Samplers, Solids

White or red high-impact polystyrene plastic. Red colored scoops reduces the chance of residual sample staying in the scoop or the scoop being accidently left behind in a sample.

• Individually sealed and sterilised in a polyethylene bag
• Long handle increases the distance between the hand and the sample
• Scoop is suitable for use as weighing boat
• Food-safe
• Lot stamped for accurate lot tracing
• With certificate of sterilisation

Sterile laboratory bottle for use in laboratories and chemical handling areas. Good product presentation due to crystal-clear PET. Space-saving and absolutely leakproof. Ideal for storing and packing liquids.

• Sterile SAL 10^-3 (according to ISO 11137)
• With tamper-proof closure
• With moulded-in raised graduation

White. Due to their long, ergonomic and solid handles and pointed blades they can be easily pierced into paper and plastic bags. The spatulas are ideal for sampling of powder, granules and pastes. The spatulas are also available with a transparent sheath to close them immediately after the sampling procedure to secure a sterile and contamination-free sample.

• Individually packed
• SteriPlast^®additionally gamma-sterilized
• Production, assembling and packaging acc. to Cleanroom class 7 (10000)
• According to EU food and FDA guidelines

Alternative Disposable spatulas LaboPlast® Bio / SteriPlast®Bio, Green PE

Single or double cotton bud. Wooden, PP or paper applicator.
WA 1-l, WA 1 D: Calibrated wooden rod with minimum diameter tolerances.
WA 1s, WA 1s PL, WA 1s 2x, WA 1s 25x, WA 2 PLs: Single, double or 25 pieces packed in peel-pack, EO-sterilized.
WA 7, WA 7 PL: Double cotton bud.
WA P: Flexible, bendable

Alternative Swabs Alternative Cotton Swabs, Gynaecology

White. They are ideal for sampling of powder, granules and pastes. The scoops are also available with transparent cover to close them immediately after the sampling procedure to secure a sterile and contamination-free sample.

• Individually packed
• SteriPlast^® additionally gamma-sterilized
• Production, assembling and packaging acc. to Cleanroom class 7 (10000)
• According to EU food and FDA guidelines

Alternative Disposable scoops LaboPlast® Bio / SteriPlast®Bio, Green PE

White/plain or coloured with labelling field . close-ithas a sandwich-type structure (aluminium/ paper) and seals the container hermetically (vapour barrier). The rear of the label is coated with a powerful adhesive. This means that close-it sticks firmly to most commercial containers, even to surfaces coated with fine powder, slightly moist or even frozen surfaces where conventional labels or adhesive tape will not stick.

close-it food & pharma ensures aswell the necessary success when resealing sample openings, as it reliably prevents products from escaping after sampling. The adhesive complies with the European guidelines for foodstuffs and FDA guidelines. Just like the original, close-it food & pharma has a barrier layer of aluminium foil, which makes the close-it food & pharma perfectly suited to sampling foodstuffs, pharmaceuticals, cosmetics, food additives, even frozen goods - any applications in which the product must not be contaminated by contact with the adhesive.

Sponges and swabs designed specifically for microbial surface sampling. 3M™ Sponge-Sticks are available in wet or dry formats, to fit many applications. The 1.5" x 3" 3M™ Sponge-Stick allows sampling without directly handling the sponge.

In numerous situations, rapid and contamination-free samples have to be taken. DispoSamplers are perfect for this application. They are cleanroom-manufactured, individually-packed and always ready-to-use. Avoid expensive decontamination or cleaning of soiled samplers. Gamma-sterilised versions are also available.

ViscoDispo: For high viscosity-media up to 100000 mPas.
LiquiDispo: For liquids and slightly viscous media.
DispoPipette: For taking all-layer and target-point samples from low viscosity-media.
DispoTube: For taking all-layer and target-point samples from liquids.

Alternative Disposable samplers for solids, HDPE

White. They are ideal for sampling of powder, granules and pastes. The LaboPlast^® Bio / SteriPlast^®Bio products are entirely made of renewable resources. Not only with regard to quality but also with regard to its characteristics for high-quality sampling, it is perfectly comparable with conventional polyethylene.

• Individually packed
• SteriPlast^® Bio additionally gamma-sterilized
• Production, assembling and packaging acc. to Cleanroom class 7 (10000)
• According to EU food and FDA guidelines

Alternative Disposable scoops LaboPlast® / SteriPlast®, PS

Universal powder and granules sampler collector made of AISI 316 stainless steel. Developed especially for milk powder samples, conforms to standards of DIN and IDF (Int. Dairy Federation). The collector is inserted into bags or casks and the sample is removed using a semi-circular profile lance. Autoclavable.

Lock seal close-it and close-it food & pharma please order separately.

Accessories Control seals for sampling close-it Alternative Sampler Silo Drill, aluminium or stainless steel V2A Alternative StickProof Sampler, stainless steel

Sampler for free flowing, bulk goods up to approx. 1cm diameter. This makes it possible, for example, to remove hazel nuts, blends of tea, grain or similar items from large sacks.
Operation: Insert Tubes into a sack to the desired sampling depth, while keeping the collection tube closed using your hand. When you take away your hand, the sample flows directly through the open tube into the container or sampling bag beneath it.

• choice of 2 lengths, 40 cm and 80 cm
• also for coarse-grained bulk goods
• AISI 316 stainless steel
• corresponds to ISTA standard for seed lengths of 10 mm and 5 mm

Lock seal close-it and close-it food & pharma please order separately.

Accessories Control seals for sampling close-it Alternative Sampler Silo Drill, aluminium or stainless steel V2A Alternative StickProof Sampler, stainless steel

If a container opening is closed with Seal-it, then the container cannot be opened without destroying the seal-it label. Seal-it is additionally provided with several cross-perforations which immediately tear when manipulated like a motorcar tax disc. Seal-it can be used to securely seal bottles, sample bags, sacks, specimen bags, envelopes, etc. The white labelling field on the seal-it can be written on with all conventional writing tools with, for example contents information, sampling date, name of operator, etc.

• Clear identification via numbers in sequence
• Integrated control label with the same number, for accompanying documents
• 500 consecutively numbered labels in each roll
• Format 178mm long, 30mm wide
• Tear-off perforation for each label

Suitable for removing bulk materials from sacks or large bags and depositing them directly into sample bottles. Simple to use and clean. Crevice-free to prevent sample residues causing cross-contamination which could affect subsequent sample results.
Complete with cleaning brush and two 250 ml sample bottles.

Lock seal close-it and close-it food & pharma please order separately.

Accessories Control seals for sampling close-it Accessories Wide-necked bottle, LDPE, transparent Accessories LLG-Wide-mouth bottles, with screw cap, LDPE Accessories Accesories for UniSampler Alternative Sampler Silo Drill, aluminium or stainless steel V2A Alternative StickProof Sampler, stainless steel

In numerous situations, rapid and contamination-free samples have to be taken. DispoSamplers are perfect for this application. They are cleanroom manufactured, individually packed and always ready to use. Avoid expensive decontamination or cleaning of soiled samplers. Gamma sterilised versions are also available.

MultiDispo: For free-flowing powders and small-grain granulates. Easy emptying through opening in the handle.
ZoneDispo: For free-flowing powders and small-grain granulates. Collected sample can be transported in closed sampler.
TargetDispo: For taking target-point samples from powders and granulates.
PowderDispo: For taking cross-section samples of powdery or slightly cohesive substances.
DispoPicker: For taking cross-section samples from powders and small-grain granulates. With closed tip.
DispoLance: For direct removal and filling of free-flowing powders and small-grain granulates.
MicroDispo: For free-flowing powders and small-grain bulk materials. For small sample quantities (10 ml).

Alternative Disposable liquid samplers, HDPE

For sampling bulk goods of all types. Available in various different lengths and materials:
Multi-sampler: With several closed chambers for multi-point sampling from several predetermined sampling depths. Available in stainless steel V4A/PTFE, stainless steel V4A/V4A or aluminium. Tube diameter: 25mm.
All-layer-sampler: with open inner tubes for cross-sectional sampling through all layers of the sample. Emptied via the open tube end of the sampler. Available in stainless steel V4A or aluminium. Tube diameter: 25mm.
Jumbo-sampler: generally as the All-layer-sampler with open tube end. With a tube diameter of 50 mm, ideal for coarse grains and lager quantities. For multi point sampling the chambers can be seperated by PTFE separators.
Uno-sampler: With a closed chamber, for target samples from a pre-determined sample depth.

Easy emptying with the emptying device.

Lock seal close-it and close-it food & pharma please order separately.

Accessories Emptying device, stainless steel Accessories Zone sampler, accessory cleaning brush, PVC/stainless steel Accessories Control seals for sampling close-it

White. Due to their long, ergonomic and solid handles and pointed blades they can be easily pierced into paper and plastic bags. The spatulas are ideal for sampling of powder, granules and pastes. The LaboPlast^® Bio / SteriPlast^® Bio products are entirely made of renewable resources. Not only with regard to quality but also with regard to its characteristics for high-quality sampling, it is perfectly comparable with conventional polyethylene.

• Individually packed
• SteriPlast^®Bio additionally gamma-sterilized
• Production, assembling and packaging acc. to Cleanroom class 7 (10000)
• According to EU food and FDA guidelines

Alternative Disposable spatulas LaboPlast®/ SteriPlast®, PS

Emptying zone samplers were often a matter of patience and a steady hand. Now it"s easier and faster with Bürkle"s emptying device. Just lay the zone sampler onto the stainless steel stand, adjust the funnels along the sample chambers, and, after turning the sampler, the media will directly flow into the containers below. Quality materials ensure that the emptying device is autoclavable.

For taking bulk good samples from silos. Using the extension rods, samples can be taken from depths down to 3.5 m.

• Food-safe
• Autoclavable

The sampler is suitable for deep-frozen products in the food industry and semi-solid substances. With the robust hollow borer, with sharp sawing crown, a cross-sectional sample of up to 20 cm length can be cut out.

• Stainless steel V4A (1.4404/1.4571)
• Sterilisable
• Food-safe

Scope of supply: Borer, borer head for use in conventional drills and rod for pressing the cylindrical sample out of the borer head

Manually-operated reels

• High winding capacity of up 150 m for cable 2 mm dia.
• Reel width: inner 44 mm, outer 55 mm, reel diameter: inner 100 mm, outer 180 mm
• Please order the required lowering cable separately

Lowering cables

• For dipping bottles and immersion cylinders, matching manually-operated drum reels made of various materials
• Tensile load max. up to 10 kg

For pigments and pastes and agglomerating bulk goods.

• With half-open flute 50% for heavily stiching products
• With one-quarter-open flute 25% for lightly stiching products

Alternative Sampler Silo Drill, aluminium or stainless steel V2A Alternative StickProof Sampler, stainless steel

If bulk goods are transported over long distances (e.g. in trucks, railway goods wagons), separation may occur. Taking the sample just from the surface therefore leads to the wrong result. Representative samples from all layers of the silo can be taken with the SiloDrill. The SiloDrill fits through all standard openings with its diameter of 90 mm.

• Of stainless steel AISI 304 (1.4301) or aluminium
• Standard length 150 cm, extendable in increments of 100 cm, max. 350 cm
• Scraper edge for cohesive substances
• Drill tip with drilling blades for easy boring

Accessories Transport case Alternative Core Sampler Quick Picker, Stainless steel V4A or PP Alternative StickProof Sampler, stainless steel

Sample spatula made of stainless steel V4A (1.4404). The highly stable and solid design of the spatula allow it to pierce solid substances or sacks and BigBags. The spatula is made of premium stainless steel, high-gloss polished and completely welded, therefore completely free of undercuts. It is ideally suited for taking samples of powders, granulates and pasty media, especially in food and pharmaceutical applications. Autoclavable, flame sterilisation.

For pharmaceutical powders. Electropolished, stainless steel V4A. Supplied with fixing clip and 100 x PE sample bags 120 x 170 mm.

The particularly fine point can be inserted easily and deeply. Sample volumes can be varied (up to approx. 50 cm³) via the tapered sampling orifice. StickProof is manufactured from one piece, without edges, grooves or crevices for perfect and easy cleaning. The sample can be filled directly into sampling bags.

Lock seal close-it und close-it food & pharma please order separately.

Handle dia.:	25 mm
Drill dia.:	20 mm
Chamber length:	120 mm

Accessories Control seals for sampling close-it Alternative Sampler Silo Drill, aluminium or stainless steel V2A Alternative Core Sampler Quick Picker, Stainless steel V4A or PP

Vivaspin™ ultrafiltration spin columns for minimal handling and reduced sample loss. Specially designed for rapid, non-denaturing concentration and desalting of proteins and other biological samples. Vertical polyethersulfone (PES) membrane minimizes membrane clogging to ensure high flow rates.

Features & Benefits:

• Dead-stop technology: samples are not concentrated to dryness and allows direct concentrate recovery
• pH compatibility from pH 1 to 9
• Polycarbonate tube design for minimal protein adsorption
• Suitable for sample volumes from 100 µl to 20 ml with a molecular weight cutoff value of Mr 3000 to 100 000