Filter handling for MF method testing has been revolutionized by the EZ-Pak membranes and dispensers. They combine the advantages of ready-to-use, sterile and individually packaged membranes.

The Steritest™ NEO device for liquids in ampoules or collapsing bags contains a needle for easy access to ampopules and a separate vent needle. A special needle adapter facilitates access to collapsing bags. The blue color coding on the ground indicates that the membrane is made of cellulose mischester. The red coding indicates a PVDF membrane. This membrane provides an optimal filtration flow rate for standard products.

The stacked-disk format of Millipak® filter units eliminates the risk of fiber release from downstream support material.

Features & Benefits:

• No risk of membrane cracking as the 0.22 µm membrane is supported by a rigid plastic disc with channels
• As the membranes are welded onto the support disc, the risk of contamination is considerably reduced
• Minimum dead volume thanks to the large filter surface

Without any filtrate transfer, you can filter into a 50 ml centrifuge tube with the Steriflip® filter unit. Simply screw the filter unit onto your centrifuge tube, tilt it 180 degrees and apply vacuum. The second tube, which is attached to the filter unit, now contains your sterile filtrate.

If you want to have free chlorine, large particles and organic compounds removed from your tap water, use the Progard® pre-treatment packs. The reverse osmosis membrane (RO) is protected from chlorine oxidation, mineral scaling and organic pollution.

Features & Benefits:

• Ensures optimization of system life and performance

• Depth filtration for particle removal

Durapore® PVDF membranes are characterized by high throughput and high flow rate. To maximize recovery and minimize interaction with your sample, the membrane has very low protein binding.

Features & Benefits:

• Can be sterilized by ethylene oxide and gamma irradiation
• Available in different pore sizes

PetriSlides can also be used instead of Petri dishes. An inner ring is located in the transparent cover to ensure that the membrane lies securely on it. Due to its transparency it allows microscopy even if the lid still rests on the PetriSlides. The storage of the PetriSlides is uncomplicated, either in the supplied carton or in slide boxes.

The glass fiber filters are available with and without binder resins and can be sterilized by ethylene oxid, gamma irridation or in the autoclave.

Glass fiber filters without binding resin:

• Maintain their structural integrity to 500 °C without weight loss when heated
• For gravimetric analysis
• For the filtration of hot gases
• Type APFA/APFB/APFC/APFDAPFF/AP40

High sample recovery by ultrafiltration, even in diluted samples, and fast sample processing are offered by Amicon® ultra-centrifugal filters. The centrifugal filters, for fastest and most efficient concentrations, are specially designed for sensitive downstream applications. The Ultracel-10 centrifugal filters have a NMWL (Nominal Molecular Weight Limit) of 10 kDa.

Features & Benefits:

• Prevents rotation to dryness
• Providing a predictable concentration factor
• No calibration necessary if several samples are to be run in parallel
• Vertical membrane, aligned with filtrate
• Less clogging, faster filtration and less waste

• Robust, slim unit that prevents leakage

Amicon® ultra centrifugal filters promote high sample recovery, even in diluted samples, through ultrafiltration and also provide fast sample processing. Particularly suitable for sensitive downstream applications as the centrifugal filters provide the fastest and most efficient concentration. The Ultracel-3 centrifugal filters have a NMWL (Nominal Molecular Weight Limit) of 3 kDa.

Features & Benefits:

• Prevents turning to dryness
• Provides a predictable concentration factor
• No calibration is necessary to run multiple samples in parallel
• Vertical membrane aligned with filtrate instead of vertical for loss constipation, less waste and faster filtration
• 25 to 80 times the concentration in one step
• Wide chemical compatibility, heat-sealed membrane and compatible with pH 1-9
• Maximum sample recovery as Ultracel® low-bund membrane > 90 % recovery
• Centrifuge your valuable sample with security in a robust, slim unit that prevents leakage

The filter provides effective protection against airborne contaminants. For Elix® water stored in 30/60/100 PE storage tank.

For fast and uncomplicated sterile filtration of aqueous solutions in bottles with narrow or wide threads, the Steritop™ bottle top filter with large filter surface is ideal. Inside the funnel there is a small tab with which you can securely attach a separately available pre-filter during filtration. In order to provide optimum protection against contamination, the thread of the bottle cap is slightly set back.

• Fast flow rates and low protein binding
• Gamma sterilized
• Click-seal closure signals correct closure
• Quick Release: unscrewing the bottle with only a quarter turn
• Easier labeling due to frosted writing surface/bright cap color

The HPC Total Microbial Count Immersion Tester simplifies the regular microbiological analysis of surfaces for biological contamination of yeasts, moulds and bacteria. The ease of use eliminates the need for cumbersome and expensive testing techniques. The swab even allows sampling in hard-to-reach areas.

Suitable for:

• Food and Beverages
• Pharmaceuticals
• Cosmetics
• Water for dental use
• Dialysates

Pour l'extraction des protéines, la purification des protéines et la préparation des échantillons.
 

• Concentration de l'échantillon de 50 à 200 fois
• Compatibles avec les rotors oscillants
• Une butée fixe empêche la centrifugation jusqu'à la sécheresse.

In contrast to nitrocellulose, Immobilon membranes have a number of advantages. An optimized coloring capacity, a broad solvent compatibility and a lower background make the membrane their solution. Immobilon membranes do not rupture or curl and can be cut without breaking. Reprobing is also possible many times. The Immobilon P membrane is particularly suitable for proteins with a molecular weight greater than 20 kDa.

Features & Advantages

• 0.45 µm Pore size
• Suitable for Western Blotting
• Millipore Rapid Immunodetection Protocol reduces detection time by up to 2 hours

SynergyPak® cleaning cartridges contain a special combination of cleaning media to remove traces of contaminants affecting specific applications. The material of which the cartridges are made has been carefully selected to produce pure or high purity water.
'

This cartridge is designed to produce high-resistance water from carefully selected cleaning media.

Features & Benefits:

• Guarantee of water quality
• Ensuring compliance with system specifications

Amicon® ultra centrifugal filters promote high sample recovery, even in diluted samples, through ultrafiltration and also provide fast sample processing. Particularly suitable for sensitive downstream applications as the centrifugal filters provide the fastest and most efficient concentration. The Ultracel-30 centrifugal filters have a NMWL (Nominal Molecular Weight Limit) of 30 kDa.

Features & Benefits:

• Prevents turning to dryness
• Provides a predictable concentration factor
• No calibration is necessary to run multiple samples in parallel
• Vertical membrane aligned with filtrate instead of vertical for loss constipation, less waste and faster filtration
• 25 to 80 times the concentration in one step
• Wide chemical compatibility, heat-sealed membrane and compatible with pH 1-9
• Maximum sample recovery as Ultracel® low-bund membrane > 90 % recovery
• Centrifuge your valuable sample with security in a robust, slim unit that prevents leakage

Amicon® ultra centrifugal filters promote high sample recovery, even in diluted samples, through ultrafiltration and also provide fast sample processing. Particularly suitable for sensitive downstream applications as the centrifugal filters provide the fastest and most efficient concentration. The Ultracel-50 centrifugal filters have a NMWL (Nominal Molecular Weight Limit) of 50 kDa.

Features & Benefits:

• Prevents turning to dryness
• Provides a predictable concentration factor
• No calibration is necessary to run multiple samples in parallel
• Vertical membrane aligned with filtrate instead of vertical for loss constipation, less waste and faster filtration
• 25 to 80 times the concentration in one step
• Wide chemical compatibility, heat-sealed membrane and compatible with pH 1-9
• Maximum sample recovery as Ultracel® low-bund membrane > 90 % recovery
• Centrifuge your valuable sample with security in a robust, slim unit that prevents leakage

The Milliflex® Quantum high purification columns were developed to eliminate ions and traces of organic substances in ultrapure water.
To prevent operating errors and to ensure full traceability, there is the RFID identification (Radio Frequency Identification).

Pour la stérilisation de solutions aqueuses. Les unités de filtration sont conçues pour fonctionner avec des seringues, des pompes péristaltiques et des réservoirs sous pression.
 

• Stériles
• Hydrophiles
• Faible fixation des protéines
• Luer-lock interne

185 nm mercury UV lamp for photo-oxidation of organic compounds. Can be used with Milli-Q systems built in 2001 or later.