Chemical Sorbents

Universal chemical and oil binder for all liquids, also for solvents. Very high absorption capacity (up to 1:75 of aqueous solutions). Almost dust-free granules with colour indicator: colour changes to yellow in contact with acids, to red in contact with alkalis.
Disposal according to the pollutant recorded.
The safety data sheets of these products are available under www.llg-labware.com.

The sorbents have a high performance. Due to their new microfibre structure, they provide very high absorbing capacities. The light and absorbent material is easy to use and committed to absorb quickly and store the liquid. The absorbed liquid can be extracted, to be used again or to be disposed of separately. The optimal combination of features such as light weight, low volume, very high absorbance, easy handling and low sorbent disposal weight significantly reduces disposal costs in comparison to conventional binding materials. To reduce the final waste content, the used sorbets can be burnt.

Can be used to absorb a variety of lab chemicals:

• acids, such as acetic acid, hydrofluoric acid, phosphoric acid, nitric acid, hydrochloric acid, sulphuric acid
• alkalis, such as sodium hydroxide, potassium hydroxide
• hydrazine: N₂H₄
• hydrogen peroxide

Each kit has the optimal combination of different sorbents. Ready to use.
Quick and safe aid for accidental spillages of almost all hazardous liquids.

A fully disposable spill kit to clean up small chemical spills quickly, easily and without risk of injuries.

• Highly visible green colour.
• The autoclavable disposal bag is heat resistant up to 145°C and therefore guarantees a safe disposal of laboratory waste.
• Adsorbs chemicals, dangerous liquids, water & oil based fluids.
• Suited for spills up to 1.7L.
• The specially designed disposable brush is intended to sweep up any broken glass or debris allowing a safe clean up without risk of injuries.
• Thanks to the compact design, the SKH-MINI can easily be placed in areas where spills are most likely to happen.
• Protective gloves are powder free, have roughened fingertips, increased tear resistance and a good chemical resistance for more safety.

The Dräger-Tubes^® measuring system is the safe method for measuring pollutants in the soil, water and air. More than 500 substances can be measured in varying concentrations. The long-established principle of Dräger-Tubes^® is still the same. A defined volume of gas/air must be pumped through the sampling tube. This can be achieved by using the Accuro^® gas pump. On contact with the substance under test the reagent system contained in the tube reacts and displays a colour. The strength of the concentration of the substance is shown by the length of the colour band displayed and can be read directly from the scale. The Dräger-Tubes^® sampling system provides accuracy, efficiency, quick and easy handling. Over 250 tubes are available on request for all substances and measuring fields. Further sampling devices, diffusion tubes for long-term measurements as well as sampling systems with activated carbon tubes, ORSA collector and TDS thermodesorption tubes are also available.

A: Stored in photoLab^® S6, S12, photoLab^® 6000 Serie and photoLab^® Spektral
B: Stored in photoLab^® S12, photoLab^® 6000 Serie and photoLab^® Spektral
C: Stored in photoFlex^® and photoFlex^® Turb^®

Reagent-free tests:
Cu - copper plating bath, 690nm, 820nm - copper plating bath - B
CrO3 - chromium plating bath - chromium plating bath - B
Ni - nickel plating bath - nickel plating bath - B
HZ - Hazen colour - Hazen colour - B
IFZ - iodine number, 340nm, 455nm - iodine number - B
m-1 (DFZ) - colouring - FB445 - B, C
m-1 (DFZ) - colouring - FB525 - A, C
m-1 (DFZ) - colouring - FB620 - B, C
FAU - turbidity 620 - T620 - B
E - extinction - extinction - A, B, C
SAK - Spectral absorption coefficient at 254 and 436nm photoLab^® 6100 VIS (436nm) and UV-VIS photoLab^® 6600 (254/436nm)

Further tests on demand, range information is based on max. area and can also be smaller for photoFlex^®.

Highly accurate turbidity standards composed of suspended microspheres, suitable for Instrument calibration and control of all turbidity meters. Stable, shelf life of 2 years (from Date of Manufacturing). NIST traceable, US EPA approved and tested in compliance with ISO 7027. HDPE bottles of 100 ml.

Two ranges available:

• Ratio range for Ratio Turbidity Measuring instruments (measure of the scattered light from the sample at a 90° angle from the incident light, plus at additional angles (several detectors)
• Non Ratio for Non Ratio Turbidity Measuring instruments will measure the scattered light from the sample at a 90° angle from the incident light (one detector)