Half masks

Half masks have a very wide range of applications. They are a simple and inexpensive way to protect you against aerosols, vapours, gases, microorganisms, viruses and and similar hazards. The respirators are available with replaceable or integrated filters, as disposable or reusable products. Most of the FFP2 or FFP3 type fine dust masks for single-use by Dräger, 3M, Ekastu and other brands follow EN 149:2001.

Filter

 Respirators Aura™ 9300+ Series, Folding Masks

3M

Particle masks Series 3M ™ Aura ™ 9300+ offer effective respiratory protection in industrial applications where workers are exposed to dust and / or non-volatile liquid particles.

Features and advantages of the Aura™ 9300+ series

  • Clear vision: Embossed top panel helps reduce fogging of eyewear
  • Low breathing resistance filter technology combines the benefits of 3M"s electret particulate filter material with advanced low breathing resistance filter technology
  • 3M™ Cool Flow™ Valve effectively removes heat build up to provide a
...

 Respirators 8000 series, Moulded Masks

3M

These filter classes are minimum requirements and simply serve as a guide. It is the wearers" responsibility to make sure the breathing apparatus conforms to the requirements in terms of hazardous materials and concentration before use!

FFP 1: for particles that are neither toxic nor associated with fibrosis. For protection up to 4 times the corresponding threshold limit value...

 Premium Respirators 8825+ and 8835+, Moulded Masks

3M

Respirators Premium 8825+ and 8835+ moulded masks offer the new patented 3-dimensional face seal with integrated nose profile of 3M Premium+ Series, the convenience of a disposable mask as well as the concept of tailormade face seal of reusable respirator masks: Flexible 3-dimensionality for an individual and securely sealed fit! The face seal of the mask 8825+ and 8835+ improves the sealing fit. The profile of the respirator directs the air escaping through the filter medium away from the face. The upward air flow is minimized as much possible reducing fogging of safety glasses....

 Respirators with 2-Way-Protection Aura™ 1883+, Folding Masks

3M

The 3M™ Aura™ Health Care Particulate Respirator 1883 + provides effective respiratory protection for use in medical environments where health care workers will be exposed to airborne dust particles, non-volatile liquid particles and bio-aerosols. This respirator limits the transmission of infectious agents from staff to patients and is suitable for use during surgical procedures and certain other medical procedures....

 Filtering facepiece Mandil

EKASTU

DIN EN 149:2009. Filtering half masks of the mandil range stand out owing to their low weight, innovative precast, low breathing resistance and high level of comfort (available with or without Cool Down exhalation valves). The innovative Cool Down valve is a one-way valve that offers easy exhalation for cool, dry comfort. The foamlined nose area with flexible nose clip enables the mask to fit tightly yet comfortably on the skin....

 Respirators silv-Air c, Moulded Masks

UVEX

These filter classes are minimum requirements and simply serve as a guide. It is the wearers" responsibility to make sure the breathing apparatus conforms to the requirements in terms of hazardous materials and concentration before use!

FFP 1: for particles that are neither toxic nor associated with fibrosis. For protection up to 4 times the corresponding threshold limit value...

 Respirator Comfort program 8300 series

3M

The 3M™ 8300 Series Respirators are one of the latest additions to the respiratory protection range. With them, you can enjoy a comfortable cushion-fit", facing hard work from a soft place. The 3M 8300 Series respirators have been designed with comfort in mind. The super-soft, cushioned lining provides instant yet lasting comfort; whilst the robust design makes the 3M 8300 Series Respirators tough and durable - all this helps to increase user wearabilty. 3M offers a comprehensive range of respiratory protection - you can choose from different protection levels and styles that best suit your needs....

 Half Mask, DUETTA

BartelsRieger

Tested to EN 140 standards and certificated according to PPE guideline 89/686/EWG. With double filter connection. Plastic mask body with soft, sealing surface. Elastic adjustment straps with head gear.

  • One mask size fits all face shapes
  • Excellent field of vision, unrestricted freedom of movement and outstanding comfort
  • Superior balance through double filter technology
  • Non-allergenic
  • Optimal sealing provided by newly designed sealing rim
  • Easily dismantled for cleaning and maintenance
  • One-piece headband for optimal fit
  • Simple and secure filter attachment with bayonet connection
...

 Half Mask Series 6500QL

3M

The 3M™ Rugged Comfort Half Facepiece Reusable Respirator is designed with tough and dirty worksites in mind. Stay productive and protected - the 6500QL Series delivers comfort, durability and stability with a firm, lightly textured silicone faceseal and strong body construction.

  • Optimum fit and comfort with three-size adjustable head cradle
  • Bayonet Connection, Compatible with all bayonetstyle 3M™ cartridges and filters
  • Overmolded/Low-Profile Design
  • Cool Flow™ Valve
  • Directs exhaled breath and moisture downward
  • Easy positive pressure seal check
  • Provides comfort and stability with a soft but firm faceseal
  • Quick Latch - Drop-Down Mechanism
...

 Half Mask Series 7500

3M

The 3M ™ 7500 Series Half Masks are made of skin-friendly silicone and feature "Drop-down"-Ribbons. These encircling ribbons allow you to take off the mask easily in short breaks and leave it hanging in front of the chest instead of having to take it off completely .

  • "Drop-Down" ribbons
  • Elastic, adjustable ribbons
  • Patented 3M ™ Cool Flow ™ exhalation valve
  • Perfect sealing fit by structured face sealing
  • Double filter system for reduced breathing resistance and good weight distribution
  • Wide range of spare parts and filters
  • 3 sizes - fitting for every face shape
  • Compatible with 3M ™ Goggles
...

 Half Mask, Series 4000+

3M

The 3M™ Maintenance-Free Reusable Half Mask, 4000+ Series incorporating a newly engineered valve assembly that helps reduce exhalation-breathing resistance by over 30 %.

  • Maintenance-free construction
  • Easy to fasten neck strap
  • Ready to use
  • Low profile design for better peripheral vision
  • Lightweight, well balanced design
  • Soft, non-allergenic material with textured face seal
  • Central position of the exhalation valve for effective removal of heat
  • Use until damaged, particulate filters clog or gas filters become saturated
  • Very good compatibility with panoramic eyeshield 3M™ 2890 and 2890SA
...

 Filters for DUETTA half mask

BartelsRieger

(According to EN 143 and EN 14387)...

 Half Mask 620 N and 620 S

BartelsRieger

All masks approved according to EN 140 and certified according to council directive 89/686/EEC. Standard thread connection according to EN 148-1 which allows cost-efficient use of standard screw-filters besides insert filters and reusable holders. The masks can be used as pure filtration device and also as a mask for light airline systems. Two exhalation valves ensure low respiratory resistance. Ergonomic design of the mask bodies and sealing zone as well allow one single size of mask for all faces....

 Respiratory Protection - Plug-In Filters for Half Mask 620 N and 620 S

BartelsRieger

Tested and approved to EN 143 / EN 14387 standards with CE mark. Insert filters are connected to the mask by a filter adapter. The filter adapter is fitted with thread connector acc. to EN 148-1. Particle filters consist of a light PE housing with a built-in glas fibre filter. Special folding provides a large filter surface area in a confined space. A pre-filter collects aerosol mist and dust and prevents rapid accumulation of dirt particles in the main filter, thereby prolonging its lifespan. Easy to exchange by inserting into the outer chamber of the filter mount. Flame resistant....

 Half Mask Polimask 330

EKASTU

  • with standard thread connection acc. to DIN EN 148-1
  • mask body with exhalation valve and chin support
  • made of soft EPDM
  • especially suitable for use over prescription spectacles
  • the connector allows the half mask to be used with screw filters up to 300g, pressure hose devices and turbo unit respiratory systems
...

 Half Mask Series 6000

3M

Economical and easy to wear. The 3M™ 6000 Series half masks have a good price and performance ratio. They are low- maintenance, easy to handle and extremely lightweight . Available in 3 sizes.

  • Extremely lightweight mask body
  • Unobstructed view due to compact design
  • Double filter system for good weight distribution
  • Wide range of filters for a variety of uses
  • Compatible with 3M ™ goggles
...

 X-plore® 3300, 3500 and 5500

Dräger Safety

Safe and easy bayonet connection. A unique two-point bayonet connector
attaches both filters to the mask using the same technique. Compact, low-profile design. The swept-back position of the filters guarantees a wide field of vision free from obstruction and ensures optimal fit for use under protective visors. Three sizes (S, M, L) ensure a perfect fit for every type of face. High grade materials provide extreme comfort when worn. Innovative, X-guided, strap system. Cross-over straps ensure an even weight distribution....

 Filters for half mask polimask 230

EKASTU

Particle filter 230 P3R D*

  • protection against particles of toxic and highly toxic substances
  • with innovative BIOSTOP treatment
Multi type combined-filter 230 A2B2E2K1-P3R D*
  • protection against organic gases and vapours with a boiling point > 65°C, inorganic gases and vapours, sulphur dioxide, ammonia and particles as well as particles of toxic and highly toxic substances (P3), with innovative BIOSTOP
...

 Filters for polimask BETA half masks

EKASTU

Gas Filter 200 A1

  • Protection against organic gases and vapours with a boiling point > 65°C
Particle Filter 200 P3R D*
  • Protection against particles of toxic and highly toxic substances, with innovative BIOSTOP
Multi-type Filter 200 A1B1E1K1...

 Fine Dust Filtering Half Mask silv-Air High Performance

UVEX

FFP 3 - climatec half-mask High Performance with triple cavity system

  • triple cavity system for maximum filter performance with lowest breathing resistance
  • extended operation because of the larger filter surface incorporating two additional cavities
  • effective regulation of the temperature in the mask by climatec - comfort
  • innovative, shape-optimised design
  • highest safety (certified according EN149 safety-level FFP3)
  • anatomical design and soft-compound edges avoid bruising to the face
  • easy to differentiate by colour coding (black - FFP3)
  • compatible with safety spectacles because of the optimised nosebridge
  • circulatory venting via the soft-compound edges prevents fogging of safety spectacles
  • seamless, continuous headband for comfortable and secure mask fit
  • flexible textile headband with neck clip for individual adjustment
...

 Half mask, Polimask BETA

EKASTU

  • double filter half mask made of EPDM offering optimum protection during any type of activity
  • 2 inhalation valves minimise the inhalation resistance
  • 1 large exhalation valve ensures low exhalation resistance
  • comfortable head harness with neck clip
  • by turning the filter holder it is possible to change the angle of vision or expand the field of vision
  • careful airflow routing allows use with spectacles
...

 Half Mask, Polimask 230

EKASTU

  • filter connection special thread 95 mm
  • broad, supple inner sealing lips guarantee close fitting
  • made of soft EPDM
  • special construction ensures a large field of vision and low breathing resistance
  • especially suitable for use over prescription spectacles
...

 Half masks silv-Air c, foldable

UVEX

  • foldable shape with V-shape-seam for perfect adaption to the facial structure
  • innovative shape-optimised design
  • anatomical design and soft material - edges avoid bruising
  • compatible with safety spectacles because of the optimised nose-area
  • seamless, continuous headband for comfortable and secure mask fit
...

 Respirators Aura™ 9300+Gen3, Series, Folding Masks

3M

The 3M™ Aura™ Particulate Respirator 9300+Gen3 Series is now the third generation.
The new Cool Flow™ Comfort Valve opens 37% easier than the original Cool Flow™ valve, allowing 36% more air, together with its natural heat, to be expelled more rapidly

  • Cool Flow™ Comfort Valve
  • Ease of positioning
  • Braided headbands
  • Colour coded for easy identification (FFP1 = yellow, FFP2 = blue, FFP3 = red)
  • 3M™ Advanced Electret (Filter) Media (AEM)
  • Embossed top panel helps re-direct exhaled air, reducing fogging of eyewear
  • Large soft nose foam material and smooth inner cover
  • Hygienic individual packaging helps protect the respirator from contamination before use
  • 3M Safe Guard™ Product Authentication Process
...

 Filter mask X-plore®1700

Dräger Safety

Filter material CoolSAFE™ for protection against solid and liquid non-volatile particles. Odour versions with additional activated carbon layer against nuisance organic odours below the limit value.
All versions meet the conditions of the EU guideline 89/686/EWG and are permitted as particle filtering half masks, in accordance with EN 149:2001. They already meet the increased requirements of the coming revision of EN 149:2001 + A1:2009 (test of filter performance for aerosol exposure with 120 mg paraffin oil). Australian Standard AS/NZS 1716:2003 certified (SAI Global)....

Add to shopping cart