Solvent storage/handling

HPLC solvent filters for 3.2mm OD tubing.

The red floater is immediately visible when the container has reached the critical fill level. Perfect for canisters of opaque material, where the fill level is not visible from the outside.

• Approved S.C.A.T. technology of the SafetyWasteCaps
• Different thread sizes
• Connections for capillaries and tubings
• Mechanical or electronic (E) level control
• With connection for S.C.A.T. exhaust filters

Consisting of PTFE body with connecting nut and two lateral GL18 threaded necks, a 300mm long FEP inlet tube and a gas distributor with frit. Easy in- and outlet of gas by means of rigid-walled tubing (e.g. PTFE) which can be connected to the threaded necks using Bola Laboratory Screw Joints. Elastic tubing can be connected by means of hose connectors. Inlet tube can be individually shortened. Special feature: the body of the adapter can be turned independently from the connecting nut. This means, that the completely assembled adaptor can be removed and fixed onto another bottle without the risk of disarranging the tubing. Suitable for bottles with GL45 or GLS80 threads and capacities between 100ml and 5000ml.

Use SafetyCaps and SafetyWasteCaps also for bottles with GL40 or GL38 thread. Further adapters in different thread sizes are available on request.

HPLC Safety Set HPLC Safety Set Generation 2.0 suitable for all HPLC Systems
Complete system for safe extraction and disposal of solvents.

One single set for Solvent supply and Waste:

• 4x SafetyCap III HPLC Safety Set (Generation 2.0) GL45
• 4x Air valve HPLC Safety Set (Generation 2.0) comes with SafetyCap III
• 4x Solvent bottle 1 L, GL45, glass
• 10x Blind plug for capillary connections
• 5x Fittings ID 2.3 mm violet
• 5x Fittings ID 3.2 mm blue
• 5x Fitting ID 1,6 mm green
• 5x Fittings ID 3.2 mm yellow
• 1x Tube fitting, curved, 6.4-9.0 mm (comes with SafetyWasteCap GL45)
• 1x SafetyWasteCap HPLC Safety Set (Generation 2.0) GL45
• 1x Exhaust filter HPLC Safety Set (Generation 2.0) size M
• 1x Container 5 L, GL45, HDPE
• 2x Tube fitting, straight, 6-8 mm
• 1x Tube fitting, angled, 9.5-10 mm

Screw cap for thread GL 45 made of PPS, freely turnable distributor body made of PTFE with female threads UNF ¼" 28 G for connecting capillary tubing (O. D. 3.2 mm) or a b.safe air valve with service life indicator.

Scope of supply:
Cap A: 2 x connections, 1 x fitting (PFA), 1 x air valve
Cap B: 3 x connections, 2 x fittings (PFA), 1 x blind fitting (PFA), 1 x air valve
Cap C: 4 x connections, 3 x fittings (PFA), 2 x blind fittings (PFA), 1 x air valve
Cap D: 5 x connections, 4 x fittings (PFA), 3 x blind fittings (PFA), 1 x air valve
Cap E: 7 x connections, 6 x fittings (PFA), 5 x blind fittings (PFA), 1 x air valve

Connection straight, with O-ring from EPDM.