Ultrasonic homogenisers

Titanium probes.
For connection to stepped horns/booster horns.

Accessories Probe extentions for Sonotrodes

Titanium, approx. length 100 mm.

MS0.5 - MS10: Sonotrodes made of titanium, approx. length 80 mm.
T1: Timer from 00:00 to 99:59 (min:sec).

Booster horns, stepped horns for connection of interchangeable sonotrodes (probes). Further booster horns are available on request.

For SONOPULS HD 2070.2, HD 2200.2, HD 4100 and HD 4200. For indirect ultrasonic irradiation.

• BR 30 cup booster enables highly intensive sonication of small samples, disruption of cells or sonification of pathogenic or toxic substances.
• EH 3.1: Microtube holder for BR 30 for simultaneous sonification of pathogenic and toxic materials with: 1 perforated disc for 3 x 1.0 ml or 2.0 ml microtube cups each, 1 perforated disc for 3 x 0.5 ml microtube cups each, 1 perforated disc for 8 x 0.2 ml RPCR cups each

Specifications
Beaker capacity:	12ml
Int. height:	15mm
Int. diameter:	32mm
Max. ultrasound intensity:	3100 W/L
Material:	Titanium alloy (TiAl6V4)

Stainless steel, sealed, vibration-free reaction vessel with cooling jacket. For direct ultrasonic irradiation. For connection to SH 70 G or SH 213 G with TT 13. For HD 2070.2 and HD 2200.2. homogenisers. Flow rate up to 30 L/hr.

Alternative Glass sample vessels, Borosilicate glass 3.3 for Ultrasonic homogenisers SONOPULS Alternative Ultrasonic processing vessels for SONOPULS Ultrasonic homogenisers

For indirect ultrasonic irradiation

• Flow-through standard horn FZ 5 G with external screwthread and titanium flat tip TT 13 FZ
• Flow-through standard horn FZ 7 G with external screwthread and titanium flat tip TT 13 FZ

For direct ultrasonic irradiation.

Alternative Flow-through cell for SONOPULS Ultrasonic homogenisers, stainless steel Alternative Ultrasonic processing vessels for SONOPULS Ultrasonic homogenisers

Stainless steel.
For covering bath tanks, as outlined below.

PTFE sleeve adapters for mounting probes into standard ground joint vessels. For use with HD 2070.2 / 2200.2 / 4100 / 4200 / 4400 homogenisers.
NA 29 G: for vessels with standard ground joint 29/32 and for horns SH 70 / 213 G / 100 G / 200 G
NA 45 G: for vessels with standard ground joint 45/40 and for horns SH 70 / 213 / 219 / 225 G / 200 G / 400 G

Titanium sonotrodes.
For connection to stepped horns/booster horns.

Accessories Probe extentions for Sonotrodes

Titanium sonotrodes.
For connection to stepped horns/booster horns.

Accessories Probe extentions for Sonotrodes

Sonotrodes made of titanium. With M6x0.75 male thread. Autoclavable.

Sonotrodes S26d2D and S26d7D with seal for closed systems for use with flow cell reactor.

The USBB series has been developed especially for the noise insulation of ultrasonic baths in the laboratory.
Advantages:

• High noise reduction up to 30dB(A). That means a drop in noise of 90 to 95%
• Available in four different sizes for mostly all ultrasonic baths, compatibility list for Bandelin Ultrasonic baths on request
• The cover can be completely opened, so the removal of the basket is very easy to handle
• Smooth and easy handling of the cover, no additional space needed when opening, so the box can be placed and operated under extractor hoods
• Control panel stays visible. Thanks to the transparent front, the progress of the washing program can be observed anytime
• Equipped with fast access openings on the front and both sides to operate the ultrasonic bath or to drain the cleaning agent
• Integrated fan to remove vapors
• Recessed grips on the sides for easy transportation
• Powder coated, robust and easy cleanable surface

Digital ultrasonic processor, 200 watts, for handheld and stand-mounted use, frequency 26kHz (auto-scan), amplitude 20-100%, pulse 10-100%, titanium horn Ø10mm (max. amplitude at horn 70µm), colored touch-screen, amplitude or power control, countdown (timer): 0.1sec to 99 days, shutdown when final energy input reached (Ws, Wh, kWh), autom. Calibration of the amplitude-dependent idle power, data recording: amplitude, power, time, temperature on internal SD/USB ComboCard (1GB), display and remote control via browser on PC/MAC without software installation, remote control via PLC, with temperature sensor, temperature indication: °C/°F (-50°C to 200°C), temperature monitoring, dry running protected, sample illumination, anti-bacterial plastic housing, simplified exchange sonotrodes, power supply 100-240V~, 50-60Hz, IP41 grade, set weight: 1300g, Carrying case incl. fixture for stand STH-12 and 3m network cable

Accessories  Accessories  Accessories Sonotrodes for ultrasonic homogenisers UP200Ht / UP200St, titanium Accessories  Accessories  Accessories  Alternative Ultrasonic Processor UP50H/UP100H

Suitable for homogenising, desagglomerating, emulsifying, suspending, accelerating chemical reactions or disruption of cells, bacteria, fungi or spores. The devices of the SONOPLUS 4000 series are characterised by optimised process times and quickly available reproductive results.

• LC display for amplitude, pulse level, time and power
• Pulse mode, AMPLICHRON^®-circuit
• Data memory
• Batch mode/sequencing
• Temperature display and measurement
• Remote control via PC RS 232
• Interference suppression

Also available as medicine product according to the guideline for in-vitro-diagnostica 98/79/EG.
For volumes from 0.5 to 100 ml. Ready-to-operate set for volumes from 0.5 to 20 ml consisting of:

• HF generator GM 4200
• Ultrasonic converter UW 50
• Titanium probe TS 102, diam. 2 mm

Further Titanium probes with diam. 3 mm, 4.5 mm and 6 mm available on request.

HF generator Dimensions (W x D x H):	GM 4200 150 x 335 x 220 mm
Converter	UW 50
Dimensions (diam. x L):	45 x 175 mm
Ultrasonic nominal power:	max. 50 W

Accessories Sonotrodes for ultrasonic homogenisers SONOPULS HD 5050 / SONOPULS HD 4000 series Accessories Ultrasonic homogenisers, SONOPULS, accessories

Suitable for homogenising, desagglomerating, emulsifying, suspending, accelerating chemical reactions or disruption of cells, bacteria, fungi or spores. The devices of the SONOPLUS 4000 series are characterised by optimised process times and quickly available reproductive results.

• LC display for amplitude, pulse level, time and power
• Pulse mode, AMPLICHRON^®-circuit
• Data memory
• Batch mode/sequencing
• Temperature display and measurement
• Remote control via PC RS 232
• Interference suppression

Also available as medicine product according to the guideline for in-vitro-diagnostica 98/79/EG.
For volumes 2 to 200 ml. Ready-to-operate set for volumes from 3 to 50 ml consisting of:

• HF generator GM 4200
• Ultrasonic converter UW 100
• Standard horn SH 100 G
• Titanium probe TS 103, diam. 3 mm

Further Titanium probes with diam. 2 mm, 4.5 mm, 6 mm, 9 mm and 13 mm available on request.

HF generator Dimensions (W x D x H):	GM 4200 150 x 335 x 220 mm
Converter	UW 100
Dimensions (diam. x L):	70 x 150 mm
Ultrasonic nominal power:	max. 100 W

Accessories Sonotrodes for ultrasonic homogenisers SONOPULS HD 5050 / SONOPULS HD 4000 series Accessories Ultrasonic homogenisers, SONOPULS, accessories

Suitable for homogenising, desagglomerating, emulsifying, suspending, accelerating chemical reactions or disruption of cells, bacteria, fungi or spores. The devices of the SONOPLUS 4000 series are characterised by optimised process times and quickly available reproductive results.

• LC display for amplitude, pulse level, time and power
• Pulse mode, AMPLICHRON^®-circuit
• Data memory
• Batch mode/sequencing
• Temperature display and measurement
• Remote control via PC RS 232
• Interference suppression

Also available as medicine product according to the guideline for in-vitro-diagnostica 98/79/EG.
For volumes 5 to 1000 ml. Ready-to-operate set for volumes from 20 to 900 ml consisting of:

• HF generator GM 4200
• Ultrasonic converter UW 200
• Standard horn SH 200 G
• Titanium probe TT 213, diam. 13 mm

Further Titanium probes with diam. 4.5 mm, 6 mm, 9 mm, 16 mm and 25 mm available on request.

HF generator Dimensions (W x D x H):	GM 4200 150 x 335 x 220 mm
Converter	UW 200
Dimensions (diam. x L):	70 x 150 mm
Ultrasonic nominal power:	max. 200 W

Accessories Sonotrodes for ultrasonic homogenisers SONOPULS HD 5050 / SONOPULS HD 4000 series Accessories Ultrasonic homogenisers, SONOPULS, accessories

Ultrasonic processing vessels. Plastic and Titanium alloy (TiAl6V4). For indirect ultrasonic irradiation. BB 6 fits directly to UW 200 / UW 2200. Microtube holder EH6. Stainless steel. For simultaneous, contact-free ultrasonic irradiation of up to 6 samples using the ultrasonic homogeniser HD 2200.2 / HD 4200 and ultrasonic processing vessel BB 6.

Alternative Glass sample vessels, Borosilicate glass 3.3 for Ultrasonic homogenisers SONOPULS Alternative Flow-through cell for SONOPULS Ultrasonic homogenisers, stainless steel

For manual operation or for stand use, frequency 30kHz, automatic frequency tuning system, amplitude adjustable 20% to 100%, pulse 0 to 100%, dry running protected, in portable case, with mounting for stand STH-16 and mounting tools, 230V a.c.

Accessories Accessories for Ultrasonic Processor UP50H/UP100H Accessories  Accessories  Accessories

For enlarging the length of the probe and to operate in deep vessels. They are mounted between standard or booster horn and titanium flat tip.

To reduce the noise level when sonicating samples with an ultrasonic homogeniser. The lower part of the interior and the removable bottom tray are made of stainless steel and are therefore chemically resistant and easy to clean.

• Noise reduction of up to 30 dB-AU
• LED interior lighting
• Acrylic glass window
• With effective ventilation system
• With opening (40 x 70 mm) for cooling tubing, sample circulation or the SONOPULS temperature sensor on the back
• Removable bottom tray
• Easy retrofitting for use with sonotrodes or cup booster possible

The stand HG 40 is required to attach the ultrasonic converter. Please order separately.

Accessories Ultrasonic homogenisers, SONOPULS, accessories

Suitable for homogenising, desagglomerating, emulsifying, suspending, accelerating chemical reactions or disruption of cells, bacteria, fungi or spores. The devices of the SONOPLUS 4000 series are characterised by optimised process times and quickly available reproductive results.

• LC display for amplitude, pulse level, time and power
• Pulse mode, AMPLICHRON^®-circuit
• Data memory
• Batch mode/sequencing
• Temperature display and measurement
• Remote control via PC RS 232
• Interference suppression

Also available as medicine product according to the guideline for in-vitro-diagnostica 98/79/EG.
For volumes 100 to 3000 ml. Ready-to-operate set for volumes from 500 to 2000 ml consisting of:

• HF generator GM 4400
• Ultrasonic converter UW 400
• Standard horn SH 400 G
• Titanium probe TS 425, diam. 25 mm

Further Titanium probes with diam. 13 mm, 16 mm, 19 mm, 32 mm and 38 mm available on request.

HF generator Dimensions (W x D x H):	GM 4400 150 x 335 x 220 mm
Converter	UW 400
Dimensions (diam. x L):	86 x 180 mm
Ultrasonic nominal power:	max. 400 W

Accessories Sonotrodes for ultrasonic homogenisers SONOPULS HD 5050 / SONOPULS HD 4000 series Accessories Ultrasonic homogenisers, SONOPULS, accessories Alternative Ultrasonic homogeniser, SONOPULS HD 4050 Alternative Ultrasonic homogeniser, SONOPULS HD 4100 Alternative Ultrasonic homogeniser, SONOPULS HD 4200

Ultrasonic homogeniser consisting of generator and transducer for flexible use in various laboratory areas. Ideal for sample preparation for cell disruption, homogenisation, dispersion and emulsification of samples. The ultrasonic homogeniser can be used both as a hand-held device and on a stand.

• Colour touch display
• Digital setting and control functions
• Automatic frequency tuning
• Amplitude and pulse adjustable
• Countdown timer from 0.1 s to 99 days
• Operation and control via LAN for display and remote control via browser without software installation on PC
• Ethernet interface
• Temperature display in °C and °F
• Data recording on internal SD card (1 GB)
• 2 LEDs for sample illumination
• Dry run protection

Scope of supply: Generator UP200St-G, transducer UP200St-T

Sonotrodes and stand material are not included in the scope of supply. Please order separately.

Amplitude range:	20 ... 100 %
Pulse range:	10 ... 100 %
Frequency:	26 kHz
Ultrasonic power:	200 W
Transducer dimensions (Ø x L):	45 x 230 mm
Titanium horn (Ø):	10 mm
Max. amplitude:	70 µm
Power supply:	100 ... 240 V, 50 ... 60 Hz
IP class:	IP 51 (generator), IP 65 (transducer)

Accessories Sonotrodes for ultrasonic homogenisers UP200Ht / UP200St, titanium Accessories  Accessories  Accessories  Accessories  Accessories  Alternative Ultrasonic Processor UP50H/UP100H Alternative Dounce homogenizers