Thermoshakers

The Eppendorf ThermoMixer® C combines unique mixing performance with excellent temperature control to guarantee test results which are complete, dependable and reproducible.

• Eppendorf QuickRelease™ technology for simple exchange of Eppendorf SmartBlocks™
• Highest flexibility due to a broad selection of exchangeable SmartBlocks™
• Excellent mixing results through unique 2DMix-Control technology
• Heating, mixing and cooling of all common tube and plate sizes with a volume range of 5 µl - 50 ml

Temperatur range:
Minimum:	15 °C +/- 2 °C below ambient temperature
Maximum:	+100 °C
Temperature adjustment:	1-100 °C, adjustable in steps of 1 °C

By combining the mixing operation with the incubation phase, reaction process times and operator workload are reduced and efficiency of many procedures is increased, resulting in a higher throughput.

• temperature range: +5 to 100 °C
• uniformity at 37 °C: ± 0.1°C
• shaking speed: 250rpm to 1400 rpm
• timed shaking operation: 1 min to 96 hours
• rapid heat-up
• continuous or timed operation, with alarm buzzer and automatic switch-off facility
• incl. interchangeable block
• mixing and incubation phases are combined reducing reaction processing times

Scope of supply: Thermoshaker with one block as indicated. Further blocks on request.

Accessories Accessory blocks for Microtube thermoshaker PHMT Alternative Block thermostats PCH-1 / PCH-2 / PCH-3 Alternative Microplate thermoshaker PHMP / PHMP-100 / PHMP-4

Exchangeable blocks:
Flexibility has never been this easy. Eppendorf offers a variety of SmartBlocks™ for tubes from 0.5ml to 50ml.

• Fast and simple block exchange due to Eppendorf Quick Release
• Optimized block design guarantees maximum temperature transfer to the sample

Transfer Racks:

• Autoclavable transport aid for tubes from 0.5 to 2.0 ml
• For transferring up to 24 tubes in / from the heating block at the same time
• Offers protection against burns when transferring hot samples

SmartExtender:
A heatable frame/attachment for mixer, with separate temperature control (3 °C above RT to 110 °C), for simultaneous operation at two different temperatures.

• Enables 2 incubations at the same time

Accessories Eppendorf ThermoMixer™ F0.5/F1.5/F2.0/FP Accessories  Accessories Cooling / Heating block Eppendorf ThermoStat C

Eppendorf ThermoTop^® with condens.protect^® technology avoids condensation and improves temperature uniformity.
Lid for Eppendorf Thermomixer ™ F1.5 and FP, for Eppendorf Smart Blocks ™ 0.5-2.0 mL, plates, PCR 96 and PCR 384

Accessories BlockThermostats TH 21 / TK 23 Accessories HeatingThermoMixer MHR 13 Accessories HeatingThermoMixer MHR 23 / MHL 23 Accessories

Accessories Microtube thermoshaker PHMT

Accessories Thermoshaker PCMT for microtubes and PCR plates

The Block Thermostats are used for tempering of solutions in closed reaction tubes and plates. They stand out due to their high temperature accuracy as well as their various fields of application thanks to over 30 different exchangeable blocks.

Specifications Thermostats:	HeatingBlock TH 21 // Heating/CoolingBlock TK 23
Temperature operation range:	Amb. +3°C to +130°C // Amb. -16°C to +90°C
Temperature adjustable range:	0°C to +137°C // -10°C to +105°C
Accuracy/ resolution:	±0.1°C / 0.1°C // ±0.3°C / 0.1°C
Max. heating time:	9.5°C / min // 4°C / min
Max. cooling time:	-- // 7°C / min
Dimensions (W x D x H):	220 x 330 x 109mm // 220 x 330 x 144mm
Capacity:	2 exchangeable blocks (not included)
Weight (with block / blocks):	approx. 3.5kg // approx. 7.5kg
Electrical heating/ cooling power:	350W // 130W
Supply requirements:	230V, 50Hz
Easy Control // Smart Control:	Timer 19h 59min // 30 program steps

Accessories Exchangeable blocks for Thermomixers and BlockThermostats Accessories Accessories for ThermoMixers and BlockThermostats Successor  Alternative Digital Dry Bath AccuBlock™Mini Alternative Dry Baths, AccuBlock™ Alternative Block thermostats PCH-1 / PCH-2 / PCH-3 Alternative Block thermostats,QBD and QBH series Alternative Block Heaters, analogue and digital, BH-200 series Alternative

The Thermal Shakers and Cooling Thermal Shakers are designed for applications that require consistent and precise results. With heating, cooling and shaking capabilities. These shakers use interchangeable blocks to accommodate a wide variety of tubes and microplates. The easy-to-use, 4.3", colour, LCD touch screen allows the user to save and visibly track progress through the live status bar for five user defined programs, each with five individual steps. The unit"s enhanced electronics and dual temperature sensors provide accurate, dependable temperature settings across the operating range.

• 4.3" colour LCD touch screen display provides an intuitive interface
• Rapid heating, cooling and high speed shaking ability
• Internal memory stores five separate 5-step programs, unlimited with USB
• Temperature ramp rate, 0.5 °C steps
• Single Point Calibration Mode
• Pulse Mode Feature
• Maximum Temperature Limiting Function
• Hot Top Indicator
• Audible Alarm

Scope of supply: Thermal Shaker incl. 1.5 ml block, clear rack and cover

Specifications
Temperature range Thermal Shaker:	4 °C above ambient up to 100 °C
Cooling Thermal Shaker:	17 °C below ambient up to 100 °C
Temperature Accuracy Thermal Shaker:	± 1 °C from 20 °C to 45 °C ± 2 °C above 45 °C
Cooling Thermal Shaker:	± 0,5 °C from 20 °C to 45 °C ± 2 °C below 20 °C and above 45 °C
Speed / Accuracy :	300 to 3000 rpm / ±2 %
Timer:	1 min to 99 h, 59 min
Orbit:	3 mm
Cooling rate above ambient: below ambient:	2 to 3 °C/min 0.5 to 1.0 °C/min
Heating rate:	5 °C/min
Permissible ambient conditions:	5 to 35 °C
Dimensions (L X W X H):	260 × 248 × 132 mm
Weight:	5.4 kg
Power supply:	230 V, 50/60 Hz

Accessories Blocks for Benchtop Shaking Incubators Accessories Accessories for Benchtop Shaking Incubators

For cooling, heating and mixing of samples.

Specifications	MKR 13 // MKR 23
Temperature operation range:	Amb. -16°C to +100°C // Amb. -11°C to +70°C
Temperature adjustable range:	-10°C to +105°C // 0°C to +80°C
Accuracy/resolution:	±0.1°C / 0.1°C // ± 0.3°C / 0.1°C
Max. heating time:	6°C / min // 3.5°C / min
Max. cooling time:	12°C / min // 6.5°C / min
Shaking frequency:	200 to 1500rpm // 200 to 1200rpm
Orbit:	3mm orbital
Dimensions (W x D x H):	220 x 330 x 144mm
Capacity:	1 exchangeable block // 2 exchangeable blocks (not included)
Weight (with block / blocks):	9kg // approx. 9.5kg
Electrical heating/cooling power:	130W // 200W
Supply requirements:	230V, 50Hz
Smart Control:	30 program steps, short mix, interval shaking

Alternative Microtube thermoshaker PHMT Alternative Microplate thermoshaker PHMP / PHMP-100 / PHMP-4 Alternative Shaking Incubators VorTemp™ 56 / 1550 Alternative