for vacuum pumps

Filter

 Aspirator LLG-uniVACUUSYS

LLG

LLG-uni VACUUSYS Vacuum Aspiration System with integrated vacuum pump and vacuum controller is ideally suited for aspirating liquids in Life Science applications, e.g. the removal of media from cell cultures, aspiration of supernatants after centrifugation, or the removal of wash solutions from Immuno assay plates. The set vacuum is automatically re-adjusted in case of deviations....

 Accessories for Aspirator LLG-uniVACUUSYS

LLG

...

 Diaphragm vacuum pumps LABOPORT® N 820 G / N 840 G, chemically-resistant

KNF

The compact pumps feature a control knob for manual adjustments of the flow rate, making them well suited to a wide variety of applications, e.g. rotary evaporation, distillation, gel drying, degassing as well as the use with vacuum ovens and vacuum concentrators. Due to the manual rotational speed control, the pumps are quiet, very energy efficient, and can be optimally adjusted in accordance with the application....

 Oil for rotary vane pumps

VACUUBRAND

Oil for rotary vane pumps B: Standard pump oil. High viscosity, low vapour pressure, good chemical resistance.
Oil for rotary vane pumps K 8: For acid vapours. Strongly hygroscopic, with limited capacity for water vapour. Pump must be factory-adjusted to accept this oil.
Perfluorpolyether oil: Synthetic Oil. Certified for pumping pure oxygen....

 Vacuum fittings, nozzles

VACUUBRAND

Flanged tubing nozzles, aluminium. For Type KF small flange....

 Accessories for Biochem-VacuuCenter BVC basic/control/professional

VACUUBRAND

...

 Accessories for Vacuum Pump Systems LABOBASE® / LABOPORT®

KNF

...

 Disposable filtration capsules, Carbon cap

Cytiva

For use in pressure lines or vacuum pump exhausts. High-purity polypropylene housing with nozzle for connection to 12mm i.d. tubing. Contains highly pure activated charcoal granules and a folded HEPA filter at the base of the unit that retains 99.97% of all particles <0.3µm....

 Disposable Filtration Capsules, Hepa-Cap

Cytiva

Laminated hydrophobic glass microfibre filter. Ideal for the sterilisation of large volumes of air at low pressure. Available in two sizes, depending on the volume of air or gas to be filtered. Non-sterile, separately available. Autoclavable.

  • Maximum operating pressure 4.1 bar
  • Wide range of chemical compatibility
  • High loading capacity and high through-put filtration media
  • 99.97% of particles of 0.3µm or larger are retained
  • Autoclavable at up to 132 °C for one hour
  • Connectors: stepped barb (SB) and female national pipe thread (FNPT)
...

 Disposable filtration capsules, VacuGuard™ 150

Cytiva

Mounted in a robust PP housing. All have a low hold-up volume. Dimensions: (diameter x length) 53 x 46mm. Connections: For 6mm to 10mm diameter bore tubing. Also accept male luer slip.

  • Hydrophobic PTFE membrane and choice of chemical trap:
  • Activated carbon with 82000m2 filtration area removes organic vapours and radioactive particles
  • Molecular sieve - removes water from organic and alkaline air streams
  • Desiccant removes water from acidic air streams
  • 99.99% of particulates 0.1µm or larger are retained
  • Maximum operating pressure 1 bar (wet gas) / 4.2 bar (dry gas)
...

 In-line valves

VACUUBRAND

Butterfly design. Housing made of stainless steel with fluoroelastomer seal. Two Buna-N rings act as rotary shaft seals. Helium leak-tested. Leak rate 1 x 10 -6 mbar x l/s. Excellent throughput....

 Mini-Diaphragm vacuum pumps LABOPORT® N 96, chemically-resistant

KNF

The Pump combines a high flow rate with a very compact design. Suitable for filtration, SPE, and liquid aspiration using a vacuum. Due to the manual rotational speed control, the pump is quiet, very energy efficient, and can be optimally adjusted in accordance with the application.

  • Easy-to-clean surface
  • Very small footprint
  • Adjustable in flowrate due to manual rotational speed control
  • PTFE-coated diaphragm for use with aggressive/corrosive gases and vapors
...

 Local vacuum network VACUU LAN®

VACUUBRAND

The VACUU LAN ® local vacuum network allows multiple work stations to be connected to a single vacuum pump. This is useful for almost any conventional vacuum application in a chemical laboratory VACUU LAN ® can be directly incorporated into new laboratory installations or retro-fitted. All assemblies have integral check (1-way) valves. A practical and economical solution for multiple vacuum users in a single laboratory....

 PTFE Vacuum tubing with stainless steel small flanges, KF

VACUUBRAND

Antistatic PTFE. Flanges in grade 1.4305 stainless steel.
Virtually smooth internal walls to prevent accumulation of condensate or particles, provide high throughput with minimal turbulence.

  • chemically resistant PTFE
  • antistatic according to BS 2050:1978*, <107 Ohm resistance between inside and flanges to prevent formation of electrostatic charges inside and outside, as required for ATEX applications.
...

 Small flange fittings

VACUUBRAND

Small flanges. Stainless steel. With male or female conical ground joints and DN flange as outlined below....

 Vacuum Control Unit VC 900

KNF

  • Application: Rotary evaporation, Distillation, Multi-user vacuum system
  • Easy to use to control the vacuum application
  • Separate control unit with pressure sensors and two-step controlled valve to be placed independently from the operating unit
  • Vacuum controller can be operated with components from KNF and other producers
...

 Vacuum fittings, centring rings

VACUUBRAND

Stainless steel/FPM (e.g. Viton ®). For Type KF small flange....

 Vacuum fittings, clamping rings for type KF small flange

VACUUBRAND

...

 Vacuum fittings, external centering rings

VACUUBRAND

Plastic "PBT". For Type KF small flange....

 Vacuum fittings, flexible metal tubing, concertina

VACUUBRAND

Flanged at both ends. For Type KF small flange.
B1 = Minimum radius for one-off bending.
B2 = Minimum radius for repeated bending....

 Vacuum fittings, PVC tubing with KF flanged, support spiral insert

VACUUBRAND

Flanged at both ends. For Type KF small flange. Resistant to most chemicals....

 Vacuum fittings, rubber tubing

VACUUBRAND

Heavy-walled and flexible....

 Diaphragm Vacuum Pump N 860.3 FT.40.18

KNF

  • Application: Rotary evaporation, distillation, vacuum oven, centrifugal concentration
  • Flow rate 3.6 m³/h / ultimate vacuum 4 mbar abs.
  • Integrated KNF self-drying system ensures that condensate is quickly removed from the pump heads without the vacuum being altered. This significantly reduces process time and preserves the pump heads
  • Chemically resistant and thus ideal for use with extremely aggressive/corrosive gases and vapors
...

 Vacuum pump trolley, CP1 - CP2

KGW-Isotherm

Vacuum pump trolley with two condensate traps that can be operated alternately or together. The pump trolley consists of an aluminium frame mounted on lockable castors with a lower PE-shelf for a vacuum pump and a PE-top shelf which accommodates two cold traps. The condensate traps can each hold approx. 150ml. Spherical ground joints are sealed with FEP covered O-rings. Supplied without pump....

 Accessories for Vacuum Controller VACUU·SELECT and Measuring instrument DCP 3000

VACUUBRAND

...

Add to shopping cart