Samplers, Liquids

TeleScoop is a versatile sampling system with exchangeable tools for a wide range of applications. The tools (angular beaker, pendulum beaker, bottle holder, stainless steel beaker and dip net e.g. for taking solid and organic samples from water courses) are attached to the rod by a practical snap-in joint. Ideal for sampling from baths, tanks, shafts, open water courses etc. Sampling depths down to 6M can be reached with the adjustable telescopic aluminum rod.
With individually variable angle adjustment.

Alternative TeleScoop Telescopic Rods, aluminium Alternative Pendulum beaker for TeleScoop, PP Alternative Bottle holder for TeleScoop, PP/PA Alternative Catch nets for TeleScoop, PVC/PA - PP/PA Alternative Beaker for TeleScoop, stainless steel V2A

TeleScoop is a versatile sampling system with exchangeable tools for a wide range of applications. The tools (angular beaker, pendulum beaker, bottle holder, stainless steel beaker and dip net e.g. for taking solid and organic samples from water courses) are attached to the rod by a practical snap-in joint. Ideal for sampling from baths, tanks, shafts, open water courses etc. Sampling depths down to 6M can be reached with the adjustable telescopic aluminum rod.
The individual rods have been provided with an end stop. This means that one rod cannot accidentally slip out of another rod. The telescopic rods cannot be rotated radially.

• Increased rigidity by using cold-rolled profile rod
• Springs made of stainless steel

Accessories Angular, sample beakers, angled for TeleScoop, PP Accessories Pendulum beaker for TeleScoop, PP Accessories Bottle holder for TeleScoop, PP/PA Accessories Beaker for TeleScoop, stainless steel V2A Accessories Catch nets for TeleScoop, PVC/PA - PP/PA

Scaled sampling tube manufactured in a clean room specially designed for disposable use. Due to the blue colour, it is also perfect for use in the food, animal feed and pharmaceutical industries. After sampling, the container can be closed and is leakproof. DispoDipper is completely manufactured in one piece and can be used for sampling and subsequent transport of the sample in one device. In this way, cross-contamination or sample impurities are almost impossible. For sampling, first remove the cover at the predetermined breaking point. Then take the sample with the sample container and close it securely. After sampling, the handle at the predetermined breaking point can be detached from the sample container. This allows for easy and space-saving transport of the sample.

• Individually packaged and optionally sterilised by gamma rays (SteriPlast^®)
• Production and packaging according to clean room class 7
• Complies with EU food requirements and FDA regulations

For aggressive liquids, complete with strong handle made of polypropylene.

TeleScoop is a versatile sampling system with exchangeable tools for a wide range of applications. The tools (angular beaker, pendulum beaker, bottle holder, stainless steel beaker and dip net e.g. for taking solid and organic samples from water courses) are attached to the rod by a practical snap-in joint. Ideal for sampling from baths, tanks, shafts, open water courses etc. Sampling depths down to 6M can be reached with the adjustable telescopic aluminum rod.
Automatically swings into a vertical position. Nothing can be spilt. Ideal for deep and narrow shafts.

Alternative TeleScoop Telescopic Rods, aluminium Alternative Angular, sample beakers, angled for TeleScoop, PP Alternative Bottle holder for TeleScoop, PP/PA Alternative Catch nets for TeleScoop, PVC/PA - PP/PA Alternative Beaker for TeleScoop, stainless steel V2A

TeleScoop is a versatile sampling system with exchangeable tools for a wide range of applications. The tools (angular beaker, pendulum beaker, bottle holder, stainless steel beaker and dip net e.g. for taking solid and organic samples from water courses) are attached to the rod by a practical snap-in joint. Ideal for sampling from baths, tanks, shafts, open water courses etc. Sampling depths down to 6M can be reached with the adjustable telescopic aluminum rod.
Holds bottles up to max. 88mm diameter incl. 750ml bottle (Spare bottle Cat. No. 9.072 987). Suitable for plastic and glass bottles. With universal quick-action clamping strap.

Alternative TeleScoop Telescopic Rods, aluminium Alternative Angular, sample beakers, angled for TeleScoop, PP Alternative Pendulum beaker for TeleScoop, PP Alternative Catch nets for TeleScoop, PVC/PA - PP/PA Alternative Beaker for TeleScoop, stainless steel V2A

A new, easy-to-handle sample taking system for manual sampling.
General purpose thanks to

• quick and easy exchange of the sample taking equipment
• simple change by pressing the spring mechanism
• extremely strong fiber glass telescopic poles, non-corrosive
• for up to 20 different sample taking devices
• four different fiber glass telescopic poles extensible from 1.5m up to 6.00m in length

Please order telescopic poles separately.
Very robust telescopic pole, ideal for sample taking. Fiber glass makes it almost indestructible and non-corrosive. Comfortable to carry even at low temperatures. Simple extension and adjustment mechanism. You can change the length easily by a quarter rotation. (Pic. 3). At telescope poles of 3,85 to 6 meter the length could be easily changed by using the clamp (Pic. 2). Comfortable use of spring mechanism. This type can take all samplers and catchers with universal connecting part.

Alternative Waterlanding net Alternative Wire sieve net Alternative Dip net Alternative Vegetation scraping net Alternative Plankton net Alternative Pendulum beaker, stainless steel

DIN EN ISO 15528. For liquids. For contamination-free sampling. Practical push button, single-handed operation. Suitable for point, cross-sectional, and bottom sampling. Ideal for sampling from open and closed drums, kegs, tanks, silos, water sources (ponds, lakes, streams, rivers). Suitable for all commercial kegs and drums with openings of at least 32 mm diameter. All surfaces are non-porous and crevice-free preventing accumulation of dirt. Only round-profile screwthreads, suitable for food hygiene applications, are used. Simple to dismantle and clean.

Alternative

TeleScoop is a versatile sampling system with exchangeable tools for a wide range of applications. The tools (angular beaker, pendulum beaker, bottle holder, stainless steel beaker and dip net e.g. for taking solid and organic samples from water courses) are attached to the rod by a practical snap-in joint. Ideal for sampling from baths, tanks, shafts, open water courses etc. Sampling depths down to 6M can be reached with the adjustable telescopic aluminum rod.
Beaker with scraper for pasty or powdery materials.

• With lip for scraping
• Sterilisable

Alternative TeleScoop Telescopic Rods, aluminium Alternative Angular, sample beakers, angled for TeleScoop, PP Alternative Pendulum beaker for TeleScoop, PP Alternative Bottle holder for TeleScoop, PP/PA Alternative Catch nets for TeleScoop, PVC/PA - PP/PA

In numerous situations, rapid and contamination-free samples have to be taken. DispoSamplers are perfect for this application. They are cleanroom-manufactured, individually-packed and always ready-to-use. Avoid expensive decontamination or cleaning of soiled samplers. Gamma-sterilised versions are also available.

ViscoDispo: For high viscosity-media up to 100000 mPas.
LiquiDispo: For liquids and slightly viscous media.
DispoPipette: For taking all-layer and target-point samples from low viscosity-media.
DispoTube: For taking all-layer and target-point samples from liquids.

Alternative Disposable samplers for solids, HDPE

The DispoLadle is a sampling scoop specially designed for disposable use. The scaled scoop with embossing can be used for measuring. It shows contents in increments of 10 ml, up to 200 ml. An ergonomic handle and a spout on both sides for right or lefthand operation make handling simple and easy.

• Cleanroom manufactured
• Individually packaged
• Optionally sterilised by gamma rays

Manually-operated reels

• High winding capacity of up 150 m for cable 2 mm dia.
• Reel width: inner 44 mm, outer 55 mm, reel diameter: inner 100 mm, outer 180 mm
• Please order the required lowering cable separately

Lowering cables

• For dipping bottles and immersion cylinders, matching manually-operated drum reels made of various materials
• Tensile load max. up to 10 kg

For various bottles with neck diameters from 10 to 80 mm and volumes of max. 1000 ml. With adjustable click-in angle from 0 to 180°.

Accessories Fiber glass telescopic pole INGENIOUS Alternative All purpose clamp, stainless steel with silicon coating

For sampling from the water surface.
Adjustable clamping device and end rod made of stainless steel, with choice of sample container as indicated. For sampling in accordance with DIN 38409 to H14/AOX a 1 litre borosilicate beaker is required. With 3-part handle, which is continuously adjustable between 1 and 3,75m. Ideal for use at sites which are difficult to access.

TeleScoop is a versatile sampling system with exchangeable tools for a wide range of applications. The tools (angular beaker, pendulum beaker, bottle holder, stainless steel beaker and dip net e.g. for taking solid and organic samples from water courses) are attached to the rod by a practical snap-in joint. Ideal for sampling from baths, tanks, shafts, open water courses etc. Sampling depths down to 6M can be reached with the adjustable telescopic aluminum rod.
Ideal for sampling from basins, tanks, shafts, open waters etc. The telescopic aluminium rods TeleScoop allow sampling up to 6m depth.

• For industries and water treatment
• Mesh width: 2mm up to 5mm
• Depth cath net, net depth: 250mm

Alternative TeleScoop Telescopic Rods, aluminium Alternative Angular, sample beakers, angled for TeleScoop, PP Alternative Pendulum beaker for TeleScoop, PP Alternative Bottle holder for TeleScoop, PP/PA Alternative Beaker for TeleScoop, stainless steel V2A

Grey. For sampling aggressive liquids, e.g. acids, alkalis, detergents. The samples are drawn directly into the screw-on original sampling bottle. The tamperproof bottle closure of these bottles with original safety ring ensures unadulterated sample transport.

• Resistant to acids and alkalis
• Incl. sample bottle 1000 ml
• Extension rod 100 cm is available as accessory

Accessories ChemoSampler, accessory extension rod

Gravimetric method for 5 g cream, with 2 openings, frosted label on bulb, complete with rubber stoppers and glass beaker without hole.

High-performance plates for manual or automated applications. Suitable for sample storage and preparation, bacteria and yeast cultivation, DNA and RNA isolation, protein analysis and plasmid purification.

• Clear wells
• Frame, white or coloured
• High-contrast, alphanumeric lettering
• Autoclavable (121 °C, 20 min)
• Centrifugation resistance up to 6000 × g
• Rounded RecoverMax^®-Well-Design
• Elevated well frames for reliable sealing, even with heat sealing
• Stackable
• PCR clean: free of human DNA, DNase, RNase and PCR inhibitors or sterile

Alternative

Without openings, undercuts or crevices in which residues could collect. Pore-free finishing produced by high-quality laser welding seams. The dip sampler is sterilisable by flame sterilisation or steam sterilisation and can therefore be made completely germ-free. Complete with rod.

According to DIN 51750 pt. 2
Dipping Vessel
For sampling liquids from tanks, lorry tankers, etc. Made of brass or stainless steel AISI 304 (1.4301) for Ex areas. 1 L capacity, 82 mm diameter, 427 mm height with handle. Without lowering cable.
Operation: When the dipping vessel is lowered, the liquid constantly runs through it. By pulling back, both valves close automatically.
Emptying at the top via the open flaps.
Dipping bottle EX
For sampling flammable liquids.
For sampling category A mineral oil products, Explosion Categories IIA, IIB and IIC. Made from brass that do not produce sparks, 89 mm diameter, 443 mm height with handle, weight 3.3 kg. Without lowering cable.
Operation: 1. Lower bottle into liquid. 2. Pull the cable when the target spot has been reached and the stopper opens. 3. Sample flows in. 4. Pull up dipping bottle and remove sample. Use an electrically conductive, manually operated reel and lowering cable or chain.
Dipping bottle glass
For sewage disposal plants, sludge and water samples. Nickel-plated brass frame with glass sample bottle. 1000 ml capacity, 148 mm diameter, 330 mm high, weight 3.2 kg. Without lowering cable.
Operation: 1. Lower bottle into liquid. 2. Pull cable when target depth is reached and open stopper. 3. Sample flows in. 4. Pull bottle back up and remove sample.
Immersion Cylinders
For target spot and bottom samples of mineral oil products. Made of nickel-plated brass. Heavy, robust design (4.3 kg). Without lowering and pull cables
Target spot sample: 1. Immersion cylinder is lowered in the tank to be sampled by the manually operated reel. 2. The separate pull cable is used to open the valve when the target spot is reached and the sample then enters the immersion cylinder.
Bottom sample: 1. Lower the immersion cylinder to the bottom. 2. The weight of the immersion cylinder opens the valve automatically when the bottom is reached and the sample then enters the immersion cylinder.
Target immersion cylinder
With the Target immersion cylinder, liquid samples can be taken from a particular point. The immersion cylinder is lowered on a strong and sealed tube. When the target has been reached, a valve at the tube end is opened. This vents the immersion cylinder and fills it with the sample. The immersion cylinder is pulled up and emptied via the screw thread. Weight 2.6 kg. With 5 m venting tube. Screw off top enables easy cleaning.
Mini immersion cylinder
For sampling liquids in narrow places where access is difficult. Can also be used in curved dipping tubes and barrels with narrow openings. Capacity 50 ml, 32 mm diameter, height 180 mm, weight 330 g. Without lowering cable. Upper body unscrews for easy cleaning.

Accessories Manually-operated reels and lowering cables

In numerous situations, rapid and contamination-free samples have to be taken. DispoSamplers are perfect for this application. They are cleanroom manufactured, individually packed and always ready to use. Avoid expensive decontamination or cleaning of soiled samplers. Gamma sterilised versions are also available.

MultiDispo: For free-flowing powders and small-grain granulates. Easy emptying through opening in the handle.
ZoneDispo: For free-flowing powders and small-grain granulates. Collected sample can be transported in closed sampler.
TargetDispo: For taking target-point samples from powders and granulates.
PowderDispo: For taking cross-section samples of powdery or slightly cohesive substances.
DispoPicker: For taking cross-section samples from powders and small-grain granulates. With closed tip.
DispoLance: For direct removal and filling of free-flowing powders and small-grain granulates.
MicroDispo: For free-flowing powders and small-grain bulk materials. For small sample quantities (10 ml).

Alternative Disposable liquid samplers, HDPE

The sampler is suitable for deep-frozen products in the food industry and semi-solid substances. With the robust hollow borer, with sharp sawing crown, a cross-sectional sample of up to 20 cm length can be cut out.

• Stainless steel V4A (1.4404/1.4571)
• Sterilisable
• Food-safe

Scope of supply: Borer, borer head for use in conventional drills and rod for pressing the cylindrical sample out of the borer head

Taking samples is quick, easy, clean and practical.
With the MiniSampler, the sample liquid only comes into contact with the suction hose and the sample bottle. Cross contamination is largely prevented. Bottles can be tightly sealed immediately after the sample is taken with a tamper-evident cap.
The single use, PE suction hose can be quickly replaced, ensuring that samples are never contaminated. A new hose can be used for each sample if required. Because of its small diameter (8mm) and flexibility the hose can reach sampling areas that are otherwise inaccessible. Also suitable for viscous oils.

Scope of supply: 10 x 100 ml PE bottles, 10 m of PE suction hose (6 x 8mm), 1 hose cutter , 1 hose weight (V2A/nickel-plated brass), 20 seal-it safety seal labels, carrying case

Alternative Sampler Mini-Sampler, PTFE

UniSampler with PVC hose and hose weight made of stainless steel. For deep, hard-to-reach places. The mass of the metal tube drags the hose to any depth.

• PVC sample tubing, 2.5 m long
• Incl. 1000ml sample bottle, manual vacuum pump and adapter for sample bottle, V2A hose weight, 20 seal-it safety seal labels, supplied complete in carrying case
• Universal bottle adapter made of PVC, for bottle necks Ø 24 mm, 31 mm, 39 mm and 50 mm nominal dimension

Accessories Accesories for UniSampler Alternative Vampire Sampler

Sampler for thin to viscous liquids. Easy use with one-handed operation. With discharge funnel for safe filling of sample bottles.

A new, easy-to-handle sample taking system for manual sampling.
General purpose thanks to

• quick and easy exchange of the sample taking equipment
• simple change by pressing the spring mechanism
• extremely strong fiber glass telescopic poles, non-corrosive
• for up to 20 different sample taking devices
• four different fiber glass telescopic poles extensible from 1.5m up to 6.00m in length

Please order telescopic poles separately.
Nothing can be spilt because beaker automatically swings into a vertical position. Dimension of the beaker: 100 mm diameter, 130 mm height, 1 liter volume. With universal connecting part.

Accessories Fiber glass telescopic pole INGENIOUS Successor Plankton net Alternative Angled sample beaker, PP Alternative Angled sample beaker, stainless steel Alternative Angled sample beaker, stainless steel Alternative Waterlanding net Alternative Wire sieve net Alternative Dip net Alternative Vegetation scraping net Alternative Plankton net

A new, easy-to-handle sample taking system for manual sampling.
General purpose thanks to

• quick and easy exchange of the sample taking equipment
• simple change by pressing the spring mechanism
• extremely strong fiber glass telescopic poles, non-corrosive
• for up to 20 different sample taking devices
• four different fiber glass telescopic poles extensible from 1.5m up to 6.00m in length

Please order telescopic poles separately.
Mesh width 65 µm, robust version with sturdy aluminium ring of 200 mm diameter. The ring is covered with nylon fabric to protect the silk gauze from ripping up. With 100 ml collecting vessel (100 ml Kautex flask). Net could be opened at the botton for filling the bottles. With universal connecting part.

Accessories Fiber glass telescopic pole INGENIOUS Alternative Waterlanding net Alternative Wire sieve net Alternative Dip net Alternative Vegetation scraping net Alternative Pendulum beaker, stainless steel

For ultrapure sampling. Also suitable for viscous oils.
Complete with one PFA Sample Jar 180 ml, 5 m PTFE suction tubing (6 x 8 mm), one tubing cutter, one tubing weight (V2A/nickel-plated brass) and 20 seal-it safety seal labels in case.

Alternative Liquid sampler MiniSampler, PE

Vacuum-operated sample collector for sampling solvents and flammable liquids (Explosion Categories IIA, IIB and IIC) out of drums, tanks, road tankers, railway wagons, ships, lakes, ground water.

• Filling level control, automatic return flow and overfill protection by built-in venting valve
• Suction volume: 200 ml, suction pressure 0.5 bar and suction depth down to 4m of water
• With bottle thread GL 45 (suitable for Schott glass bottles 100 to 1000ml)
• Can be supplied with optimized, straight suction tube for simpler sampling
• Transport case for tidy transport and disposal
• Always check the chemical resistance of parts coming into contact with the sample
• When taking samples of flammable liquids, the device must be earthed

Wear protective clothing!

Scope of supply: aluminium vacuum pump, with feet (aluminium), venting valve and GL45 bottle thread, 1 x 500 ml glass bottle, 5 x 220 mm long, conductive, black PA suction tubes, 1 tubing cutter, 1 brass hose weight, 20 seal-it bottle seals, earthing cable

Specially developed for sampling class A1 flammable liquids (e.g. benzene, petrol). Glass bottles and tubing electrically connected and grounded via an earthing cable. The UniSampler "EX" was developed in cooperation with "Gütegemeinschaft Tankschutz e.V."
PTB approval D-333-009 618/00.

Operation:
1. Earth the Uni-Sampler. 2. Lower the suction hose to the desired depth. 3. Attach the adapter to the sample bottle. 4. Generate vacuum with the hand pump and collect sample. 5. Remove the filled sample bottle, seal and label.

Scope of delivery: UniSampler with 4 m sample tubing, glass sample bottle, manual vacuum pump, bottle adapter, brass hose weight and earthing cable in carry case

Ultra-pure sampler with powerful suction for viscousmedia. Specially developed for viscous substances, such as slurries, silt, wet clay and soil samples, sediments, oils, emulsions and creams. The suction flask sucks up and discharges the material. All surfaces are non-porous and crevice-free, preventing dirt accumulation. Only round-profile threads, suitable for food hygiene applications, are used. Allow easy dismantling and cleaning.

Alternative

Sponges and swabs designed specifically for microbial surface sampling. 3M™ Sponge-Sticks are available in wet or dry formats, to fit many applications. The 1.5" x 3" 3M™ Sponge-Stick allows sampling without directly handling the sponge.

The self-priming peristaltic pump is also suitable for dirty or particle-containing substances with a viscosity of max. 500 mPas. Ideal for sampling from barrels, tanks, wells, water separators, waste water and sewage treatment plants. The samples are fed directly into the sample container via the closed hose system.

• Battery-powered hose pump
• Easy cleaning and exchangeable hoses prevent impurities
• Suction depth up to 5 metres

Scope of supply: Drive unit, pump head, pump hose (30 cm, Marprene), suction hose (5 m, PE), hose connector (PP), sample bottle (250 ml, LDPE), bottle basket, two rechargeble batteries, battery charger

Accessories Wide-necked bottle, LDPE, transparent Accessories Accessories for Vampire Sampler Alternative Liquid sampler UniSampler with flexible sample tubing

Comply with DIN 12036.
Conical ground joint neck and solid glass stopper with convex base. Made of borosilicate glass 3.3.
The stoppers have two advantages:

• No bubbles are trapped at the stopper base when inserted into a filled bottle
• Less risk of breakage or cracking than conventional stoppers

A new, easy-to-handle sample taking system for manual sampling.
General purpose thanks to

• quick and easy exchange of the sample taking equipment
• simple change by pressing the spring mechanism
• extremely strong fiber glass telescopic poles, non-corrosive
• for up to 20 different sample taking devices
• four different fiber glass telescopic poles extensible from 1.5m up to 6.00m in length

Please order telescopic poles separately.
Very robust, with nylon net, for catching flees, bugs, floating particles and water insects. Mesh width 0.8 mm. With robust aluminium ring of 200 mm diameter. Double-stitched version. With universal connecting part.

Accessories Fiber glass telescopic pole INGENIOUS Alternative Wire sieve net Alternative Dip net Alternative Vegetation scraping net Alternative Plankton net Alternative Pendulum beaker, stainless steel

Sturdy bottle with wide-necked opening and screw cap. Particularly suitable for viscous media, powder, granules and pastes. Leakproof. Individual customer-specific printing possible.

Alternative LLG-Wide-mouth bottles, with screw cap, LDPE

A new, easy-to-handle sample taking system for manual sampling.
General purpose thanks to

• quick and easy exchange of the sample taking equipment
• simple change by pressing the spring mechanism
• extremely strong fiber glass telescopic poles, non-corrosive
• for up to 20 different sample taking devices
• four different fiber glass telescopic poles extensible from 1.5m up to 6.00m in length

Please order telescopic poles separately.
Robust wire sieve net, very robust and reinforced net version with crossed protection strings at the outside (to prevent the net from deforming). This landing net also has a reinforced net at the edges and therefore allows you to catch small animals directly off the ground. A possible bending is avoided by the strong and simple construction. Net diameter of 200mm, mesh width 1.5mm. With universal connecting part.

Accessories Fiber glass telescopic pole INGENIOUS Alternative Waterlanding net Alternative Dip net Alternative Vegetation scraping net Alternative Plankton net Alternative Pendulum beaker, stainless steel

• 8 sizes, standard and sterile.
• Maximum of safety and repeatability as all tips are individually and mechanically tested.
• Guaranteed purity is tested and confirmed by independent testing laboratories. Sterile, pyrogen-free, DNA-, RNase- and ATP-free.
• A quality certificate per lot can be obtained upon request.

Suitable for use together with ripette^®, Multipette^® 4780, HandyStep^®, Minilab 100/101, Stepmate, EasyStep, Distriman^® and HandyStep^® electronic.

Please note: Dispenser tips 25ml and 50ml cannot be used without adapter. If necessary, please order Cat.-No. 6.310 203 or 6.310 548 separately.

Accessories Accessories for manual serial dispenser

Transparent. These disposable samplers were developed especially for sampling of strongly adhesive liquids to avoid a complicated cleaning process. PE provides a surface that resists adhesion of the sample material, minimising sample retention on the dip sampler.

Tips for Micro-Sampler.

Resistant to acids and alkaline solutions. Permits the extraction of samples up to a depth of 2000 mm e.g. from tanks, silos or tankers.

Made of clear polystyrene (PS) or transparent polypropylene (PP).

Accessories

For taking free-flowing or self-flowing samples from bulk goods. Emptying takes place via the tip. The sample can be emptied directly into the sample container without having to disassemble the EasySampler, in order to obtain a mixed sample for instance. For sample opening from 52 mm Ø.

• Food-safe
• Autoclavable

Extension rod.

Suitable for Mettler-Toledo HX/HS, HC and HE series moisture analysers.

Well Scoop Thermometer and Tank Thermometer for sampling and temperature measurement at the same time.

Please order thermometer insert and armour separately.
Calibratable. Immersion depth - total.

Accessories