-
- General laboratory consumables
- Occupational safety, Security
- Analytical measurement and testing
- Stirring, Shaking, Mixing
- Sample preparation
- Distillation, separation, filtration
- Heating and cooling technology
- Liquid Handling
- Vacuum technology, Drying, Dry storage
- Optical instruments and microscopes
- Cleaning and sterilisation
- Environmental-, soil-, water-, food analysis
- Chromatography
- Cleanroom
Syringe pumps
Grinding mill, A11 basic
Batch mill for 2 different grinding procedures:
Impact grinding of hard, brittle or non-elastic grinding materials with high-grade stainless steel beater. This beater can be used for a Mohs hardness up to 6 (incl. with delivery). Cutting grinding for pulverizing soft, fibrous materials with a cutting blade (not incl. with delivery)....
Accessories for Grinding mill, A10 basic
A 10.1 Cutter, stainless steel: For most brittle materials with a Mohs hardness up to 5.
A 10.3 Cutter, hard metal: Made from tungsten carbide for hard materials with a Mohs hardness up to 9.
A 10.2 Star-shaped Cutter, stainless steel: For specific lightweight materials like paper, dried plant parts, plastics and for smooth-elastic materials....
Accessories for Grinding mill, A11 basic
A 11.1 Spare beater: For pulverising substances with a Mohs hardness up to 6.
A 11.2 Cutter: For pulverising soft, fibrous grinding materials.
A 11.3 Beater, hard metal: For pulverising substances with a Mohs hardness up to 9, chrome-carbide coated
A 11.4 Grinding container, 250ml: ...
Accessories for Mixer MICROTRON® MB 550/MB 800
The mixing attachments MBA 125 to 1000 ml made of glass can be dismantled completely and easily.
The mixing attachments MBA 2000 and MBA 4000 are made of stainless steel. Their robust safety lids have an integrated feed opening for dosing. Knife unit with 4 blades made of stainless steel, easy to dismantle for easy cleaning....
Batch mills Tube Mill control / Tube Mill 100 control
Suitable for disposable and reusable grinding chambers. By using the disposable grinding chambers the possibility of cross-contamination and the effort of cleaning is eliminated. The mills can be used for hard (Mohs hardness up to 5), dry and brittle materials. They are especially suitable for grinding seeds, such as corn and wheat. Increased safety, the operation of the mill is only possible with properly closed grinding chamber and closed lid....
Cross beater mill SK 300
The cross beater mill SK 300 is used for batch-wise or continuous preliminary and fine size reduction. This robust mill is suited for laboratories as well as for the rough conditions of a production environment. Thanks to the powerful drive and rotor speed up to 4000rpm it is often possible to achieve a final fineness <100 microns in one process....
Cutting Mill SM 100 / 200 / 300
Rapid and gentle size reduction of bulky, soft, medium-hard, fibrous, elastic and thermally sensitive materials. The most powerful model, the SM 300, is especially suitable for cutting heterogeneous mixtures such as household waste, plastic materials, computer and electronic scrap. The mills are also used for organic materials like wood, roots, bones, plants and feed pellets. They can be equipped with various rotors and hoppers. The SM 300 features a variable speed which makes it perfectly adaptable to the particular application requirements....
Cutting mills PULVERISETTE 15 and Universal Cutting mills PULVERISETTE 19
Ideal for pre and fine comminution of soft to medium-hard as well as fibrous or brittle, tough materials. They are essential for the areas of plastics, textiles, agriculture and forestry, environmental, construction materials, chemistry and foodstuffs. All cutting parts can be removed for cleaning in just a few seconds without tools, unbeatable fast, simple and efficient. Variable rotational speeds, different rotors, various knife geometries and replaceable blades ensure maximum flexibility and durability. For controlling the abrasion properties, the cutting tools are offered in different materials. The optimum airflow ensures fast comminution and secure protection against clogging. The FRITSCH Cyclone seperators (optional) for sample exhaustion enable simple feeding due to the strong airflow, increase throughput, and reduce the thermal load of the samples....
Cyclone Mill TWISTER
Application:
The Cyclone Mill TWISTER is specially designed for the processing of foods and feeds for subsequent NIR analysis. The optimized form of rotor and grinding chamber generates an air jet which carries the ground sample through the integrated cyclone into the sample bottle. The air jet prevents the material from heating up, thus preserving the moisture content....
Disk mill PULVERISETTE 13 classic line
Ideal for intermittent and continuous fine grinding within the medium particle size range of soft to hard, tough and temperature-sensitive solids in the areas of mining and metallurgy, glass industry, ceramics industry, soil research, rocks and soils....
Dry Mill POLYMIX® PX-MFC 90 D
The PX-MFC 90 D is suitable for dry sample grinding in the laboratory. It"s possible to change the hammer and cutting mill sets.
- The blade grinding attachment is used for processing of dried, stringy and fibrous and grease-free materials. Application: Wood, straw, dried grease-free meat, leather, paper, carbon, synthetics etc.
- The hammer grinding attachment is used for processing of dried, brittle and grease-free materials. Application: Dried grain, dried beans, bones, rock, ceramics etc.
- Sieves 0.2mm up to 6mm diameter
- Safety system prevents start when lid is open
- Powerful three-phase motor
- Milling chamber with interchangeable inserts
- LED display
- Working volume of 300 ml (Funnel volume)
- 1000 Watt, 3-phase motor provides a low noise level during operation, with 230 Volt connection
- Sieves from 0.2 to 6 mm mesh size
- Integrated speed control with LED display for speed and status messages
- Speeds from 50 to 6,000 rpm for maximum grinding efficiency
- The motor cannot be operated when the chamber door is open
- Integrated overheating, overload and rotor blocking protection
- Safety stopper for certain grinding materials
Grinding mill, A 10 basic
Newly designed batch mill for grinding of hard, brittle, soft and fibrous materials for volumes up to 50 ml. Because samples may be embrittled directly in the grinding chamber; tough, oily and aqueous samples can also be grinded. During development of the mill, particular emphasis was placed on safety. The mill will only start when the lid is closed and it can only be opened at standstill. A quick stop feature further increases the safety of user....
High Energy Ball Mill Emax
The Emax is an entirely new type of ball mill for high energy milling for medium-hard, hard, brittle and fibrous materials. The combination of high friction and impact results in extremely fine particles within the shortest amount of time. Thanks to the cooling system with water, the high energy input is effectively used for the grinding process without overheating the sample. The Emax is capable of continuous grinding operation without interruptions for cooling down. The high energy input in combination with the unique cooling system provides perfect conditions for effective mechanical alloying or grinding down to the nanometer range....
Knife Mills GRINDOMIX GM 200 / GM 300
The Knife Mills Grindomix GM 200 and GM 300 are suitable for the rapid and reproducible size reduction and homogenisation of food and feed materials. They can process substances with a high water, oil or fat content just as quickly and reliably as dry, soft and medium-hard products.
- Very fast and reproducible grinding and homogenisation of foodstuffs, final fineness < 300 µm
- Speed-controlled industrial motor
- Autoclavable grinding tools
- Boost function allows short-term increase of speed up to 14000 rpm (GM 200)
- For sample volumes up to 700 ml (GM 200) or 4500 ml (GM 300)
- Digital display of grinding time and speed
- Interval operation possible
- Optional gravity lid for automatic adjustment of grinding chamber volume
- Storage of 4 program sequences possible (GM 200)
- 8 or 10 parameter combinations can be stored (GM 200 / GM 300)
- Drive power : ~ 1000 W (GM 200); continuous 1.1 kW, short term peak 3 kW (GM 300)
- Electrical supply data: 220-240 V, 50-60 Hz
Knife mill HM100
The HM100 knife mill is used for grinding soft, medium-hard, brittle and fibrous materials. Especially suitable for samples with a high water, oil or fat content. The 2 knives are driven by a 900 W motor to achieve a reliable grinding result. Suitable for applications in agriculture, biology, medicine and food technology....
Knife mill PULVERISETTE 11
For reproducible homogenisation of all common samples in food or feed testing, pharmaceuticals, chemicals and many other applications. The quietly operating knife mill is ideal for gentle grinding and homogenisation of moisty, oily and greasy as well as dry, soft, medium-hard and fibrous samples within seconds....
Microfine grinder drive MF 10 basic
Universal laboratory grinder, comprising powerful drive unit for use with a choice of accessory grinding heads. The user can choose between the impact grinding head for milling hard, brittle materials (see fig.) and the cutting head for processing fibrous material. The maximum granule size output can be set by using various insert sieves (with apertures between 0.25 mm and 4 mm) placed above the outlet. There is an NS29 standard ground joint at the outlet for attachment of receiving flasks....
Mini mill PULVERISETTE 23
Ideal for fine comminution of smallest quantities for wet and dry grinding as well as for cryogenic grinding. Its special spherical grinding bowl ensures much better performance in grinding, mixing and homogenising compared with similar models for example in chemical analysis, chromatography, mass spectrometry or x-ray structural analysis, preparation of samples for genetic research, homogenising of active ingredients, preparation of extracts in the forensic analysis, grinding of pigments and precious materials....
Mixer Mill CryoMill
The CryoMill is designed for the cryogenic size reduction of materials which cannot be ground at room temperature or whose composition would be changed by it. The grinding jar is cooled before and during the grinding process with liquid nitrogen through an integrated cooling system. Thus the sample is embrittled and its volatile components are preserved. The size reduction principle is the same as that of the well-proven Mixer Mill MM 400. The CryoMill can also be operated without the cooling system which makes it suitable for a wide range of applications....
Mixer Mills MM 400
The mixer mills are true laboratory "all-rounders". They have been developed specially for grinding, homogenising and mixing of small amounts of sample in only a few seconds. They are also perfectly suitable for the disruption of biological cells as well as for DNA/RNA recovery.
The MM 400 can also be used for cryogenic and wet grinding....
Mortar grinder PULVERISETTE 2
For wet and dry grinding of hard, medium-hard, soft, brittle and temperature-sensitive samples for analysis, quality control and materials testing. It even grinds difficult samples with a moist, fibrous or elastic structures using liquid nitrogen. And it"s also excellently suited for mixing or homogenisation of organic and inorganic solids or liquids....
Mortar Grinder RM 200
Suitable for dry and wet grinding of soft, brittle, hard and paste-like samples. Depending on the sample, amounts from approx. 10ml up to 190ml can be reduced in size, triturated and homogenised. With beech wood scraper (special accessory) for pharmaceutical and homeopathic applications. The RM 200 is exceptionally easy to operate and clean. With digital time control and performance display, scale for reproducible pestle setting, built-in automatic switch-off and rapid motor-stop....
Planetary Ball Mills PM 100 / 100 CM / 200 / 400
Planetary Ball Mills are suitable for mixing and grinding soft, medium-hard, extremely hard, brittle and fibrous materials. They are used whenever high degrees of fineness down to the submicron range are to be achieved in a very short time. In addition to dry and wet grinding, they are also suitable for colloidal grinding and mechanical alloying. Typical materials are minerals, ores, chemicals, ceramics, soils, household and industrial waste etc....
Planetary ball mills PULVERISETTE 5/6 classic line
Ideal for fast, loss-free fine grinding of hard, medium-hard, brittle and fibrous materials - dry or in suspension in the areas of geology, mineralogy, metallurgy, ceramics, materials research, mechanical alloying, pharmaceuticals, chemistry, biology, sample preparation for analysis.
Sample can be processed from a few mg to several kg at a wide range of fineness levels down to less than 1 µm. They are especially easy to operate and fast and easy to clean. Suitable for continuous, heavy duty usage and guarantee safe clamping of the grinding bowls....
Planetary ball mills PULVERISETTE 5/7 premium line
Ideal for high-performance grinding down into the nano range of hard, medium-hard, brittle and fibrous materials with extremely short grinding times dry, in suspension or in inert gas in the areas of nanotechnology, geology, mineralogy, metallurgy, ceramics, materials research, mechanical alloying/activation, pharmaceuticals, chemistry, biology, sample preparation for analysis. They are also the perfect choice for highly efficient mixing and homogenizing....
Rotor Beater Mill SR 300
The rotor beater mill SR 300 is ideally suited for use in the laboratory and for small series production due to its robust design and the possibility to process large sample volumes. Grinding chamber, feed hopper and material inlet and outlet are completely made of high-quality stainless steel. The variable speed of up to 10000rpm allows for adaptation to specific application requirements....
Universal mill MultiDrive basic / control
Universal mill for the pre- and fine comminution of hard, soft or fibrous samples.
- Adjustable interval operation
- Integrated cooling in the grinding bowl
- Ground product and coolant remain disconnected
- USB interface
MultiDrive control additionally with:...
Universal mill M20
Batch mill suitable for dry grinding of hard and brittle substances.
- Double-walled grinding chamber can be cooled with water through two hose adapters
- Removable grinding chamber, easy to clean
- Two grinding chambers can be alternately operated using one drive
- M 21 blade incl. with delivery
Variable Speed Rotor Mill PULVERISETTE 14 classic line
Ideal for fast, effective comminution of soft to medium-hard, brittle, fibrous materials, as well as difficult-to-mill and temperature-sensitive samples. Cryogenic grinding, dispersion and homogenisation are also one of the areas of operation. The variable speed rotor mill is an ultra-centrifugal mill with variable speed settings between 6000rpm and 20000rpm and automatic speed regulation for constant milling in the areas of analytic, biology, chemistry, agriculture and forestry, foodstuffs, plastics and textiles, pharmaceuticals, environment, RoHS. For optimal material feeding the Vibratory Feeder LABORETTE 24 (optional) is recommended....
Vibratory Disc Mill RS 200
The Vibratory Disc Mill RS 200 is suitable for the extremely quick, loss-free and reproducible grinding of hard, brittle and fibrous materials to analytical fineness. The grinding results achieve a high degree of reproducibility even after very short grinding times. The RS 200 is primarily used for sample preparation for spectral analysis....
Micro Ball Mill GT300
For grinding and mixing of hard, medium-hard, soft, elastic and fibrous samples. Also suitable for cell disruption and DNA/RNA extraction. The mill is designed for very short processing times and high sample throughput. The grinding containers carry out horizontal, circular-arc-shaped oscillations and the grinding balls ensure effective grinding and mixing of the sample....
Planetary Ball Mill BM40
For rapid grinding of soft, hard, brittle and fibrous materials down to a final fineness of less than 1 µm in laboratories and pilot plants. Also suitable for colloid grinding. Suitable for use in geology, mineralogy, metallurgy, ceramics, materials research, mechanical alloying, pharmacy, chemistry, biology and analysis preparation....
Centrifugal Mill FM200
For fine grinding, homogenising and mixing of soft, brittle, fibrous and hard samples in the laboratory and pilot plant. The high grinding efficiency is ensured by the high speed rotor and the ring sieve used. A final fineness of less than 100 µm can be achieved. The mill guarantees a high sample throughput and low-noise operation....
Mixer Mills MM 500
The mixer mills are true laboratory "all-rounders". They have been developed specially for grinding, homogenising and mixing of small amounts of sample in only a few seconds. They are also perfectly suitable for the disruption of biological cells as well as for DNA/RNA recovery.
The MM 500 is suitable for efficiently wet-mill samples to nanosized particles with only minor warming effects....
Tuck rotor with 24 teeth stainless steel
PO number | Package size | Price per package | |||
---|---|---|---|---|---|
9739066 This product of our assortment corresponds with your search. |
1 piece | Login / Register here |
|
6-blade rotor for 1390 rpm
RETSCH
PO number | Package size | Price per package | |||
---|---|---|---|---|---|
9739046 This product of our assortment corresponds with your search. |
1 piece | Login / Register here |
|
6-blade rotor for 695rpm
RETSCH
PO number | Package size | Price per package | |||
---|---|---|---|---|---|
9739045 This product of our assortment corresponds with your search. |
1 piece | Login / Register here |
|
Universal support stand for cutting and impact mills compl.
PO number | Package size | Price per package | |||
---|---|---|---|---|---|
9738429 This product of our assortment corresponds with your search. |
1 piece | Login / Register here |
|
Vibration vessel 3ml, two ports stainless steel, PTFE seal
Sartorius
PO number | Package size | Price per package | |||
---|---|---|---|---|---|
9651441 This product of our assortment corresponds with your search. |
1 piece | Login / Register here |
|
Container for 3 shaking tubes 2,2ml
Sartorius
PO number | Package size | Price per package | |||
---|---|---|---|---|---|
9651448 This product of our assortment corresponds with your search. |
1 piece | Login / Register here |
|
Holder for container 9.651.448/449
Sartorius
PO number | Package size | Price per package | |||
---|---|---|---|---|---|
9651450 This product of our assortment corresponds with your search. |
1 piece | Login / Register here |
|
Platform for 2 microtitre plates
Sartorius
PO number | Package size | Price per package | |||
---|---|---|---|---|---|
9651451 This product of our assortment corresponds with your search. |
1 piece | Login / Register here |
|