal sample loss. The material is antistatic, biologically inert and resistant to both weak and diluted acids, lyes and alcohols and to temperatures from -10 °C up to 70 °C. All dishes are food-grade compliant and can be used with microwave moisture analyzers.

The flexible design of these antistatic weighing dishes is ideally suited to transfer even small amounts of samples precisely.

Alternative Weighing boats, square, PS Alternative Sample dishes with handle, aluminium Alternative Weighing paper

The cuboid LABSOLUTE® slide containers for microscope slides made of neutral PP are unbreakable and have an opening at the side. They offer space for up to 5 slides (approx. 76 x 26 mm), which can be stored and transported without touching each other.

Accessories Microscope slides, cut edges Accessories Adhesion slides for tissue sections Accessories Microscope slides, ground edges Alternative Microscope slide folders, cardboard

Short thread vials and micro-vials ND9 with wide opening made of natural or amber PMP or PP are a shatterproof alternative to glass vials.

Accessories Micro-inserts for vials with wide opening, glass Accessories Vial racks, acrylic Accessories Vial racks, PP Accessories ND8, ND9, ND10, ND11 - 81 positions Accessories With natural rubber / TEF septa Accessories With RedRubber / PTFE septa Accessories With pure PTFE septa Accessories With silicone / PTFE septa Accessories With silicone / PTFE septa, Ultrabond Accessories With silicone / PTFE septa, magnetic Accessories MS short thread screw seal ND9 Alternative Short thread vials and micro-vials ND9, wide opening Alternative Short thread vials and micro-vials ND9, SureStop Alternative Kits ND9 Alternative Kits ND9, certified

The short-thread vials and micro vials ND9 with a wide opening made of transparent PP are ideal for PFAS analysis.

Accessories With thinned penetration area, PE Accessories With silicone septa Alternative Snap ring vials and micro-vials ND11, PP, PFAS grade

The LABSOLUTE® graduated and volumetric pipettes are made of soda-lime glass and have a batch identification. A batch-specific certificate of conformity is available on request.

Calibration
The graduated and volumetric pipettes are calibrated to "Ex" (+5 seconds) so that the draining volume of liquid corresponds to the printed volume specification after five seconds.

Accuracy class AS
All LABSOLUTE® graduated and volumetric pipettes satisfy the criteria of the highest accuracy class A. The tolerance lies within the standard defined for class A. The suffix "S" means rapid draining. The draining time is between 5 and 20 seconds, depending on the nominal volume, as opposed to 10 to 60 seconds with class A.

Durable labelling
All information is imprinted in brown diffusion dye. This dye is burned into the surface of the glass and can only be destroyed by glass erosion. The labelling is therefore unaffected by chemicals and cleaning agents.

According to DIN EN ISO 835.

Accessories Pipette stand, vertical, 94 positions, PP Accessories Safety pipette fillers, natural rubber Accessories Pipette controller

The qualitative filter papers are manufactured from pure cellulose with a proportion of alpha-cellulose of almost 100 %. The ash content is about 0.06 %.

Grade 2020, medium to slow filtering, particle retention 5-13 µm, filtration speed 88 s according to DIN 53137, basis weight 73 g/m², thickness 0.16 mm

For fast filtration with fine particles for general, electrolytic application in schools, research, health care, food and cosmetics industry.

Alternative Circles, qualitative, grade 2020

The LABSOLUTE® Erlenmeyer flasks with a durable volume scale are made of high-quality borosilicate glass 3.3 and are therefore extremely temperature-resistant up to 500 °C. The wide-neck and narrow-neck flasks, as well as the flasks with standard ground joint comply with the valid standards. The flasks are resistant to cold lyes/alkaline solutions and strong acids, with the exception of hydrofluoric acid and hot, concentrated phosphoric acid.

Comply with DIN EN ISO 24450.

Alternative Erlenmeyer flasks, narrow-neck, borosilicate glass 3.3 Alternative Erlenmeyer flasks, with standard ground joint, borosilicate glass 3.3

The LABSOLUTE® holder for disposables bags is made of steel wire and coated with a PE resin.

• With rubber feet
• Suitable for 200 x 300 mm disposable bags (7.696 994, 7.697 000)

Accessories Disposal bags, standard, PP

LABSOLUTE® culture tubes are sterile disposable tubes suitable for microbial cultivation or storage under aerobic or anaerobic conditions.

The dual closure made of polyethylene (PE) enables aerobic or anaerobic cultivation, depending on the position. The cap allows the tube to be opened or closed easily and safely, ensuring clean and safe working conditions.

The LABSOLUTE® culture tubes made of PP are unbreakable, resistant to common acids, bases and solvents and can be centrifuged up to 3000 x g at temperatures from -80°C to 121°C.

• Aerobic and anaerobic cultivation and storage
• Temperature resistance from -80°C to 120°C
• Centrifugation at 3000 x g
• Sterile due to gamma radiation
• Culture tubes with and without graduation

LABSOLUTE® funnels made of transparent PP are autoclavable at 121 °C. Compared to glass funnels, the shatterproof PP funnels are a good and cheap alternative for almost every filtration of low-viscosity liquids. Standard filter paper fits into the funnels. Ribs on the inside ensure fast filtration. Ribs on the outside avoid air bubbles between the filter paper and the funnel's surface.

Alternative Funnels, short stem, borosilicate glass 3.3 Alternative Powder funnels, PP

The stable, autoclavable LABSOLUTE® racks made of PP provide space for up to 5x 16 tubes (Ø well 11 mm). The wells are suitable both for 1.5 ml and 2.0 ml tubes and individually marked.

• Available in different colours
• Dimensions (W x H x D): 225 x 28 x 67 mm

Accessories Micro tubes, PP Accessories Safe seal micro tubes, PP Accessories Micro tube with flip cap, PP Alternative Rack for micro tubes, 20 wells, PP Alternative Universal racks for different tube sizes, PP

The LABSOLUTE® separating funnels according to Squibb are made of high-quality borosilicate glass 3.3 and are therefore extremely temperature-resistant up to 500 °C as well as chemical resistant. The funnels are available with and without graduation. They comply with DIN ISO 4800, and are sold including a PTFE stopcock as well as a PE stopper. The chemical resistance mainly depends on the resistance of the PE stopper.

Graduation in white enamel colour.

Alternative Separating funnels acc. to Squibb, borosilicate glass 3.3

LABSOLUTE® culture tubes are sterile disposable tubes suitable for microbial cultivation or storage under aerobic or anaerobic conditions.

The dual closure made of polyethylene (PE) enables aerobic or anaerobic cultivation, depending on the position. The cap allows the tube to be opened or closed easily and safely, ensuring clean and safe working conditions.

The transparent PS tubes are suitable for easy observation, have a moderate temperature resistance (-20°C to 70°C) and can be centrifuged up to 1400 x g.

• Aerobic and anaerobic cultivation and storage
• Temperature resistance from -20°C to 70°C
• Centrifugation at 1400 x g
• Sterile due to gamma radiation
• Culture tubes with and without graduation

The LABSOLUTE® all purpose cloths can absorb large quantities of liquid quickly and are suitable for universal use.

LABSOLUTE® sample beakers with graduation made of PP are very well suited for the storage und transport of solid and liquid samples.

• Highly transparent, non-cytotoxic PP beaker with green HDPE cap
• Very stable design
• Leak-proof due to double threaded cap and silicone ring in the cap (250 ml and 500 ml)
• Ribbed edge on bottom and cap for good grip - even with gloves
• With graduation on two sides

Alternative Sample containers, PP

The LABSOLUTE® weighing boats are made of borosilicate glass 3.3 and resistant against a wide range of chemicals. The funnel shape allows a lost-free ejection of the sample. Additionally the weighing sample can be transferred to a flask easily using any kind of liquid.

The LABSOLUTE® multiwell tissue culture plates are suitable for handling multiple samples in a single experiment. From 4-well up to 96-well plates, we offer you the appropriate multiwell plate for every experiment. Numbered wells and a rounded corner in the cover reduce misplacement and facilitate identification. The treatment of surfaces allows adherent cells a uniform and even cell adhesion.

• Evaporation is reduced by condensation rings
• Easily stackable
• Individually wrapped in paper/plastic blister pack
• Surface is treated with vacuum gas plasma
• Sterilized by radiation (SAL 10^-6)

Accessories Cell scrapers and cell lifters, sterile Alternative Cell culture dishes, treated, sterile, PS Alternative Cell culture flasks, treated, sterile, PS

The stable, natural coloured LABSOLUTE® balloon flasks are made of LDPE. The lids and the stopcock are made of PP. They are ideal for mixing, transporting and storing liquids. The carboys are extremely tight and have useful handles on both sides. They can be ordered with or without stopcock.

Alternative Carboys with stopcock, LDPE

The set of LABSOLUTE® magnetic stirring bars is a perfect assortment of the most common sizes for almost all applications. The cylindrical, smooth, PTFE-coated stirring bars come in a solid box with a transparent, hinged lid.

The set consists of the following 10 stirring bars: 1x 15 x 6 mm, 2x 20 x 7 mm, 2x 25 x 7 mm, 1x 30 x 7 mm, 2x 40 x 7 mm, 1x 50 x 7 mm and 1x 60 x 7 mm.

Accessories Stirring bar retrievers, PTFE Alternative Magnetic stirring bars, cylindrical, PTFE