BIOSOLUTE® ready-to-use contact plates with a wide range of applications for detecting microbial colonization. BIOSOLUTE® contact plates feature an agar surface that is slightly convex and curved over the edge of the Petri dish. With a size of 55 mm, they come in a practical blister of 6 plates each and are thus individually packaged. The blisters are each double packed in a cellophane bag or - for use in cleanrooms - triple packed in two cellophane bags.

• Produced under cleanroom conditions
• Quality control according to ISO 11133
• Storable at room temperature
• Long shelf life

The blue LABSOLUTE® waste bags made from LDPE with a wall thickness of 35 µm are tear resistant, flexible and offer a wide range of applications. The red waste bags with a material thickness of 150 μm are ideal for medical practices, hospitals or laboratories to dispose hazardous waste. All LABSOLUTE® LDPE waste bags are made from 100 % recycled material.
The smaller waste bags with a volume of 30 and 60 l made from HDPE are perfect for small laboratory waste bins.

The powder-free, blue LABSOLUTE® disposable gloves Protective made of nitrile with a rolled cuff are the best supplement to the LABSOLUTE® Sensitive gloves for a higher protection level.

The silicone-free gloves with an AQL value of 1.5 are textured on the outside and comply with the following standards and directives

• EN 420, EN 421, EN ISO 374-1, -2, -4, -5 and EN 16523-1
• (EU) 2016/425 (PPE in accordance with CE category III for complex risks)
• 1935/2004 (can be used in direct contact with food)
• ASTM 1671 / ISO 16604 (viral penetration)

• Approved for the use within Hazard Analysis and Critical Control Points (HACCP) concepts
• UV transmission less than 0.1 % at 360 nm
• Delivered in handy dispenser boxes of 100 (S, M, L) or 90 pieces (XL)
• Free from phthalates, softeners and allergenic latex proteins
• Storage life: 3 years
• Length: approx. 240 mm
• Thickness (double): finger min. 0.30 mm, palm min. 0.22 mm, cuff min. 0.20 mm
• Can be worn on the left or right hand

The sporty safety spectacles from LABSOLUTE® comply with EN 166 and EN 170. They match even the strictest regulations in terms of occupational protection and safety. The lenses of all spectacle models are made of high-quality polycarbonate UV 2 - 1,2. Special coating of the crystal-clear lens guarantees a scratch-proof and permanent non-fogging viewing surface. Innovative technologies and ultra-modern materials also ensure an excellent fit, distortion-free vision and 100 % UV protection - for, quite simply, comfort of the highest order.

Ideal for spectacle wearers: LABSOLUTE® vision. These lightweight over spectacles are also impressive due to their reliable protection, unrestricted lateral view and user-friendly wearing comfort.

Lightweight over-spectacles for your safety

• Unrestricted lateral view
• Excellent comfort and secure grip thanks to soft plastic on the arm ends

LABSOLUTE® measuring and griffin beakers are made of chemical-resistant, transparent PP and are therefore particularly lightweight. They feature a clearly legible printed scale and a functional spout and are approved for food use and autoclavable up to 121 °C. Production is compliant with ISO 7056.

• Smooth surface for quick and easy cleaning
• Excellent resistance to strong, concentrated acids and alkaline solutions/lyes as well as aliphatic alcohols
• Good resistance to ketones, aldehydes and aliphatic and aromatic hydrocarbons

The LABSOLUTE® cover glasses made of highly resistant borosilicate glass 3.3 of the first hydrolytic class are the perfect addition to every microscopy system. They are guaranteed free of contamination, bubbles or smears and comply with DIN ISO 8255-1 and 8255-2. The cover glasses are supplied in especially handy and secure boxes.

LABSOLUTE® sponges are high quality and ideal for cleaning and removing stubborn dirt from sensitive surfaces.

• Household sponge in three different colours
• Cleaning sponge with strong scrubbing surface and handy grip groove

All LABSOLUTE® measuring and mixing cylinders made of borosilicate glass 3.3 comply with DIN EN ISO 4788. They are calibrated to "In" (20 °C) and have a solid hexagonal glass base for a secure stand.

With functional spout and batch number. A batch-specific certificate of conformity is available on request.

With the autoclavable bags made of PP, you can dispose of your contaminated labware. Thanks to the strong PP film (50 µm) and an extra broad seam at the bottom, the bags are particularly tear-resistant. The bag size 200 x 300 mm is delivered for both versions in a handy dispenser box.

Autoclavable up to 134 °C. For autoclaving, the bags must only be slightly closed.

LABSOLUTE® round bottom flasks made of high-quality borosilicate glass 3.3 comply with the valid standards. They are available in different volumes and have the common ground joint sizes. All LABSOLUTE® round bottom flasks are characterized by very good chemical and temperature resistance. Because of the round shape, the flasks are ideal for consistent heating of liquids. Due to the standard ground joints, the flasks can be easily combined with other glass labware such as condensers.

Comply with DIN EN ISO 4797.

The ready-to-use buffer solutions from CHEMSOLUTE® are renowned for their quality and ease of use.

- Accuracy: ±0.02 pH units, reference temperature 20 °C

• Traceable to standard reference material of the National Institute of Standards and Technology (NIST)
• In PP bottles (500 ml & 1000 ml) or polytainers (5000 ml)

The LABSOLUTE® petri dishes are made of crystal-clear PS and offer high optical clarity. The dishes with three vents support gas exchange and are ideal for short incubation times. Dishes without vents are best suited for anaerobic and long-term work. The Petri dishes are prepared and packed under aseptic conditions. Sterilisation for the sterile dishes is done by beta rays.

• Perfectly stackable
• Heat-resistant from -40 - 70 °C

The LABSOLUTE® sample dishes made of high-grade aluminium are perfectly suited for moisture analysis.

With the autoclavable bags made of PP, you can dispose of your contaminated labware. Thanks to the strong PP film (50 µm) and an extra broad seam at the bottom, the bags are particularly tear-resistant. The bag size 200 x 300 mm is delivered for both versions in a handy dispenser box.

Autoclavable at 121 °C. For autoclaving, the bags must only be slightly closed. Highly transparent.

The LABSOLUTE® tubes have very good thermal, mechanical and chemical stability and are made of high-quality PP (equivalent to US pharmacopoeia USP Class VI). Caps are made of PE.


- Centrifugation: conical up to 16000 x g and with rim up to 3000 x g

• Free from DNase and RNase
• Endotoxin level: <0.5 EU/ml
• Sterile goods are gamma-sterilized (SAL 10^-6)
• Available in bags (25 pcs/bag) or racks (15 ml tubes: 50 pcs/rack, 50 ml tubes: 25 pcs/rack)

The white LABSOLUTE® shoe covers made of PP fleece with blue and stable CPE outsoles are suitable for use in hospitals, day care centres and the food industry.

• Fits all shoe sizes
• Length approx. 40 cm

The LABSOLUTE® shoe covers made of CPE offer protection against contamination and sensitive floors in visitor traffic, as well as the classical applications in medicine and the food industry.

• Embossed, with elastic band
• Fits all shoe sizes
• Length approx. 41 cm

LABSOLUTE® laboratory bottles are made of high-quality borosilicate glass 3.3 and are therefore extremely temperature-resistant up to 500 °C. They comply with EN ISO standard 4796-1. The bottles have a retrace code, a durable volume scale as well as a GL45 thread (GL32 thread for 50 ml bottles). The bottles as well as the closures are resistant against a wide range of chemicals.

With blue pouring rings and screw caps made of PP with integrated lip seal. Autoclavable at 121 °C.

The LABSOLUTE® laboratory wipes made of non-chlorine bleached cellulose are especially low-lint and soft.

The holder is suitable for hygienic and easily accessible storage of the laboratory wipes. It is delivered including wall mounting material.

The LABSOLUTE® one neck pear shaped flasks are made of high-quality borosilicate glass 3.3 and therefore extremely temperature-resistant up to 500 °C. The flasks comply with DIN 12383. They are resistant to cold lyes/alkaline solutions and strong acids with the exception of hydrofluoric acid and concentrated, hot phosphoric acid.

The LABJOURNAL offers all criteria for documenting data and experimental processes most efficiently. Each page is numbered serially and includes space for title, signature and date. In addition, you can create a table of contents and write notes on the first pages of the notebook. The acid-free pages are ageing resistant and therefore suitable for long-term archiving. Combined with the waterproof and chemical-resistant cover, these conditions guarantee safe documentation of your notes over many years.

• Different number of pages
• Three colours
• Lined or grid version
• The lined version also contains vertical shaded lines
• Dimensions (W x H): 218 x 281 mm

All LABSOLUTE® clear and amber volumetric flasks with accuracy class A comply with the DIN EN ISO 1042 standard. They are made of high-quality borosilicate glass 3.3 and calibrated to "In" (20 °C). All volumetric flasks are supplied with suitable stoppers made of glass or PE. A batch-specific certificate of conformity can be supplied on request.

LABSOLUTE® beakers with durable volume scale and spout are made of high-quality borosilicate glass 3.3 and are therefore extremely temperature-resistant up to 500 °C. The beakers in low and high form comply with DIN 12331 and ISO 3819. They are resistant to cold lyes/alkaline solutions and strong acids, with the exception of hydrofluoric acid and hot, concentrated phosphoric acid.

CHEMSOLUTE® Universal pH-indicator paper is a cost-effective alternative for the rapid determination of the pH value and consists of high-quality filter papers impregnated with indicator solution.

• pH value determination in 1.0 pH steps
• With colour scale
• Roll (L x W): 5 m x 7 mm

The safe seal micro tubes from LABSOLUTE® have a special locking mechanism preventing unintentional opening of the lid during applications with thermal stress.

• Frosted cover and labelling field
• Graduation for easy volume determination
• Non-sterile
• Can be centrifuged up to 18000 x g (0.5 ml and 2.0 ml) and 30000 x g (1.5 ml)
• Autoclavable