Search Product
- Labor arrow_right
-
Ingredients
arrow_right
- Th. Geyer
- chevron_right
- Ingredients
-
Portfolio
arrow_right
- Th. Geyer
- chevron_right
- Ingredients
- chevron_right
- Portfolio
-
Services
arrow_right
- Th. Geyer
- chevron_right
- Ingredients
- chevron_right
- Services
-
Eigenmarken
arrow_right
- Th. Geyer
- chevron_right
- Ingredients
- chevron_right
- Eigenmarken
- Downloads
- Shop
- Unternehmen arrow_right
- Karriere arrow_right
- News & Events arrow_right
- Homepage
- chevron_right
- Lab
- chevron_right
- Labware
- chevron_right
- Analytical measurement and testing
- chevron_right
- Material testing
- chevron_right
- Force measurement
-
- General laboratory consumables
- Occupational safety, Security
- Analytical measurement and testing
- Stirring, Shaking, Mixing
- Sample preparation
-
Distillation, separation, filtration
-
Distillation, synthesis
- Flasks with gound joint neck
- Components for reaction and distillation
- Flat ground flange reaction vessels
- KPG stirrer and bearings
- Dropping funnels
- Reflux condensers
- Distillation accessories
- Components for extraction
- Gas wash bottles
- Tubing adapters
- Standard ground stoppers
- Ground joints accessories
- Ground joints, attachable
- Stopcocks and valves
- Laboratory reactors
- Rotary evaporators
- Separating, centrifuging
- Filtration
-
Distillation, synthesis
-
Heating and cooling technology
-
Cooling
- Cryogenic tubes
- Cryogenic boxes
- Cryogenic racks
- Cryogenic accessories
- Biobanking
- Cryogenic storage tanks
- Liquid nitrogen-Accessories
- Dewar flasks
- Low and Ultra low temperature freezers
- Refrigerators and Freezers
- Refrigerators and Freezers ex protected
- Refrigerator and freezer accessories
- Dry ice instruments
- Ice machines
- Isolated transport boxes, cooling boxes
- Temperature regulators
- Heating
-
Cooling
- Liquid Handling
- Vacuum technology, Drying, Dry storage
- Optical instruments and microscopes
- Cleaning and sterilisation
- Environmental-, soil-, water-, food analysis
- Chromatography
-
Cleanroom
- Multi use clothing for clean rooms
- Disposable garments for clean rooms
- Eye protection for clean rooms
- Cleanroom gloves and fingercots
- Footwear (clean room)
- Wipes and swabs for clean rooms
- Paper and documentation for clean rooms
- Cleaning implements for clean rooms
- Clean room facilities and furniture
- Sterilisation for clean rooms
- ESD products
- Microelectronics
Force measurement
Filter
Hand protector grip HeatGuard
The LABSOLUTE® hand protector grip HeatGuard made of red silicone rubber is temperature-resistant from -50 - 250 °C and is the best protection for your hands against hot and cold surfaces. The two pockets for thumb and fingers fit every hand size. The nobs on the HeatGuard ensure that there is a safe, slip-resistant grip at all times. You can store the hand protector grip using one of the two eyelets....
-
1
The LABSOLUTE® hand protector grip HeatGuard made of red silicone rubber is temperature-resistant from -50 - 250 °C and is the best protection for your hands against hot and cold surfaces. The two pockets for thumb and fingers fit every hand size. The nobs on the HeatGuard ensure that there is a safe, slip-resistant grip at all times. You can store the hand protector grip using one of the two eyelets.
|
5-step irreversible temperature strips Thermax®
5-step irreversible temperature measuring strips covering the temperature range 29 to 290°C. Each strip measures 35 x 15mm....
-
1
5-step irreversible temperature measuring strips covering the temperature range 29 to 290°C. Each strip measures 35 x 15mm.
Safety Gloves Clavies®, Heat Protection up to 232°C
Soft, pliant, all-cotton terry cloth gloves are superb for handling hot objects out of the autoclave or oven, or for other heat protection in the lab, school or industry. Note: Gloves are not waterproof and should not be used to handle dry ice....
Soft, pliant, all-cotton terry cloth gloves are superb for handling hot objects out of the autoclave or oven, or for other heat protection in the lab, school or industry. Note: Gloves are not waterproof and should not be used to handle dry ice.
|
Safety Gloves Nomex®, Heat Protection up to 250 °C
Very supple, offering excellent movement. Knitted construction, without seams. Temperature resistant up to 250 °C. 1 pair per pack. Cat. II...
-
1
Very supple, offering excellent movement. Knitted construction, without seams. Temperature resistant up to 250 °C. 1 pair per pack. Cat. II
|
Safety Gloves uvex k-basic extra 6658, Cut and Heat-Protection up to +250°C
This coarse-knitted glove made of 100% Kevlar
® is lined with cotton, making it ideal for protecting the wearer against heat and cuts.
The combination of Kevlar
® and cotton guarantees good heat insulation and enables the handling of objects up to +250 °C without losing anything in terms of cut resistance. 1 pair per pack....
-
1
This coarse-knitted glove made of 100% Kevlar® is lined with cotton, making it ideal for protecting the wearer against heat and cuts.
The combination of Kevlar® and cotton guarantees good heat insulation and enables the handling of objects up to +250 °C without losing anything in terms of cut resistance. 1 pair per pack.
Characteristics:
- Very good protection against cut injuries
- Additional cotton cladding
- Comfortable to wear
Applications: metal processing, automotive industry, glass industry, foundries
Length: | 220mm to 270mm |
Colour: | yellow |
EN: | 388 (2 4 4 2 D), EN 407 (X 2 X X X X) |
|
Hand Protectors Hot Hand®
Made of thick-walled silicone.
Safe, non-slip protection against very hot or cold surfaces.
Measures 10 x 19 cm with durable silicone rubber construction that remains flexible from -57 °C to +260 °C. End pockets accept thumb and fingers to grasp objects.
Mitts have multiple studs with concave tips thus providing secure grip on virtually all hot/cold surfaces....
-
1
Made of thick-walled silicone.
Safe, non-slip protection against very hot or cold surfaces.
Measures 10 x 19 cm with durable silicone rubber construction that remains flexible from -57 °C to +260 °C. End pockets accept thumb and fingers to grasp objects.
Mitts have multiple studs with concave tips thus providing secure grip on virtually all hot/cold surfaces.
|
Protection Gloves CRYOLITE
CRYOLITE is a fully waterproof glove to protect the hand and forearm in operations that involve the use of liquid nitrogen (or other cryogenic gases) and heat.
Made by materials specifically designated for this application, it keeps the hands warm and dry for long periods of use. Tested, with success, by contact with liquid nitrogen (-195.82 ° C) for one minute and following test of flexibility (RCT method). Suitable for contact with Liquid Oxygen (Oxygen Index O.I. 25,4 external layer - Test Report 166/2016 Dipartimento di Ingegneria Padova....
CRYOLITE is a fully waterproof glove to protect the hand and forearm in operations that involve the use of liquid nitrogen (or other cryogenic gases) and heat.
Made by materials specifically designated for this application, it keeps the hands warm and dry for long periods of use. Tested, with success, by contact with liquid nitrogen (-195.82 ° C) for one minute and following test of flexibility (RCT method). Suitable for contact with Liquid Oxygen (Oxygen Index O.I. 25,4 external layer - Test Report 166/2016 Dipartimento di Ingegneria Padova.
The multilayered construction allows a high level of thermal protection, flexibility and dexterity from -200 ° C to 250 ° C. Cat. III
|
Protection Gloves Cryo Gloves® Standard / Waterproof
Developed to provide protection while working in very cold environments or handling ultra-cold objects and media (in the range of -160 °C). Especially for secure handling of dry ice (-79 °C), sample handling (-86 °C/-152 °C) and handling ultra cold specimens - those stored in the vapour phase of liquid nitrogen. According to normative EN 511, EN 420, EN 388,...
Developed to provide protection while working in very cold environments or handling ultra-cold objects and media (in the range of -160 °C). Especially for secure handling of dry ice (-79 °C), sample handling (-86 °C/-152 °C) and handling ultra cold specimens - those stored in the vapour phase of liquid nitrogen. According to normative EN 511, EN 420, EN 388, CAT. III
CAUTION: Not intended for immersion in liquid nitrogen or other liquid cryogens.
Cryo Gloves Waterproof : Additional seamless PTFE inner glove; unsurpassed protection against the danger of a longer stay in ultra-low temperatures down to -160 °C .
1 pair per pack.
|
Thermal protection glove TempDex 710 up to 125 °C
- Thin, anatomically-shaped glove ensures dexterity
- Excellent abrasion resistance: longer lasting
- Dot embossing for better insulation and better grip
- Cat. II
- Thin, anatomically-shaped glove ensures dexterity
- Excellent abrasion resistance: longer lasting
- Dot embossing for better insulation and better grip
- Cat. II
|
Cryo Protection Gloves CRYOKIT 400, CRYOKIT 550
Suitable for all work with liquid nitrogen and other cryogenic gases up to approx. minus 196 °C. Protects against cold and contact burns in case of leakage of liquid gas. The waterproof glove is made of a special elastic and laminated fabric.
Interior insulation: polyester multi-layer fabric ( 410 g / m...
-
1
-
2
Suitable for all work with liquid nitrogen and other cryogenic gases up to approx. minus 196 °C. Protects against cold and contact burns in case of leakage of liquid gas. The waterproof glove is made of a special elastic and laminated fabric.
Interior insulation: polyester multi-layer fabric ( 410 g / m2 ) and polyolefin porelle membrane.
According to normative EN 511, EN 420, EN 388, Cat III. Warning: Not intended for immersion in liquid nitrogen or other liquid cryogens.
1 pair per pack
|
Safety Gloves, Heat Protection up to 500 °C
- 5-finger glove
- Protection against contact heat short term up to 500 °C
- Made of aramide fabric with special insulation
- Usable on both sides
- Abrasion resistant
- 1 pair per pack
-
1
- 5-finger glove
- Protection against contact heat short term up to 500 °C
- Made of aramide fabric with special insulation
- Usable on both sides
- Abrasion resistant
- 1 pair per pack
Length: | 400mm |
EN: | 388, 407 |
|
Cryo-Temperature Protection Kit CRYO-TEMP-SHIELD®
Consisting of:
- 1 pair Cryo Gloves® Standard, size: optional, see table
- 1 x face protection shield with adjustable head mounting
- 2 x safety labels, 300 mm diameter, entitled "Face protection" and "Wear gloves"
- 1 x protection apron, Cryo Apron®, width: 610 mm, length: 1070 mm
Consisting of:
- 1 pair Cryo Gloves® Standard, size: optional, see table
- 1 x face protection shield with adjustable head mounting
- 2 x safety labels, 300 mm diameter, entitled "Face protection" and "Wear gloves"
- 1 x protection apron, Cryo Apron®, width: 610 mm, length: 1070 mm
|
Thermal protection glove TempDex 720
- Thin, anatomically-shaped glove ensures dexterity
- Guaranteed without silicone
- Excellent abrasion resistance: longer lasting
- Dot embossing for better insulation and better grip
- Knitted wrist
- orange
- Thin, anatomically-shaped glove ensures dexterity
- Guaranteed without silicone
- Excellent abrasion resistance: longer lasting
- Dot embossing for better insulation and better grip
- Knitted wrist
- orange
|
Safety Mittens, Heat Protection up to +500 °C
- Mitten
- Up to +900 °C contact heat short term
- Made of aramide fabric with special insulation
- Usable on both sides
- Abrasion resistant
-
1
- Mitten
- Up to +900 °C contact heat short term
- Made of aramide fabric with special insulation
- Usable on both sides
- Abrasion resistant
Length: | 400 mm |
EN: | 388, 407 |
|
Safety Gloves, Heat Protection up to 1000 °C
- 5-finger glove
- Protection against contact heat short term up to 1000 °C
- Made of aramide fabric with special insulation
- Usable on both sides
- Abrasion resistant
-
1
- 5-finger glove
- Protection against contact heat short term up to 1000 °C
- Made of aramide fabric with special insulation
- Usable on both sides
- Abrasion resistant
Length: | 400mm |
EN: | 388, 407 |
|
Thermal protection gloves TempCook 476, nitrile, up to 150 °C
Hygienic combined with effective thermal protection.
- Knitted thermal protection
- Palm with embossed texture
- Fluid-proof
- Resistance to oils, greases and principal detergent products
- Food-safe
- 1 pair per pack
Hygienic combined with effective thermal protection.
- Knitted thermal protection
- Palm with embossed texture
- Fluid-proof
- Resistance to oils, greases and principal detergent products
- Food-safe
- 1 pair per pack
Length: | 450 mm |
Colour: | white |
CE: | Cat. III |
|
Safety Gloves, Heat Protection up to max. +700 °C
Heat-resistant gloves for protection of the operator when loading or removing hot materials at furnaces....
-
1
Heat-resistant gloves for protection of the operator when loading or removing hot materials at furnaces.
|
Cold-resistant gloves TempIce 700
Thermal protection gloves
- Flexible, knitted cuffs
- Special Grip & Proof nitrile coating
- Cold protection down to -10 °C
- Comfortable to wear, dexterity and flexibility
- Color: blue / black
Thermal protection gloves
- Flexible, knitted cuffs
- Special Grip & Proof nitrile coating
- Cold protection down to -10 °C
- Comfortable to wear, dexterity and flexibility
- Color: blue / black
|
Protection Gloves Waterproof Cryo-Grip® Gloves
Waterproof Cryo-Grip ® Gloves offer improved grip on small objects while protecting your hands and arms when working in hazardous, ultra-cold environments. Gloves are designed to provide a high level of thermal protection where the exposure to cryogenic fluids might exist. Made from state-of-the-art materials and a multi-layered construction, the gloves are designed to keep you dry and to wick moisture away from your hands, so you can work in comfort for extended periods of time and allows a maximum level of grip, dexterity, flexibility, and thermal protection - essential features when function is important and safety is critical....
-
1
Waterproof Cryo-Grip® Gloves offer improved grip on small objects while protecting your hands and arms when working in hazardous, ultra-cold environments. Gloves are designed to provide a high level of thermal protection where the exposure to cryogenic fluids might exist. Made from state-of-the-art materials and a multi-layered construction, the gloves are designed to keep you dry and to wick moisture away from your hands, so you can work in comfort for extended periods of time and allows a maximum level of grip, dexterity, flexibility, and thermal protection - essential features when function is important and safety is critical.
1 pair per pack.
CAUTION: Not intended for immersion in liquid nitrogen or other liquid cryogens.
wrist length: | 280 - 330 mm |
forearm length: | 335 - 395 mm |
elbow length: | 440 - 500 mm |
shoulder length: | 620 - 695 mm |
Safety Mittens, Heat Protection up to +650 °C
- Mitten
- cut resistant, soft, flexible
- Up to +650 °C contact heat short term
- Made of aramide fabric with special insulation
- Usable on both sides
-
1
- Mitten
- cut resistant, soft, flexible
- Up to +650 °C contact heat short term
- Made of aramide fabric with special insulation
- Usable on both sides
Length: | 400 mm |
EN: | 388, 407 |
|
Safety Mittens, Heat Protection up to +500 °C
- Mitten
- cut resistant, soft, flexible
- Up to +500 °C contact heat short term
- Made of E-glass fabric
- Usable on both sides
-
1
- Mitten
- cut resistant, soft, flexible
- Up to +500 °C contact heat short term
- Made of E-glass fabric
- Usable on both sides
Length: | 400 mm |
EN: | 388, 407 |
|
Safety Mitten, Heat Protection up to 750 °C
- Mitten
- Protection against short-term contact heat up to 750 °C
- Double isolated
- Usable on both sides
- Abraison resisitant
- Material: E-glass fabric with silicone coating
- One size fits all
- Mitten
- Protection against short-term contact heat up to 750 °C
- Double isolated
- Usable on both sides
- Abraison resisitant
- Material: E-glass fabric with silicone coating
- One size fits all
Length: | 400 mm |
EN: | 388, 407 |
|
Heat protection coat
- up to 1000 °C radiation heat
- made of preox-aramid-aluminium high vacuum coating approx. 260 g/m²
- very soft quality
- heat resistant hook-and-loop fastener and stand collar
- insulated press button on both sides
- length approx. 1200 mm
- DIN EN ISO 11612
- up to 1000 °C radiation heat
- made of preox-aramid-aluminium high vacuum coating approx. 260 g/m²
- very soft quality
- heat resistant hook-and-loop fastener and stand collar
- insulated press button on both sides
- length approx. 1200 mm
- DIN EN ISO 11612
Other sizes available on request.
|
Heat Protective Gloves, up to +250 °C
Kevlar is a material with universal properties, one of them being a very high resistance to thermal loads. Kevlar can protect against temperatures up to around 300 °C (physical contact) and 450-500 °C (radiant heat). Additionally, this Kevlar glove is very durable and does an excellent job of protecting against cut and puncture injuries. Double knit (two-layer) construction. Length approx. 40 cm, with knitted cuffs for better fit....
Kevlar is a material with universal properties, one of them being a very high resistance to thermal loads. Kevlar can protect against temperatures up to around 300 °C (physical contact) and 450-500 °C (radiant heat). Additionally, this Kevlar glove is very durable and does an excellent job of protecting against cut and puncture injuries. Double knit (two-layer) construction. Length approx. 40 cm, with knitted cuffs for better fit.